Benutzeranleitung / Produktwartung 5100RS des Produzenten Scytek electronic
Zur Seite of 48
GALAXY 5100RS SERIES VEHICLE SECURITY SYSTEM WITH REMOTE START W W ITH SEPER A A TE LOCK/UNLOCK B U T T O N S PRODUCT MANUAL.
L i m i t e d L i f e t i m e W a r r a n t y This vehicle security system is warranted to the original purchaser , to be free from defects in material and workmanship.
1. About Y our System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1 2. Remote T ransmit ters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
The ScyT ek Galaxy 5100RS Series is a Combination Vehicle Security and Remote Starting System featuring a built -in "ScyNet Network Port" that allows direct connection of optional accessory modules and a PC interface off ering expanded system operation.
The 2-wa y Color remote transmitter is off ering increased range and confirmation of any activ ated feature. Page 1 Button 1 Arms and Locks* the system and when held for 5 seconds, activ ates the system’ s Panic f eature. Button 1 also locks the doors when the system is in V alet Mode.
Galaxy 5100RS - Page 3 Press and hold Buttons 2 and 3 until pager progr am features are displayed. Select pager setting by pressing buttons 2 or 3 to highlight the pager . Press button 1 to select the pager . Setting Date & Time Select Time Date setting by pressing buttons 3 or 4 to highlight the f eature.
Use buttons 3 & 4 to highlight the time par ameter you wish to change, use buttons 1 & 2 to scroll up or down to chage the time. Save the changes by pressing but ton 5. Setting Alarm Clock Select Alarm setting by pressing buttons 3 or 4 to highlight the f eature.
Galaxy 5100RS - Page 5 Return to Previous Screen Select Previous Screen by pressing buttons 3 or 4 to highlight the feature. Press but ton 1 to select it. Press and hold Buttons 2 and 3 until S ystem program features are high-lighted. Select system setting by pressing buttons 3 or 4 to highlight the pager .
Setting AutoStart Cold Temperature Threshold Select Cold T emp start setting by pressing buttons 3 or 4 to highlight the f eature. Press button 1 to select it. Use buttons 1 & 2 to scroll up or down to chage the temper ature threshold. Save the changes by pressing button 5.
Galaxy 5100RS - Page 7 Select Clock Sync set ting by pressing buttons 1 or 2 to highlight the pager . Press button 3 to select the pager . * * Not available on the Galaxy 5100 Select Alarm History by pressing buttons 3 or 4 to highlight the feature. Press but ton 1 to select it.
Galaxy 5100RS - Page 8 Pressing and holding transmit ter button 5 will scroll through sever al transmitter progr ammable options - TEMPERATURE, ENABLE COLD START, ENABLE HOT START, VALET MODE, ENABLE AUTOSTART 1, ENABLE AUTOSTART 2. TEMPERATURE Check the temper ature inside the vehicle 1.
Page 9 - Galaxy 5100RS Transmitter Lockout Press and hold buttons 4 & 2 simultanously for 3 seconds to lockout the tr ansmitter against accidental transmission. Release Transmitter Lockout Press and hold buttons 4 & 2 simultanously for 3 seconds to release the transmit ter from Lockout.
Galaxy 5100RS - Page 10 Time: time of day clock Date/Engine Run Timer: date, or engine run minute timer if remote start activ ated (20 min max). Battery Status: displays remaining battery life.
Standard Remote Transmitter Description Depending on the model chosen, the Galaxy 5100RS Series will be supplied with one or two T5 or T5-SP 5-button R emote T ransmitters that are used to control the system’ s operations.
Page 12 - Galaxy 5100RS Adding/Replacing Standard Remote Transmitters T o replace lost or stolen transmit ters or to add additional transmitters into the system, ha ve all desired transmit ters ready and follow the steps below . Note : Up to 4 one-wa y transmitters can be progr ammed to operate the system.
