Benutzeranleitung / Produktwartung SCC-C6403P des Produzenten Samsung
Zur Seite of 29
Smar tDome Camera SCC-C6403P Part : AB68-00572A(00) Owner’ s Instructions êÛÍÓ‚Ó‰ÒÚ‚ÓÔÓθÁÓ‚‡ÚÂÎfl Instrukcja obs∏ugi E RU PL 00572A-SCC-C6403P-E+R+P 8/17/06 1:33 PM Pa.
E Safety Precautions Impor tant Safety Instructions The purpose of this information is to ensure proper use of this product to prevent danger or damage to property.
6. Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Doing so may cause personal injury due to fire, electrical shock, or falling objects.) 7. Do not install the unit in humid, dusty, or sooty locations.
1-2 E 1-1 Bef ore Usage This is a basic instruction manual f or the SCC-C6403P user . It contains all the instructions needed to use the SCC-C6403P from a simple introduction of the control locations and functions of the SCC-C6403P to installation methods in the set up menu.
1-3 1-4 E In this chapter we will briefly introduce the SCC-C6403P and show main functions , locations of control and Switch Setting. Chapter 1 SCC-C6403P Overview 4. ZONE SET............................................................................
1-6 E 1-5 Locations of Control FRONT SCC-C6403P Introduction SCC-C6403P is a zoom lens b uilt in smar t dome camera which provides y ou with the best monitor ing function in connection with CCTV at banks or companies.
1-8 E 1-7 AD APTER CONNECTION SCC-C6403P Adapter BOARD AC 24V OUT POWER AC 24V OUT POWER BA CK 00572A-SCC-C6403P-E+R+P 8/17/06 1:34 PM Page 1-7.
1-10 E 1-9 Setting RS-422A/RS-485 termination 12 As it is shown in the structure map, when Controller and RS-422A/RS- 485 is connected it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest.
2-2 E 2-1 Bef ore Installing Checking P acka ge Contents Please check that all components listed below are included in the package: SCC-C6403 Bracket anchor AC 24V OUT POWER Camera Holder Adapter Boar.
2-3 2-4 E 1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT) 2. Then, connect the other end of the connector to the Video Input Terminal of the monitor. Cable Connection 4. Adjust the switch on the Power Adapter to the proper voltage.
2-6 E 2-5 3) INDOOR HOUSING (SHG-120) This housing is used for installing the SmartDome Camera to an indoor wall or a ceiling. 4) OUTDOOR HOUSING (SHG-220) This housing is used for installing the SmartDome Camera to an outdoor wall or a ceiling.
2-8 E 2-7 1. [Figure 1] Install the structure on the ceiling. (Refer to Installation reference for the Length of the structure) * Built in by the builder of the structure 3. [Figure 2] Assemble the BRKT-ANCHOR on the ceiling and screw the 4 bolts in. [Figure 2] 2.
3-1 E 2-9 Chapter 3 Setup Menu Overview In this chapter , we will look ov er the Setup Menu of the SCC-C6403P , First we'll look o v er the ov erall structure of the Setup Menu, and then we'll look at the functions of each men u. 7. [Figure 7] Match the 3 holes on the back of the CAMERA and the CONNECTOR and turn it left about 15 degrees.
3-3 E 3-2 The diagram shown above illustrates the overall structure of the Setup Menu. In this section, a description of the Setup menu features will enable users of the SCC-C6403P to tailor it to their personal needs.
3-5 E 3-4 Use the controller to press the MENU selection key and the following screen will be displayed. In case of ➀ , use UP/DOWN/LEFT/RIGHT/[ENTER] key for MENU setup.
3-7 E ➜ Press [Enter] MO TION DET In MOTION DET, you can set the Motion Detection function, Motion Detection Sensitivity, and the Area of Motion Detection. If the Motion Detection function is set, the movement of an intruder can be detected. When motion is detected, it sets off the Alarm signal of the Controller.
DISPLA Y ZOOM In DISPLAY ZOOM, you can display the ZOOM scale on the screen. ❈ If no change on the ZOOM scale is made for 3 seconds, the information window will disappear. 3-9 E 3-8 ZOOM SPEED In the ZOOM SPEED menu you can select the speed of the ZOOM Key (Tele/Wide).
