Benutzeranleitung / Produktwartung DSR-M800 des Produzenten Sanyo
Zur Seite of 50
Digital Video Recorder About this manual Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference. ALARM REC/STOP LOCK/REMOTE USB POWER SEARCH MENU RESET MENU REVIEW CUE EXIT/OSD PLAY/ STOP STILL TIMER FULL LAN (LINK/ACT.
1 PRECAUTION CAUTION: Changes or modifications no t expressly approved by the manufacturer ma y void the user’ s authority to operate this equipment. This equipment has b een tested and found to comply with the limits for a Class B digital device, pursuant to pa rt 15 of the FCC Rules.
2 INTRODUCTION Main features This digital video recorder can be used to store images recorded by a monitoring camera onto its built-in hard disk. Comes with a large-capacity (120 GB or 240 GB) hard disk. For the 120 GB model, a hard disk upgrade is available (sold separately) that gives you a total of 240 GB of memory.
3 CONTENTS 1 BEFORE USE .. ................ ............. ................. ..5 Notes on handling internal har d disk drive components ............... ................ ................ ......5 Do not use the digital vid eo recorder in the following locations: .
4 CONTENTS INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER MENU CONFIGURATION AND OPERATIONS ..... ................ ................ ..........22 Displaying the menu screen and sub-menu screens ................ ................ .............
5 1 BEFORE USE Notes on handling internal hard disk drive components This unit has a b uilt-in hard disk drive (HDD). Be sure to observe the following poi nts carefully when operating, setting- up and servicing the unit. Do not subject the unit to shocks or vibration.
6 1 BEFORE USE INTRODUCTION SETTINGS OTHER OTHER OTHER OTHER z To be prepared for malfunctio ns or accidents, back up important recordings periodically, or record using mirroring. Hard disk protection The hard disk is checked automa tically at power ON.
7 2 NAMES AND FUNCTIONS OF PARTS Front panel 1. POWER indicator Lights when the power is ON. Flashes when there is a problem with th e hard disk or fan. ( J P.10) 2. [TIMER] button and ind icator ( J P.14) When the button is pressed while reco rding or stopped, the digital vid eo recorder enters timer record standby, and the indicator light s.
8 2 NAMES AND FUNCTIONS OF PARTS INTRODUCTION SETTINGS OTHER OTHER OTHER OTHER Rear panel 1. FAN 2. AUDIO IN terminal 3. AUDIO OUT terminal 4. LAN terminal ( J P.
9 3 INSTALLATION AND CONNECTIONS This section describes how to connect the digital video recorder to the CCTV camera and other de vices. Be sure to read the instruction manuals for each co nnected device. Make connec tions carefu lly. Improper connections can cause smoke or malfunctions.
10 3 INSTALLATION AND CONNECTIONS INTRODUCTION SETTINGS OTHER OTHER OTHER OTHER z Connect the cable of the wired remote control (VA- RMN01) (sold separately) to the remote control input terminals (among th e control terminals). Cut the plug off the cord, and connect the red wire to “REMOTE” and the bare wire to “C”.
11 1 SCREEN DISPLAY AND POSITION At power ON, the operation di spl ay area appears at the top left of the monitor scree n.The operation display area shows the date/time, image qual ity, remaining time, and other information needed for operation s.
12 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 2 SETTING THE LANGUAGE/CLOCK This section describes ho w to set the langu age displayed on the monitor and how to set the digital vi deo recorder’s internal clock. [Settings] ( indicates initial setting.
2 13 SETTING THE LANGUAGE/CLOCK (Initial setting: 01-01-2003 W ED 00:00:00) Be sure to set the correct date and time. The digi tal video recorder stores the times of recordings for use in operations such as playback and search/playback.
14 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 3 NORMAL RECORDING/TIMER RECORDING Follow the steps below to record the monitored image onto the hard disk. 1 Press the [REC/STOP] button. The REC indicator lights.“ z ” (the recording symbol) appears on the screen, and recording sta rts.
15 4 ALARM RECORDING Follow the steps below to have the digital video recorder record an alarm image only when alarm input is dete cted during recording. z Check that the cable of the device required for alarms is connected to the ALARM terminal. ( J P.
16 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 5 NORMAL RECORDING/TIMER RECORDING PLAYBACK Follow the steps below to play back images record ed on the hard disk. 1 Press the [ ] button. The [ ] button lights, and “ ” appears in the op eration display area.
