Benutzeranleitung / Produktwartung SAMTRON 59E des Produzenten Samsung
Zur Seite of 75
Install drivers SAMTRON 591S/58V/59E/78E/78DF/78BDF/98PDF.
Failure to follow di rections noted by this symbol could resul t in bodily harm or damage to equipment. Prohibited Important to read and understa nd a t all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to preve nt an electric shock Power When not used fo r extended perio d of time , set your computer to DPMS.
z This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the p lug with wet ha nds. z This may cause an electric shock or fire. Use only a pr op erly grou nded plug a nd recept acle. z An improper ground may cause el ect ric shock or equipment da mag e.
Do not drop the monitor w hen moving it. z This may cause d amage to the prod uct or human body. Place the monitor on a flat and stab le surface. z The monitor may cause injury by falling. Set down the monitor carefully. z The monitor could be da maged or broken.
z You may buy a recommended detergent at any Servic e Ce nter. If the connector between the pl ug and the pin is d usty or dirty, cl ean it properly with a dry clo t h. z A dirty connector may cause an electric shock or fire. Do not set a glass of water, chemical s or any small metal objects on the monitor.
Do not use or st ore inflammable sub stances near the moni tor. z This may cause an explosion o r fire. Do not try to move the moni tor by pull ing only the wire or the si gnal cable. z This may cause a breakdown, elec tri c shock or fire due to damage to the cable.
Please make su re the followi ng items are in cluded with your mon itor. If an y items are missin g , contact y our deale r . Unpacking Monitor Manual Quick Setup Gu ide Warranty Car d (Not available .
Stand Stand For Multimedia model (Option) Manual User Guide Cable Sound Cables ( 2each ) DC Power Cord Stand Multimedia S p eaker Stand Front.
Menu button [ ] Opens the OSD menu. Also used to exit th e OSD menu or return to the previous menu. Adjust buttons [ ] These buttons allow you to high lig ht and adjust items in the menu. Enter button [ ] Used to select the OSD menu. Power button Use this button for turn the monitor on and off.
(The configu ration at the b ack of the moni tor may vary from pro duct to product.) Power port Connect the power cord for your monitor to the power p ort on the back o f the moni tor. Signal Cable Connect the signal cable to the video port on your comput er, video board, video card, or graphi cs c ard.
Please make su re the followi ng items are in cluded with your mon itor. If an y items are missin g , contact y our deale r . Unpacking Monitor Manual Quick Setup Gu ide Warranty Car d (Not available .
Stand Stand For Multimedia model (Option) Manual User Guide Cable Sound Cables ( 2each ) DC Power Cord Stand Multimedia S p eaker Stand Front.
Menu button [ ] Opens the OSD menu. Also used to exit th e OSD menu or return to the previous menu. Adjust buttons [ ] These buttons allow you to high lig ht and adjust items in the menu. Enter button [ ] Used to select the OSD menu. Power button Use this button for turn the monitor on and off.
Signal Cable Connect the signal cable to the video port on your comput er, video board, video card, or graphi cs c ard. See Connecting the Mon it or for further information re garding cable connections. Bottom Signal Cable Co nnect the sig nal cable to th e video port on your computer, video board, video card, or graphi cs c ard.
Setup-For Multimedia mo del | Multimedia Spe ake r Stand 1. Connect the power cord for your monitor to the power port on t he back of the m onitor. Plug the power cord fo r the monitor into a nearby outlet. 2-1. Connecting to a comput er Connect the signal cable to the 15-pin , D-sub connector on the back of your moni tor.
1. Turn off your computer and unplu g the power cord. 2. Connect the end of the signal cable t o your compute r's video port(vid eo board, vi deo card or graphics card). 3. Connect one end of the other sou nd cable to the Mic Input jack on your sou nd card or computer.
5. On/Off Volume Turns On/Off and adjusts the output volume. 6. Treble Con trol Use to control high frequencies. 7. Bass Control Use to control low frequenc ies. 8. Mic Inp ut Ja ck To transmit your voice,connect a microphone to this jack. 9. Headphone Jack To listen in privacy,connec t headphones here .
