Benutzeranleitung / Produktwartung VPC-CG9GX Xacti des Produzenten Sanyo
Zur Seite of 220
VPC-CG9EX VPC-CG9 VPC-CG9GX INS TRUCTION MANU AL Digital Movie Camera Please read th ese instructions carefully b ef ore using the camer a. Make sure to read and understand the separ ate booklet “SAFETY MANU AL ”. K eep this manua l in a saf e place f or later refer ence.
i English Symbols used i n this ma nual HINT P oints giving some e xtended instructions or special point s to pa y attention to . CA UTION P oints that require special at tention.
English ii SHOO T , PLA Y B A CK AND SA VE Prepare the battery pack 1 Char ge the battery pa ck. The CHARGE indicator shows t he battery pack charge status . h Lights red during rechar ging. h T ur ns off when battery pack is fully charge d. h The charging time is appro x.
iii English SHOO T , PLA Y B A CK AND SA VE Before capturing those impor tant shots, be sure to first take a test shot to conf irm that y our came ra is set up and re ad y to go i Sany o declines an y claim f or compensation f or recorded contents etc.
English iv Playbac k When y ou are finishe d using the camera.. . Press the ON/OFF button f or at least 1 second to tur n the camera of f. 1 Press the REC/PLAY button . h The displa y changes to the Pla ybac k Screen and the image that was just captured is sho wn.
v English SHOO T , PLA Y B A CK AND SA VE Copy files to the computer (Windows XP) Connect your camera to a computer , and copy files to the computer . 1 Turn on the computer, and use the supplied dedicated USB interface cable to connect your c amera to the computer .
English vi 4 Se lect “CARD READER”, and press the SET button. h The message [Fou nd New Hardw are] appears in the task tra y , showing that the camer a is recognized as a drive . h The card is recognized (mounted) as a disk, and the [XA CTI_INT (E:)] icon appears in the [My Computer] windo w .
1 English CONTENTS CONTENTS ..... .................. ................... .................. .................. ............. 1 QUICK SEARCH BY OPERATION . ........... .......... ........... .......... ........ ..... 7 CHECKING THE INCLUDED ACCESSORIES .
English 2 SIMPLE SHOOTING BEFORE TAKING PICTURES ...................... .................. ..................... 53 For best r esults ..... .................. .................. ................... .................. 53 Using the au tofocus ......
3 English CONTENTS NORMAL SHOOTING RECORDING SIZ E ....................... .................. ..................... ................ 78 Movies ... ..................... ................... .................. .................. ........... 78 Still images .
English 4 PRINTING INSTRUCTIONS .. ........... .......... ........... .......... ........... ........120 Display the Printing Instruction s Screen .............. .................. ......120 Specifying date impr inting and pr int quantities ..........
5 English CONTENTS OTHER DEVICES AND CONNECTIONS CONNECTING TO A TV CONNECTING TO A TV .... ................... ..................... .................. ...... 155 PLAYING BACK ON A TV .................... .................. .................. ...
English 6 APPENDICES COMMONLY A SKED QUESTIONS ...................... .................. ...........180 TROUBLESHOO TING .............. .................. ................... .................. ...187 Camera .... .................. ...............
7 English QUICK SEARCH BY OPERA TION Y our camera has an abun dance of con venie nt f eatures and functions . F rom creating precisely the ph oto you want, to vie wing images using v arious techniques, y ou can locate the e xact oper ation f or your purposes in the follow ing t able.
English 8 Capture fast-moving subjects • “SCENE SE LECT” (spor ts mode) on page 84 Suppress camera shake eff ect • “Compensa te for camera shake during vid eo clip recording” on pa ge 90 .
9 English QUICK SEARCH BY OPERA TION Photographing landscapes • “SCENE SELECT” (landscape mode) on pa ge 84 T ake a self-pho to • “SELF-TIMER” on page 88 Make images li ghter or darker •.
English 10 Pl ayba ck Basic operation Con venient functions Additional functions Getting started view ing i mage s • “PLA YING BA CK VIDEO CLIPS AND STILL IMAGE S” on page 68 Adjust the speaker .
11 English QUICK SEARCH BY OPERA TION File managing/pr ocessing Basic operation Convenient functions Additional functions Search for image/audio files • “Multi-image displa y” on page 75 • “.
English 12 Using with a computer Basic operation Con venient functions Additional functions Use the camera as a car d reader • “USING AS A CA RD READER” o n page 160 Use your computer to or gani.
13 English CHECKING THE INCLUDED AC C E S S O R I E S i L i-ion battery pac k (pages 23 and 26): 1 i Lithium-ion batter y pack charger and power co r d (page 23): 1 i D edica ted USB interface cable (.
English 14 i Quick Guide i Obtain ing the PDF instruction manual and cautions.
15 English CHECKING THE IN CLUDED A CCESSORIES k How to attac h the lens cap.
English 16 <When used with a commerciall y av ailable handstrap>.
17 English CHECKING THE IN CLUDED A CCESSORIES Media car ds that can be used with this camer a The type of card that can be inserted into and used with this camera is: i SD Memor y Card i SDHC Memor y.
English 18 GETTING THE MOST OUT OF Y OUR CAMERA As well as photog raphing still images and recording video clips, y our digital movie camera can e v en capture still images while y ou’ re recording a video clip .
19 English GETTING THE MOST OUT OF Y OUR CAM ERA Movi e image stabil izer for sh arp pictures (page 90) Y our camera can compensa te f or the camera shak e that resu lts in blurry images when you try to capture a fast -moving subject or z oom in on a subject.
English 20 SYSTEM MAP Y ou can connect the camera to various de vices to e xpand its capabilities . Dedicated US B interf ace cable Dedicated A V interf ace cable Computer Print er TV DC adaptor (Opti.
21 English SETUP SETUP PA R T S N A M E S Front T o open Lens Flash Stereo microphone Strap holder ON/OFF button Monitor unit Speaker.
English 22 SETUP Rear [ ] button [ ] button REC/PLA Y button Monitor SET button T ripod stand hole Zoom swit ch [T]/[ ] ] [W]/[ P ] MENU button Card slot cover USB/A V terminal Bottom Multi-indicator.
23 English CHARGING Please charge the supplied bat tery pack befor e using it. 1 Insert the battery pack in the battery charger. h Inser t it in the direction indicated b y the [ o ] mar k on the battery pack. 2 Connect the supplied power cord to the socket on the battery pack charger.
English 24 SETUP INST ALL THE CARD The card can be used aft er it has been f ormatted with the ca mera (page 148). 1 Ope n the card slot cover. 2 I nsert the card. h Firmly inser t the card until it clicks into place . 1 Release from the bottom end. Card slot cov er 2 Pull gently , and rotate.
25 English INST ALL THE CARD 3 Close the card slot cover. <When removing the card...> h T o remove th e card, press it down , and then release. The card will protrude slightly , and you can then pull it out. CA UTION Do not attempt to for cibl y remove the car d i Nev er remov e the card when the m ulti-indicator is flashi ng red.
English 26 SETUP INST ALLING THE B A TTER Y P A CK Please charge the supplied ba tt ery pack bef ore using it. 1 Ope n the battery cover. 2 I nsert the battery pack. h T ake care that it is positioned correctly . Battery cover 2 Open 1 Push down and slide out.
