Benutzeranleitung / Produktwartung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726 des Produzenten Samsung
Zur Seite of 59
Owner’ s Instructions COLOR TELEVISION ..............................................................................................................
W arning! Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER VICEABLE P AR TS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside.
S AFETY 1 Thank Y ou for Choosing Samsung Thank you for choosing Samsung! Y our new Samsung TV receiver repr esents the latest in television technology . It has easy-to-use, on-screen menus and closed-captioning capabilities, making this TV one of the best products in its class.
• Protect the power cor d. Power supply cords should be r outed so that they will not be walked on or pinched by items placed on or against them. Pay particular attention to cord placement at plugs, convenience receptacles, and at the point where they exit fr om the unit.
S AFETY 3 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufactur er’ s instructions.
1 C ONTENTS C ONTENTS Chapter 1: Y our New TV . . . . . . . . . . . . . . .1.1 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Familiarizing Y ourself with The TV . . . . . . . . . . . . . . . . .
C ONTENTS 2 C ONTENTS Chapter 4: Special Features . . . . . . . . . . . . 4.1 Customizing Y our Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Setting Up Y our Remote Control to Operate Y our VCR or DVD . . . . . . . . . . . . .
1 .1 C HAPTER O NE : Y OUR N EW TV List of Features Y our TV was designed with the latest technology . This TV is a high-performance unit that includes the following special features: • Easy-to-use .
C HAPTER O NE : Y OUR N EW TV 1 .2 Familiarizing Y ourself with The TV Front Panel Buttons The buttons on the front panel contr ol your TV ’ s basic features, including the on-screen menu. T o use the more advanced features, you must use the r emote control.
1 .3 C HAPTER O NE : Y OUR N EW TV Y OUR N EW TV Side Panel Jacks Y ou can use the Side panel jacks to connect an A/V component that is used only occa- sionally , such as a camcorder or video game. (For information on connecting equipment, see pages 2.
C HAPTER O NE : Y OUR N EW TV 1 .4 Y OUR N EW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously , such as a VCR or a DVD player . Because there are two sets of input jacks, you can connect two dif ferent A/V components (i.
1 .5 C HAPTER O NE : Y OUR N EW TV Remote Control Y ou can use the remote contr ol up to about 23 feet from the TV . When using the r emote, always point it directly at the TV . Y ou can also use your remote contr ol to operate your VCR, DVD and cable box.
C HAPTER O NE : Y OUR N EW TV 1 .6 Remote Control ¯ VCR Controls • REW (Rewind) Press to rewind a tape in your VCR. • STOP Press this button to stop a tape during play , record, rewind or fast forward. If the button is pressed during Full-Automatic play , the function will be can- celled.
1 .7 C HAPTER O NE : Y OUR N EW TV Remote Control Œ POWER T urns the TV on and off. ´ Number buttons Press to select channels directly on the TV . ˇ +100 Press to select channels over 100. For example, to select channel 121, press “ +100, ” then press “ 2 ” and “ 1.
C HAPTER T WO : I NSTALLA TION 2 .1 Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat T win Leads” below . If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on page 2.
2 .2 C HAPTER T WO : I NSTALLA TION Connecting Cable TV T o connect to a cable TV system, follow the instructions below . Cable without a Cable Box ▼ 1 Plug the incoming cable into the VHF/UHF antenna terminal on back of the TV . Because this TV is cable-ready , you do not need a cable box to view unscrambled cable channels.
C HAPTER T WO : I NSTALLA TION 2 .3 I NST ALLA TION Connecting to a Cable Box that Descrambles All Channels ▼ 1 Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or simply , “OUT”.
2 .4 C HAPTER T WO : I NSTALLA TION 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch. 5 Connect another cable between the other OUT terminal on the splitter and the A – IN terminal on the RF (A/B) switch.
C HAPTER T WO : I NSTALLA TION 2 .5 I NST ALLA TION 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV . 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV .
2 .6 C HAPTER T WO : I NSTALLA TION I NST ALLA TION 3 Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV . An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics stor e.
C HAPTER T WO : I NSTALLA TION 2 .7 I NST ALLA TION Connecting a DVD Player (Option) The rear panel jacks on your TV make it easy to connect a DVD player to your TV . Note: For an explanation of Component video, see your DVD player's owner's manual.
2 .8 C HAPTER T WO : I NSTALLA TION I NST ALLA TION 2 Connect an audio cable between the AUDIO OUT- PUT jack on the cam- corder and the AUDIO terminals on the rear of the TV . 3 Connect a video cable between the VIDEO OUT- PUT jack on the cam- corder and the VIDEO ter- minal on the rear of the TV .
C HAPTER T WO : I NSTALLA TION 2 .9 ▼ 3 Replace the cover . Remove the batteries and store them in a cool, dry place if you won ’ t be using the remote contr ol for a long time. The remote contr ol can be used up to about 23 feet from the TV . (Assuming typical TV usage, the bat- teries last for about one year .