2-way LCD Remote Transmitter Description Depending on the model chosen, the Galaxy 5100RS-2W Series will be supplied with one or two 2-wa y LCD R emote T ransmitters, off ering increased range and confirmation of an y activated features.
Page 14 - Galaxy 5100RS 3. Press and release Button 1 on the first tr ansmitter then on the second transmit ter . · The siren/horn will chirp/honk once for every tr ansmitter learned. 4. T urn off the ignition key . 5. The siren/horn will chirp/honk 3 times to indicate the system has exited programming mode.
Galaxy 5100RS - Page 15 T o set the daily start feature: 1. Press and hold Buttons 2 and 3 until the remote beeps four times. · The fan and clock will be shown indicating daily start mode is entered. 2. Press Button 2 until the desired hour is displayed.
Galaxy 5100RS - Page 16 CHP Set the siren/horn confirmation chirps/honks ON or OFF : 1. Press and hold Button 5 until the display shows CHP . ·The tr ansmitter will beep three times.
Galaxy 5100RS - Page 17.
Page 18 - Galaxy 5100RS Remote Arming/Locking The system monitors 5 independent areas ( zones ) while armed: doors, hood/ trunk, shock sensor , optional sensor input, and the network port for future expansion. T o Arm and Lock the System: 1. T urn off the ignition.
Galaxy 5100RS - Page 19 Tamper Alert If the system was triggered while awa y , the LED will flash to indicate which zone triggered the system after disarming and turning the ignition ON.
Page 20 - Galaxy 5100RS Panic Mode In the event of an emergency , the transmitter’ s remote Panic feature can be used to instantly trigger the alarm/panic feature. T o activ ate the Panic Mode: 1. Press and hold Button 1 for fiv e seconds. · The alarm will sound.
Galaxy 5100RS - Page 21 3. Press the valet switch 4 times. · The siren will chirp each time the valet switch is pressed. 4. Within 5 seconds, press Button 3 on the tr ansmitter . · The siren will chirp 3 times. 5. Press the valet switch the number of times equal to the desired code (from 1-15).
Page 22 - Galaxy 5100RS Remote Starting T o Remote Start the S ystem: 1. Be sure the system is not in V alet Mode. 2. Press and hold Button 4 for three seconds. · The parking lights will flash 4 times and turn on. · The siren/horn will chirp/honk 4 times.
Galaxy 5100RS - Page 23 Automatic Start Mode Automatic Start feature has three modes that will start the vehicle every one or two hours within a 24 hour period. 1. Timer Only Mode (factory def ault) The Automatic Start feature starts the vehicle automatically ev ery one or two hours and runs for the preset Run Time.
Page 24 - Galaxy 5100RS Model: Galaxy 5100RS-M 1- T ach wire must be connected , The system must learn RPM. 2- Hand brak e must be connected. 3- Door trigger must be connected 4- Clutch override installed NOTE: MUST USE RELAY, SEE PAGE 26.
Galaxy 5100RS - Page 25 E x t e n d e d F e a t u r e s Ignition Door Locking F or added safety , the Ignition Door Locking feature allows v ehicles equipped with power door lock systems to automatically lock the doors when the ignition is turned on.
Page 26 - Galaxy 5100RS 1. Thoroughly read and become familiar with the installation instructions bef ore beginning the installation. 2. Review system contents: Main Unit 1 or 2 One-wa y 5 Button Remo.
Galaxy 5100RS - Page 27 Mounting the Control Unit The control unit must only be mounted in the interior of the vehicle. Do not mount the main unit in the engine compartment.
Page 28 - Galaxy 5100RS S y s t e m W i r i n g 6-Pin Starter Harness Pin 1 RED WIRE A : Main Power Input A (+). Connect to the battery or constant power wire at the ignition switch with a minimum 25 Amp supply . R emo v e the fuse until the installation is complete and all wiring is check ed.
