Benutzeranleitung / Produktwartung AVerTV Galaxy des Produzenten AVerMedia
Zur Seite of 124
AVerTV 6.3 User Manual English DISCLAIMER All the screen shots in this documentation are only e xample ima ges. The images may vary depe nding on the product and software v ersion. Information presented in this documentation has been carefully che cked for reliability; however, no responsibility is assumed for inaccuracies.
i Table of Contents Chapter 1 Device Intr oduction ...................................................................................... 1 Chapter 2 AVerTV 6 In troduction ..............................................................................
ii 4.1.1 Scanning Channels .............................................................................................................. ...................... 36 4.1.2 Scanning Channels (F or Adva nced Users) ........................................
iii 5.2 How to Auto Scan FM Radio Channels ............................................................................................. ............... 77 5.3 Manually Scanning Sp ecific FM Channels....................................................
iv 10.1 Adding Schedules ............................................................................................................... ............................ 102 Chapter 11 Customer Service .....................................................
1 Chapter 1 Device Introduction Thanks for purchasing AVerMe dia’s product. The table below li sts an overview of the product you purchased. From this tabl e, you can quickly learn about your produ ct features and know whi ch chapter you need to read.
2 Appendix ; Hot Keys ; Editing EPG Import Files ; Satellite Internet Access ; Universal DVB Plug-in (for Microsoft XP / Vista M CE only) ; Video Gaming Plug-in (for Microsoft Vista MCE only) ; Video Quality Enhancement Plug-in (f or Microsoft Vista MCE only) Note DVB is a registered trademark of the DVB Project.
3 Chapter 2 AVerTV 6 Introduction Now, with this product , you can watch TV, listen to the radio, record your favorite programs and enjoy other features on your PC.
4 Chapter 3 Introducing the AVerTV Application The AVerTV 6 application allows you to watch TV o r video, and record still or motion video on your PC while you work on y our computer. 3.1 Launching the AVerTV 6 Application Run the AVerT V 6 application from the Programs menu.
5 3.2 Running the AVerTV 6 application for the first time If this is your first time running th e application, the Setup dialog box will appear to prompt you to scan for chann els. (For detail s, please refer to th e section Scannin g Channels ). Note: Using the application in Russi a, scanning for channels m ay be skipped.
6 (This picture is only for reference) 3. Click New and the Program List d ialog box will app ear. Type in the desirable n ame and click OK . 4. Click Program Scan to search for available ch annels/programs in your area. (This picture is only for reference) 5.
7 3.2.2 Scanning for Digital Satellite Programs 1. Select Digit al TV on the left pane o f the Setup dialog box. 2. Choose the switch type that is used by your satellite system. (This pict ure is onl y for reference. ) 3. From the Satellite drop-down list under Input 1, Input 2 , Input 3 , and/or Input 4 , choose the correct sa tellite.
8 (This pict ure is onl y for reference. ) • None : If you do not use any LNB device, cho ose this option. • Universal Ku Band LNB or C Band LNB : Choose this option if your LNB d evice is this type.
9 (This pict ure is onl y for reference. ) If you choose Custo m… in step 3 ab ove, please keep doing the follo wings steps for setup: 1. Click Edit to configure the satellite information. 2. In the Satellite Info rmation dialog box, ty pe in the satellite’ s name in th e Satellite b ox.
10 (This pict ure is onl y for reference. ) • None : If you do not use any LNB device, cho ose this option. • Universal Ku Band LNB or C Band LNB : Choose this option if your LNB d evice is this type.
11 3.3 Introducing the User Interface The TV monitor allows you to watch live TV or video. 1 Panel On / Off 8 Channel Up/Down 2 Playback Seek Slider 9 Resize Window 3 Play / Pause 10 Show / Hide Video.
12 3.4 The Control Panel The table below d escribes the fun ctions of the buttons on the Control P anel. BUTTON FUN CTION 1 Channel Loop Return to pr eviously accessed channel. 2 Multi-Channel Preview Display 4 ~ 64 consecu tive TV channels on the TV Mon itor window.
13 18 Next File Play the next file in the playlist. 19 TimeShift / Pause Performs b ackground recording of the live TV progr am. This function lets you view the recorded parts, while at the same time, recording is in progress. / Freeze the playba ck temporarily.
