Benutzeranleitung / Produktwartung SDR4100 des Produzenten Samsung
Zur Seite of 135
8 CHANNEL/ 16 CHANNEL DVR User Manual SDS-P5101/SDS-P5100/SDS-P4080.
Copyright ©2 012 Sam su ng T ec hwi n Co ., Ltd . Al l r ig ht s re s er ved . T rademark is the re gis tere d lo go of S am sung Techw in C o., Ltd .
English _3 ! OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS Read these operating instructions carefully befor e using the unit. Follow all the safety instructions listed below . Keep these operating instructions handy for future r eference. 1) Read these instructions.
4_ overview over view CAUTION RISK OF ELECTRIC SHOCK. DO NO T OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE P AR TS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is pr esent within this unit.
English _5 ! OVERVIEW BEFORE ST ART This user manual provides Information for using the DVR such as brief intr oduction, part names, functions, connection to other equipment, menu setup, etc. Y ou have to keep in mind the following notices : • SAMSUNG retains the copyright on this manual.
6_ overview over view CONTENTS OVERVIEW 3 3 Important Safety Instructions 5 Before Start 6 Contents 8 Features 11 Part Names and Functions (Front) 12 Part Names and Functions (Rear) 13 Remote Control .
English _7 ! OVERVIEW SEARCH & PLA Y 75 75 Search 78 Playback WEB VIEWER 80 80 Introducing W eb Viewer 81 Connecting Web Viewer (Mac) 82 Using Live Viewer (Mac) 83 Connecting Web Viewer (Windows) .
8_ overview over view FEA TURES The DVR employs H.264 video encoding for 8 or 16 channel inputs and G.711 audio encoding for 8 or 16 channels while simultaneously supports hard disc r ecording and playback. These DVRs also supports network connectivity , providing r emote monitoring from a r emote PC transferring video and audio data.
English _9 ! OVER VIEW Package Contents Please unwrap the pr oduct, and place the pr oduct on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit.
10_ overview over view DVR (1SET) Ada pter (1EA) / Power Cable (1EA) Mouse (1EA) Remote Control (1EA) / Ba ttery (2EA) SDC-5340BC (8SET) Camera Cable (8EA) Camera Power Cable (1EA) Network Cable (1EA).
English _11 ! OVERVIEW P ART NAMES AND FUNCTIONS (FRONT) SDR-5100/4100 Part Names Functions a USB Port Connects the USB devices. b Remote Control Receiver Input the remote control signal. c LED Indicator POWER : Displays the power ON/OFF status. ALARM : Lights on when an event occurs.
12_ overview over view P ART NAMES AND FUNCTIONS (REAR) SDR-4100 SDR-5100 Part Names Functions a AUDIO IN Input ports (RCA jack) for the audio signal. b VIDEO IN Input port for the composite video signal. c RS-485 Used to establish RS-485 communications.
English _13 ! OVERVIEW REMOTE CONTROL SEARCH Displays the search menu. POWER Displays the Exit pop up screen. NUMBER [0~+10] Used as the numeric input keys, or displays a single channel. T/W Zooms in or out. BACKUP Displays the Backup Menu. MODE Changes the screen mode.
14_ overview over view Changing the Remote Control ID 1. Press the ID button of the r emote control and check the ID displayed on the DVR screen. The factory default ID of the remote contr ol is 00. 2. Enter 2 digits of your selection in order , while pressing the system [ ID ] button.
English _15 ! CONNECTING WITH OTHER DEVICE connecting with other device One Y ear: 24HR X 365 DA Y =8,760 HR T emperature Unit: ºC Life (Unit: HOURS) INST ALLA TION Please take note of the followings before using this product. • Do not use the product outdoor .
16_ connecting with other device connecting with other device CONNECTING THE VIDEO, AUDIO AND MONITOR CONNECTING THE USB 1. By factory default, a USB port is provided for external connection. 2. Y ou can connect a USB HDD, USB memory or mouse to the USB port.
