Benutzeranleitung / Produktwartung TSH542A des Produzenten Samsung
Zur Seite of 24
Main Page Safety Precautions Safety Precautions During Installation During Operating Others Features Exterior System Requirements Features Installing DVD R/RW Drive and Connecting Cables Installing Dr.
This symbol indicates explanations about extr emely dangerous matters. If users ignore this symbol and handle the device the wrong way, serious injury or death could result. This symbol indicates explanati ons about dangerous matters. If users ignore this symbol and handle the device the wrong way, damage to home or property could result.
Do not drop the drive, and protect it from severe shocks. - It can damage the drive or cause it to malfunction. Do not place the drive in direct sunlight.
Handle with caution to prevent damage from external shock. Do not drop the drive, and protect it from severe shocks. - It can damage the drive or cause it to malfunction. Do not move the drive while in op eration and do not attempt to open the disc tray by force.
Never allow food particles or foreign substances to enter the drive casing. To protect against the risk of fire, do not spill such liquids as alcohol and benzene on the drive. Do not disassemble, attempt to repair or modify the device without express approval as directed in the manual.
1. Emergency Hole 2. On/Off Lamp 3. Open/Close Button 4. Disc Tray 1. Sound Output Port 2. Interface Port 3. Master/Slave Selection Port 4. Power Port DVD R/RW Drive 40-pin interface cable audio cable four screws to install the drive drive installation instruction sheets software programs (software: Nero Express 6.
You need to have an IBM-compatible PC with the following specifications. Item Description OS Microsoft Windows 98 SE/2000/Me/XP(SP 1.0 or higher) CPU 700 MHz or greater IBM-compatible PC (Recommendation: Pentium4 2.
Versatile Multimedia Features DVD-R : Read / Write DVD-RW : Read / Write / Rewrite allowed DVD+R : Read / Write DVD+RW : Read / Write / Rewrite allowed DVD-ROM : Read CD-R : Read / Write CD-RW : Read .
1. Turn the PC off. 2. Open the cover as shown in the picture. 3. If necessary, attach the support devices on both sides of the drive - The support devices are PC accessories.
Connecting the Power Cable Hold the power cable (with four pins) in the power box within the computer with the cutoff edges( ) facing up and connect it to the power po rt in the back of the DVD R/RW Drive A - Cutoff edges 1 +5V DC 2 Ground 3 Ground 4 +12V DC Improperly connected power cable may cause malfunction.
a : Slave Drive (Select the SL jumper) b : HDD c : MotherBoard When you use two E-IDE cables Set the jumper to MA (Master) in the Master/Sla ve port in the back of the DVD R/RW Drive.
Connecting the Jumper to the Master/Slave Port Connect the jumper to the slot in the back of the DVD R/RW Drive. When you connect the jumper to MA (Master), the drive runs as the master, and when you connect it to SL (Slave), the drive runs as the slave.
1. Go to http://samsung-ODD.com 2. Click Firmware on the menu bar (i n the upper right-hand corner). 3. Click "Download Live Update Full Version." (Click Firmware Downloads to manually download Firm ware; select a drive model from the list and click to start downloading.
Confirming Using [Device Manager] Windows 98/Me 1. Click [Start] - [Settings] - [Control Panel] - [System] 2. Click on the [Device Manager] tab in the System Properties window. 3. Click CDROM drive in the Device Manager window. 1 in the picture in the left appear if the driver is installed properly.
Automatic Setup The device driver is located in the 'Dos_driver' folder of the CD which is provided with the DVD R/RW Drive 1. Insert the CD provided with th e DVD R/RW Drive and open the 'Dos_driver' folder. 2. Run the CDSETUP.EXE file in the 'Dos_driver' folder.
When the On/Off light is orange, do not turn the PC off or remove the DVD R/RW Drive as it may cause damage in the drive. How to Use a Horizontally Installed Drive You can use 3.15 Inch or 4.72 Inch (8cm or 12cm) discs. The drive cannot read the disc properly if any part of the disc is place outside the tray guiding line.
The DVD R/RW Drive allows writing DVD RW discs using Nero Express and enables "packet writing" (high-speed recording) using InCD. The drive also allows writing DVD R discs using Nero Express.
Click [Start] - [Setting] - [Control Panel] - [Add/Remove Programs] and a window as shown below appears. [ Windows 98 / Me ] Click the [Add/Remove] button to remove the program. [ Windows 2000 ] Click the [Add/Remove] button to remove the program. [ Windows XP ] Click the [Add/Remove] button to remove the program.
Turn the PC off and pull out the drive. Remove any foreign objects from the surface of the drive using soft cloth. - Do not use benzene, paint thinner, or any other solvents. - Cleaning the interior of the uni t with such things as a cotton swab may cause failure or loss of functionality.
This part of the manual is to prevent damages or data loss. Read carefully and us e the device properly. Do not place it under the direct sunlight. Place it so that it sits on its side on a flat surface. Do not scratch or place a label on the disc. Handle the disc with caution to pr event damage from external shock.
This part of the manual is to prevent damages or data loss. Read carefully and us e the device properly. Do not touch the surface of the disc. Place your fingers on the edge of the disc to hold. Clean the disc lightly with soft cotton clot h, starting from the center and move to the edge of the disc.
On/Off Lamp Meaning Disc Lead-In Green: Blinks every 0.3 seconds. Writing Green: Blinks every 0.3 seconds. Reading Green: Blinks every 0.3 seconds. Audio Playback [Analog Mode] Green: Blinks every 0.3 seconds. Audio Playback [Digital Mode] Green: Blinks every 0.
Problem Meaning / Solution The tray won't open. See if the PC on. Make sure the power cable within the PC is connected properly. If the tray still won't open with th e power on, turn the power off and insert a pin(paper clip) into the emergency hole to open.
Category TS-H542A DVD R/RW Drive DISC Usable Discs DVD : DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM, DVD-Video CD : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G) CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD CD-I, CD-I Bridge (Photo-CD, Video-CD), Multisession CD (Photo-CD, CD-EXTRA, Portforio) Disc Diameter 4.
Ein wichtiger Punkt beim Kauf des Geräts Samsung TSH542A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung TSH542A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung TSH542A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung TSH542A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung TSH542A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung TSH542A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung TSH542A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung TSH542A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung TSH542A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