5 17 NORMAL RECORDING/TIME R RECORDING PLAYBACK 1 During playback, press the [ ] button. The image be comes a still ima ge (freezes). appears in the operation display area. 2 Press the [ ] button. With a still image displayed, press the [] button. The still image advan ces by one frame.
18 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 6 SEARCHING FOR RECORDED IMAGES Images recorded on the hard disk can be searched and played back.
6 19 SEARCHING FOR RE CORDED IMAGES 3 Press the [ ] or [ ] button to select the image to play back. The selected alarm image is displayed in the previe w screen. You can display up to 8 alarm images. z To display the next (previous) image Press the [ ] or [ ] button.
20 6 SEARCHING FOR RE CORDED IMAGES INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 4 Press the [ ] button, and set the date/time to search. Example: To search for th e image from October 26, 2003, 8:00 PM (1) Press the [ ] or [ ] button to select “10” (October).
21 7 PREVENTING ACCIDENTAL OPER ATION (KEY LOCK FUNCTION) Follow the steps below to set the key lock function , preventing accidental pressing of the operation buttons. 1 With the digital video recorder recording or stopped, press the [ ] button for about 3 seconds.
22 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER MENU CONFIGURATION AND OPERATIONS This section describes the menu configuration, and which menu item to select for each operation. 1 Press the [MENU] button. The <MAIN MENU> screen appears.
23 MENU CONFIGURATION AND OPERATIONS The screens below are the sub-menu screens displ ayed by selecting items from the MAIN MENU. Pressing the [MENU] button while a sub-menu screen is displayed switches the display directly to the next sub- menu screen.
24 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 1 LANGUAGE/CLOCK SET You can perform the following functions: Change the language used to display on-screen information.* Set the date and time displaye d on the normal screen.* Set the clock to adjust automat ically for daylight savings time.
1 25 LANGUAGE/CLOCK SET You can set the date/time at wh ich the time is switched from standard time to daylight savings time, and the date/time at which the time is switched back again.
26 1 LANGUAGE/CLOCK SET INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 5 Press the [EXIT/OSD] button. The display returns to the normal screen. 6 Use the same procedure to set the <EXT.CLOCK SET> time on the second digital video recorder.
27 2 REC MODE SET [Settings] ( indicates initial setting.) * When item (3) “OVER WRITE” is set to “O FF” and the hard disk becomes full, the digital video recorder performs the operation set by item (4) “DISK FULL RESET”.
28 2 REC MODE SET INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 1 Press the [MENU] button. The [MENU] button lights, a nd the <MAIN MENU> scree n appears. 2 Select “2. REC MODE SET”, and press the [ ] button. The <REC MODE SET> scree n appears.
29 3 TIMER REC SET You can set recording start/stop times using the timer function. You can set times at which to start and stop recording on each specified day of the week. (1) WEEK Used to select the days of the week for timer settings. When each day in the “WEEK” column is flashing, it can be set to other days.
30 3 TIMER REC SET INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 5 Press the [ ] button to move the cursor to the next item. Each time you press the [ ] button, the cursor moves to the following items: Day J “START” time (hours, minutes) J “S TOP” time (hours, minutes) J “ON”/”OFF”.
3 31 TIMER REC SET 3 Press the [ ] or [ ] button to change the "STOP" time from “--:--” to “**:--”, then press the [ ] button. The “DLY” item on the 8th line automatically changes to “TUE” (the day after the day set on the 7th line), and flashes.
32 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 4 DISPLAY/BUZZER SET You can erase the date, time or oth er information from the operation display area of the playback screen. This sub- menu also lets you set a warning buzzer to sound for alarms or when the hard disk space reaches zero.
4 33 DISPLAY/BUZZER SET 1 Press the [MENU] button. The [MENU] button lights, a nd the <MAIN MENU> scree n appears. 2 Select “4. DISPLAY/BUZZER SET”, and press the [ ] button. The <DISPLAY/BUZZER SET> screen appears. 3 Press the [ ] and [ ] buttons to select the desired function, then press the [ ] button.
34 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 5 SECURITY LOCK SET You can set passwords that rest rict use of the digital video recorder to administrator s and designated users, preventing unauthorized opera tion.