English _17 ! CONNECTING WITH OTHER DEVICE CONNECTING THE CAMERA (SDC-5340BC) Equipped with the IR LED and the illumination sensor , enables you to monitor at night as well as in daytime. The camera is suitable for both internal and exter nal use. ` Please make sure not to fully expose the camera to rain.
18_ connecting with other device connecting with other device Connecting with DVR ` The following figures are based on Model SDR-5100. Installing the camera The camera can be installed on the wall, ceiling, shelf or a desired position using the pr ovided bracket.
English _19 ! CONNECTING WITH OTHER DEVICE CONNECTING THE RS-485 DEVICE Connect the rear [ RS-485 +, – ] port to the PTZ camera or system keyboar d. J ` Y ou can connect and control the PTZ camera which supports the RS-485 communication. ` Check if the RS-485 device is compatible with the product first.
20_ connecting with other device connecting with other device Connecting to the Network using the router Connecting to Network through ADSL CONSOLE AUDIO IN CH1 CH2 VGA OUT DC 12V NETWORK AUDIO IN VID.
English _21 ! LIVE live GETTING ST ARTED Starting the system 1. Connect the power cable of the DVR to the wall outlet. M ` It takes about 10 seconds to display the start screen after booting. 2. Y ou will see the initialization screen. The initialization process will last about 1 minute.
22_ live live Login T o access a DVR or restricted menu, you should have logged in to the DVR. 1. In live mode, right-click any area of the scr een. Y ou will see the context sensitive menu as in the right figure. 2. Click < Login >. The login dialog appears.
English _23 ! LIVE LIVE SCREEN CONFIGURA TION Icons on the Live Screen Y ou can check the status or operation of the DVR with the icons on the live screen. Name Description a Current Date , T ime Displays the current time and date. b Login Information When you are logged in, the “ LOG ON ” icon will be displayed.
24_ live live Name Description f Camera Name/ Channel Displays the camera name and the changed channel, if any . g Camera Operation Displays the resolution of the recording screen. (Page 53 ) Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.
English _25 ! LIVE Split Mode Menu The context sensitive menu in split mode differs, depending on the login/logout status. Menu Description a Scene Mode Refer to “ Live Mode ”. (Page28) b Audio On/Off Refer to “ Audio On/Off ”. (Page 31 ) c Freeze Refer to “ Freeze ”.
26_ live live Single Mode Menu The single mode menu is available only in Single Mode. The context sensitive menu for the One Channel mode, in Split mode is differ ent from that of the Single mode. Menu Description a Full Screen Select and click a desired channel in Split mode to switch to the full screen of the selected channel.
English _27 ! LIVE View the Launcher Menu The Launcher menu appears on the bottom of the live screen. 1. In Live mode, right-click to display the context menu and select < Show Launcher >. 2. Move the cursor to the bottom and click a desired item in the Launcher menu.
28_ live live LIVE MODE SDR-5100 display Live images from 16 channels in a total of 8 layout of split scr eens. Switching the screen mode T o switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in the context menu.
English _29 ! LIVE M ` In Single mode, If you ha ve set < SEQ-Dwell Time > in “ Setting the Device > Camera ”, Auto Sequence will be conducted at the set interval. (Page 45 ) ` In a split mode, If you have set < Multi CH SEQ Time > in “ Setting the Device > Monitor ”, Auto Sequence will be conducted at the set interval.
30_ live live Channel Setting Y ou can display the channel in a desired ar ea of a split screen. 1. Place the cursor over the camera name of each channel to display the < % > key to the right on the screen. 2. Click a camera name to display a channel list where you can select a dif ferent channel.
English _31 ! LIVE ZOOM This is available only in Single Live mode. In Single mode, select a desired ar ea and use the Zoom function to enlarge it twice. 1. Select < Zoom In > in the right-click menu. Press the [ ZOOM ] button on the r emote control, or simply click < > in the launcher menu.
32_ live live EVENT MONITORING This will display the channel in sync with a specific event (Motion/Video Loss) if it occurs. In “ Monitor > Event Display ”, set the event monitoring to ON/OFF and specify the event display time. (Page 50 ) • If multiple events occur simultaneously , the screen will switch to a split mode.
