Benutzeranleitung / Produktwartung DE40C des Produzenten Samsung
Zur Seite of 243
User Manual DE40C DE46C DE55C The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notic e to improve the performance.
Table Of Cont ents 2 Table Of Contents BEFORE USING THE PRODUCT 12 Copyright 13 Cleaning 13 Storage 14 Safety Precautions 14 Symbols 15 Electricity and Safety 16 Installation 18 Operation PREPARATIONS.
Table Of Contents Table Of Cont ents 3 CONNECTING AND USING A SOURCE DEVICE 56 Before Connecting 56 Pre-connection Checkpoints 57 Connecting and Using a PC 57 Connecting to a PC 60 Changing the Resolu.
Table Of Contents Table Of Cont ents 4 73 What is MDC? 73 Connecting to MDC 75 Connection Manag ement 76 Auto Set ID 77 Cloning 78 Command Retry 79 Getting Started with MDC 81 Main Screen Layout 82 Me.
Table Of Contents Table Of Cont ents 5 113 Advanced Settings 114 Dynamic Contrast 114 Black Tone 114 Flesh Tone 114 RGB Only Mode 114 Color Space 114 White Balance 114 10p White Balance ( Off / On ) 115 Gamma 115 Expert Pattern 115 Motion Lighting ( Off / On ) 116 Picture Options 117 Color Tone 117 Color Temp.
Table Of Contents Table Of Cont ents 6 NETWORK 126 Network Setting 126 Connecting to a Wired Network 127 Wired Network Settings 130 Connecting to a Wireless Network 131 Wireless Network Setting 133 WP.
Table Of Contents Table Of Cont ents 7 146 Caption 146 Caption 146 Caption Mode 147 Digital Caption Options 148 Security 148 Safety Lock ( Off / On ) 148 Button Lock ( Off / On ) 149 Program Rating Lo.
Table Of Contents Table Of Cont ents 8 159 General 159 Max. Power Saving 159 Game Mode 160 BD Wise 160 Menu Transparency 160 Sound Feedback 160 Auto Power 160 Standby Control 161 Lamp Schedule 161 OSD.
Table Of Contents Table Of Cont ents 9 ALLSHARE PLAY 173 What is AllShare Play? 173 Read the following before using AllShare Play with a USB device 175 Using a USB device 176 Connecting to a PC over a.
Table Of Contents Table Of Cont ents 10 195 MagicInfo Lite Player 195 Network Schedule 200 Local Schedule 201 Internal AutoPlay 202 USB AutoPlay 203 Local Schedule Manager 203 Registering a Local Sche.
Table Of Contents Table Of Cont ents 11 SPECIFICATIONS 228 General 230 PowerSaver 231 Standard Signal Mode Table 233 License APPENDIX 234 Contact SA MSUNG WORLD WIDE 236 Responsibility for the Pay Ser.
12 Before Using the Product Before Using the Product Copyright The content s of this man ual are sub ject to cha nge without n otice to im prove qual ity.
13 Before Using the Product Before Using the Product Cleaning Exercise care when cleaning as the panel and e xterior of ad vanced LCDs ar e easily scratche d. Take the following steps when c leaning. The following images are for reference only. Real-life situations may differ from what is shown in the images.
14 Before Using the Product Before Using the Product Safety Precautions Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTR IC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
15 Before Using the Product Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damage d power cor d or plug, o r a loos e power s ocket.
16 Before Using the Product Before Using the Product Caution Installation Warning Do not disconnect the power cord wh ile the prod uct is being used. The product may become damage d by an electric sho ck. Only use the p ower cord pr ovided with your produc t by Samsung.
17 Before Using the Product Before Using the Product Keep the plastic packa ging out of the reac h of children. Children may suffoca te. Do not install t he product on an unst able or vibrating surfac e (insecure shelf, sloped surfa ce, etc.) The product may fall and become dam aged and/o r cause an injury.
18 Before Using the Product Before Using the Product Caution Operation Warning Do not drop the product while m oving. Product failure o r person al injury may result.
19 Before Using the Product Before Using the Product If the product ge nerates abnorma l sounds, a burning smell or smoke, discon nect the power co rd immediate ly and contac t Samsung Custo mer Service Ce nter. An electric shock or fire may re sult.
20 Before Using the Product Before Using the Product Caution Ensure the vents are not b locked by t ablecloths or curtains. An increased inter nal tempe rature may cau se a fire.
21 Before Using the Product Before Using the Product Looking at the screen too close for an exte nded period of time ca n deteriorate your eyes ight. Do not use humidifi ers or stoves ar ound the pr oduct. A fire or electric shoc k may result. Rest your eye s for mor e than 5 minu tes for ev ery 1 hour of product use.