3-11 E 3-10 For items in the BLC menu, the user can set the size and location of the BLC area by pressing [ENTER] key after put the cursor on USER … using the [Left, Right] key. For SIZE items, you can use the [Up, Down, Left, Right] key to designate the SIZE, and then press the [ENTER] key.
3-13 E (VIDEO SET) IRIS ALC... SHUTTER AUTO X2... MOTION F.FAST WHITE BAL ATW1 DIS --- FOCUS MODE ONEAF SPECIAL ... EXIT QUIT AG C The AGC menu was designed to provide you with brighter screen supposed you photographed any subject in the dark resulting in less brighter image than regulated.
3-15 E You can select one of four modes for white balance adjustment as follows: - ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is monitored continuously and thereby white balance is set automatically. The following are the approximate supported color temperature ranges in these modes.
3-17 E 3. PRESET This is the menu that user sets the PAN/TILT location, Zoom/Focus, and screen condition, so the camera can monitor the presetting area on demand. A total of 128 presets are available. ➜ Press [Enter] ➜ Press [Enter] ** MAIN MENU ** CAMERA SET.
3-19 E 4. ZONE SET The ZONE SET menu includes the setup of ZONE DIRECTION, and ZONE AREA. ➜ Press [Enter] (ZONE SET) ZONE DIR SET OFF ZONE AREA SET OFF EXIT QUIT ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET.
3-21 E 3-20 ZONE AREA SET 0 LOCATION ... ZONE ID SET ... ZONE ENABLE ON EXIT QUIT ZONE ID SET This function is used to allocate as many as 12 IDs to each zone area. Use Left , Right, UP, or DOWN for this purpose. You may select the ID position from the additional menu of “ LOCATION.
3-23 E 3-22 SPEED This is a setting function for movement speed setup. It can be set from STEP1 to STEP64. D WELL TIME This is a function for setting up the time to stay in the START to END position. P A TTERN This is a replay function so that the MANUAL functions such as PAN, TILT, ZOOM, and FOCUS, IRIS are played for 2 minutes.
3-25 E 3-24 A UT O PLA Y AUTO PLAY executes SCAN, AUTO PAN, PATTERN, and PRESET when there is no camera action after AUTO RETURN finishes. A UT O RETURN This menu sets up the time during which AUTO PLAY repeats.
3-27 E 3-26 7. O THER SET PROPOR TIONAL P/T This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual operation of PAN/TILT. If you set PROPORTIONAL P/T to ON, the PAN/TILT speed will increase in the ZOOM WIDE mode and decrease in the ZOON TELE mode even in the same manual operation.
3-29 E 3-28 ➜ Press [Enter] ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO... ( SYSTEM INFO) ALARM VER. V1.000 MOTOR VER. V1.000 CAMERA VER. V1.000 EEPROM VER. V1.000 PROTOCOL SAMSUNG COMM.
3-31 E 3-30 9. SHOR T KEYS SSC-1000 or SSC-2000 Controller supports the following short keys. Other keys than AUTO CAL. and AUTO RETURN, upon execution, shall be applied to the MENU setup process. 1) The use of AUTO RETURN will be available only when the function equivalent to AUTO PLAY, a sub menu of AUTO SET has been built in.
3-32 Contents - Zoom lens single body SmartDome CAMERA - AC 24 ± 10% (50Hz ± 0.3Hz) - 18W - PAL STANDARD COLOR SYSTEM - 1/4 inch 410K IT Type S-HAD CCD - 752(H) X 582(V) - 625 Lines, 2:1 Interlace - Horizontal : 15,625 Hz(INT) / 15,625 Hz(L/L) - Vertical : 50 Hz(INT) / 50 Hz(L/L) - INT/LINE LOCK - 480 TV LINES - 50dB (AGC OFF) - COLOR : 0.
Ein wichtiger Punkt beim Kauf des Geräts Samsung SCC-C6403P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung SCC-C6403P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung SCC-C6403P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung SCC-C6403P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung SCC-C6403P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung SCC-C6403P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung SCC-C6403P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung SCC-C6403P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung SCC-C6403P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