English _33 ! MAIN MENU Y ou can setup the system properties, devices, and options for recording, event, backup and network. SYSTEM SETUP Y ou can setup Date/Time/Language, Permission, System Properties and Log.
34_ main menu main menu • Date : Sets the date that will appear on the screen. Y ou can select the date format. • Time : Sets the time and its format that will appear on the screen. Select either one from < 24 Hours, 12 Hours (AM/PM) >.
English _35 ! MAIN MENU Setting Holiday Y ou can set specific dates to Holidays according to your pr eferences. Holidays are applied to < Recor ding Schedule > and < Alarm Schedule > too.
36_ main menu main menu Permission Management Y ou can set permissions of each user over the DVR's specific function and settings. Setting the Administrator Y ou can set and change Administrator’ s ID and password. The administrator can use and set all menu items and functions.
English _37 ! MAIN MENU Setting the Group Y ou can create user gr oups and setup permissions for those user groups. Y ou can register a user for each gr oup in < User >.
38_ main menu main menu T o restrict the user permissions If the admin restricts all permissions of an added gr oup, the users belonging to that group can access only the default minimum menus and can change the user’ s own password only . 1. Start the DVR.
English _39 ! MAIN MENU Setting the User Users can be added only if a group was cr eated in < Group > menu. Using the mouse may help make setup easier . 1. Use the up/down buttons ( $% ) in < System > window to move to < Permission Management >, and press [ ENTER ] button.
40_ main menu main menu Setting Permissions Y ou can set restricted access for all general users. Items with restrictions will r equire logging in for use. Using the mouse may help make setup easier . 1. Use the up/down buttons ( $% ) in < System > window to move to < Permission Management >, and press [ ENTER ] button.
English _41 ! MAIN MENU System Management Y ou can check the system version, update to a newer version, as well as data backup and initialization. Checking the System Information Y ou can check the current system version, br oadcasting system, MAC address.
42_ main menu main menu 5. Press < OK > in the “ System Upgrade ” window . ` While updating, it shows the progress. • Updating progr esses with 3 steps as shown in the figure. 6. When the updating is done, it automatically restarts. Do not turn the power off until it finishes restarting.
English _43 ! MAIN MENU Settings Y ou can copy and import the DVR settings by using a storage media. Using the mouse may help make setup easier . 1. Use the up/down buttons ( $% ) in < System > window to move to < System Management >, and press [ ENTER ] button.
44_ main menu main menu Event Log Event log shows recor ded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help make setup easier . 1. Use the up/down buttons ( $% ) in < System > window to move to < Log Information >, and press [ ENTER ] button.
English _45 ! MAIN MENU SETTING THE DEVICE Y ou can configure the settings of: Camera, Storage Device, Remote Device and Monitor . Camera Setting the Camera Y ou can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help make setup easier .
46_ main menu main menu • Screen Setup : The video appear ed on the screen may vary depending on the channel’ s camera, configure the DVR display to your prefer ences. Select a channel and adjust the < (Brightness) >, < (Contrast) >, and < (Color) > of the selected channel.
English _47 ! MAIN MENU Setting the PTZ T o use Camera’ s PTZ functions, ID and protocols of each camera and DVR should be matched. For other settings, refer to the “ Remote Devices ” settings. (Page 49 ) Using the mouse may help make setup easier .
48_ main menu main menu Formatting Y ou can format a storage device. Using the mouse may help make setup easier . 1. Use the up/down buttons ( $% ) in < Device > window to move to < Storage Device >, and press [ ENTER ] button. 2. Select < Format >.
English _49 ! MAIN MENU HDD Alarm Y ou can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration. Using the mouse may help make setup easier . 1. Use the up/down buttons ( $% ) in < Device > window to move to < Storage Device >, and press [ ENTER ] button.
50_ main menu main menu Monitor Y ou can configure information to be displayed. Setting the Monitor Using the mouse may help make setup easier . 1. Use the up/down buttons ( $% ) in < Device > window to move to < Monitor >, and press [ ENTER ] button.