Remove the twist-tie before atta ching the base to the monitor. Attaching the B ase 1. Place the monitor upside-dow n on a flat work surface. 2. Align the tabs on the base with the correspo nding slots on the bottom of the mo nitor. 3. Press the base onto the monitor un til the tabs are fully engaged in the slot s.
1. Insert CD into the CD-ROM driver. 2. Click "Windows XP/2000 Dri ver" . 3. Choose your monitor mode l in the mode l list, then cl ick the "OK" butt on. 4. Click the " Install " button in the " Warning " window.
3. Click " Display " icon and choose the " Settings " tab then click " Advanced.. ". 4. Click the " Properties " button on the " Monitor " tab and select " Drive r " tab. 5. Click " Update Driver.
7. Click the " Browse " button then choo se A:(D:Driver) a nd choose your monitor model in the model list and cli ck the " Next " button. 8. If you can see following " Me ssage " window, then click the " Continue Anyway " button.
10. Monitor d river installatio n is comple ted. Microsoft ® Window s ® 2000 Operating System When you can see "D ig ital Signat ur e Not Found" on your monitor, follow these step s. 1. Choose " OK " button on the " Insert disk " w indow.
9. Enter the model n ame of your mo ni tor . This information will not af fec t the a c tu al execution of X-Window . 10. You have fin ished setting up your monitor.
Setup-For Multimedia mo del | Multimedia Spe ake r Stand 1. Connect the power cord for your monitor to the power port on t he back of the m onitor. Plug the power cord fo r the monitor into a nearby outlet. 2-1. Connecting to a comput er Connect the signal cable to the 15-pin , D-sub connector on the back of your moni tor.
1. Turn off your computer and unplu g the power cord. 2. Connect the end of the signal cable t o your compute r's video port(vid eo board, vi deo card or graphics card). 3. Connect one end of the other sou nd cable to the Mic Input jack on your sou nd card or computer.
5. On/Off Volume Turns On/Off and adjusts the output volume. 6. Treble Con trol Use to control high frequencies. 7. Bass Control Use to control low frequenc ies. 8. Mic Inp ut Ja ck To transmit your voice,connect a microphone to this jack. 9. Headphone Jack To listen in privacy,connec t headphones here .
Remove the twist-tie before atta ching the base to the monitor. Attaching the B ase 1. Place the monitor upside-dow n on a flat work surface. 2. Align the tabs on the base with the correspo nding slots on the bottom of the mo nitor. 3. Press the base onto the monitor un til the tabs are fully engaged in the slot s.
1. Insert CD into the CD-ROM driver. 2. Click "Windows XP/2000 Dri ver" . 3. Choose your monitor mode l in the mode l list, then cl ick the "OK" butt on. 4. Click the " Install " button in the " Warning " window.
3. Click " Display " icon and choose the " Settings " tab then click " Advanced.. ". 4. Click the " Properties " button on the " Monitor " tab and select " Drive r " tab. 5. Click " Update Driver.
7. Click the " Browse " button then choo se A:(D:Driver) a nd choose your monitor model in the model list and cli ck the " Next " button. 8. If you can see following " Me ssage " window, then click the " Continue Anyway " button.
10. Monitor d river installatio n is comple ted. Microsoft ® Window s ® 2000 Operating System When you can see "D ig ital Signat ur e Not Found" on your monitor, follow these step s. 1. Choose " OK " button on the " Insert disk " w indow.
9. Enter the model n ame of your mo ni tor . This information will not af fec t the a c tu al execution of X-Window . 10. You have fin ished setting up your monitor.
1. Opens the OSD me nu. Also use to exit the OSD me nu or return to the previous menu. 2. These buttons allow you to high lig ht and adjust items in the menu.
Contrast.
OSD Description Play/stop Adjust the Brightness. Adjust the Contrast. A "Moiré" pattern can appear on your screen, loo king like a series of concentric circles or arcs.