14 3.5 Remote Control You can use remote control to turn on/off the pr ograms, select channels, adjust volume and so on. Note: To control two or more th an two cards/dev ices with a remote co ntrol, it is reco mmended to enable the multiple infrared receiver function fi rst.
15 3.5.2 Remote Control Buttons (Model 2) Button Description 1. POWER Turn on/off t he application. 2. NUMERIC BUTTONS - Select a TV channel. - Un der the Multi-Channel Preview mode, use ← ↑ → ↓ to highli ght the intended channel. 3. CH RTN Go to the previously selected channel .
16 17. (Rewind) - Rewind the p layback. - Ju mp to the Teletext page of the corresponding color according to this button. 18. ● (Record) Switch to PVR m ode and record the current program or video i nto your hard drive. 19. MUTE Turn on/off the sound.
17 3.5.3 Remote Control Buttons (Model 3) Button Description 1.Power Turn on/off the application 2.Numeric Buttons - Select a TV channel. - Under the Multi-Channel Preview mode, u se ↑↓← → to high light the intended channel. 3.CH RTN Go to the previ ously selected channel.
18 16. (Rewind) - Rewind the playback. - Jump to the Teletext page of the corresponding color accord ing to this button. 17. ● (Record) Switch to PVR mode and record the current program or video into y our hard drive. 18. MUTE Turn on/off the sound.
19 3.5.4 Remote Control Buttons (Model 4) Button Description 1. POWER Turn on/off the application 2. SOURCE Switch between available signal sources. 3. Numeric Buttons - Select a TV channel. - Und er the Multi-Chann el Preview mode, use ↑↓← → to highli ght the intended channel.
20 3.5.5 Remote Control Buttons (Model 5) Button Description 1. SOURCE Switch between available signal sources. 2. FULL SCREEN Display TV in full screen. 3. ● (Record) Switch to PVR mode and record the curre nt program or video into your hard drive.
21 3.5.6 Remote Control Buttons (Model 6) Button Description (1) Turn on/off the application. (2) Turn off/on the sound. (3) Use numeric buttons to select a channel.
22 (6) Main Screen : Use the arrow button to navigate all on-screen items. Use OK to confirm the selection. (This function is only available for AVer MediaCenter) PIP Mode: Change size or position of the selected screen by the arrow buttons. (This function is only available for AVer MediaCenter) (7) Volume up / Volume down.
23 (21) Capture an image or a continuous sequence of images. (22) Main Screen : A shortcut to the main menu--“Pictures”. (T h i s f u n c t i on i s o n ly available for AVer MediaCenter) Teletext Mode : Jump to the teletext page of the corresponding color according to this button.
24 3.6 Resizing the TV Monitor Window To enlarge or r educe the size of the TV Mo nitor windo w, click and drag the lower right corner of th e window. Double-click the TV Monitor window to displa y it in full screen or click th e Full Screen button on the Cont rol Pa nel.
25 (This picture is only for reference.) 3. Then press the Sl eep button on the remote control repeat edly to set the execution time. OR, 1). Right-click on the TV monitor, point to Sleep a nd select the desired m ode. 2). Right-click on the TV monitor again, point to Sleep and choose an execution time.
26 (This picture is only for reference.) 3.9 Minimize the Application To minimize AVer TV application to the syst em tray (notification ar ea), click the Setup button and in the Set up dialog box, click Miscellan eous icon on the left pane. Then Select the Minimize to Tray check box.
27 (This picture is only for reference.) 3. Click Apply to save the settings. 4. Click Clear All to delete all defini tions of the remote control or click Default to revert to the factory setting. Note : For the following s ituations, p lease select RM_USB_FP from the Type drop-down list to re- define a function for a certain button: 1.
28 3.11 Customize the Remote Control Source Button On the Remote Source Control pag e, you may customize the remote control “Source” button to switch on the selected item. 1. Click the Setup button an d in the Setup dialog box, select Input Setting in the left p ane.
29 3.12 Customize Definitions of the Mouse To re-define the mouse: 1. Click the Setup button and in the Setup dialog box, select Input Setting in the left pan e. Then click on the Mouse icon on the left pane. 2. To re-define a function for a certain button, select Wheel Up , Wheel Down or One-Clic k and the desired item from the drop-down l ist.
30 3.13 Customize Definitions of the Keyboard (Hot Keys) Note : It is recommended to use an unass ign ed key to use as your new keys . You can use the default hot key s or create your own hot keys. To re-define the shortcu t keys: 1. Click the Setup button .