English _51 ! MAIN MENU SETTING THE RECORDING Y ou can setup scheduled recor ding, event recording and other r ecording r elated settings. Recording Schedule Make your reservation on a date and time to schedule the r ecording on specified time. Using the mouse may help make setup easier .
52_ main menu main menu Recording Color T ags Color Function Description White No Recording No schedule / event recording Orange Continuous Scheduled recor ding only Blue Event Event recor ding only G.
English _53 ! MAIN MENU REC Quality & Resolution Y ou can set resolution, FPS and quality of r ecordings by channel, and by recor ding type of standard / event. Setting Standard Recor ding Properties Y ou can set each channel’ s resolution, quality and fps for normal recor dings.
54_ main menu main menu Record Option Y ou can set the recor ding to stop or overwrite when the HDD is full. Using the mouse may help make setup easier . 1. Use the up/down buttons ( $% ) in < Record > window to move to < Record Option >, and pr ess [ ENTER ] button.
English _55 ! MAIN MENU SETTING THE EVENT Y ou can set recor ding options for motion, and video loss event. Motion Detection Y ou can set target detection region and motion, as well as the alarm signal output. When the motion detection region is set, it detects motion within the ar ea.
56_ main menu main menu Video Loss Detection Y ou can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help make setup easier . 1. Use the up/down buttons ( $% ) in < Event > window to move to < Video Loss Detection >, and press [ ENTER ] button.
English _57 ! MAIN MENU BACKUP Y ou can check the backup device and set the backup schedule by channel or by time. The product only supports external HDD of USB memory and USB type. (Page 112 ) Setting the Backup Y ou can backup the desired data to a connected device.
58_ main menu main menu 5. When the backup setup is done, press < OK >. ` If no available device is recognized for backup, < OK > button is not activated. J ` The application may slow down during the backup. ` Y ou can switch to the menu screen during the backup in operation, but playback of data is not available.
English _59 ! MAIN MENU • IP , Gateway , Subnet Mask, and DNS - For < Static IP > : Y ou can directly input IP address, Gateway , Subnet Mask and DNS. - For < Dynamic IP > : IP address, Gateway , and Subnet Mask are set automatically .
60_ main menu main menu Notification J ` In a multi-browser environment, the web port should be set to 80 (priva te port). Select one between 4505 and 4530 for RTSP • Network Overview 1 6 2 7 3 8.
English _61 ! MAIN MENU • 1st Set Port Forwarding Setting Port Forwarding is 4520~4524 (4520, 4521, 4522, 4523, 4524) SDR-5100 192. 168. 1. 200 TCP 4520 4520 Port Forwarding is 80 SDR-5100 192. 168. 1. 200 TCP 80 80 • 2nd Set Port Forwarding Setting Port Forwarding is 4525~4529 (4525, 4526, 4527, 4528, 4529) SDR-5100 192.
62_ main menu main menu Connecting and Setting the Network Networking may differ fr om the connection method, check your environment before setting the connection mode. When no router is used • Static IP mode - Inter net connection : Static IP ADSL, leased line, and LAN environments allows connection between the DVR and remote user .
English _63 ! MAIN MENU When a router is used J ` T o avoid IP address conflict with the DVR's sta tic IP , check followings : • Setting the DVR with a static IP - Internet connection : Y ou can connect the DVR to a router which is connected to an ADSL/Cable modem or a router in a Local Ar ea Network (LAN) environment.
64_ main menu main menu • Setting Router’ s Port Forwarding 1. Set the protocol to < TCP >. 2. External Port Range : Enter the TCP Port set in the < Port(TCP) > in < Pr otocol > menu of the connected DVR. If more than one DVRs ar e connected to the router , the TCP port can be differ ent.
English _65 ! MAIN MENU Click < OK > for updating your router IP addr ess. T ype your router Username & Password. If you haven’t changed them, skip this pr ocedure, for it provides default value. 4. Click <( 4)Do it now > in Check List for choosing the ports.