Color temperature is a measure of th e ' warmth' of the image colors. (6500K / 9300K) Use to adjust the monitor color se tting.(Red) Use to adjust the monitor color se tting.(Green) Use to adjust the monitor color se tting.(Blue) When you adjust the Brightness an d Contrast after sRGB mode is selected, sRGB mode exits.
You can see the frequency (user contro l mod e) used by the user, the polarity of the operat ion al signals, the default frequency (def aul t mode) set when you buy the mon itor an d th e resolution level. Note : These screens do not allow any cha nges to the settings, they are for information on ly.
1. Opens the OSD me nu. Also use to exit the OSD me nu or return to the previous menu. 2. These buttons allow you to high lig ht and adjust items in the menu.
Contrast.
OSD Description Play/stop Adjust the Brightness. Adjust the Contrast. A "Moiré" pattern can appear on your screen, loo king like a series of concentric circles or arcs.
Color temperature is a measure of th e ' warmth' of the image colors. (6500K / 9300K) Use to adjust the monitor color se tting.(Red) Use to adjust the monitor color se tting.(Green) Use to adjust the monitor color se tting.(Blue) When you adjust the Brightness an d Contrast after sRGB mode is selected, sRGB mode exits.
You can see the frequency (user contro l mod e) used by the user, the polarity of the operat ion al signals, the default frequency (def aul t mode) set when you buy the mon itor an d th e resolution level. Note : These screens do not allow any cha nges to the settings, they are for information on ly.
1. Opens the OSD me nu. Also use to exit the OSD me nu or return to the previous menu. 2. These buttons allow you to high lig ht and adjust items in the menu.
Contrast.
OSD Description Play/stop Adjust the Brightness. Adjust the Contrast. A "Moiré" pattern can appear on your screen, loo king like a series of concentric circles or arcs.
Color temperature is a measure of th e 'warmth' of the ima ge colors. The available range is be twee n 5000 to 9300K. Use to adjust the monitor color se tting.(Red) Use to adjust the monitor color se tting.(Green) Use to adjust the monitor color se ttin g.
You can see the frequency (user contro l mod e) used by the user, the polarity of the operat ion al signals, the default frequency (def aul t mode) set when you buy the mon itor an d th e resolution level. Note : These screens do not all ow an y changes to the setting s, the y are for information only .
Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If you do need assistance , please call th e phone number on th e Information section or contact your de al er . Symptom Check List Solutions No images on the screen.
speaker or a high voltage wire near by? Is the voltage stable? The screen image can ap pear to shake or vibrate at a particula r time of day due to low supply voltage. The screen image can also ap pear to shake or vibrate if there is a problem with the video card or the compu ter's main board .
4. Check if the scanning ratio of the video scree n is set at 75Hz or 85Hz. (Do not exceed 60Hz whe n using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, b.
4. Turn off your monitor and reco nnect the video ca ble; then turn on both your computer and the monitor . If your monitor screen remains blank after using the previous procedure, check your vide o controller and computer system; your monitor is functioning properly.
General General Model Name SAM T R O N 5 9 1S /58V/59E Picture Tub e Type 15"(38cm) DynaFlat (35cm view able) Deflection an gl e 90 ° Dot Pitch 0.24mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask.
90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 65W Dimensions (WxDxH ) 361 x 379.2 x 347mm (After instal lation of Stand ) Weight 11.0kg Environmen tal consider ations Operating Temper.
Horizontal Frequency The time to sca n one lin e connecting the right edge to the left edge of the screen ho rizontally is c alled Horizontal Cycle and the inverse number of the Horizontal Cycle is ca lled Horizontal Frequ ency.
General General Model Name SAMTRON 78E Picture Tub e Type 17"(43cm) Full square type (40.6cm viewable) Deflection an gl e 90 ° Dot Pitch 0.23mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask.
Power Supply 90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 75W Dimensions (WxDxH ) 401 x 410 x 378mm (After installation o f Stand) Weight 14.
Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.5 00 -/- VESA, 800 x 600 53.674 85.061 56.2 50 +/+ VESA, 1024 x 768 60.023 75.029 78.7 50 +/+ VESA, 1024 x 768 68.
