Benutzeranleitung / Produktwartung SRT-4040 des Produzenten Sanyo
Zur Seite of 54
INSTR UCTION MANU AL SR T -4040 SR T -4040DC Real Time Vid eo Cassette Recor der English Magnétoscope en temps ré el Français Videogra bado r en tie mpo re al Español Please read this manual and accompanying “IMPORT ANT SAFETY INS TR UCTIONS” s heet carefully before connecting your VCR and operating it for the first time.
PRECA UTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RI SK OF ELECTRIC SHOCK, DO NOT REMOVE CO VER ( OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
PRECA UTIONS Location For safe operation and satisfactory performanc e of your VCR, keep the following in mind when selecting a place for its installation: œ Shield it from direct sunlight and keep it away fr om sources of intense heat. œ Avoid dusty or humid places.
CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ACCESSORY (S RT-4040 only) . . . . . . . . . . . . . . . . . . . 3 LOCATIONS OF CONTROLS AND INDICATORS .
LOCA TIONS OF CONTR OLS AND INDICA T ORS Front Panel 1 EJECT button 2 Cassette loading slot 3 STILL/PAUSE button SEARCH button MENU EXIT button 4 REW (rewind) button 5 PLAY button REC CHECK button 6 F.
LOCA TIONS OF CONTRO LS AND INDICA T ORS Digital Display 1 Mode display œ Warning display N flashes: Mode changed to non-recording mode while recording was in progress. M flashes: Problem with mechanism. C flashes: Clog detection has occurred. V flashes: Video loss has occurred.
LOCA TIONS OF CONTRO LS AND INDICA T ORS 6 Operation Indicators œ They display the actual operation mode. Operation Mode Indicator Record (REC) Record pause (REC PA USE) Playback ( PLAY) Still image .
LOCA TIONS OF CONTRO LS AND INDICA T ORS Back Panel (SRT-4040 only) 1 Battery compartment 2 ALARM IN (alarm trigger input) terminal 1 SHOT IN (single image recording trigger input) terminal 3 CONTROL .
LOCA TIONS OF CONTRO LS AND INDICA T ORS Back Panel (SRT-4040DC only) 1 Battery compartment 2 ALARM IN (alarm trigger input) terminal 1 SHOT IN (single image recording trigger input) terminal 3 CONTRO.
CONNECTIONS Connect the video camera and TV monitor as shown in the figure below. NOTE: Before making the connections, make sure the devices are disconnected from the power outlet.
ON-SCREEN MENU Main Menu To access on-screen menu 1 When no menu is displayed on-screen, pres s the MENU button. ø The MAIN MENU appears. MAIN MENU <MAIN@MENU> 1.LANGUAGE/CLOCK@SET 2.DISPLAY/SW@OUT@SET 3.GENERAL@SET 4.WARNING@OUT/CONTR.SET 5.ALARM/SERIES@REC@SET 6.
ON-SCREEN MENU WARNING OUT/CONTRO L SET menu <WARNING@OUT@SET>SET@UP ALARM@@@@@@@@@@@@Y NON@REC@@@@@@@@@@N MECHA.PROBLEM@@@@Y VIDEO@LOSS@@@@@@@Y CLOG@DETECT.
SETTING THE LANGU A GE AND CLOCK Language Setting English, French, Spanish or Portuguese can be selected by the user. 1 Turn the power on to all devices used. 2 Press the MENU button to display the MA IN MENU. ø The “1.LANGUAGE/CLO CK SET” line appears highlighted.
SETTING THE LANGU A GE AND CLOCK Automatic Daylight Saving Time Adjustment 1 Follow steps 1 to 3 under “ Language Setting ” on page 12. <LANGUAGE/CLOCK@SET> *LANGUAGE-LANGUE-IDIOMA @@@@@@@@@.
SUPERIMPOSE DISPLA Y Selecting the Superimpose Display You can select to display or not the date, time, tape speed mode and number of alarm recordings. 1 Turn the power on to all devices used. 2 Press the MENU button to display the MA IN MENU. 3 Press the l (or j ) button to select the “ 2.
VIDEO CASSETTE T APES Use only video cass ette tapes bearing the VHS logo. This VCR was primarily designed for use with T-120 and T-160 cassette tapes. It is recommended that y ou use T-120 or T-160 standard grade VHS video cass ette tapes for optimal performance.
VIDEO CASSETTE T APES Correct tape thread check function This function checks to make sur e that the cassette has been correctly loaded so that recording c an be carried out.
T APE MANA GEMENT This VCR is equipped with a tape management function. Using this function you can protect pr evious recordings and prevent overuse of the tape by contr olling the tape protection term (number of days), the maximum number of re-recordings of the tape and the recording group.
T APE MANA GEMENT Setting the Tape Management Function 1 Press the MENU button to display the MA IN MENU. 2 Press the l (or j ) button to select the “ 6.