66_ main menu main menu 5. After checking if the list is right, click < (5)Do it now > for updating your router . DDNS Y ou can set the DDNS site for a remote user’ s network connection.
English _67 ! MAIN MENU DDNS Setting DDNS is a short form of Dynamic Domain Naming System. DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www .google.com) to an IP address consisting of numbers (64.
68_ main menu main menu 4. After registration, you can see the list as below . 5. Select < iPOLiS > and fill Server Name out with your registration information. 6. Y ou can see < ST A TUS > changed to < ON > in 10 minutes, if all the network settings are right.
English _69 ! MAIN MENU Mailing Service Y ou can send an e-mail to a DVR-register ed user at a specific time interval, or if an event occurs. M ` If an event occurs with a channel where the camera’ .
70_ main menu main menu Event Setting Y ou can set the interval and type of the event that will be sent to the user . Using the mouse may help make setup easier . 1. In the < Network > setting window , press the up/down ( $% ) button to move to < Mailing Service > and press the [ ENTER ] button.
English _71 ! MAIN MENU Recipient Setting Y ou can add/remove a r ecipient(s) to/from the specified group and edit the gr oup if necessary . Using the mouse may help make setup easier . 1. In the < Network > setting window , press the up/down ( $% ) button to move to < Mailing Service > and press the [ ENTER ] button.
72_ main menu main menu CONTROLLING A PTZ DEVICE The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your pr eference. PTZ Device The PTZ device can be activated only if a channel in connection with the PTZ camera is selected.
English _73 ! MAIN MENU Using the PTZ camera Y ou can use one camera to perform all functions of P AN, TIL T and ZOOM for monitoring multiple places and set the preset to your pr eference in a desired mode.
74_ main menu main menu Preset Setting A preset is a set of specific target points of a PTZ camera, and up to 127 pr esets per a camera can be stored. 1. In PTZ Control mode, use the dir ection buttons to adjust the camera in a desired direction. 2. Select the < Save > key .
English _75 ! SEARCH & PLA Y SEARCH Y ou can perform the search for r ecorded data by the time or by the search criteria such as an event. Y ou can access the < Search > menu dir ectly in Live mode. 1. In Live mode, right-click any area of the scr een.
76_ search & play search & play • Zoom In : The map enlarges in detail. It will switch in the sequence of 24 hours - 16 hours - 8 hours - 4 hours. • Zoom Out : The map will switch in the reverse or der of the detailed mode above. It will switch in the sequence of 4 hours - 8 hours - 16 hours - 24 hours.
English _77 ! SEARCH & PLA Y Backup Search Searches for backup data in the connected backup device. Only data in the format of DVR is included in the search. Refer to < T ype > in “ Backup > Setting the Backup ”. (Page 57 ) Using the mouse may help make setup easier .
78_ search & play search & play PLA YBACK Play Y ou can play data stored in the HDD and backup a desir ed portion of the data. Using the mouse may help make setup easier . 1. In Live mode, click < Play > in the right-click menu or < > in the launcher menu, or press the Play button on the remote contr ol.
English _79 ! SEARCH & PLA Y Using the Playback Button Part Names Functions Play Timeline Indicates the current playback point, and can be used to move. b Skip Backward Moves backward by unit time. c Backward Fast Play Used for quick backward playback.
80_ W eb Viewer W eb Viewer INTRODUCING WEB VIEWER What is Web Viewer? Web Viewer allows r emote access to your DVRs. Y ou have access to live video, archived video etc. Product Featur es • Remote access from a standar d browser • Supports 1, 4, 9, 16 camera viewing formats (maximum of 16 cameras in the list).
! WEB VIEWER CONNECTING WEB VIEWER (MAC) ❖ Safari on MAC. If you want to use DVR Web Viewer with Safari Br owser on a Mac, please refer to this user guide and install Multi Viewer with firmware upgrade if necessary . • Brower versions available: Safari 5.
82_ W eb Viewer W eb Viewer • If Microsoft Silverlight plug-in is alr eady installed 1. Use a web browser to connect to the DVR. 2. If Silverlight plug-in is already installed, you will see the screen as shown. 3. If this is the case, perform Step 3 [ TCP port & Web Viewer port settings ] below .