O PERA TION 3 .1 C HAPTER T HREE : TV O PERATION Chapter Three O PERA TION 1 Press the POWER button on the remote control. The message “Plug & Play” is displayed. It flickers for a little while and then the “Language” menu is automatically displayed.
O PERA TION C HAPTER T HREE : TV O PERATION 3 .2 4 Make sure that the antenna is connected to the TV . And then press the VOL+ or VOL- button to activate "Auto Program" or press the MENU button to skip. (refer to “Auto program” on page 3.
O PERA TION 3 .3 C HAPTER T HREE : TV O PERATION Viewing the Menus and On-Screen Displays Viewing the Menus Viewing the Display ▼ The on-screen displays disappear after about twelve seconds. When Closed Caption has been set, the icon( ) will appear by press- ing the Display button.
O PERA TION C HAPTER T HREE : TV O PERATION 3 .4 Selecting a Menu Language 3 Press MENU twice to exit. 2 Press VOL + to select the appropriate language: English, Spanish, or French. Plug & Play 1 Press MENU to display the menu. Press CH ▼ three times to select “Function”, then press the VOL + but- ton.
O PERA TION 3 .5 C HAPTER T HREE :T V O PERA TION Memorizing the Channels Y our TV can memorize and store all of the available channels for both “of f-air” (antenna) and cable channels. After the available channels are memorized, use the CH ▲ and CH ▼ buttons to scan through the channels.
O PERA TION C HAPTER T HREE : TV O PERATION 3 .6 3 Press the VOL + button. The TV will begin memorizing all of the available channels. Storing Channels in Memory (Automatic Method) ▼ The TV automatically cycles through all of the available channels and stores them in memory .
O PERA TION 3 .7 C HAPTER T HREE : TV O PERATION Adding and Erasing Channels (Manual Method) 1 Press the MENU button. Press the CH ▼ button twice to select “Channel”, then press the VOL+ but- ton. Labeling : ---- 2 Press the CH ▲ or CH ▼ button to select “Add/Erase”.
O PERA TION C HAPTER T HREE : TV O PERATION 3 .8 Changing Channels Using the Channel Buttons 1 Press the CH ▲ or CH ▼ button to change channels. When you press CH ▲ or CH ▼ , the TV changes channels in sequence. Y ou will see all the channels that the TV has memorized.
O PERA TION 3 .9 C HAPTER T HREE : TV O PERATION Labeling the Channels (TXN2734F / TXN2434F / TXN2730F / TXN2726) Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter , a num- ber , “*”, or a blank.
O PERA TION C HAPTER T HREE : TV O PERATION 3 .10 Setting the Clock 1 Press the MENU button to display the on-screen menu. Press the CH ▼ button three times to select “Function”. Press the VOL + button. Plug & Play 2 Press the CH ▼ button to select “T ime” menu.
O PERA TION 3 .11 C HAPTER T HREE : TV O PERATION 1 Press MENU to display menu. Digital NR : Off Tilt : 0 Dynamic Customizing the Picture Y ou can use the on-screen menus to change the contrast, brightness, tint, color , and sharpness according to personal pr eference.
O PERA TION C HAPTER T HREE : TV O PERATION 3 .12 Using Automatic Picture Settings Y our TV has three automatic picture settings (“Dynamic”, “Standar d”, and “Movie”) that are preset at the factory . Y ou can activate either Dynamic, Standard or Movie by making a selection from the menu.
O PERA TION 3 .13 C HAPTER T HREE : TV O PERATION 2 Press the VOL - or VOL + button repeatedly , until the word “Custom” is selected. (When Custom is select- ed, the words “Adjust” will appear on the screen.) 3 Press the CH ▼ button to select “Adjust”, then press the VOL+ button.
O PERA TION C HAPTER T HREE : TV O PERATION 3 .14 Using Automatic Sound Settings Y our TV has four automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”) that are preset at the factory . Y ou can activate any of them by making a selection from the on-screen menu.
O PERA TION 3 .15 C HAPTER T HREE : TV O PERATION 2 Press the CH ▼ button to select “Melody”, then press the VOL+ or VOL– button to select the “On” or “Off”. 1 Press the MENU button to display the menu. Press the CH ▼ button to select “Sound” menu , then press the VOL+ but- ton.
O PERA TION C HAPTER T HREE : TV O PERATION 3 .16 Viewing a VCR or Camcorder T ape Y ou must select the appropriate mode in or der to view the VCR or Camcorder signal on the TV . 1 Press the MENU button to display the menu. Press the CH ▼ button twice to select “Channel”, then press the VOL+ button.
4 .1 C HAPTER F OUR :S PECIAL F EATURES Chapter Four S PECIAL F EA TURES Customizing Y our Remote Control (TXN2734F / TXN2036F / TXN2730F / TXN2726) Y our TV comes equipped with a “universal” remote contr ol.