31 3.14 Changing the OSD Attributes Click the Setup button and in the Setup dialog box, click the Personalise icon on the left pane. On this pag e, you can cu stomize th e curtain ef fect, LCD sp eed, or appe arance of th e TV monitor and the control panel skin.
32 3.15 Configurations Import and Export After setting up the d evice, all configuration s ca n be saved as a fi le (.adi). Thus, resetting-up is unnecessary unless the adi. file has b een removed. 1. To export the file of all configurati ons, press Export button, and the Save As Dialog will appear for users to select the sav ing path.
33 (This picture is only for reference) 3. Select Enable Graphic Equalizer check box to enable the function. 4. Then choose the desired music style from the drop-down list . 5. If you just want t o adjust sound effects of one specific channel, select Configure the settings only for single channel and repeat step 3 and step 4.
34 (This picture is only for reference) 2. In the Playback area, select t he output to use from the drop-down menu. 3. In the Record area on the same page, you can sel ect the input source to use from the drop-down menu.
35 Note : The input and output choices in the drop-down menu of the Playback and Record area may not be exactly the same in different PCs. Pl ease select the correct and corresponding input an d output individu ally to ensure better p layback and recording quality.
36 Chapter 4 TV In this chapter, we will introduce methods to scan programs, select a TV/Radio program, create a group and so on. 4.1 Analog TV 4.1.1 Scanning Channels If you didn’t complete t he channel scann ing when you first ran the application, p lease follow these steps t o complete t his procedure.
37 The application comes with a default frequency table therefore the applicat ion will use this table to search for active chan nels/progr ams. I f you want to te rminate th e searchin g process, just click Stop. 5. You can check the scanning progress from th e progress bar.
38 3. When a warning mes sage appear s, click Yes to continue the procedure or click No to abort this operation. 4. After scann ing, new active channels/prog rams will b e memorized and listed in the left pane of the dialog box. 5. Click Apply to s ave the scann ed channels.
39 (This picture is only for reference.) 5. Click New and the Format dialog box appears. In the Format dialog box, select the file format you want and en ter the desi red name in the text box . Click Next . 6. In the Video dialog box, you can set the vide o format and audi o format.
40 4. Click Add . If you choose th e WMA/WMV files, you will see the following Record Format dialog box. (This picture is only for reference.) 5. Here you can create your preferred video a nd audio config urations for video recording. Then, click Save Æ Finish .
41 (This picture is only for reference.) 7. Here you are able to set the video /audio format as y ou wish. Then click Finish . 8. Click Apply to sav e the setting and click OK to exit the current dialog box.
42 AVI AVI is the mo st common video fil e format fo r playback o n the computer . It can be saved in unco mpressed form if you want high quality video, or compressed using any of the available codecs if you want to min imize the file size. WAV A common audio file format for Wi ndows co mputers.
43 (This picture is only for reference.) 4. Then double click on the space un der File Format to select the file format (.ndx or .avr) from the drop -down list. (This picture is only for reference.) 5. Then double click on the sp ace below File to choose the de signated file to ins ert.
44 (This picture is only for reference.) 6. Click Import button to complete EPG im port. 7. Then click Apply to save th e imported EP G. Not e : Each file r efers to the TV pro grams of one c hannel. Not e : After importi ng analog EPG fo r the first time, t he channels you’ve cho sen to import will be saved and listed i n the EPG Mappin g List.
45 (This picture is only for reference.) 4. Click Apply to sav e the import ed EPG. Note : The Index file format (.idx) can be edited by users. For more information, please refer to Chapter 12: Appendix . Note : After you import the index file, you can still add m ore EPG files (*.
46 (This picture is only for reference.) 3. Then use , or the slider to adjust Brightness , Contrast , Hue , Saturation and Sharpness until you get an accurate color. 4. If you just want to adjust color of o ne specific chann el, select Configure the settings only for single channel and repeat step 3.
47 4.1.6 Enhancing the Video Quality This function can reduce noise. Choose an appropriate opt ion listed below. z Video Qual ity Enhancement Enabl e: Acti vate to improve the video quality. z Video Qual ity Enhancement Disable: Disable t he video quality enhancement function.
48 (This picture is only for reference.) 3. From the De-Interlace drop-down list , try all the options to compare which can give y ou the best quality.
