Benutzeranleitung / Produktwartung DP37647 des Produzenten Sanyo
Zur Seite of 48
Model No: DP37647 Owner’ s Manual Table of Contents . . . . . . . . . . . 5 Frequent Asked Questions (FAQ) . . . . . . . . . . . 47 © 2007 Sanyo Manufacturing Corporation If you need additional assistance? Call toll free 1.
2 W elcome to the W orld of Sanyo Thank you for pur chasing this Sanyo High-Definition Digital T elevision. Y ou made an excellent choice for Performance, Reliability , Featur es, V alue, and Styling. Important Information Befor e installing and operating this DTV , r ead this manual thor oughly .
3 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICA TES THA T DANGEROUS VOL T AGE CONSTITUT- ING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT .
4 15. If an outside antenna is connected to the televi- sion equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.
5 TO THE OWNER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . 3 ~ 4 FEA TURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SPECIFICA TIONS . . . . . . . .
6 37" Wide-Screen LCD-HDTV Detachable Stand Trilingual Menu Options (English, Spanish, or French) Integrated Digital/Analog Tuner Energy Saver Mode (Backlight) Automatic C.
7 SPECIFICA TIONS SCREEN SIZE: 37" Wide-Screen SCANNING FORMA T : 720p (All Signals are Converted to 720p) RESOLUTION (P ANEL): 1366 x 768 (WXGA) RF ANTENNA INPUT : 75 ohm—Digital/Analog POWER .
8 RIGHT SIDE P ANEL (VIEWED FROM FRONT) These keys operate exactly like the Remote Control keys. (Go to page 24, for more detail information, if needed.
9 DTV BACK— RIGHT SIDE (VIEWED FROM BACK) (CONTINUED ON NEXT P AGE.) Analog Audio Out (L/R) Jacks— Connect external audio equipment here. See P AGE 23 for Audio Out jack connections. S-Video Input (VIDEO1)— To enhance video detail use the S-Video jack instead of the Video jack, if available on your external equipment.
10 DTV BACK— RIGHT SIDE (VIEWED FROM BACK) (Continued) HDMI INPUT1/2/3 (High-Definition Multi- media Interface), P AGE 7— Connect digital video equipment to this jack. It takes only one cable (not supplied) to communicate between audio/video equipment and this DTV.
11 OPTIONAL FEA TURES W ALL MOUNTING Use the threaded inserts on the back of your DTV to secure it using a wall mounting kit. (VESA standard inter- face 200 x 200.) Note: Wall Mounting kit is not supplied. LCD Mounting screws measurements: M6 Diameter, Length—12mm (maximum).
12 75 Ohm Coaxial Cable with F-Connector — Used to connect a signal to your digital or Analog RF Antenna In terminal. Coaxial Digital Audio —Use this cable to connect the DTV‘s digital audio output to a multichannel audio receiver.
13 CHOOSE YOUR CONNECTION Digital Signal Compatible External Cables Needed Go to Connections Equipment (Not Supplied) Page 16 17 18 This DTV is designed to handle several different connec- tions making it compatible with Digital and Analog devices.
14 1 Install batteries in remote control (2AA, not included). 2 Connect Signal to the DTV’s Integrated Analog / Digital 75 ohm Antenna Input terminal. GETTING ST AR TED (REQUIRED INITIAL SETUP) PRECAUTIONS T o ensure safe operation, please observe the following precautions: Replace both batteries at the same time.
15 3 Plug AC Power Cord (supplied) into an electrical outlet as shown here. 5 Perform “All Channel Search.” The All Channel Search will search for off-air digital and analog chan- nels, and analog cable channels. The DTV can receive cable or off-air channels, but not at the same time.
16 HDMI CONNECTIONS (INCLUDES HDCP COPY PROTECTION)— Receiving the ultimate picture HDMI CABLE [Gently insert this cable to HDMI jack for Audio / Video input.
17 HDMI TO DVI CABLE (CABLES NOT SUPPLIED.) DVI TO HDMI INPUT1 CONNECTIONS (INCLUDES HDCP COPY PROTECTION)— Receiving the ultimate picture HDMI INPUT1 CONNECTION: Connection Option 2 1 Connect the Set-top Box (STB) DVI Output to the DTV’s HDMI INPUT1.
18 SET -TOP BOX ( HD Satellite, HD Cable, etc.) 1 Connect a Component Cable to the VIDEO2 Green, Blue, and Red video jacks. 2 Connect an Audio Cable to the matching VIDEO2 White and Red audio jacks. 3 Press INPUT to select Video 2 to view the program.