! WEB VIEWER CONNECTING WEB VIEWER (WINDOWS) 1. Open your web browser and type the IP addr ess or URL of DVR into the URL address box. M T he basic URL of the DVR is as following in case of MAC address : ` http://www .samsung ipolis.com/User ID ` Y ou can also use registered URL which setups up in the Setup menu of your DVR.
84_ W eb Viewer W eb Viewer USING LIVE VIEWER (WINDOWS) The Live Viewer screen consists of following : The Live Viewer screen consists of following : a This displays the IP addr ess and the model name of the connected DVR. b These menus consist of < LIVE >, < SEARCH >, < SETUP >, < ABOUT >.
! WEB VIEWER OSD Information Display a The channel number , video size, and IP address of the connected DVR are displayed. b This icon will appear if the audio signal is currently being output. c The current date and time will be displayed accor ding to the selected time information display setting < DVR Time > or < PC Time >.
86_ W eb Viewer W eb Viewer Connected DVR This displays the IP address and the status of the connecting DVR. M ` Connection failure message No Response : Appears when the DVR does not respond. Access Denied : Appears when the maximum number of users is exceeded.
! WEB VIEWER • NEXT : When this button is clicked, the next scr een appears. In SINGLE MODE, the channel numbers are sequentially switched fr om 1 to 16. In QUAD MODE, the screens ar e changed like 1st 4 channels (1~4) 2nd 4 channels (5~8) 3r d 4 channels (9~12) 4th 4 channels (13~16).
88_ W eb Viewer W eb Viewer • RECORD : Saves the current image on the scr een and saves it as a avi video file. M ` T o record it, it is required at least 1GB of available space. ` The default saving path is “C:Program FilesSamsungDVR Web ViewerVideoClipLive”.
! WEB VIEWER • MENU : Appears the camera menu screen. • Preset : Moves the lens dir ection to a preset direction. 1. If you click a preset, the camera moves to the selected preset's position. 2. Y ou can delete the selected preset or all pr esets.
90_ W eb Viewer W eb Viewer USING SEARCH VIEWER The Search Viewer scr een consists of following : a This displays the IP addr ess and the model name of the connected DVR. b These menus consist of < LIVE >, < SEARCH >, < SETUP >, < ABOUT >.
! WEB VIEWER Split-Screen Y ou can change the split mode by clicking each number icon. • Click < > button. The screen displays the selected camera connected to the DVR in “ SINGLE MODE ”. • Click < > button. The screen displays the selected camera connected to the DVR in “ QUAD MODE ”.
92_ W eb Viewer W eb Viewer Saving The Live Screen On The PC • CAPTURE : Saves the current scr een into a BMP or JPEG file. M ` The default saving path is “C:Program FilesSamsungDVR Web ViewerSnapShotSearch”. T o change the saving path, click < SA VE P A TH ( )> button and then select the path you want.
! WEB VIEWER Searching The Recor ded V ideo In The Calendar If the video data has been recor ded on a date, the date is distinguished in green. If you click the date, the r ecorded video information is displayed in the time line. When you click < T oday >, it will be synchronized with the system time (date) of the current PC.
94_ W eb Viewer W eb Viewer Controlling Playback a Fast Backwar d : Reverse-plays faster(2x~64x). b Reverse Play : Performs Reverse Play . c Play : Performs playback. d Fast Forwar d : Plays faster(2x~64x). e Go to First : Moves the beginning time of recor ded video in the time line.
! WEB VIEWER • Time Synchronization Setup Set the time synchronization. • Display Date Format : Set the date type. Time : Select a time format to display on the screen. • DST (Daylight Saving Time) DST is displayed an hour ahead of the standard time of the time zone.
96_ W eb Viewer W eb Viewer • Group Users are classified into gr oups and the permission can be set according to the gr oup. ` First of all, add a g roup. • User Y ou can add, change or remove a user or users. • Setup Y ou can set the user permission.