27 English INST ALLING THE BA TTER Y P A CK 3 Replace the batter y cover. Installing the DC adapt or (sold separatel y : V AR-A2U/A 2EX) Push <T o remove the battery pack.
English 28 SETUP CA UTION Does the battery pac k appear sw ollen? i T he l ithium-ion battery used in thi s camera ma y expand slight ly when stored in a h ot en vironment or re peatedly used, but this is not a saf ety hazard.
29 English TURNING THE CAMERA ON AND OFF T urning on the camera 1 Open the monitor unit, and press the ON/OFF button for at least 1 second. h The camera t urns on. h If the date and time ha v e not been set, t he screen to set the date and time is shown on the monitor (page 32).
English 30 SETUP T urning on the camera when t he powe r save (sleep) mo de is active In order to pr eserve battery pack po wer , the power sav e (sleep) function will automatically tur n off the camera after 1 minute of no use during shooting, or 5 minutes of no use during playbac k (factory-preset setting).
31 English TURNING THE CAMERA ON AN D OFF HINT T o immediately activ ate the power save mode i Press the ON/OFF button briefly to activ ate the po wer sa ve function. About the standby mode i T o turn off the camera only briefly , you can close the monitor unit to put th e camera in the standb y mode.
English 32 SETUP D A TE AND TIME SETTING The camera will record the date and time an image or audio recording is taken so that y ou can disp la y them during pla yback. Theref ore, bef ore capturing images, mak e sure the correct date and time are set.
33 English D A TE AND TIME SETTING 2 Set the date. 1 Select “D A TE”. 2 Press the SET b utton. h The Set Date Screen appears. 3 Set the date to “2008/ 12/24”. h The date is set in the fol lowing order: Set the year → Set th e month → Se t the day .
English 34 SETUP 4 Se t the order in which the date is displayed during playback. 1 Select “DISP”. 2 Press the SET bu tton. h The Set Date Format S creen appears. 3 T oggle the SET button up or down. h T oggle the SET button up to change the displa yed da te order as f ollows: T oggle the SET button do wn to change it in the re ve rse order .
35 English SWITCHING BETWEEN THE SHOO TING MODE AND PLA YB A CK MODE Switch between th e shooting mode (f or recording) a nd the pla yback mod e (for viewing y our recorded images). 1 Turn on the camera (page 29). PLAY PLAY SAVE SAVE PLAY SAVE 668 668 01:17:32 01:17:32 668 01:17:32 2 Press the REC/PLAY button.
English 36 SETUP SWITCHING THE OPERA T ING MODE The “SIMPLE mode” comprises only those f unctions that are most often used and necessary to operate the camera, while the “NORMAL mode” ena bles full use of all the camer a’ s man y functions .
37 English SWITCHING THE O PERA TING MODE Accessing/e xiting the SIMPLE/NORMAL Mode Menu Screen 1 Set the camera to the shooting or playback mode (page 35). 2 Select the desired operating mode (page 36). 3 If the Menu Screen is not displayed, press the MENU button.
English 38 SETUP Using the SIMPLE Mode Menu 4 Toggle the SET button up or down to select the item you wish to change, and press the SET button. h The Setting Screen f or the selected ite m appears.
39 English SWITCHING THE O PERA TING MODE Using the NORMAL Mode Menu 4 Toggle the SET button up or down to select a tab. h The Menu Screen f or the selected tab appears.
English 40 SETUP 6 Toggle the SET button up or down to select the item you wish to change, and press the SET button. h The Setting Screen f or the selected ite m appears.
41 English SWITCHING THE O PERA TING MODE Overview of the SIMPLE Mode Set ting Screen SIMPLE Mode Shooting Menu S S N 1 5 2 3 4 OK Select movie and photo size.
English 42 SETUP 1 Recording si ze (page 56) h Select the video clip siz e to record, and the still image siz e to shoot. 2 Focus range (page 57) h Select the f ocus range that corresponds to the distance to the subject. 3 Flash (page 63) h Specify how the flash will operate .
43 English SWITCHING THE O PERA TING MODE SIMPLE Mode Pla ybac k Menu S S N 3 5 2 1 Start slideshow OK 4.
English 44 SETUP 1 Slideshow (page 71) h Specif y the slideshow settin gs and pla y the slidesho w . 2 Pl ayba ck vo lum e ( pag e 7 2) h Adjust the v olume f or video clip and audio file pla ybac k. 3 Delete (page 73) h Delete files. 4 (page 36) h Set to the NORMAL mode.
45 English SWITCHING THE O PERA TING MODE Overview of the NORMAL Mode Setting Screen NORMAL Mode Shooting Menu <T ab 1> 3 2 2 3 1 1 7 6 5 4 3 2 1 1 RECORDING MENU MOVIE PHOTO SCENE SELECT FIL TE.
English 46 SETUP 1 Video clip setti ngs (page 78) 2 Still imag e settings (pag e 79) 3 Scene se lect (page 84 ) 4 Filter (page 86) 5 Flash (page 87) 6 Self-timer (page 88) 7 Remaining battery power (page 153) ( : Record at 640 × 480 pixels , 60 frames per second.
47 English SWITCHING THE O PERA TING MODE <T ab 2> 2 2 3 1 1 3 7 6 5 4 3 2 1 2 RECORDING MENU MOVIE ST ABILIZER FOCUS PHOTO ST ABILIZER FOCUS MODE EXP MEASURE ISO OK EXIT.
English 48 SETUP 1 Movie st abilizer (page 90) h Compensate f or camera shak e during video clip recording . 2 Photo stabilizer (page 90) h Compensate f or camera shak e during still image shooting. 3 Focus range (page 93) h Select the f ocus range that corresponds to the distance to the subject.
49 English SWITCHING THE O PERA TING MODE <T ab 3> 3 2 2 3 1 1 6 5 4 3 2 1 3 OK EXIT RECORDING MENU DIGIT AL ZOOM REC FOLDER F ACE CHASER WHITE BALANCE HIGH SENSITIVITY.
English 50 SETUP 1 White balance (page 99) 2 Face c haser (page 100) 3 High sensitivity mode (page 101) 4 Digital zoom (page 102) 5 Recording f older (page 103) h Create or select a folde r in which to store recorde d files.
51 English SWITCHING THE O PERA TING MODE NORMAL Mode Playbac k Menu <T ab 1> 1 Slideshow (pag e 105) h Specify the slideshow setti ngs and play the slideshow . 2 Playb ack v olume (page 72) h Adjust the v olume f or video clip and audi o files pla yback.
English 52 SETUP <T ab 2> 1 Edit photo (page 110) h Repair the “red-e y e” caused by the flash, or enha nce the contrast. 2 Video clip edit (pag e 112) h Edit video clips. 3 Printin g instructio ns (page 120) h Specif y the prin ting instructions (DPOF sett ings).
53 English SIMPLE SHOO TING SIMPLE/SHOO TING BEFORE T AKING PICTURES For best r esults Hold the camera securely , keeping your elbows c lose to your body and making sure the came ra is stable. Make sure that the le ns and flash ar e not b lock ed b y y our fingers or the handstrap .