19 1 Connect a Component Cable to the VIDEO3 Green, Blue, and Red video jacks. 2 Connect an Audio Cable to the matching VIDEO3 White and Red audio jacks. 3 Press INPUT to select Video 3 to view the program. Note: VIDEO2 and VIDEO3 jacks have identical functions.
20 VIDEO2 & 3 COMPONENT JACKS: Connection Option 3 1 Connect a Component Cable to the VIDEO2 / 3 Green, Blue, and Red video jacks. 2 Connect an Audio Cable to the VIDEO2 / 3 White and Red audio jacks. 3 Press INPUT to select Video 2 or Video 3 to view the program.
21 CONNECTING ANALOG CABLE, CABLE BOX, VCR, AND AN ANTENNA TO THE DTV VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 1 VCR 1 Connect Analog Cable Box “Antenna Out” to the VCR “Antenna In.” 2 Connect the VCR AV out jacks to VIDEO1 Yellow , White, and Red jacks.
22 CONNECTING ANALOG CABLE, VCR, AND AN ANTENNA TO THE DTV VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 2 VCR 1 Connect Analog Cable system to the VCR “Antenna In.” 2 Connect the VCR AV out jacks to VIDEO1 Yellow , White, and Red jacks. 3 Connect an Antenna to the DTV ANT terminal.
23 CONNECTING A DVD PLA YER TO THE DTV DVD PLA YER S-VIDEO JACK VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 3 “No Signal” will appear randomly on the screen when no signal is detected at the video jack. Check Audio / Video connections. Check external equipment connections.
24 CONNECTING AN A V RECEIVER TO THE DTV DTV AUDIO OUT JACKS (DIGIT AL & ANALOG) DTV AUDIO OUT COAXIAL CABLE A V RECEIVER No Sound or Poor Sound Check external equipment connections.
25 CONNECTING A STEREO AMPLIFIER TO THE DTV STEREO AMPLIFIER DTV AUDIO OUT 1 Connect a Stereo Amplifier to the TV Audio Out jacks as shown. Note: Do not connect external speakers directly to the DTV.
26 REMOTE CONTROL OPERA TION Input Key —Press to select the program source to watch: Analog RF Digital RF Video 1 Video 2 Video 3 HDMI 1 HDMI 2 HDMI 3 Analog RF. Number Keys —Two keys must be pressed to select a direct channel.
27 REMOTE CONTROL OPERA TION 1 4 5 6 7 8 0 9 2 3 POWER INPUT INFO RECALL MENU CAPTION EXIT VOL RESET A UDIO PIX SHAPE CH ENTER 1-- MUTE SLEEP (CONTINUED ON NEXT P AGE.) Info Key— Press to display the Digital and Analog Full Banner information.
28 REMOTE CONTROL OPERA TION (Continued) Sleep Key— Press this key then the “ 0 ” key to set the Sleep Off Timer. Time can be set in 30-minute increments up to 3 hours. Note: The Sleep Timer cancels when the TV is turned off or if a power failure occurs .
29 REMOTE CONTROL OPERA TION (Continued) Remote Control will NOT work the T V. Check batteries. Check if T V is plugged in Replace batteries. Aim remote control at front of TV. SYMPTOM CHECK THESE CONDITIONS TR Y THESE SOLUTIONS If you continue to experience problems, please call toll free 1-800-877-5032.
30 DTV ADJUSTMENT AND SETUP MENU NA VIGA TION MAP (Composite view) MAIN SUB MENUS All Channel Search Digital Cable Search Digital Add-on Search No Ye s No Ye s No Ye s Analog Antenna Signal Cable VHF/.
31 MENU OPTION— ALL CHANNEL SEARCH 1 Press the MENU key to display the Main menu. 2 Use the CURSOR keys to highlight the All Channel Search. Press ENTER . 3 Use the CURSOR key to select Yes . Press ENTER . The All Channel Search will search for off-air digital and analog channels, and analog cable channels.
32 MENU OPTION— DIGIT AL CABLE SEARCH (Optional) IMPORT ANT F ACTS: This DTV maintains only one database of digital channels. Therefore, when you search for ClearQAM digital cable channels, the data- base of antenna digital channels will be deleted.
33 MENU OPTION— DIGIT AL ADD-ON SEARCH Cannot select menu option, DIGITAL ADD-ON SEARCH. Did the word Not A vailable appear on-screen? DTV must be connected to a digital signal. The DTV is in the Analog mode, therefore, try performing another “All Channel Search.