T APE MANA GEMENT Tape Management Conflict Display If a conflict that prevents record ing is found when the tape management function checks the tape data, the (TAPE MANAG EMENT) menu appears with the conflicting setting flashing and the VCR go into the st op mode.
NORMAL RECORDING Normal Recording Before starting œ Turn the power on to all devices used. œ Load a cassette tape with its erasure-prevention tab intact. œ Set the ON SCREEN switch to the “ ON ” position. NOTES: œ If “ TAPE IN MODE ” is set to “ REC ” in the (GENERA L SET) menu, recording will s tart.
NORMAL RECORDING Record Pause Recording can be interrupted temporarily. 1 Press the STILL /PAUS E button during recording. ø The pause/still indicator “ : ” flashes.
NORMAL RECORDING Clog Detection This VCR is equipped with a clog detection function. The recording quality is monitored automatically. W hen the heads are dirty and the recording quality deteriorates,.
NORMAL RECORDING Setting the Mode at the End of the Tape You can select the mode on the VCR when the tape reaches the end during recording. 1 Press the MENU button to display the MA IN MENU. 2 Press the l (or j ) button to select the “ 3.GENERAL SET ” line, then press the ENTER button.
A UT OREPEA T RECORDING Autorepeat Recording The same tape can be recorded over many times . œ Follow the Before starting steps, under “ NORMAL RECORDING ”. 1 Press the MENU button to display the MA IN MENU. 2 Press the l (or j ) button to select the “ 3.
ALARM RECORDING By connecting the ALARM IN terminal to a normally open door switch, an interphone, etc., a record ing can be done only when necessary. Alarm Recording Setting Alarm recording is performed when there is an input (trigger) at the ALARM IN terminal.
ALARM RECORDING Alarm Recording Reset Function To stop the recording of an alarm, close the connection between the ALARM RESET IN terminal and the COM terminal during alarm recording. Alarm Recording Counter Display œ During alarm recording, “ AL ” and “A” will be flashing on the digital display.
ALARM RECORDING Alarm Search To go to the beginning of a desired alarm recording. 1 Press the SEARCH button during stop mode. ø “ AL SEARCH 01 ” appears on screen. 2 Press the l (or j ) button to set the desired alarm number (01 to 99), then press the FF (or REW ) button.
PR OGRAM TIMER RECORDING There are three program timer recording methods, daily recording, weekly recording or r ecording on certain days of the week. Exampl e 1: To record on ever y Saturday from 9:00 AM to 5:00 PM (17:00), in 24-hour mode (recording speed).
PROGRAM TIMER RECORDING A timer recording of more than 24 hours can only be set on the 7th (SAT) and 8th (DAILY) lines of the (TIMER SET) menu. Exampl e 2: To record every week fr om Saturday at 9:00 P M (2 1:00 ) to Mond ay at 7:0 0 AM, in 40-hour mode (recording speed).
PROGRAM TIMER RECORDING Setting the Holidays By setting the holidays, timer rec ording will be conducted on those days, as set for Sunday s. 1 Press the MENU button to display the MA IN MENU. 2 Press the l (or j ) button to select the “ 8.HOLIDAY SET ” line, then press the ENTER button.
PROGRAM TIMER RECORDING NOTES: œ During timer recording or timer recording stand-by, all the buttons on the VCR, except the TIMER button and the buttons to set/cancel the secur ity lock (see page 37), are disabled. œ If the power fails, the recording will be inter rupted.
RECORDING USING AN EXTERNAL TIMER INPUT Recording can be controlled by an exter nal start/stop signal input at the EXT T IMER IN terminal. While there is input at the EXT TI MER IN terminal, the external input indicator “E” will light on the digital display and the input will be recorded.
SERIES RECORDING Using 2 VCRs or more, the series recording function lets you switch recording from one unit to the nex t (only with VCRs of the same model as this one). Series Recording Setup œ Connect 2 VCRs or more as illustr ated below. œ Set the “ TAPE ” item in the (GENERAL SE T) menu according to the duration of the tape used.
SINGLE IMA GE RECORDING The single image recording function of this VCR can be used to create image data files or animations. Single Image Recording Setup 1 In stop mode, press the REC/PLAY SPEED l button, to set the recording speed to “ 000 ”. 2 Press the MENU button to display the MA IN MENU.
NORMAL PLA YB A CK Normal Playback 1 Turn on the power to the VCR and TV monitor. 2 Load the video cassette tape. 3 Press the REC/PLAY SPEED l button to select the playback speed mode. ø The selected playback speed mode is displayed on the digital display.
SPECIAL PLA YB A CK Picture Search (Forward and Reverse) 1 Press the FF (or REW ) button, during normal playback. ø The image can be seen while the tape is advanced (or rewound) at high speed. 2 To return to normal playback, press the PLAY button. NOTES: œ During picture search, noise (horizontal bars) will appear in the picture.