English 54 SIMPLE/SHOO TING Using the autof ocus The autofocu s will work in almost all si tuations; howeve r , there a re certain conditions that may cause the autofocus function to not work properly . If the autofocus function is not w orking properl y , set the focus range to capture images (page 57).
55 English BEFORE T AKING PICTURES The foll owing e xamples are so me of the situations where th e autof ocus function ma y work, but not as desired. i When both near and far objects are present Use t.
English 56 SIMPLE/SHOO TING Select the recor ding size The larger the image size (n umber of pix els), the better the image qua lity will be, b ut the file siz e will also be larger . Select the image quality that is correct fo r the inten ded purpose.
57 English BEFORE T AKING PICTURES Select the focus setting Select the f ocus range corresponding to the distance bet ween the camer a and the subject. 1 Display the SIMPLE Mode Shooting Menu (page 37), select the focus setting, and press the SET button.
English 58 SIMPLE/SHOO TING Switching the displa y mode In the shooting mode , you ca n select the either the “sett ings displa y mode” which allows y ou to confi rm the shooting settings on the monitor while you shoot, or the “normal display mode” in which the setting indicati ons are turned off, providing a full vie w of the subject.
59 English BEFORE T AKING PICTURES Hints f or taking pictures Muting the operation sounds i The audio guidance that sounds when you oper ate the camer a can be muted ( page 132). Where are the ima ge and audio file s saved? i All the image and sound f iles are recorded on the card installed in the camera or in t he camera’ s inter nal memor y .
English 60 SIMPLE/SHOO TING VIDEO CLIP RECORDING 1 Turn on the camera (page 29), and set it to the shooting mode (page 35). 2 Pres s the [ ] button. h Recording begins .
61 English SHOO TING SINGLE SHO TS Capture a still image (single-shot). 1 Turn on the camera (page 29), and set it to the shooting mode (page 35). 2 Press the [ ] button. 1 Press the [ ] b utton halfway . h The autof ocus oper ates, and the image is f ocused (focus lock).
English 62 SIMPLE/SHOO TING HINT Adjusting the monitor brightness i While the Shooting Screen is active , you can quic kly access the screen f or adjusting the brightness of the monitor (page 140) b y pressing the MENU button f or at least 1 second.
63 English SHOO TING SINGLE SHO TS Using the flash The flash is not only used f or photogr aphing under dark condi tions, b ut is also conv enient f or e xample when the subject is in shado w or lit from behind. The flash is av ailab le only when shooting single-shot still images.
English 64 SIMPLE/SHOO TING CA UTION Do not touch the flash unit when shooting i T he fl ash unit becomes v ery hot and ma y cause a burn. A void to uching the flash unit when shooting. HINT i T he flash w orks only when shooting sin gle-shot still images .
65 English SHOO T A STILL IMA GE WHILE RECORDING A VIDEO CLIP Y ou can capture a still image (a single-shot) while recording a video clip . 1 Turn on the camera (page 29), and set it to the shooting mode (page 35). 2 Press the [ ] button. 3 When you see a scene you’d like to capture as a still image.
English 66 SIMPLE/SHOO TING HINT i When shooting a still image while recordi ng a video clip , the flash does not operate. i T he f ace chaser feature (page 100) is inoperativ e. i When the remaining video recording time becomes appro ximately 50 seconds, it will no lo nger be possib le to capture a still image whi le recording a video clip .
67 English MA CRO-PHO T OGRAPHY (ZOOM) Y our camera has t wo zo om functions: opti cal zoom and digital z oom. 1 Point the came ra lens at the subject. 2 Push the zoom switc h toward [T/ ] ] or [W/ P ] to compose the desired image. [T/ ] ]: Zoom in on the subject.
English 68 SIMPLE/PLA YBA CK PLA YBACK SIMPLE/PLA YBACK PLA YING BA CK VIDEO CLIPS AND STILL IMA GES 1 Se t the camera to the playback mode (page 35). 2 Toggle the SET button to the left or right to display the image you wish to play back. h Video clips are indicated b y a video clip pattern along the left and right sides of the screen.
69 English PLA YING B A CK VIDEO CLIPS AND STILL IMA GES When y ou are finishe d using the camera.. . i Press the ON/OFF button to turn the camera off. T o do th is... Do this Normal forw ard pla yback Press the SET button. Stop pla yback During playba ck, toggle the SET butt on down.
English 70 SIMPLE/PLA YBA CK How to save one fram e fr om a vide o c lip as a still imag e 1 Pl ay back the video clip. P ause the playback at the point you wish to “snap” a photo. 2 Pr ess the [ ] button. h The currently disp lay ed frame is sav ed as a stil l image.
71 English SLIDESHO W PLA YB A CK Y ou can play bac k files in succession with the “slideshow pla ybac k” f eature. 1 Display the SI MPLE Mode Playback Menu (page 37), select the slideshow setting, and press the SET button. 2 Select the type of file to pl ay back, and press the SET button.
English 72 SIMPLE/PLA YBA CK PLA YBA C K V OLUME Adjust the pla yback v olume f or video clips and audio files . 1 Display t he SIMPLE Mode Playback Menu (page 37), select the playback volume setting, and press the SET button. h The v olume control bar appe ars.
73 English DELETING FILES Y ou can delete files if you no lon ger need them. Y ou can delet e the files one at a time , or all at once. 1 Display the SI MPLE Mode Playback Menu (page 37), select the delete c icon, and press the SET button. DELETE SINGLE: Deletes the currently displa yed file.
English 74 SIMPLE/PLA YBA CK 3 Se lect “DELETE”, and press the SET button. <DELETE SINGLE> h The currently disp la yed fil e is delete d. h T o delete other files, select th e files, select “DELETE” and press the SET button. <DELETE ALL> h The Delete Confirmation Screen again appears .
75 English PLA YB A CK MODES Multi-image displa y 1 Display the i mage you wish to play back. 2 Push the zoom switc h toward the [W/ P ] side. h The 9-image displa y appears. 3 Select the ima ge to play back. h T oggl e the SET button up, down, left or r ight to move the orange fr ame to th e desired image, and press t he SET but to n.
English 76 SIMPLE/PLA YBA CK Selecting the playback f ol der If the card cont ains multiple f olders, you can select fro m which f older y ou would lik e to pla y back. 1 Di splay the Play back Screen. 2 Push the zoom switch toward the [W/ P ] side 3 times.
77 English PLA YB A CK MODES Magnifying ( zooming in) the image 1 Display the image that you want to magni fy. h F or a video cli p , pause pla yback at the pl ace you want to magnify . 2 Push the zoom switch toward the [T/ ] ] side. h Magnification is enable d.
English 78 NORMAL/SHOO TING NORMAL SHOO TING NORMAL/SHOOTING RECORDING SIZE The image quality of video clips and still images is determined by the recording siz e (number of pix els). The larger the recording size , the better th e image quality will be, but the file siz e will also be larger .
79 English RECORDING SIZE Still images This menu is also used f or shooting sequential shots. 1 Display the NORMAL Mode Shooting Menu (page 37), select “PHOTO”, and press the SET button. 2 Select the desired recording size, and press the SET button.
English 80 NORMAL/SHOO TING Sequential s hots 1 Di splay the NORMAL Mode Shooting Menu (page 37), select “PHOTO”, and press the SET button. 2 Se lect R or t , and press the SET button. 3 Pr ess the [] button. h Shooting begins . Shooting continu es as long as the [ ] button is kept pressed.