49 4.2 Digital Satellite TV To know how to scan digital sa tellite programs, please refer to 3.2.2 Scanning for Digital Satellite Programs . When you cannot find th e sat ellite in setup page, then you can try importing a frequency table or adding frequency manually .
50 (This pict ure is onl y for reference. ) 3. Click New and the Program List d ialog box will appear. Type in the desirable name and click OK . (This pict ure is onl y for reference. ) 4. Click Import and the Import dialog box will appear. (This pict ure is onl y for reference.
51 (This pict ure is onl y for reference. ) 7. Then determine how to import the data file by choosing the desired import options. The options are explained below: Import to program list This option will add the program data from the imported file int o the selected input port’s program list.
52 (This pictu re is only fo r referenc e.) Not e: All programs automatically classify into two categories (Digital TV and Digital Radio ). Sele ct Digit al TV to displa y TV pro grams; select Di gital Radio to di splay ra dio programs.
53 4.2.2 Scanning channels (Adding Frequencies Manually) You can add new frequencies one by one if you do not want to import any existing satellit e channel data. 1. Click the Setup button and in the Setup dialo g box, select an av ailable AVer Media device in the left pane.
54 7. Then check y our LNB’s config urations. Please refer to 3.2.2 Scanning fo r Digital Satellite Programs for more information. 8. Click OK to exit the dialog box. 9. Select Pr ograms under the Digital TV icon, and click Prog ram Scan to obtain the program data.
55 4.3 Digital TV 4.3.1 Scanning Channels If you didn’t complete t he channel scann ing when you first ran the application, p lease follow these steps t o complete t his procedure. 1. Click the Setup button and in the Setup dialog box, select an available Avermedia device in the left pane .
56 (This picture is only for reference.) Note: Digital Channel s that are in red t ext indicate they are locked channels (eg. Adult channels). 4.3.2 Scanning Channels (For Advanced Users) 1. Click Advance located at right-lower corner in the P rogram In formation se ction.
57 listed in the left p ane of the dialog b ox. 6. Click Apply to s ave the scann ed channels. 4.3.3 Customize Video Record Settings To customize the video record settings, please do the following. 1. Click the Setup button and in the Setup dialog box, click o n the Digital T V icon on the left pane.
58 (This picture is only for reference.) 4. Click Add . You will see the follo wing Record Format dialog box. (This picture is only for reference.) 5. Here you can create your preferred video a nd audio config urations for video recording. Then, click Save Æ Finish .
59 4.3.4 Using the EPG Function Electronic Program Guide (EPG ) is a service that allows you to check the next succeeding program schedule and even the p rogram s chedules of the whole week. If th e EPG servi ce is provided in your region/c ountry, simply click the EPG butto n to open the EPG window.
60 4.3.5 Fine Tuning Color of the Display If the color or pi cture quality of the TV display needs to be adjusted, please do th e following. 1. Right click on the TV monitor. When a pop-up menu appears, select Individual Channel Set ting . Or c lick Program List button on the control panel and then click Individual Channel Setting button .
61 2. To hide the subtitle, p lease right click th e TV screen, point to Cancel Subtitle and choose Exit ..
62 4.4 Adding and Deleting Program Lists Selecting a program list allows you to switch bet ween the channels of the selected program list only when pres sing the Channel Up/Dow n button. If you want to add or delete a program list, do the following: To add a new program list: 1.
63 4.5 Selecting a TV/Radio Channel There are three way s of switching bet ween TV/Radio chann els: ◆ Click the Channel U p/Down buttons ( on the TV monitor window or on the Control Panel) repeatedly until reaching yo ur desired channel. ◆ Click to open the Numeric Panel (as shown at right) .
64 3. When a dialog box appears, click New bu tton . 4. Specify the desired n a me in the text box. (This picture is only for reference.) 5. Hold down Sh ift or Ctrl key and click the channels fro m the list to select your o wn channe l line up, then click to add your selection to the d esired group.
65 (This picture is only for reference.) 5. If you just want to adjust individual volume level, sel ect Configur e the settings o nly for single channel and repeat step 3 and 4 to increase or decrease volum e. 6. To apply the converted settin gs to all channels, click Apply All button .
66 4.9 Modifying A Program List Name You can change a program lis t name easi ly. To rena me a program list, follow th e steps described below: 1. Click th e Setup button and in the Setup dialog box, click Analog TV or Digital TV icon on the left p ane.