General General Model Name SAMTRON 78DF Picture Tub e Type 17"(43cm) DynaFlat (40. 6cm vie wable) Deflection an gl e 90 ° Dot Pitch 0.20mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask.
Power Supply 90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 75W Dimensions (WxDxH ) 401 x 410 x 378mm (After installation o f Stand) Weight 14.
Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.5 00 -/- VESA, 800 x 600 53.674 85.061 56.2 50 +/+ VESA, 1024 x 768 60.023 75.029 78.7 50 +/+ VESA, 1024 x 768 68.
General General Model Name SAMTRON 78BDF Picture Tub e Type 17"(43cm) DynaFlat (40. 6cm vie wable) Deflection an gl e 90 ° Dot Pitch 0.20mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask.
90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 75W Dimensions (WxDxH ) 401 x 410 x 378mm (After installation o f Stand) Weight 14.3kg Environmen tal consider ations Operating Temperatu.
Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 1024 x 768 68.
General General Model Name SAMTRON 98PDF Picture Tub e Type 19"(48cm) DynaFlat (45. 8cm vie wable) Deflection an gl e 90 ° Dot Pitch 0.20mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask.
90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 110 W Dimensions (WxDxH ) 445 x 457.5 x 416mm (After instal lation of Stand ) Weight 18.
Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 1024 x 768 68.
Service The address an d p hone number o f the com p an y can be chan g ed without p revious notice. SAMTRON CANADA SAMSUNG ELECTRONIC S CANADA INC. 7037 FINANCIAL DRIVE MISSISSAUGA, ONTARIO L5N 6R3 TEL : 1-800-726 -7864 FAX : 905-542-1199 SAMTRON EUROPE SAMSUNG ELECTR ONICS GM BH SAMSUNG-HAUS, AM KRONBERGER HANG 6 65824 SCHW ALBACH/TS .
17TH, HAMACHO CENTER BLDG. 2-31-1, NIHONBASHI-HAMACHO, CHOU-KU, TOKYO 103, JAPAN TEL : (81-3) 5641-9860 FAX : (81-3) 564 1 -9861 SAMTRON U.S.A. SAMTRON COMPUTER PRODUCTS CUSTOMER SERVICE 400 Valley Road Suite 201, Mt.
Samsung is the registered trademark of Samsung Elect ron ics Co ., Ltd.; Microsoft , Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA , DPMS and DDC are registered trad emarks of Vide o Elec tro nics Standard Association; the ENERGY STAR name and logo are registered trademarks of the U.
FCC Information | IC Complia nce Noti ce | MPR II C ompliance | European Not ice (Europ e only) | PCT Notice | VCCI | TCO'95-Ecolo gical require ments for pers onal computers (TCO'95 appli e.
MPR II Compliance This monitor complies with SWEDAC(MPR II) recommendation s for reduced electric and magnetic fields. European Notice(Europe Only) Products with the CE Marking co mply with both the EMC Direct ive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Vol tage Directive (73/23/EEC) issu ed by the Commission of the European Commun ity.
the adaptation of goods and services to the environ m en t.The main problem as far as monitors and other electronic equi pment are concerned is that enviro nmentally harmful substa nce s are used both in the products and d uring their manu facture.
Mercury Mercury is sometimes found in batteries, relays and switches. Mercury damages the nervou s system and is toxic in high doses. z TCO'95 requirement states that batteri es may not contain more than 25 ppm (parts p er million) of mercury.
complete environmental criteria do cume nt may be ordered from: TCO Develop ment SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regard ing TCO'99 ap prove d and labelled pro ducts may also be obta ined via the Internet, using the address: http ://www.
Congratulations! The display you have just purchased carries t he TCO'03 Displ ays label. This means that your display is designed, manufactured an d tested a ccording to some of the strictest quality a nd environmental requirements in the world.
Ein wichtiger Punkt beim Kauf des Geräts Samsung SAMTRON 59E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung SAMTRON 59E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung SAMTRON 59E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung SAMTRON 59E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung SAMTRON 59E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung SAMTRON 59E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung SAMTRON 59E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung SAMTRON 59E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung SAMTRON 59E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