! WEB VIEWER Device Y ou can check a list of devices that are connected to the DVR and configur e the necessary settings. Click < Device > in the menu screen. For more information, r efer to “ Setting the Device ”. (Page 45 ) Camera • Camera Y ou can configure the settings of the camera that is connected to the DVR.
98_ W eb Viewer W eb Viewer Storage Device Y ou can check and change the settings of the storage device. • Device Y ou will see a list of storage devices that are connected to the DVR. Y ou can check the type, used/total, usage and status of the device.
! WEB VIEWER Monitor • Monitor Y ou can configure the monitoring scr een settings and set the output system. • Mode Y ou can switch between live mode and play mode.
100_ W eb Viewer W eb Viewer Record For more information, r efer to “ Setting the Recording ”. (Page 51 ) Recording Schedule If you set a recor ding schedule for a specific date and time, the recor ding will start at that specific time. - Apply to All CH : Click < Apply to All CH > to display the confirmation window .
! WEB VIEWER REC Quality & Resolution • Standard/Event Y ou can set the resolution, frame rate and r ecording quality for each channel. Record Option Y ou can set the Disk End Mode. Event For more information, r efer to “ Setting the Event ”.
102_ W eb Viewer W eb Viewer Video Loss Detection Y ou can set the alarm output time if a video loss occurs. Alarm Schedule Y ou can schedule the alarm output according to the day of the week and the time. The default setting is Event Sync, which activates the alarm only if an event occurs.
! WEB VIEWER Network For more information, r efer to “ Network Configuration ”. (Page 58 ) Connection A remote user can access the DVR via the network to check the curr ent mode and the IP address. • Connection Y ou can set the network connection route.
104_ W eb Viewer W eb Viewer Live T ransfer A remote user can set the images of the DVR. • Live T ransfer A remote user can set the image r esolution of the transferred data. Mailing Service Y ou can specify the SMTP server that sends a mail if an event occurs and set the recipient gr oup and users.
! WEB VIEWER • Group Y ou can add a group to r eceive the mail if an event occurs and set the permission to receive the event mail for each group. • Recipient Y ou can add a user or users who will receive the mail. ABOUT Click < ABOUT >.
106_ W eb Viewer W eb Viewer MOBILE VIEWER What is Mobile Viewer? iPOLIS mobile is smartphone application that enables you to connect to DVR (Digital Video Recorder) remotely and contr ol the video playback and PTZ operations (if configured) in real time.
! WEB VIEWER 4. Register the DVR to the iPOLiS mobile. J Name : Crea te a name for the DVR you are adding Model : Select the DVR model Host : If you are using Samsung iPolis DDNS, enter the host DDNS Host Address you wrote down earlier . It should be www .
108_ backup viewer backup viewer SEC BACKUP VIEWER Y ou can play a file that is backed up in the format of SEC. Backup in the format of SEC will involve in generating two files: one for the backup data and one for the viewer . If you run the backup file viewer , the backup data file will be automatically played.
! BACKUP VIEWER Name Description a Audio / A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated. Y ou can adjust the volume level from 0 to 100. b Screen Printout Saves the current screen as an image file.
110_ backup viewer backup viewer Name Description h Play Displays the next frame. This is availa ble only if the playback is stopped. A toggle button. Press it once to start playing the video and switch the button mode to 'Pause', and press it a gain to switch the button mode to Play and stop playing temporarily .
! APPENDIX appendix PRODUCT SPECIFICA TION (CAMERA) ❖ SDC-5340BC Item Details SDC-5340BCN SDC-5340BCP Electrical Input Voltage DC 12V Power Consumption 3W Video Imaging Device 1/3'' CMOS T otal Pixels 720 x 480 Scanning System Interlace Synchronization Internal Frequency H: 15,734 Hz, V: 59.
112_ appendix appendix Product SPecifica tion(dvr) ❖ Sdr-4100 Item Details SDR-4100 Video Inputs 8 composite video 0.5-1 Vpp, 75 ohm Resolution 704x480 NTSC, 704x576 PAL Live Frame rate 240fps NTSC,.