C HAPTER F OUR :S PECIAL F EATURES 4 .2 S PECIAL F EA TURES VCR Codes 15,88 24 26,31,32 22,25 11 19 16,18,22,54,55,61 17,62 16,18,22,54,55,61 23 16,21 9,16,17,23,24,55 62,73,76 3,4,5,6,7,8,22,54,85 23.
4 .3 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES Cable Box Codes 15,16 15,16 5 3 4 15,16 20 54 12,13,23,31,32,33,38,44,75,76,77 1 1,12,20,21,42,56 45,51,54 12,13,23,31,32,33,38 44,54,70,73 .
C HAPTER F OUR :S PECIAL F EATURES 4 .4 Fine T uning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Select the appropriate channel. Press the MENU button to display the menu. Press the CH ▼ button twice to select “Channel” menu, then press the VOL+ button.
4 .5 C HAPTER F OUR :S PECIAL F EATURES Changing the Screen Size 1 Press the MENU button to display the menu. Press the VOL + button to select the “Picture” menu. Digital NR : Off Tilt : 0 Dynamic 2 Press the CH ▼ button to select "Size".
C HAPTER F OUR :S PECIAL F EATURES 4 .6 Digital Noise Reduction If the broadcast signal r eceived by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button to display the menu.
4 .7 C HAPTER F OUR :S PECIAL F EATURES T ilt (TXN2734F / TXN2730F) Due to the Earth ’ s magnetic field there may be same minor image tilt depending on the TV ’ s location. When this occurs, follow the steps below . 1 Press the MENU button to display the menu.
C HAPTER F OUR :S PECIAL F EATURES 4 .8 S PECIAL F EA TURES Using the Surf Feature This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be watching a channel when commercials start.
4 .9 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES Setting the On/Off T imer 1 Press the MENU button to display the menu. Press the CH ▼ button three times to select "Function" menu, then press the VOL+ button. Plug & Play 2 Press the CH ▼ button to select "T ime", then press the VOL+ button.
C HAPTER F OUR :S PECIAL F EATURES 4 .10 S PECIAL F EA TURES 5 Press the VOL + button to select “On/Off.” Press the CH ▲ (or CH ▼ ) button to turn the on- timer “On.” (Repeatedly pressing the CH ▲ or CH ▼ button will alter- nate between on and off.
4 .11 C HAPTER F OUR :S PECIAL F EATURES Sound Features Choosing a Multi-Channel Sound (MTS) Soundtrack Depending on the particular program being br oadcast, you can listen to stereo, mono, or a Separate Audio Program. (SAP audio is usually a for eign-language translation.
C HAPTER F OUR :S PECIAL F EATURES 4 .12 S PECIAL F EA TURES Extra sound settings (T urbo Sound, Surround, or Auto V olume ) • T urbo Sound T urbo sound suitably emphasizes both higher and lower bands of sound (and includes other effects). • Surround “ Surround ” converts a monaural sound signal into two identical left and right channels.
4 .13 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES ▼ Misspellings and unusual characters sometimes occur during closed caption transmissions, especial- ly those of live events. There may be a small delay before captions appear when you change channels.
C HAPTER F OUR :S PECIAL F EATURES 4 .14 S PECIAL F EA TURES Using the V -Chip The V -Chip feature automatically locks out pr ogramming that is deemed inappropriate for children. The user must first enter a PIN (personal ID number) before any of the V -Chip restrictions can be set up or changed.
4 .15 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES How to Set up Restrictions Using the “TV guidelines” First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guide- lines or the MP AA rating.
C HAPTER F OUR :S PECIAL F EATURES 4 .16 S PECIAL F EA TURES 2 Press the CH ▼ button three times to select the “V-chip” menu. Press the VOL+ button. The “Enter pin” screen will appear . Enter your 4- digit PIN number . 3 The “V-chip” screen will appear .
4 .17 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES How to Set up Restrictions Using the MP AA Ratings: G, PG, PG-13, R, NC-17, X The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies.
C HAPTER F OUR :S PECIAL F EATURES 4 .18 How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: “Excessive rating”.
5 .1 C HAPTER F IVE : T ROUBLESHOOTING If the TV seems to have a problem, first try this list of possible pr oblems and solutions. If none of these troubleshooting tips apply , then call your nearest service center . Identifying Problems Chapter Five T ROUBLESHOOTING Problem Possible Solution Poor picture T ry another channel.
A PPENDIX A .1 Cleaning and Maintaining Y our TV W ith proper care, your TV unit will give you many years of service. Please follow these guidelines to get the maximum performance from your TV . Placement • Do not place the TV near extremely hot, cold, humid or dusty places.
Ein wichtiger Punkt beim Kauf des Geräts Samsung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung TXN2734F, TXN2434F, TXN2034F, TXN2036F, TXN2730F, TXN2030F, TXM2726 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