81 English RECORDING SIZE A udio recor ding Y our camera can mak e audio recordings and p lay them bac k. A udio recor ding 1 Display the NORMAL Mode Shooting Menu (page 37), select “MOVIE”, and press the SET button. 2 Select < , and press the SET button.
English 82 NORMAL/SHOO TING 4 En d the recordi ng. h Press the [ ] butt on again to stop recording. HINT Y ou can capture a still image during an audio recording i Press the [ ] button during audio recording t o capture a stil l image.
83 English RECORDING SIZE 2 Play back the recor ding. CA UTION If no audio is heard... i The audio is not pla ye d back when the audio recording is pla yed back in the f ast pla ybac k or f ast rev erse mod e. T o do this ... Do this Normal play back Start play back Press the SET button .
English 84 NORMAL/SHOO TING SCENE SELECT Y ou can select f rom various preset settings (aperture, shutter speed, etc.) f or specific shooting conditio ns. 1 Di splay the NORMAL Mode Shooting Menu (page 37), select “SCENE SELECT”, and press the SET button.
85 English SCENE SELECT 2 Select the desired icon, and pres s the SET button. h This completes the scene select function setting. h T o return to nor mal photogr aph y , select = from the scene select menu, and p ress the SET b utton.
English 86 NORMAL/SHOO TING FIL TERS The filter f eature changes image char acteri stics such as color tones, to apply unique eff ects to th e photogr aphed image . 1 Di splay the NORMAL Mode Shooting Menu (page 37), select “FIL TER”, and press the SET button.
87 English FLASH OPERA T ION The flash is used not only f or taking pict ures where there is insuffici ent light, but also when the subje ct is in shade or in backligh t conditions. The flash can be enabled on ly when capturing single still images. 1 Display the NORMAL Mode Shooting Menu (page 37), select “FLASH”, and press the SET button.
English 88 NORMAL/SHOO TING SELF-TIMER Set the dela y time bef ore recording starts after the [ ] or [ ] button is pressed. 1 Displa y the NORMAL Mode Shooting Menu (page 37), select “SELF- TIMER”, and press the SET button. 2 Se lect the desired icon, and press the SET button.
89 English SELF-TIMER HINT i By assigning an operation shortcut to the SET button (page 135) , you can set the self-timer from the Shoot ing Screen. T o pause or cancel the self-timer function... i If the [ ] button or [ ] but ton is presse d again bef ore the shutter is released, the se lf-timer countdo wn temporarily stops .
English 90 NORMAL/SHOO TING MO TION COMPENSA TION (IMA GE ST ABILIZER) Y our camera can minimiz e a jittery picture b y compensating for unintentional hand motion. Compensate for camera shake during video clip recor ding 1 Di splay the NORMAL Mode Shooting Menu (page 37), select “MOVIE STABILIZER”, and press the SET button.
91 English MO TION COMPENSA TI ON (IMA GE ST ABILIZER) HINT If the motion compensation does not seem to be w orking... i Due to the mechanical char acteristics of this function, it ma y not be possible f or the camera to compensate for violent motion.
English 92 NORMAL/SHOO TING <Concerning the changing field of view when motion compensation is enabled > i When the motion compensation is set to ON, the field of vie w during recording standb y diff ers from the recordable field of vie w as shown below .
93 English FOCUS RANGE 1 Display the NORMAL Mode Shooting Menu (page 37), select “FOCUS”, and press the SET button. h When shooting a subject at a medium to far dista nce, b y setting the focus range to * , you will f ind it both easier and f aster to focus.
English 94 NORMAL/SHOO TING How to use th e manual f ocus 1 Di splay the NORMAL Mode Shooting Menu (page 37), select “FOCUS”, and press the SET button. 2 Se lect - , and press the SET button. h The fo cus distance adjustmen t bar appears . 3 Toggle the SET button to the left or right to adjust the focus distance, and press the SET button.
95 English FOCUS MODE Y ou can choose from the f ollowing 2 ty pes of autof o cus (still imag e shooting only): 9-point range finder focus: The correct f ocus is determined from 9 different focus point s within the shooting area visible on the monitor .
English 96 NORMAL/SHOO TING LIGHT -MEASURING MODE SETTING Y ou can select from 3 types of light-measuring modes . Multi-section light-me asuring: The light is modulated after sampli ng from multi ple areas of the entire shooting screen.
97 English ISO SENSITIVITY With the initial sett ings, the ISO sensit ivity is automati cally set according to the brightness of the subject. How ev er, the ISO sensitivity can be set to a fixed setting. 1 Display the NORMAL Mode Shooting Menu (page 37), select “ISO”, and press the SET button.
English 98 NORMAL/SHOO TING HINT i By setting a highe r ISO sensitivity , you can set f aster shutt er speeds and capture images in dark er locations , but noise in the captured images ma y increase or the images ma y be irregular .
99 English WHITE B ALANCE This camera automaticall y adjusts the white balance und er most lighting conditions. Ho we v er , if y ou want to specify the lighting conditions or ch ange the ov erall tone of the image, the whit e balance can be manuall y set.
English 100 NORMAL/SHOO TING F A CE CHASER As you capt ure a still image , the f ace chaser de tects the subject’ s face , and adjusts the brightness and f ocus in a wa y that produces a clear and bright photo of the subject’ s face . 1 Display the NORMAL Mode Shooting Menu (page 37), select “FACE CHASER”, and press the SET button.
101 Engl ish HIGH SENSITIVITY MODE When yo u shoot in t he high sensitivit y mode, t he captured imag e appears ev en brighter than that specified b y the ISO sensitivity and e xposure compensation se ttings. 1 Display the NORMAL Mode Shooting Menu (page 37), select “HIGH SENSITIVITY”, and press the SET button.
English 102 NORMAL/SHOO TING DIGIT AL ZOOM SETTING This setting allo ws you to specify whet her or not the digital z oom is enabled during zoom shoo ting. 1 Di splay the NORMAL Mode Shooting Menu (page 37), select “DIGITAL ZOOM”, and press the SET button.
103 Engl ish SPECIFY A FOLDER T O SA VE FILES Create or select a recording folder (a f older in which to store recorded files). 1 Display the NORMAL Mode Shooting Menu (page 37), select “REC FOLDER” and press the SET button. <Create a new f older> h Select “NEW”.
English 104 NORMAL/SHOO TING EXPOSURE COMPENSA TION By assigning the exposure compensation operation shortcut to the SET button (page 135), you can mak e the image lighter or dar k er when capturing images. 1 Assign t he operation shortcut to the SET button (page 135).
105 Engl ish PLA YBACK NORMAL/PLA YBACK SLIDESHO W PLA YB A CK Specify the settings f or pla ying bac k files continuously in a “ slideshow” f ormat.
English 106 NORMAL/PLA YBA CK 2 Se lect “START” and press the SET button. h Slideshow pla ybac k begins. h T o stop slideshow playb ack, press the SET b utton or MENU but ton. HINT BGM for video c lips? i When video clips are play ed back in a slide show , the recorded audio tr ack is played back; the B GM is not p la yed.