5 35 SECURITY LOCK SET 3 Press the [ ] button. The first password entry bar “-” flashes. 4 Press the [ ] and [ ] buttons to select the character to enter. Example: Selecting “ 1” 5 Press the [ ] button. The second pa ssword entry bar flashes. 6 Use the same procedure to enter the remaining digits (“23456AB” in this example).
36 5 SECURITY LOCK SET INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 4 When you have finished making th e setting, press the [ ] button. The cursor moves to “O FF” (which flashes). 5 Press the [ ] and [ ] buttons to select “ON”, then press the [ ] button.
37 6 RS-485/NETWORK SET This section describes how to make the RS-485 terminal connections/settings need ed to connect to an extern al device, and how to make the network connections nee ded to connect to a PC. You can make digital video recorder menu setti ngs and monitor images from a PC via a network (LAN).
38 6 RS-485/NETWORK SET INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER z When connecting the digital video recorder to a net work, check the IP address with the network administrator. z Up to 250 digital video recorders can be connected with manually-set IP addresses.
39 7 POWER FAILURE/USED TIME You can check the date/time of power failures and the amount of hard disk operation time. 1 Press the [MENU] button. The [MENU] button lights, a nd the <MAIN MENU> scree n appears. 2 Select “7. POWER FAILURE/USED TIME”, and press the [ ] button.
40 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 8 MENU UPLOAD/DOWNLOAD You can save menu setting values onto a CompactFlash card. This sub-menu also lets you rea d menu setting values saved on CompactFla sh cards. z If “COPY MIRRORING SETTINGS” is se t to “YES”, the hard disk may be initial ized.
8 41 MENU UPLOAD/DOWNLOAD 1 Press the [ ] button. The <WARNING> screen ap pears. “NO” flashes. 2 Press the [ ] and [ ] buttons to select “YES”, then press the [ ] button. Downloading starts. When you have finished loadi ng, the display returns to the <MENU UPLOAD/DOWNLOAD> screen.
42 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 9 INITIALIZE/ADD HDD This section discribes how to initialize the hard disk or add a hard disk. 1 Press the [MENU] button. The [MENU] button lights, a nd the <MAIN MENU> scree n appears.
9 43 INITIALIZE/ADD HDD To add a hard disk, contact a Sanyo service center. When adding a hard disk, use an add-on type hard disk uni t (sold separately). [Setting conditions] z After adding a hard disk, be sure to initialize it. Note that both hard disks will be initialized, an d any data on the original hard disk w ill be erased.
44 INTRODUCTION O PERATION SETTI NGS OTHER OTHER OTHER OTHER 1 INTERFACE SPECIFICATIONS Data format Communicatio n protocol A proprietary Sanyo protocol (SSP: Security Serial Protocol) is used. Use of a special controller for operation is recommended.
1 45 INTERFACE SPECIFICATIONS The table below shows the commands supported by the digital video recorder. DVR/VCR command table Left digit Right di git 01234567 0 TIMER ON/OFF 1 2 3 SHIFT I SHIFT J 4 .
46 OTHER OTHER OTHER OTHER 2 SPECIFICATIONS Note that product appe arance an d specifications a re subject to cha nge without pr ior notice. Hard disk capacity 120 GB or 240 GB T elevision system NTSC.
2 47 SPECIFICATIONS (mm) Dimensions ALARM REC/STOP LOCK/REMOTE USB POWER SEARCH MENU RESET MENU REVIEW CUE EXIT/OSD PLAY/ STOP STILL TIMER FULL LAN (LINK/ACT.
OBLIGATIONS In order to obtain warranty service, the product must be deliver ed to and picked up fr om an Authorized Sanyo Service Center at the u ser’s expense, unless specifically stated otherwise in th is warranty. The names and addresses of Authorized Sanyo Service Centers may be obtai ned by calling the toll-free number listed below.
Printed on recycled paper Imprimé sur du papier recyclé Impreso en papel reciclad o 1AC6P1P261 2--C L8HAC/US, US2 (0302TR- SY) SANYO Electric Co., Ltd .
Ein wichtiger Punkt beim Kauf des Geräts Sanyo DSR-M800 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sanyo DSR-M800 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sanyo DSR-M800 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sanyo DSR-M800 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sanyo DSR-M800 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sanyo DSR-M800 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sanyo DSR-M800 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sanyo DSR-M800. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sanyo DSR-M800 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
