Benutzeranleitung / Produktwartung CLT-A5822 des Produzenten Sanyo
Zur Seite of 34
1 5.8 GHz Cordless Telephone with Caller ID & Visual Call Waiting INSTR UCTION MANU AL CLT-A5830 Dual Handset Models CLT-A5822 CLT-A5832 Important Charge the ha ndset battery for 12 continuous hours prior to first use. The picture depicts dual handset model SANYO Canada Inc.
2 INTRODUCTION ................................................................................................. 4 GETTING ST ARTED ......................................................................................... 5 Checking pa ckage contents .
3 Low battery warning .............................. ..................................................... 1 4 V oice mail indicator ...................................................................................... 1 5 CALLER ID FEA TURES .......
4 Congratulations on your purcha se of this SANYO cordless telephone. Y our SANYO 5.8 GHz cordle ss telephone is a fine-quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronic equipment.
5 Modular jack Y ou need an RJ1 1 type modular phone ja ck. If you do not have a modular ja ck, call your local phone company to find out how to get one installed.
6 Battery setup 1. Remove the battery compartment cover on the handset, insert the battery, plug the cord into the jack (inside the compartment) and replace the cover.
7 T one/pulse setting 1. If you have Pulse (rotary) service, you will need to set the dial mode to pulse. If you have T ouch-T one service, do nothing a s your phone ha s been set to T one prior to shipment. If you do not know which type of service you have, contact your local telephone company.
8 Handset NAMES AND CONTROLS 1. Belt clip 2. REDIAL key 3. Headset ja ck 4. * TONE/EXIT key 5. MEM (memory) key 6. CH (channel)/DEL key 7. Charging conta cts 8. Incoming call/in use LED 9. Earpiece 10. LCD screen 1 1. T ALK key (also used to end a call) 12.
9 Ba se Unit NAMES AND CONTROLS Charger (For CL T -A5822 and CL T -A5832) 1. Handset Cradle 2. Page Key 3. Charge/In Use LED 4. Charge LED 5. Charging conta cts 1 2 3 1 4 5 5 sy5822 10 april.
10 Before using this telephone, 4 initial settings must be completed on the handset: Language, Area code (this is required to use Caller ID service from your tele- phone compa ny), Ringer tone, and T one/Pulse setting. Language setting 1. Make sure the phone is OFF (not in T ALK mode).
11 Resetting to default Y ou ca n reset the phone progra mming to the initial fa ctory default settings. The default settings are: Language English Area Code - - - Ringer T one 1 T one/Pulse Setting T on e 1. Make sure the phone is OFF (not in T ALK mode).
12 Making a call 1. Press T ALK . Note : If ha ndset is in the ba se cradle, re move it from ba se before pressing the T ALK key . 2. Dial the phone number. 3. Press T ALK to end your call. V olume adjustment The VOLUME key adjusts the volume level of the earpiece.
13 Pre-dialing (up to 32 digits) 1. Make sure the phone is OFF (not in T ALK mode). 2. Enter the telephone number. The number is displayed as you enter it. 3. Press T ALK . Note: Pressing *TONE will exit pre-dialing. Changing the pre-dial number 1. Make sure the phone is OFF.
14 * TONE key This feature ena bles Pulse service phone users to acce ss touch-tone services offered by banks, credit card companies, etc. 1. Dial the desired number. 2 . Press *TONE after your call is answered. 3. Follow the voice instructions to complete your desired action.
15 This phone receives and displays incoming call information transmitted by your local phone company, provided you subscribe to Caller ID, and/or Call Waiting services. This information can include the phone number and/or the name, date and time. The phone can store up to 40 calls for later review.
16 Caller ID list The incoming caller information transmitted from the phone company is received by your phone between the first and second ring and stored in the Caller ID list. If you answer a call before the second ring the caller information may not be stored.
17 Storing Caller ID entries in the directory Before storing a caller ID number , make sure the number a ppears in proper digits for your di aling area.
18 Deleting all entries 1. Make sure the phone is OFF (not in T ALK mode). 2 . Use the CID/VOL or keys to display any entry. 3. Press a nd hold CH/DEL , until “DELETE ALL?” shows on screen. 4. Press CH/DEL again to confirm. “NO CALLS” shows on screen.