D A Y/TIME SEARCH Day/Time Search This searches for a s pecified day/time for still images to be played back. 1 Press the SEARCH button three times during stop mode. ø “ T/D SEARCH 01 00:00 ” will be displayed on screen. 2 Press the l (or j ) button to set the desired day, then press the ENTER button.
CLOCK ADJUSTMENT The time for the second and subsequent VCRs can be set to the same time as the first VCR. A signal from a separate device can also be us ed to set the time for the second and subsequent VCRs to the same time as the first VCR.
SETTING THE CASSETTE EJECT MODE Cassette Eject Setup When using two or more VCRs, the cassette tapes of all the VCRs or some of the VCRs can be ejected at the same time. NOTE: œ “ TERMINAL SET ” in the (OTHERS) menu should always be set to “ SET2 ”.
SYNCHR ONIZA TION CONTR OL When two or more of this model of VCR are connected together, the VCRs can be operated simultaneously just by operating the VCR that has been set to “ MAST ER ”, without using a system controller (sold s eparately). There are two modes available: operator mode and administrator/installer mode.
SYNCHR ONIZA TION CONTROL Setting the Cassette Eject Mode Operator mode can be used to eject cassettes for all VCRs or for specified VCRs. 1 Follow steps 1 to 4 under “ Operator Mode ”. 2 Press the l (or j ) button until the “ EJECT MODE ” setting is highlighted, then press the ENTER button.
SETTING FOR RS-485 USE The RS-485 interface can be used to operate the VCR using a SANYO brand sy stem controller. NOTES: œ This can only be used when the RS-485 interface board (VZU-40485) is installed. œ Refer to the instruction manual for the VZU-40485 and/or the system controller .
CHECKING POWER F AILURE, F AILURE DUE TO CONDENSA TION AND USAGE DURA TION 1 Press the MENU button to display the MA IN MENU. 2 Press the l (or j ) button to select the “ 9.
OUTPUT TERMINALS TAPE END OUT Terminal œ During recording, when the end of the tape is reached or when the tape counter reading indicates 8 hours, the output becomes 0V (Low). During autorepeat recording, the output becomes 0 V ( Low) for about 2 seconds only.
OUTPUT TERMINALS SW OUT Terminal When recording, a pulse signal is output at the SW OUT terminal. This terminal is usually connected to the switc h input (SW IN) of devices lik e a camera switcher unit, or a quad compressor. SW OUT Term i nal Output Setting 1 Press the MENU button to display the MA IN MENU.
OUTPUT TERMINALS WARNING OUT Terminal œ The WARNING OUT terminal output becomes 0 V (Low) in accordance with the (WA RNING OUT/CONTROL SET) menu. WARNING OUT Terminal Out put Sett ing 1 Press the MENU button to display the MA IN MENU. 2 Press the l (or j ) button to select the “4.
OUTPUT TERMINALS REMOTE Jack Remote control of the VCR is possible by c onnecting a remote controller with a circuit such as indicated below, to the REMOTE jack. NOTES: œ Use a 3.5 mm mini-jack type plug. œ The connection should be done using a shielded cable no more than 5 meters long.
MAINTENANCE Daily Inspection The following daily inspections are recommended in order to assure long-term and trouble-free operation of the unit. The daily inspections are particularly important if us ing autorepeat recording. Inspection Procedure 1 Turn on the power to the VCR, camera, TV monitor and other connected devices.
MAINTENANCE Maintaining and Checking The Mechanism To maintain the VCR functions and features working properly, and to avoid damages or dirt on the tape, it is recommended to follow the maintenance points and periodicity indicated below. For detailed information, please contact your dealer.
TR OUBLESHOO TING GUIDE If the unit does not operate normally when you follow the instructions indic ated in the manual, please refer to the table below.
SPECIFICA TIONS General Specifications Video head system Dual-azimuth 4-head rotating helical scanning system: Dual azimuth 2-head for record and standard playback Dual azimuth 4-head for forward pict.
SPECIFICA TIONS Other Specifications Operating temperature range 5 ° C to 40 ° C (41 ° F to 104 ° F) Operating humidity range 80% or less Power requirements ( SRT -4040 only ) 120V AC,60Hz Power r.
SANYO INDUSTRIAL VCR WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered t o and picked up from an Authorized Sanyo Service Center at the user’ s expense, unless specifically stated otherwise i n this warranty.
Ein wichtiger Punkt beim Kauf des Geräts Sanyo SRT-4040 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sanyo SRT-4040 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sanyo SRT-4040 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sanyo SRT-4040 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sanyo SRT-4040 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sanyo SRT-4040 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sanyo SRT-4040 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sanyo SRT-4040. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sanyo SRT-4040 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