67 4.10 Removing Unwanted Channels If you want to ex clude unwan ted channels f rom your channe l list, do the following: 1. Click the Setup button and in the Setup dialog box, click th e Analog TV or Digital TV icon on the left pane. 2. Click Advance locat ed at the right-l ower corner in th e Program Informa tion section.
68 2. Clear the En able check box so th at you will not access that channel when you press Channel Up/Do wn buttons. 3. However, you can stil l see the chan nel in your program li st. If you wan t to watch that channel agai n some day just select t he Enable check box.
69 9. Clear Overcan check box if you wan t to disable overscan function. You can see the difference from the pictures below: Before using OverScan function After using OverScan function 4.12 Using Magic Video Effect (Preview Onl y) The magic video effect c an avoid disto rtion when r esizing an image to any aspect rat ios.
70 You can see the difference from the pictures below: Original Image Before using Magic Video Effect function After using Magic Video Effect function Note: The Magic Video Effect function can only be enabled in full-screen mode and when screen aspect ratio is unequal to source aspect ratio.
71 The multi-channel previe w function can disp lay 4~64 TV channels on -screen at the same time. (By default, 16 TV ch annels will be display ed. ) You can see clearly which TV pro grams are currently sh owing on these ch annels. To select the chann els for previ ew: 1.
72 To modify the multi-ch annel preview setting s: 1. Click the Setup button and in the Setup dialog box, select Multi-Channel Preivew on the left pane. 2. Here you can determine preveiw cell nu mb ers from the drop-down list (2x2~8x8). 3. You can also sp ecify the previ ew delay ti me (1~99 se c) in the text box.
73 (This picture is only for reference.).
74 4.14 Changing Signal Source There are two way s to change signal source: ˙ To switch between TV and ra dio / external video signals, click th e Radio Source button or Video Source button on the control p anel. ˙ Right click on the left pane of the control p anel and a pop-up menu appears.
75 1. Right click on the TV monitor. When a pop-up menu appears, select Individual Channel Set ting . Or c lick Program List button on the control panel and then click Individual Channel Setting button . 2. When a dialog box ap pears, select Color Adjustment tab.
76 Chapter 5 FM Radio 5.1 FM Radio Controls Click the FM Radio button to listen to y our favorite radio station programs. Use the following button controls for selec ting FM radio channels, adju sting volume, scanning FM ch annels, record ing radio programs and more.
77 5.2 How to Auto Scan FM Radio Channels If this is your first time to use FM radio, perfo rm auto scan to search an d memorize active FM radio stations in y our area. To auto scan FM radio stations: 1. Click the Setup button and in th e Setup dialog box, select an av ailable AVerMedia device in the left pane.
78 1. Click the Setup button and in the Setup dialog box, click FM Radio icon on the left pa ne. 2. Enter the channel frequ ency that you want to start scanning in the text box. 3. Select 0.01 MHz, 0.05MHz or 0 .1MHz as your tuning incremen t. 4. Click to scan upward or to scan downward fro m the select ed channel frequency .
79 1. Right click on the TV monitor. When a pop-up menu appears, select Individual Channel Set ting . Or c lick Program List button on the control panel and then click Individual Channel Setting button . 2. When a dialog box ap pears, select Audio tab.
80 5.7 Adding a Radio Frequency If the desired channel cannot be found through scanning, fo llow the instructions below. 1. Click the Setup button and in the Setup dialog box, click FM Radio icon on the left pane. 2. Specify the correct frequency in the text box (as shown at right) and click Save .
81 5.9 Modifying a Radio Name You can manually modify any exiting FM radio channel. 1. Click the Setup button and in the Setup dialog box, click FM Radio icon on the left pane. 2. Double click on Name column of the exi sting FM channel whi ch you want to mod ify.
82 5.10 Adding and Deleting Program Lists Selecting a progra m list allow s you to switch be tween the c hannels of the selected program list only when pressing the Channel Up/Down button. If you want to add or delete an FM channel group, do the following: To add a new program list: 1.
83 6. Click Sav e to save th e settings or cl ick Cancel to abort without savi ng. If you want t o delete the un wanted gro up, simply cli ck Delete 5.
84 8. Click Apply to sav e the setting and click OK to exit the curr ent dialog box. To abort this operation, click Cancel . Not e : To determine the length of recording and to choo se a destination folder in whi ch to save the record ed audio, please refer to the section titled Record ing Settings in Chapter 7.