19 a nd not a pause. Ea ch pause counts a s 1 digit in the dialing sequence. Or you can store redial number in the directory by pressing REDIAL (Note: If the redial number is longer than 24 digits, it cannot be stored into the memory.). 8. Press MEM again to store the number to memory .
20 Chain dialing from the directory Use this feature to ma ke calls that require a sequence of numbers such a s using a calling card for a frequently called long dista nce number . Y ou can di al ea ch part of the sequence from a different entry of the directory.
21 Make sure the telephone is off before you replace the battery. 1. Slide off the battery compartment cover. 2. Disconnect the battery plug from the ja ck in the compartment a nd remove the battery pack. 3. Insert the new battery pack and connect the cord into the jack.
22 HEADSET JACK AND BEL T CLIP Headset connection (Headset not included) For hands free conversation, connect the headset (not included) to the HEADSET jack. The handset earpiece and microphone are disabled when the headset is connected. Press T ALK to answer or pla ce a call while using the hea dset.
23 LCD SCREEN MESSAGES The following indicators show the status of a message or of the phone. BLOCKED NUMBER/ NAME/CALLER TRANSFERRING.. EMPTY ERROR ENTER NAME ENTER TEL NUMBR DELETE ALL? DELETE? END .
24 SOUND SIGNALS A long warbling tone Signals an incoming call Single T one A key is pressed Three short beeps Error tone T wo long beeps Confirmation tone One short beep and one long beep Page signal.
25 • When you press a button from the keypad, you should hear the confirmation "beep" from the handset. Try dialling more slowly and ensure you hear beep sounds. If not try pressing the sa me number again. My handset(s) have static noise • Try re-registering the ha ndset to the main ba se unit a s described in the manual.
26 If you hear 3 short bee ps when you press T ALK , you are out of ra nge. • Does the ba se need to be relocated? • Charge battery. • Make sure ba se is not plugged into a n outlet with another household a pplia nce. Phone beeps • Place ha ndset in ba se f or a minimum of 20 seconds to reset the security code.
27 Can’t hear the ring signal • Check the ringer volume controls; verify that the switch is not set to "Off". • Check that the AC power ada pter is plugged into a working AC power outlet. • Check all telephone cord connections or try a nother wall jack.
28 I a m having diff iculty in pla cing and/or re ceiving calls. • If you experience difficulty with pla cing or receiving calls, a lost security code may be the cause of the problem. When this occurs, the handset can no longer communicate with the ba se.
29 MAXIMIZE BA TTER Y PERFORMANCE The freedom that your cordless telephone can offer is fully dependent on the performa nce of the rechargea ble battery in the handset. T o maximize the battery performance, follow these guidelines: Charge it for a full 12 hours Before initial use of your new battery, charge it for 12 hours continuously.
30 TECHNICAL INFORMA TION REN Number: The Ringer Equivalence Number (REN) assigned to each terminal’s device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The REN number of this phone is located on the bottom of the base unit.
31 TECHNICAL INFORMA TION NOTICE: Privacy of communications may not be ensured when using this telephone. Other devices, including other cordless telephones, may interfere with the operation of this cordless telephone or cause noise during operation. Units without coded access may be accessed by other radio communication systems.
32 Equi pment T echnical Specif ications. This is confirmed by the registration number. The abbreviation, IC, before registration number signifies that registration was performed based on a Declaration of Conformity indicating TECHNICAL INFORMA TION that Industry Canada technical specifications were met.
33 SANYO COMFORT W ARRANTY ORIGINAL RET AIL PURCHASER’S RESPONSIBILITY Y ou, the original retail purcha ser , must present your original, dated bill-of- sale together with this warranty to SANYO Canada Inc. or to an autho- rized SANYO Service Depot when you make a claim under this warranty.
34 At SANYO, fulfilling the needs of our customers is a priority. That’s why we created our SOS customer service progra m that guara ntees satisfa ction. NA TION WIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialists will quickly answer your questions about setup and use of SANYO telephone products.
Ein wichtiger Punkt beim Kauf des Geräts Sanyo CLT-A5822 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sanyo CLT-A5822 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sanyo CLT-A5822 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sanyo CLT-A5822 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sanyo CLT-A5822 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sanyo CLT-A5822 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sanyo CLT-A5822 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sanyo CLT-A5822. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sanyo CLT-A5822 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