34 MENU OPTION— ANALOG ANTENNA SIGNAL (Optional) HELP HINTS (PROBLEMS/SOLUTIONS) SYMPTOM CHECK THESE CONDITIONS TR Y THESE SOLUTIONS 4 Use the CURSOR keys to choose Cable or VHF/ UHF . Press ENTER . Use this feature to switch between analog off-air channels and analog cable channels.
35 MENU OPTION— CHANNEL SCAN MEMOR Y Cannot select or scan some channels. Channels may be removed from memory. Check antenna connections. NO digital signal being broadcast. Weak Signal. V-Guide is set to block programming. Select Channel Scan memory and manually add channels or start an “All Channel Search.
36 MENU OPTION— CHANNEL SCAN MEMOR Y Cannot select or scan some channels. Channels may be removed from memory. Check antenna connections. NO digital signal being broadcast. Weak Signal. V-Guide is set to block program- ming. Select Channel Scan memory and manually add channels or start an “All Channel Search.
37 MENU OPTION— DIGIT AL CAPTION 1 Tune to a Digital Channel. 2 Press the MENU key to display the Main menu. 3 Use the CURSOR keys to highlight Digital Caption. Press ENTER . 4 Use the CURSOR keys to highlight an option. Press ENTER . Closed-Captioning is text information transmitted along with the picture and sound.
38 MENU OPTION— DIGIT AL CAPTION (Continued) NO Captioning Cannot customize Caption. Check if station is broadcasting a Closed-Caption signal. Digital Caption signal not broadcast. Press CAPTION key to select Captioning. Press CAPTION key to select Analog captioning.
39 MENU OPTION— V -GUIDE (P ARENT AL CONTROL) NOTE: THIS FEA TURE IS DESIGNED TO COMPL Y WITH THE UNITED ST A TES OF AMERICA ’S FCC V -CHIP REGULA TIONS.
40 OPERA TING TIPS: You can block portions of a DTV rating by choosing one or more of the Content ratings (D, L, S, and V). By blocking just the L and S content ratings of TV-14, for example, TV- 14 rated programs with a D and/or V content rating could still be viewed.
41 MENU OPTION— V -GUIDE (P ARENT AL CONTROL) Continued ALL CHILDREN— Program is designed to be appropriate for children ages 2-6. DIRECTED TO OLDER CHILDREN— Program is designed for children 7 and above. Material may include mild fantasy violence (FV) or comedic violence.
42 1 Press the MENU key to display the Main menu. 2 Use the CURSOR keys to highlight Picture/Sound . Press ENTER . 3 Use the CURSOR keys to highlight Auto (factory preset settings) or Manual . Press ENTER . MENU OPTION— PICTURE/SOUND (CONTINUED ON NEXT P AGE.
43 MENU OPTION— PICTURE/SOUND (Continued) MANUAL ADJUSTMENTS (CONTINUED) 4 Use the CURSOR keys to select the option you want to adjust. 5 Then use the CURSOR < > keys to make an adjustment. No picture, sound (Digital Picture) Poor Picture/Sound (watching Analog) Weak Signal.
44 MENU OPTION— MENU LANGUAGE 1 Press the MENU key to display the Main menu. 2 Use the CURSOR keys to highlight Menu Language . Press ENTER . 3 Use the CURSOR keys to select English , Español, or Français.
45 MENU OPTION— ENERGY (POWER) SA VER This power saving feature reduces the brightness level. The power saving function options: • OFF – the feature is off and the power consumption is normal. • LOW – power saving level is low and the brightness level is lower than normal.
46 GLOSSAR Y OF TERMS Analog— Commonly refers to the current NTSC transmission standard for televisions. Aspect Ratio— The ratio of the width to the height of a TV screen independent of the screen size (x units wide by x units high). Analog is 4:3; Digital can be 4:3 or 16:9 (also called wide screen).
47 1. What channel do I put my television on to watch a DVD player? To determine where the DVD player is connected, turn the DVD player and TV on and set the TV on channel 3. Then press the INPUT key on the remote control to scroll through the signal inputs to locate the DVD player startup screen.
For your protection in the event of theft or loss of this product, please fill in the information requested below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS. Model No.______________________________ Date of Purchase _________________________ Serial No.
Ein wichtiger Punkt beim Kauf des Geräts Sanyo DP37647 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sanyo DP37647 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sanyo DP37647 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sanyo DP37647 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sanyo DP37647 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sanyo DP37647 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sanyo DP37647 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sanyo DP37647. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sanyo DP37647 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