107 Engl ish FILE PR O TECT Prev ent accidental erasure of image and audio fi les. 1 Display the fil e that you want to protect from accidental erasure, and display the NORMAL Mode Playback Menu (page 37). 2 Select “PROTECT” and press the SET button.
English 108 NORMAL/PLA YBA CK R O T A TE STILL IMA GE Captured still ima ges can be rota ted to the correct orientation f or vie wing. 1 Di splay the still imag e you wish to rotate, and display the NORMAL Mode Playback Menu (page 37). 2 Select “ROTATE”, and press the SET button.
109 Engl ish REDUCE STILL IMA GE SIZE (RESIZE) A captured image can be resized to a smaller size and sav ed as a separa te image. 1 Display the sti ll image whose size you want to change, and display the NORMAL Mode Playback Menu (page 37). 2 Select “RESIZE”, and press the SET button.
English 110 NORMAL/PLA YBA CK CORRECTING THE RED-EYE EFFECT AND IMA GE BLUR Repair the red-e y e eff ect in still images to mak e the e yes appea r more natural, and enh ance the contrast of b lurry images. 1 Display the imag e to be modifie d, and display t he NORMAL Mo de Playback Menu (page 37).
111 Engl ish CORRECTING THE RED-EYE EFFECT AND IMA G E BLUR 5 Press the SET button. h A screen appears f or you to specify whether or not to sa v e the original image. SA VE AS NEW: The corrected image is sav ed as a separate image , and the original image is preserved.
English 112 NORMAL/PLA YBA CK EDITING VIDEO CLIPS Y ou can trim awa y unw anted portions from a video clip and sav e it as a new video clip (video clip cutting [ext racting]). Y ou can also join video clips together and sa ve th em as one separate clip (“joining”).
113 Engl ish EDITING VIDEO CLIPS Procedure to join video clips CA UTION Caution when editing video clips i When editing video clips , do not pr ess the REC/PLA Y button. If y ou press the REC/PLA Y button while editing video clips, not only will the editing not be properly completed, b ut the original video clip may also be er ased.
English 114 NORMAL/PLA YBA CK Video c lip cutting (ex tracting) 1 Display t he video clip from which you wish to extract a segment. 2 Displa y the NORMAL Mode Playback Menu (page 37), select “EDIT VIDEO”, and press the SET button. 3 Select “CUT” an d press the S ET button.
115 Engl ish EDITING VIDEO CLIPS 4 Specify the sta rt point of the extract. h Use the procedure belo w to specify the frame from which the video clip extra ct will star t.
English 116 NORMAL/PLA YBA CK 6 Pr ess the [ R ] button. h A screen appears f or you to select either to sa v e the edited video cl ip as a new (separ ate) file, or to delete the original video clip and replace it with the edited video clip . SA VE AS NEW: The edited video clip will be sav ed as a ne w file.
117 Engl ish EDITING VIDEO CLIPS Joining vi deo c lips CA UTION i Video clips that were photogr aphed in diff erent modes cannot be joined. 1 Display the NORMAL Mode Playback Menu (page 37), select “EDIT VIDEO”, and press the SET button. 2 Select “JOIN” and press the SET button.
English 118 NORMAL/PLA YBA CK 3 Move the ora nge frame to the video clip you wish to join, and press the SET button. h The specified video clip is labeled with a number . h Up to 9 video clips can be selected. h T o cancel a selection and remov e the number label fro m a video clip , select the video clip and press the SET butt on.
119 Engl ish EDITING VIDEO CLIPS 5 Select the desired option, and press the SET button. h Editing st arts. h When editing ends , y ou are returned to the NORMAL Mode Pla ybac k Menu. HINT i If the original video clip is protected, e v en if you select “O VERWRITE” in step 5 and press the SET butt on, the original video clip will not be erased.
English 120 NORMAL/PLA YBA CK PRINTING INSTR UCTIONS In addition t o using y our printer to print out still images captu red with y our camera, as with co nv entional film, you can ha v e prints made at shops off ering digital pr int ser vices.
121 Engl ish PRINTING INSTRUCTIONS HINT Printing a single frame from a video clip i T o print with a printer or have the digital print service shop print out a still image from a video clip , y ou must first sa ve it (extr act still) as a still image (page 70).
English 122 NORMAL/PLA YBA CK Specifying date imprin ting and print quantit ies Y ou can specify printing instruct ions for eac h individual image (EA CH IMA GE), or apply the printing instructions to all the images (ALL IMA GES). 1 Di splay the Printing Instructions Scr een (page 120).
123 Engl ish PRINTING INSTRUCTIONS 4 Specify whe ther the date is displayed on the print, and the number of prints. <Specify the number of prints> h T oggle the SET b utton up or down. h The quantity indicati on changes. h Displa y the desired numb er of prints.
English 124 NORMAL/PLA YBA CK Index pr int Printing out m any small images on one s heet is called an “index print”. This is con venient f or use as a list of the images y ou have captured. 1 Di splay the Printing Instructions Scr een (page 120). 2 Se lect “INDEX”.
125 Engl ish PRINTING INSTRUCTIONS Clearing all the printing instructions Delete the printing instructions f or all images. 1 Display the Pri nting Instructions Screen (page 120). 2 Select “ALL CLEAR”. 3 Press the SET button. h The Confirm All Clear Screen appears.
English 126 NORMAL/PLA YBA CK COPY FILES Images and audio files recorde d in the camera’ s internal memor y can be copied to the card, and lik ewise fro m the card to the internal memory . 1 I nsert the card in the camera (page 24). 2 Di splay the NORMAL Mode Play back Menu (page 37).
127 Engl ish COPY FILES 5 Press the SET button. h The screen to select the type of copy appears. h The cop y source image is shown in the backg round on t he screen. COPY SINGLE: Copy one file . COPY ALL: Copy al l the files from the cop y source to the cop y destination.
English 128 NORMAL/PLA YBA CK DISPLA YING FILE PROPER TIES (INFORMA TION SCREEN) On the Inf or mation Screen y ou can check what th e settings were when a file was recorded with your camera. 1 Display the desired file on the camera monitor. 2 Pr ess the MENU button for at least 1 second.
129 Engl ish OPTION SETTINGS OPTION SETTINGS DISPLA Y THE OPTION SETTING MENU The camera settings are e x ecuted via the Option Sett ing Menu. 1 Set the operating mode to the NORMAL mode (page 36). 2 Press the MENU button to display the Menu Screen. 3 Select an Option tab (1, 2 or 3), and press the SET button.
OPTION SETTINGS English 130 SCREEN DISPLA Y Specify what inf ormation is displa y ed on the Pla ybac k Screen. 1 Display t he Option Setting Menu [ E 1] (page 129). 2 Se lect “INFO DISPLAY”, and press the SET button. SHO W ALL: Display the capture da te and play back ti me (f or video clips).
131 Engl ish SELECT THE ST ARTUP DISPLA Y The startup display is the displa y that appears on the monitor when the camera is t urned on in the recording mo de. 1 Display the Option Setting Menu [ E 1] (page 129) . 2 Select “STARTUP DISPLAY”, and press the SET button.
OPTION SETTINGS English 132 OPERA T ION SOUNDS Use this menu to set the confirming audio signa ls when the camer a is turned on/off or when th e operation b uttons ([ ] butt on, SET butt on, MENU butto n, etc.) are pressed, to adjust th e operation so und volume , and to enable/ disable the audio gui de.