85 Chapter 6 TimeShift The TimeShift function performs background record ing of a TV/Radio program, and lets you return and watch any part of the record ed program. At th e same time, th e live TV/Radio program continues to be recorded and played back so you won’ t miss any pa rt of the show .
86 (This picture is only for reference) 2. By default, TimeShift p erforms recording of the TV prog ram by creating a temporary video file and deletes this file once you click the Stop button. 3. In the Record section, you can determine your file n ame format, reco rding time, file size and destination fold er.
87 (This picture is only for reference) 4. Click Default if you want to revert t o the factory settings. 5. Click Apply to sav e the new settings and click OK to exit the current dialog box.
88 6.3 Using the TimeShift Function To pause the liv e program: 1. Click the TimeShift button on the Control Panel. The application will b egin to record the program. 2. When you want to rewind , use the Playback Seek slid er bar to move back to the part you want to watch or l isten again.
89 Chapter 7 PVR You can use your computer as a dig ital video recorder, and record y our favorite TV programs or capture video from an external source to your hard drive. Yo u can also divide the recording files in proper sizes to facilitate burning onto remov able optical med ia, such as CD-R and DVD disc s.
90 7.2 Recording Settings Before recording, check if the settings meet your need s. 1. Click the Setup button . In the Setup dialog box, click the Storage icon on the left pane. 2. By default, the sy stem is set the recording “Dat e” and “Time” as the file na me format.
91 (2) To add more video files to the pl ay back list, first navigate the file on the left pane to find the folder that contains the d esired video files. When you have loca ted the folder, the media files will then b e displayed on the ri ght top pane.
92 3. In fast-forwarding playback mode, Play button will be sho wn as Pause . Click Pau se button to temporarily freeze the play back and click ag ain Play button to continue playback. 7.5 Picture-in-Picture Display With the picture-in-picture window feat ure, you will be able to play back recorded video files, and at the same time, watch live TV.
93 Chapter 8 Image Capture While you watch TV or a recorded video on your PC m onitor, you can use the AVerTV 6 applic ation to capture images for your documents, presentations or web page s. 8.1 Before Capturing Before you start capturing images , first set the d estination folder for saving captured images.
94 (This picture is only for reference.) 2. From the File Format drop-down menu, select the format for saving the captured image. 3. Choose the Colo r format. The options h ere depend on the file format you choose. • Choose 24-bit to capture image in 16M colors.
95 • If yo u want to set your own image size, select Customize and enter the image Width and Height . If you want to maintain relative width and height, select the Keep Ratio option. Choose a measurement unit from the Unit drop-down list. You can specify any image size you want.
96 (This picture is only for reference) 2. In the Numb er of Pictures box, specify the nu mber of images you want to captu re. 3. In the Interval Ti me box, specify the interv al between captures. For instance, if you specify 10 seconds, an image will be cap tured every 10 seconds.
97 Chapter 9 Teletext (PAL/SECAM only) T eletext makes TV viewing a unique experien ce. It allows y ou to view teletex t broadcasts from your television programs to get th e most updated information on TV Schedules, News, Stock Market Prices, Concert & Theatre inform a tion and so on.
98 9.2 Overview Click the Telete xt button on the control p anel to open th e Teletext applicat ion as shown below. For more informati on about Teletext, pl ease see below in this chapter. 1 2 3 4 5 BUTTON FUNCTION 1 Menu Bar This contains the names of the available drop-down list option me nus.
99 9.3 Toolbar Buttons Lock Sub page Locks the curren t sub page. The up coming transmitted sub pages will b e stored in the Tel etext Cache for l ater use.
100 The newly sel ected page nu mber will appea r on the upper left co rner of the page. So metimes, this m ay take a while to retrie ve the ne wly selec ted Te letext page. There wil l be no c hanges on the page when th ere is no page data transmitted with the n umber you have selected.
101 4. Enter a filename and click OK. Opening a Teletext Page 1. Choose Open from the File menu or press Ctrl+O . 2. From the Open dialog box, select the file containing the teletext page you want and click Open . Opening Another Teletext Window To open another tele text window, choose New Wind ow from the File menu or pre ss Ctrl+W .
102 Chapter 10 Scheduler The Sched uler allo ws you to cr eate a list of preset schedules for watching and recording your favorite TV/Radio program s. You can set the day and time to re cord the TV/R adio program and specify the length of recording. To run this application, click the Schedule button on the Control Panel.