! aPPendix Item Details SDR-4100 Storage Internal HDD 500GB SA T A HDD External HDD – DVD Writer (Back-up) – USB (Back-up) 2 USB Ports File Format (Back-up) BU(DVR Player), SEC(Include Player) Sec.
114_ appendix appendix Item Details SDR-4100 Mechanical Dimension (W X H X D) W360 X H44 X D160mm (14.17 X 1.73 X 6.3 inch) Weight (With hard disks) 1.
! aPPendix ❖ Sdr-5100 Item Details SDR-5100 Video Inputs 16 composite video 0.5-1 Vpp, 75 ohm Resolution 704x480 NTSC, 704x576 PAL Live Frame rate 480fps NTSC, 400fps P AL Resolution 704x480 NTSC, 704x576 PAL Multi Screen display 1, 4 , 6 , 8 , 9 , 1 3 , 16, PIP , Sequence Performance OS Embedded Linux Recording Compression H.
116_ appendix appendix Item Details SDR-5100 Smart phone Smart phone Android, i-phone (iPad included) Protocol support RTP , RTSP , HTTP , CGI T ransmission speed CIF Max 15fps(Single Channel)/ CIF Ma.
! aPPendix Item Details SDR-5100 Connections Ethernet 1 RJ45 10/100 Base-T Serial interface – USB USB 2.0, 2 ports (Front x 2, 1A) e-SA T A – Application Supoort Mouse, Remote Controller PTZ Proto.
118_ appendix appendix DEF AUL T SETTING This returns the factory default settings. The settings are made as follows; • Use System/Load Factory Default in MENU ` The default settings are based on SDR-5100. ` The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
! APPENDIX Category Details Factory Default Device Monitor Monitor Event Display OFF Display All Multi CH SEQ Time 5sec VGA/HDMI 1280 x 1024 Display Position Setup 30 Mode Live Mode ALL Play Mode ALL .
120_ appendix appendix Category Details Factory Default Network Connection Mode Connection Connection Mode Static IP Bandwidth 2Mbps IP 192.168.1.200 Gateway 192.
! APPENDIX TROUBLESHOOTING Symptom Countermeasures The system does not turn on and the indicator on the front panel does not work at all. y Check if the power supply system is properly connected. y Check the system for the input voltage from the power source.
122_ appendix appendix Symptom Countermeasures A message of “Need to reset date/time.” Is displa yed on the screen. y This message is displayed if there occurs a problem with the time setting of the internal clock or an error in the clock itself.
! APPENDIX Symptom Countermeasures Recording does not work. y If your player does not display a Live image at all, that indicates recording does not work so first check if you see an image on the screen. y Recording does not work if the recording settings are not properly configured.
GNU GENERAL PUBLIC LICENSE V ersion 2, June 1991 Copyright (C) 1989, 1991 Free Softwar e Foundation, Inc. 51 Franklin Street, Fifth Floor , Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
normally distributed (in either source or binary form) with the major components (compiler , ker nel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
Preamble The GNU General Public License is a free, copyleft license for softwar e and other kinds of works. The licenses for most software and other practical works ar e designed to take away your freedom to shar e and change the works.
5. Conveying Modified Source V ersions. Y ou may convey a work based on the Program, or the modifications to produce it fr om the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date.
8. T ermination. Y ou may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to pr opagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11).
16. Limitation of Liability . IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER P ARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED .
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility , other than as an argument passed when the facility is.
so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all.
(online or textual) provided with the package.Redistribution and use in source and binary forms, with or without modification, ar e permitted provided that the following conditions ar e met: 1. Redistributions of source code must r etain the copyright notice, this list of conditions and the following disclaimer .
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.
.
SALES NETWORK SAMSUNG TECHWIN CO., L TD . Samsungtechwin R&D Center , 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc .
Ein wichtiger Punkt beim Kauf des Geräts Samsung SDR4100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung SDR4100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung SDR4100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung SDR4100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung SDR4100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung SDR4100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung SDR4100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung SDR4100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung SDR4100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