133 Engl ish OPERA TION SOUNDS 3 Toggle the SET button up or down to select the des ired setting, and press the SET button. h The screen to select oper ation sounds appears . <If “TURN ON/OFF” or “A UDIO GUIDE” is s elected> h The respectiv e screen to enab le or disab le the sound appears.
OPTION SETTINGS English 134 POST -VIEW D ISPLA Y SETTING Specify the dur ation that the capt ured image appears on the monito r (post- view) after the [ ] button is pressed. 1 Display t he Option Setting Menu [ E 1] (page 129). 2 Se lect “POST VIEW”, and pr ess the SET button.
135 Engl ish ASSIGN SET BUTT ON FUNCTIONS Assign functions (operation shortcuts) to the SET bu tton when it is toggl ed up , down, left or right when the Shooting Screen is displa y ed. 1 Display the Option Setti ng Menu [2] (page 129). 2 Select “SHORTCUTS”, and press the SET button.
OPTION SETTINGS English 136 4 Toggle the SET button up or down. h Display the function you wish to assign to the k ey . 5 Pres s the SET button. h The selected function is assigne d to the ke y , and you are returned to the Shortcuts Screen. h T o assign functions to the other ke ys, repea t steps 3 through 5 .
137 Engl ish NOISE-REDUCTION FUNCTION Image noise when recording video clips or still images, as well as audio noise such as from the wind, can be minimized with t he noise-reduction funct ion. 1 Display the Option Setti ng Menu [2] (page 129). 2 Select “NOISE REDUCTION”, and press the SET button.
OPTION SETTINGS English 138 ADJUST THE IMA GE QU ALITY The camera can adjust the image quali ty as the image is captured. 1 Di splay the Option Sett ing Menu [2] (page 129). 2 Se lect “IMAGE SE TTINGS”, an d press the SET button. NORMAL: Shoot with image q uality at normal.
139 Engl ish FLICKER-REDUCTION The flick er-reduction setting reduces the fli ck er that results when f ilming video clips under fluorescent lights and the like where the bac kground lig hting pulsates at the frequency of th e power supply . 1 Display the Option Setti ng Menu [2] (page 129).
OPTION SETTINGS English 140 MONIT OR BRIGHTNESS Adjust the brightness of the camera’ s monitor display . Use this adjustment when the monitor image is difficult to view because of ambie nt lighting. 1 Di splay the Option Sett ing Menu [2] (page 129).
141 Engl ish SCREEN LANGU A GE Y ou can set the monitor o f your camera to displa y the messages in any one of sev eral lang uages. 1 Display the Option Setti ng Menu [2] (page 129).
OPTION SETTINGS English 142 TV SYSTEM SETTING Specify the type of image signal tha t is output from your camera’ s USB/A V terminal. 1 Di splay the Option Sett ing Menu [3] (page 129). 2 Se lect “TV SYSTEM”, and press the SET button. h The TV System Scr een appears .
143 Engl ish PO WER SA VE FUNCTION Y our camera has a “pow er sav e” function whereby the power automatically tur ns off after a specifi ed period of inactivity .
OPTION SETTINGS English 144 3 Se lect the desired option, and press th e SET button. h The Set Standb y Time Screen appears . 4 Toggle the SET button up or down to set the standby time. Up: Increases the standb y time . Down: Decreases the stan dby time .
145 Engl ish FILE NO . MEMOR Y If a newly f or matted card is used, the file name (image number) of the captured image automatically begins from 000 1. If the card is subsequently ref ormatted, or if a diff erent ref ormatted card is used, the file names again begin from 0001.
OPTION SETTINGS English 146 i If Card B already has files in it when it replaces Card A, file names are assigned as f ollows . When the highest file number on Card B (bef ore replacing) is lo wer than the highest file number on Car d A: the file name of the ne xt recorded image contin ues from last file name recorded on Card A.
147 Engl ish FILE NO . MEMOR Y 1 Display the Option Setti ng Menu [3] (page 129). 2 Select “FILE NO. CONT’D”, and press the SET button. ON: The file number memory function is on. OFF: The file number memory function is off . 3 Select the desired setting, and press the SET button.
OPTION SETTINGS English 148 FORMA T TING A CARD A card must be f ormatted with this camera: i After purchasing, when used for the first t ime, or i If it was f ormatted using a p ersonal computer o r another digita l camera. The card cannot be fo rmatted if the loc k s witch is set to the “LOCK” position.
149 Engl ish FORMA TTING A CARD 4 Select “YES”, and press the SET button. h F ormatting begins. h During formatting , “Fo rmatting” and “do not power off” are shown on the monitor . CA UTION Caution during formatting i Do not turn off the power to the came ra or eject the card d uring formatting.
OPTION SETTINGS English 150 RESETTING THE CAMERA SETTINGS Reset the camera to the f actor y-preset se ttings. 1 Di splay the Option Sett ing Menu [3] (page 129). 2 Se lect “RESET SETTINGS”, and press the SET button. RESET : Reset to the f actory-preset settings.
151 Engl ish CHECKING THE REMAINING CARD MEMOR Y Y ou can check ho w many images can be captured and how much reco rding time is av ailab le on the card. F or a tab le showing the maxim um number of images and recording time f or specific cards , please see “P ossible No .
OPTION SETTINGS English 152 HINT i When the remaining number of images or the remaining video record ing time is “0”, y ou cannot cap ture an y more images . T o capture more images , either install a ne w card, or sa v e the images to a computer and then del ete them (page 73) from the ca rd.
153 Engl ish CHECKING THE REMAINING B A TTER Y P A CK CHARGE When using the battery pack, t he remaining battery pack charge can be check ed on the monitor . Make sure to check this indicat or bef ore capturing an image. F or an indication of the po ssible leng th of time fo r battery pack operation, see page 20 3.
OPTION SETTINGS English 154 HINT i If any file is present, y ou can a lso check the remaining battery pack cha rge on the Inf ormation Screen (page 128). i Batter y lif e ma y diff er e ven among battery packs of the same type . i D epend ing on the usage of the camera (such as the numb er of times the flash is used, the use of the mon ito r , etc.
155 Engl ish OTHER DEVICES AND CONNECTIONS CONNECTING TO A TV CONNECTING TO A TV CONNECTING T O A TV NO TE Insert and pull out the cable carefully i When connecting the cabl es, mak e sure that the ca ble pl ugs are correctly oriented and that the y match the shapes of the terminal sock ets on the devices .
CONNECTING TO A TV English 156 PLA YING BA CK ON A TV i A fter connecting the camera to the tele vision, switch the TV in put to the terminal to which the camera is connected. i When the camera is connected to a TV , no image appears on t he camera’ s monitor .
157 Engl ish CONNECTING TO A COMPUTER CONNECTING TO A COMPUTER OPERA T ING ENVIR ONMENT When using as a car d reade r Limited to models with the preinstalled OS k Windows Windows 20 00, XP , Vista k Mac OS Mac OS X 1 0.
CONNECTING T O A COMPUTER English 158 SETTING THE CONNECTION MODE Use the dedicated USB interf ace cable to connect the camera to a comput er . 1 St art your computer, and use the supplied USB interface cabl e to connect your camera to the computer. h Connect the camera’ s USB/A V terminal to the computer’s USB connector .