103 (This picture is only for reference) 3. Type the desir ed name in the Schedule N ame text box. 4. From the Function d rop-down list, select Activate AV erTV to watch a TV prog ram or listen to a radio broadcast. Otherwise, select Record to save a TV/Rad io program for future viewing/listening.
104 Not e : If you choose Watch TV from the drop-down list, after completi ng the Silent Record task, the icon will appear on the task bar (the lower right corner of the screen). Just double-click this icon, y ou can immediately watch liv e TV or listen to the radio.
105 Chapter 11 Customer Service The AVerTV application provides a convenient t ool, which allows users to ob tain product information and service easily via our web site. Please make sure th at you have already connected to the Internet. To do this: 1.
106.
107 Appendix ¾ Hot Ke ys The following is the default def inition: Hot Key Description Function UP/DOWN ARROW Channel or Frequency Up/Down Press to go to the next upper/lower TV/Radio channel. Back / L Channel Loop Press to go to the previously accessed TV/Radio channel.
108 Page Up Previous page Go to the preceding Teletext page. Page Down Next page Go to the succeeding Teletext page. Home Home page Go the Teletext home page. Note : To customize th e definitions of the Keyboard (Ho t Keys), please refer to the section Customize Definitions of the Keyb oard (Hot Keys) .
109 ¾ Editing EPG Import Files • EPG File Mapping (Index File *.idx) The EPG inde x file (* .idx) are pro vided to enha nce user c onveniency of im porting EPG files (*avr a nd *.ndx ). Each EPG file (*avr or *. ndx) contains E PG data o nly for one chan nel.
110 Country Value (location) Москва region Russia Санкт - Петербург Not e : The abbreviati on of country na me is based on ISO 3166 alpha- 3. Example: 1. First create a file named "MyEpg.idx". 2. Then edit the file as below.
111 • Editing AVerMedia EPG File Fo rmat (*.avr) If you want to import the EPG files for those channels without EPG files provided , you can make it yourself.
112 The standard for program type. Available types are shown as below: 0 Undefined Content 6 Music 1 Movie / Dram a 7 Arts 2 News 8 Social 3 Show 9 Education 4 Sports 10 Leisure type (Optional) 5 Youth 11 Special Parentrating (Optional) The programs can be watched or li stened above this age.
113 <averepg > <ch name = "EPSN"> <program> <title>Trav el news</title> <description> Introduction all available travel lines.
114 ¾ Satellite Internet Access Satellite Inte rnet Access allows u sers to get fa ster connect ion to the internet via s atellite. S imply follow the steps b elow: If you are using one specific sate.
115 Different lamp indicates diffe rent status: ˙ Dark Red indicates your satellite configuratio n is at wrong setting. ˙ Dark Green indicates the satellite signal is available but no Internet data transmission occuring that time. ˙ Light Green indicates you have connected to the Internet successfully.
116 ¾ Universal DVB Plug-in Some devices, such as AVerTV Satellite PCI / AVerTV Satellite Hybrid + FM, are shipped with a “Universal DVB” plug-in program for W indows XP or Vista Media Cen ter Ed.
117 4 4 . . Select the vide o source you w ant to view via “Video Gaming Plug In” . 5 5 . . Click button to view images in a full- screen window. Press ESC to exit the full- screen mode.
118 ¾ Video Quality Enhancement Plug-i n (for Microsoft Vista MCE only) MCE “Video Quality Enhancement Plug-in” support is for Vista MCE only. Afte r installing the driver, you can access it through the program library in Online Media .
119 5 5 . . Use the following buttons to adjust the value of the item. • • Decrease Brightness and Hue values by 32. • • Decrease Contrast and Saturation values by 16. • • Decrease Sharpness value by 8. • • Decrease Brightness and Hue values by 16.
Ein wichtiger Punkt beim Kauf des Geräts AVerMedia AVerTV Galaxy (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AVerMedia AVerTV Galaxy noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AVerMedia AVerTV Galaxy - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AVerMedia AVerTV Galaxy reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AVerMedia AVerTV Galaxy erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AVerMedia AVerTV Galaxy besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AVerMedia AVerTV Galaxy verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AVerMedia AVerTV Galaxy. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AVerMedia AVerTV Galaxy gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