Galaxy 5100RS - Page 29 Pin 11 VIOLET WIRE : Positiv e Door Input (+). Connect to the door switch circuit wire that shows +12V when the door is open. This type of door circuit is usually found on F ord vehicles. Pin 12 GREEN WIRE : Negative Door Input (-).
Page 30 - Galaxy 5100RS Galaxy 5100RS - Page 30 2-Pin White Connector: Located on the side of the main module. · Green WIRE - P arking Brake Input (-) F or Manual T ransmission and/or vehicles equipped with a turbo charged engine. Must be connected if using the T urbo Timer feature and/or Manual T ransmission remote start feature.
Galaxy 5100RS - Page 31 Page 31 - Galaxy 5100RS Entering System Programming This system is compatible with both the LCD two wa y transmitter or the standard tr ansmitter , all system programming can be perf ormed using either one. T o enter System Progr amming: 1.
Page 32 - Galaxy 5100RS Galaxy 5100RS - Page 32 the ignition is turned off . The Ignition Door Locking f eature may be programmed to unlock all doors or the driver’ s door only . If driver ’ s door only is selected, the optional Passenger Unlock wire must be connected.
Galaxy 5100RS - Page 33 Page 33 -Galaxy 5100RS 10. Ignore Open Door Report. Bypasses the open zone w arning chirps for vehicles equipped with a residual dome light circuit that remains on for a period of time after closing the door . 11. Aux 2 Auto Activate with Arm.
Page 34 - Galaxy 5100RS Galaxy 5100RS - Page 34 T ach Monitor mode: monitors the vehicle’ s tach wire (or a fuel injection wire) in real-time to determine engine status and adjust starter crank time automatically . Gas Engine. Sets the engine type for Gasoline.
Galaxy 5100RS - Page 35 Page 35 -Galaxy 5100RS R e l a y D i a g r a m s P ositive Dome Light Activ ation Negative Dome Light Activ ation P ositive Horn Honk Negative Horn Honk Starter Defeat/Anti-Gri.
Page 36 - Galaxy 5100RS Galaxy 5100RS - Page 36 Negative T rigger R everse P olarity V acuum Adding Actuators F ollow the diagrams below for connecting basic door lock systems. F or T wo Stage door lock systems (separately unlocks driv er and passenger doors) see following pages.
Galaxy 5100RS - Page 37 Page 37 - Galaxy 5100RS T w o S t a g e D o o r L o c k D i a g r a m s T wo Stage Negative T rigger T wo Stage P ositive T rigger The Galaxy 5100RS Series is equipped with a dedicated P assenger Unlock output allowing T wo Stage Door Lock operation.
Page 38 - Galaxy 5100RS Galaxy 5100RS - Page 38 T w o S t a g e D o o r L o c k Diagrams c o n t ’ d T wo Stage R everse P olarity T wo Stage Adding Actuators.
Galaxy 5100RS - Page 39 FCC ID: OARRXAM2000 This device complies with P art 15 of FCC Rules. Operation is subject to the f ollowing two conditions: 1) This device may not cause harmful interference.
Page 40 - Galaxy 5100RS S t a r t e r D i a g n o s t i c s Starter doesn’t start and parking lights flash: 3 Times - Engine RPM not detected (check tach wire and/or perform tach learn procedure) Ho.
Galaxy 5100RS - Page 41.
Page 42 - Galaxy 5100RS.
Galaxy 5100RS - Page 43.
ScyTek Electronics 11627 Cantara Street North Hollywood, CA 91605 www .scytek.net © ScyT ek Electronics 2008 Galaxy 5100RS 1-04-08 W i r i n g D i a g r a m ScyNet Blue Aux St art (-) / T urbo T imer.
Ein wichtiger Punkt beim Kauf des Geräts Scytek electronic 5100RS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Scytek electronic 5100RS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Scytek electronic 5100RS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Scytek electronic 5100RS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Scytek electronic 5100RS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Scytek electronic 5100RS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Scytek electronic 5100RS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Scytek electronic 5100RS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Scytek electronic 5100RS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
