Benutzeranleitung / Produktwartung HT-DS420 des Produzenten Samsung
Zur Seite of 38
DIGIT AL HOME THEA TER SYSTEM HT -DS400 HT -DS420 HT -DS403T HT -DS420S TUNING/CH TV DVD RE CEIVER OPEN/CLOSE DVD TUNER AUX EZ VIEW NTSC/PAL SLOW SUB TITLE STEP PL II R E T U R N M E N U IN F O M U T E MODE ENTER SOUND EDIT TEST TONE SLEEP LOGO DIGEST SLIDE MODE CANCEL ZOOM REMAIN TUNER MEMORY P.
12 Safety W arnings Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player . Install your player horizontally , on a suitable base (furniture), with enough space around it for ventilation (3~4inches).
4 Features 3 Multi-Disc Playback & AM/FM T uner The HT -DS400/HT -DS420/HT -DS403T/HT -DS420S combines the convenience of multi- disc playback capability , including DVD-AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, DivX, CD-R/RW , and DVD-R/RW , with a sophisticated AM/FM tuner , all in a single player .
CD-R Discs • Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs may not be playable. • Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable. • If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
SUBWOOFER REAR R FRONT R CENTER REAR L FRONT L IMPEDANCE FRONT / CENTER / REAR : 4 Ω SUBWOOFER : 4 Ω —Rear Panel— Audio Cable Video Cable Remote Control FM Antenna User's Manual AM Antenna DSP P .SCAN TITLE GRP CHAP PRGM TRK ST TUNED kHz MHz LINEAR PCM D VD A UDIO MPEG L C R SW RR RL LS S RS REP .
To open the remote control cover , push the top of the cover , then slide downward. 10 Insert Remote Batteries The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor .
RS LS C L SW R • Make sure the colors of the speaker terminals match the colors of the connecting jacks. • Make sure the polarities (+ and –) are correctly . • Insert the black wire into the black (–) terminal and the gray wire into the gray (+) terminal.
Connecting the V ideo Out to TV 13 METHOD 1 Composite Video ............... Good Quality Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television. METHOD 3 Component (Progressive Scan) Video .
Press AUX on the remote control to select AUX 1 or AUX 2. • Each time the button is pressed, the selection changes as follows: DIGIT AL IN ➝ AUX 1 ➝ AUX 2. • Y ou can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD ➝ DIGIT AL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
18 17 CONNECTIONS The cooling fan dissipates the heat generated inside the unit so that the unit can be operated normally . The cooling fan is activated automatically to supply cool air to the unit. Please observe the following cautions for your safety .
20 • Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately . • Y ou can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing. • Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO and Numeric (0-9) buttons.
Disc Playback • Depending on the content of the disc, the initial screen may appear different. • Depending on the recording mode, some MP3-CDs cannot be played. • T able of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.
24 CONNECTIONS • Depending on the recording mode, some MP3-CDs may not play . • T able of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc. Note MP3-CD Playback Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.
Rotate/Flip Function button: Flip V ertically button: Flip Horizontally button: Rotate 90° Counterclockwise button: Rotate 90° Clockwise Digest Function 2 Press Cursor , , , buttons to select the desired image and then press ENTER button. 1 Press DIGEST button during playback.
Fast playback 28 DivX Playback Skip Forward/Back During playback, press the button. • Go to the next file whenever you press button, if there are over 2 files in the disk. • Go to the previous file whenever you press button, if there are over 2 files in the disk.
30 29 OPERA TION Displaying Disc Information Y ou can view disc playback information on the TV screen. Press INFO button. • Each time the button is pressed, the display changes as follows: DVD Displ.
Repeat Playback Repeat playback allows you to repeatedly play a chapter , title, track (song), or directory (MP3 file). Press REPEA T button. • Each time the button is pressed during playback, the repeat playback mode changes as follows: DVD VCD CD MP3 JPEG • Repeat playback operation is not possible with version 2.
A-B Repeat Playback 34 • The A-B Repeat function will not work on an MP3 or JPEG disc. 2 Press Cursor button to move to REPEA T PLA YBACK ( ) display . • For a VCD or CD, press INFO button once. 1 Press INFO button twice. A - A - ? REPEA T : A— A - B REPEA T : A—B • The specified segment will be played repeatedly .
36 Zoom Function This function allows you to enlarge a particular area of the displayed image. Zoom (Screen Enlarge) Function DVD VCD Aspect Ratio DVD 2 Press Cursor , , , buttons to move to the area you want to enlarge. 1 Press ZOOM button. • Each time the button is pressed, the zoom level changes as follows: 3 Press ENTER button.
38 Moving Directly to a Scene/Song • The selected file will be played. • An MP3 or JPEG disc cannot be moved from the disc information screen. • When playing an MP3 or JPEG disc, you cannot use , to move a folder . To move a folder , press (Stop) and then press , .
Using the T itle Menu For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, this function may either not work at all or may work differently . 2 Press Cursor , button to move to ‘T itle Menu’. DVD 1 In Stop mode, press MENU button.
41 42 * If the language you selected is not recorded on the disc, menu language will not change even if you set it to your desired language. Selecting the OSD Language Selecting the Audio Language (recorded on the disc) Setting the Language OSD language is set to English by default.
43 44 Setting TV Screen type 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. • Once the setup is complete, you will be taken to the previous screen. Press Cursor button to move to ‘TV DISPLA Y’ and then press ENTER button.
45 46 Setting Parental Controls (Rating Level) Use this to restrict playback of adult or violent DVDs you do not want children to view. • This function works only if a DVD disc contains the rating level information. Press RETURN button to return to the previous level.
2 1 Press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. 4 • Enter the old password, a new password, and confirm new password. • The setting is complete. 3 5 Press RETURN button to return to the previous level.
49 50 Setting the W allpaper While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper. DVD VCD JPEG SETUP • “ COPY LOGO DATA ” will be displayed on the TV screen. • The selected wallpaper will be displayed. • You can repeat Steps 1 and 2 to set up to 3 wallpapers.
Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 51 52 SETUP DVD Playback Mode Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
2 1 4 3 Setting the Speaker Mode Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. Setting the T est T one Press the Test Tone to check the speaker connections and to adjust the speaker levels.
Setting the Delay T ime If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.
57 Setting the Audio Quality You can adjust the balance and level for each speaker. 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTER button.
59 60 Setting the DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 12 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button.
61 62 Dolby Pro Logic II Mode You can select the desired Dolby Pro Logic II audio mode. Dolby Pro Logic II Effect This function works only in Dolby Pro Logic MUSIC mode. Press PL II MODE button. PRO LOGIC II • MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
63 64 Listening to Radio You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation. Presetting Stations 2 1 • The selection toggles back and forth between "FM ➝ AM" each time the TUNER(BAND) button is pressed.
65 66 Convenient Functions • The remaining time before the DVD player will shut itself off is displayed. • Pressing the button again changes the sleep time from what you have set earlier.
67 68 Operating a TV with the Remote Control • The remote control may not work on some brands of TVs. Also some operations may not be possible depending on your brand of TV. • If you do not set the remote control with the code for your brand of TV, the remote control will work on a Samsung TV by default.
70 69 Before Calling for Service Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.
72 Specifications 71 Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean Protection jacket.
74 Notes on T erminology 73 Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left , from the right , etc.). With such discs, the Angle button can be used to change the angle of view for specific scenes.
Ein wichtiger Punkt beim Kauf des Geräts Samsung HT-DS420 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung HT-DS420 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung HT-DS420 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung HT-DS420 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung HT-DS420 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung HT-DS420 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung HT-DS420 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung HT-DS420. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung HT-DS420 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