159 Engl ish SETTING THE CONNECTION MODE 3 Select “COMPUTER”, and press the SET button. h The screen to sele ct the computer connection mode appe ars. CARD READER: Use the camera as an ext ernal drive of the computer . MTP: Connect the camera in th e MTP mode to a Windows Vista computer .
CONNECTING T O A COMPUTER English 160 USING AS A CARD READER For Windows Vis ta/XP users Mounting y our camera 1 Se t the camera to the card reader mode (page 158). h The message [Fou nd New Hardw are] appears in the task tra y , showing that the camer a is recognized as a drive .
161 Engl ish USING AS A CARD READER For Windows 2000 use rs Mounting y our camera 1 Set the camera to the card reader mode ( page 158). h If a messag e appears on the computer monitor instructing y ou to load the Windows CD-R OM, f ollow the instructions and install the driv er .
CONNECTING T O A COMPUTER English 162 For Mac OS X users Mounting y our camera 1 Se t the camera to the card reader mode (page 158). h The camera is recogniz ed as a drive and appears as an icon named [XACTI] on the Deskto p .
163 Engl ish ABOUT THE CONT ENTS OF THE CARD Configuration of directories in the card * Up to 9,999 files can be stored in f older 100SANY O. If more files are made , a folder named 101SANY O is created, and the y will be store d in there. Ne w folde rs will then be named in sequence , i.
CONNECTING T O A COMPUTER English 164 Cautions when usin g as a car d reader i D o not alter files or f olders in your camera in any w ay . Doing so may result in your camer a not recognizing that dat a. If you want t o edit files , first cop y them to your computer’ s hard driv e.
165 Engl ish USING AS A PC CAMERA When connected to a Windo ws XP or Windows Vi sta computer , the camera can be used as a PC camera. For Windows XP Please perf orm the follo wing upgrades bef ore connecting the camera to a computer . i Upgrade Windows XP to SP2.
CONNECTING T O A COMPUTER English 166 USING THE SOFTW ARE Use the links on the Sany o website f or do wnloading software that enables you to use th e data from you r camera on a computer . Bef ore downloading t he software , be sure to check the precautions described on the webs ite.
167 Engl ish USING THE SOFTW ARE Obtaining the so ftware For Windows operating s ystems 1 Remove the card from the camera. h The progr am to access the websi te is stored in your camer a’ s internal memory . This program cannot be acce ssed while a card is installed in the camera.
CONNECTING T O A COMPUTER English 168 4 Se lect “COMPUTER”, and press the SET button. h The screen to select t he computer connect ion mode appears . 5 Se lect “CARD READER” and press t he SET button. <For Windows users> h The screen to access the website f or this camera (access menu) appears.
169 Engl ish USING THE SOFTW ARE HINT If the Autorun, A utorun.exe or index.html file has been deleted... i The Autorun or A utorun.exe and inde x.html files can be created b y using the camera to f ormat the camera ’ s internal memory .
CONNECTING T O A COMPUTER English 170 SA VE AN IMA GE OF Y OUR COMPUTER SCREEN The screen capture sof tware (Scree n Capture 1. 1 [hereafter refer red to as “Screen Capture”]) is used to sa ve a n image of the computer’ s screen display on the card installed in y our camera.
171 Engl ish SA VE AN IMA GE OF Y OUR COMPUTER SCREEN How to use Screen Ca pture 1 Set the camera to the screen cap ture mode (pag e 158). 2 Run Screen Capture. h Screen Capture is automatically launche d when you start your computer . <T o quit Screen Capture> h Right-clic k on [SANY O Screen Capture 1.
English 172 CONNECTING T O A PRINTER CONNECTING TO A PRINTER CONNECTING TO A PRINTER PictBridge MODE Y our camera supports the PictBridge function. By connect ing the camera directly to a PictBridge-enab led printer , the camera’ s monitor can be used to select images and initiate printing (P ictBridge printing).
173 Engl ish PictBrid ge MODE 3 Select “PRINTER”, and press the SET button. 4 The PictBridge printing mode is activated. h The camera switches to the PictBridge printing mode , and the PictBridge Men u appears .
English 174 CONNECTING T O A PRINTER PRINTING Printing selec ted images Procedure to select one still image and print it. 1 Compl ete the printing setup (page 172). 2 Se lect the one image icon Y , and press the SET button. h The screen to select images f or printing appears .
175 Engl ish PRINTING Printing all images Print all of the images on the card. 1 Complete the prin t preparations (page 172). 2 Select the all imag es icon u , and press the SET button. h The Print All Images Screen appears. 3 Select “PRINT”, and press the SET button.
English 176 CONNECTING T O A PRINTER Making an inde x prin t Make an inde x print of all the image s on the card. 1 Compl ete the print preparations (page 172). 2 Se lect the index print icon [ , an d press the SET button. h The Inde x Print Screen appea rs.
177 Engl ish PRINTING Printing images accor ding to printing instructions (requested images) Procedure to print al l the ordered ima ges. 1 Complete the prin t preparations (page 120), and complete the print prepar ations (pa ge 172). 2 Select the DPOF icon w , and press the SET button.
English 178 CONNECTING T O A PRINTER Changing the printer sett ings Images are p rinted according to setti ngs specified b y the camer a, such as paper type, siz e, la yout, printing quality , etc. 1 Compl ete the print preparations (page 172). 2 Se lect the printer setti ngs icon v , and press the SET button.
179 Engl ish PRINTING 3 Adjust the printer settings. 1 T oggle the SET button up or down to select a printer setting parameter , and press the SET button. h The screen to set the selected parameter appears . 2 T oggle the SET button up or down to adjust the setti ng, and press the SET button.
English 180 APPENDICES APPENDICES APPENDICES COMMONL Y ASKED QUESTIONS If you h av e a question a bout the camera o peration, y ou might fin d the ans wer in this compilation of co mmonly asked quest ions. Question Answer Action Pow e r Why d oesn’t the powe r turn on? Due to cold temperatures , the battery pack temporarily lost its powe r .
181 Engl ish COMMONL Y ASKED QUESTIONS Shooting Are the settings retained e ven after the camer a is turned off? — All settings except the self-time r and the e xposure compensation a re retained e ven after the camera is turned off .
APPENDICES English 182 Shooting What is the diff erence between th e digital zoo m and the optical zoom? — Because shooting with the optical zoom uses the optics of a ph ysical lens, y ou can sh oot without losing minute detail s in the image.
183 Engl ish COMMONL Y ASKED QUESTIONS Monitor When used i n cold weather , why does the image seem to leav e traces as it mov es? Condition due to the monitor characteristics. Not a malfunction. Spots that appear in the monitor only appear in the monitor and will n ot be recorded with the images.
APPENDICES English 184 Viewing images Why is there no image ( z is shown)? This may happen when trying to play back images stored on a card from a diff erent digital camer a.
185 Engl ish COMMONL Y ASKED QUESTIONS Printing Why do es a message appear during PictBridge printing? There is a problem with the printer . Please refer to the instruction manual for your print er . Misc. The “Cannot edit video clips with unlike se ttings” message appears.
APPENDICES English 186 Misc. A problem such as inability to record or pla y back occurs . The card contains files that were sav ed using a device oth er than this camera.
187 Engl ish TR OUBLESHOO TING Bef ore taking your camera to the repair shop , check the foll owing ta ble f or a possible so lution to the prob lem. Camera Probl em Cause Action Reference page Pow e r No pow er . The battery pack is dead. Recharge the battery pack, or replace with a new battery pack .
APPENDICES English 188 Shooting An image is not captured when the [ ] button or [] b u t t o n i s pressed. The maximum number of images that can be captured or the maximum video clip recording time has been reached. Install a new card. 24 Delete the images that are not nece ssary .
189 Engl ish TROUBLESHOO TING Shooting A warning tone (beep-beep- beep) sounds , and it is not possible to take a picture using the self- timer . The battery pack is consumed. Install a sufficiently recharged battery pack. 23, 26 When zooming in or out, the zoom mov ement stops momentarily .
APPENDICES English 190 Shooting The icon appears, and shooting is not possible . The camera’ s internal temperature is high. Discontinue shooting, and wait f or the camera to cool down before using it again. — Monitor No playbac k image appears. The camera is not set to the pla ybac k mode.
191 Engl ish TROUBLESHOO TING Viewing images The image is too dark. The flash was bloc ked b y a finger or ot her object. Hold the camera correctly , and make sur e the flash is not obstructed. 53 The subject was too f ar away . Capture the image in the range of operation o f the flash.
APPENDICES English 192 Viewing images The image is too bright. The forced flash mode is selected. Selec t a different flash mode. 63, 87 The subject was too bright. Use the exposure compensation function. 104 The ISO sensitivity setting is incorrect. Set the ISO sensitivity to = .
193 Engl ish TROUBLESHOO TING Viewing images The image is not in focus . The subject is too close to the camera. Capture the image with the subject within the photographab le range. Select the correct focus setting for your needs. 57, 95 The fo cus setting is not correct.
APPENDICES English 194 Viewing images The colors of the images captured indoors are not correct. This is due to ambient lighting. Capture the image using the forced flash mode. 63, 87 The white balance setting is incorrect. Set the white balance se tting correctly .
195 Engl ish TROUBLESHOO TING Connect ing to a TV No image or sound. The camera is not correctly connected to the TV . F ollow the instruct ions t o make t he connection correctly . 142, 155 The TV input is not set correctly . Set the input on the TV to “VIDEO”.
APPENDICES English 196 Misc. The audio guide does not sound. The audio guide setting is set to “OFF”. Set the audio guide setting to “ON”. 132 The recording capacity is less than that indicated in the section “P ossible No . of Images / P ossible Shooting Time/ P ossible Recording Time” (page 204) .
197 Engl ish TROUBLESHOO TING Notes regar ding the Scene Select f eature a nd filters Scene Select * When recordi ng a video clip in dark surroundings, the shutter speed decreases to 1/ 15 sec in order t o produce a sufficiently bright image .
APPENDICES English 198 Filter About the scene select function and f ocus range settings i T he scene select functio n changes to = when the focus range is set to + . i E v en if you set the focus range to * , + or - , it changes to - when the scene select functio n is set to any setting other t han = .
199 Engl ish SPECIFICA TIONS Camera T ype Digital Movie Came ra (recording an d pla yback) Recorded image file f ormat Still images : JPEG format (DCF , DPOF , Exif 2.
APPENDICES English 200 Still image shooting mode (recording resolution) I :4 0 0 0 × 3000 pix els J :3 4 5 6 × 2592 pix els (appro x. 9 mill ion pix els: low compression) K :3 4 5 6 × 2592 pix els (appro x. 9 mill ion pix els: normal compression) Q :3 4 5 6 × 1944 pix els (appro x.
201 Engl ish SPECIFICA TIONS Exposure control type Exposure compensa tion av ailab le from t he Shooting Setting Screen (0 ±1.8 EV in 0.3 EV ste ps) Light-measuring mode Multi-section measuring, center- weighted measuring, spot measuring Range T otal mode: 10 cm (3.
APPENDICES English 202 Minimum subject illumination 4 lux: ) , high sensitivity mode or scene select Q function, 1/15 sec 15 lux: ) , scene select X function, 1/30 sec Image stabiliz er Electronic (video clip recording mode or still image shooting mode) Monitor 2.
203 Engl ish SPECIFICA TIONS Camera connector s Battery lif e i Until battery pack runs out when using a fully charged battery pack at a 25 °C (77 °F) ambient temper ature. i The operation time ma y v ary depending on the conditions of the batte ry pack and the conditions of use.
APPENDICES English 204 P ossible No. of Images/P ossible Shooting Time/ P ossible Recording Time i The maximum video clip continuous recording time is approx. 5 hours 30 minutes at the l setting, a nd approx. 7 hours at the d setting. i Up to 13 hours of continuous aud io recording is possible .
205 Engl ish SPECIFICA TIONS Concerning the m ulti-indicator The camera’ s mult i-indicator will light or flash depending on the different camera ope rations.
APPENDICES English 206 Supplied b attery pac k c har ger i T he VPC-CG9 GX model is supplied with a pow er cord that is appropriate for the region o f destination. i When using the supplied battery pack charger abroad, the po wer cord ma y need to be replaced in accordance with local requirements .
207 Engl ish SPECIFICA TIONS Other s Mac OS, Quic kTime are trademarks of Apple Inc., registered in the U .S. and other countries . Windows is a registered tr ademark of Microsoft Corporation in the USA and other countries . P entium is a registered tr ademark of Intel Corporation (USA).
APPENDICES English 208 Before capturing those importa nt shots, be sure to first take a test shot to confirm tha t y ou r camera is set up and ready to go i Sanyo Electric shall not be held responsib le f or any prob lems resulting from the use of this camera.
209 Engl ish HINTS FOR T AKING PICTURES T aking great pictures in di fficult surround ings is easier than y ou might think. By keeping a f ew points in mind and c hoosing the correct settings , y ou can create photos that you’ll be pr oud to displa y and share .
APPENDICES English 210 Photographing a moving subject Situation: Y ou would like to snap an acti on shot of a moving child or pet. The autof ocus is activa ted, but becau se the subject is mo ving, the image ma y be blurr ed.
211 Engl ish HINTS FOR T AKING PIC TURES Shooting portraits (portrait mode > ) Po in t s: i Choose a background that doesn’t detract from y our subject. i Move in close to y our subject. i Pa y attention to lighting and ho w it aff ects your subject.
APPENDICES English 212 Night photograph y (night view portrait mode / ) Po in ts : i Avoi d camera shak e. i Increase the ISO sensitivity . NO TE i C amer a shutter speed du ring night photog raph y is co nsiderabl e slower , so there is a much greater chance t hat your photog raphed image s will be blurry .
SANY O Electr ic Co., L td..
Ein wichtiger Punkt beim Kauf des Geräts Sanyo VPC-CG9GX Xacti (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sanyo VPC-CG9GX Xacti noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sanyo VPC-CG9GX Xacti - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sanyo VPC-CG9GX Xacti reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sanyo VPC-CG9GX Xacti erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sanyo VPC-CG9GX Xacti besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sanyo VPC-CG9GX Xacti verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sanyo VPC-CG9GX Xacti. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sanyo VPC-CG9GX Xacti gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