22 Before Using the Product Before Using the Product When replacing the battery, inser t it with the rig ht polarity (+, -). Otherwis e, the bat tery may beco me dama ged or it ma y cause fire , personal injury or damage due to leak age of th e internal liquid.
23 1 Preparations 1 Preparations 1.1 Checking the Contents The appearance of the actual product may differ from the images shown. 1.1.1 Removing the Packaging (for DE40C and DE46C models only) 1 Open the packaging b ox. Be careful not t o damage the prod uct when you open t he packaging with a sharp instrum ent.
24 Preparations 1 1 Preparations 1.1.2 Removing the Packagin g (for DE55C models only) 1 Remove the blac k locking device at the bottom of the box. 2 Using the grooves in the bo x, lift and remove the t op of the box. 3 Check the compo nents and re move the styrofoam an d plastic bag .
25 Preparations 1 1 Preparations 1.1.3 Checking the Components Contact the vendor where you purchased the product if any components are missing. The appearance of the components and items sold separately may differ from the image shown. A stand is not provided with the product.
26 Preparations 1 1 Preparations Items sold separately The stand is not supplied. The following items can be purchased at your nearest retailer.
27 Preparations 1 1 Preparations The RS232C adapter can be used to connect to another monito r using the D-SUB (9-pin) type RS232C cable. Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product.
28 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Control Pa nel Panel Key The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Buttons Description Power on the p roduct. If you press the [ ] button wh en the pro duct is turne d on, the control menu will be displaye d.
29 Preparations 1 1 Preparations Control menu If you press the [ ] button on the panel key ("1.2 Parts") when the product is turned on, the control menu will be displayed. Icons Description Select the connected input source. Move the panel key right to select Source [ ] in the control menu.
30 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n [RS232C IN] Connects to M DC using an R S232C-stereo ca ble.
31 Preparations 1 1 Preparations Assembling the Holder-Wire stand 1.2.3 Anti-theft Lock An anti-theft lock allows you to use th e product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
32 Preparations 1 1 Preparations 1.2.4 Remote Control Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. Remote control button functions may differ for different products.
33 Preparations 1 1 Preparations Adjusting the OSD with the Remote Control To place batteries in the remote control 1. Open the OS D menu. 2. Select from Picture , Sound , Channel , Network , System or Support in the displayed OSD menu screen. 3. Chang e settings as desired.
34 Preparations 1 1 Preparations Remote Control Reception Range Use the remo te control with in 7m to 10 m from th e sensor on t he produ ct at an ang le of 30˚ fro m the le ft and right. Store used batteries out of reach of children and recycle.
35 Preparations 1 1 Preparations 1.2.5 Connection Using an IR Stereo Cable Turn off the device before connecting the External Sens or Kit. After it is connected, turn on the device.
36 Preparations 1 1 Preparations 1.3 Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Ensure that an authorized installa tion company installs the wall mount.
37 Preparations 1 1 Preparations 1.3.2 Ventilation 1. Installation on a Perpendicula r Wall 2. Installation on an I ndented Wall Contact Samsung Customer Service Center for further details.
38 Preparations 1 1 Preparations 1.4 Dimensions Unit: mm (inches) All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your prod uct. Not responsible for typographical or printed errors.
39 Preparations 1 1 Preparations 1.5 Installing the Wall Mount 1.5.1 Preparing before installing Wall-Mount 1.5.2 Installing the Wall Mount Kit The wall mount kit (sold separately) allow s you to mount the product on the wall. For detailed informatio n on installing the wall moun t, see the instructions prov ided with the wall mount.
40 Preparations 1 1 Preparations Unit: mm (inches) Do not install your Wall Mount Kit wh ile your product is turned on. It may result in personal injury due to electric shock.
41 Preparations 1 1 Preparations 1.6 Remote Control 1.6.1 Cable Connection RS232C Cable Pin assignment Interface RS232C (9 pins) Pin TxD (No. 2), Rx D (No.
42 Preparations 1 1 Preparations RS232C cable Connector: 9-Pin D-Sub to Stereo Ca ble LAN Cable Pin assignment -P1- -P1- -P2- -P2- Female Rx Tx Gnd 2 3 5 --------> <-------- --------- 1 2 3 Tx Rx Gnd STEREO PLUG (3.
43 Preparations 1 1 Preparations Connector: RJ45 Direct LAN cable (PC to HUB) Cross LAN cable (PC to PC) Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ TX- 2 <-- ------> 2 T X- RX+ 3 <-.
44 Preparations 1 1 Preparations 1.6.2 Connection Connection 1 Connection 2 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT RJ45 RJ45.
45 Preparations 1 1 Preparations Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT.
46 Preparations 1 1 Preparations 1.6.3 Control Codes Viewing control state (Get control command) Controlling (Set control command) Command Issued IDs can be displayed in hexadecimals. However, ID 0 must be displayed as 0xFF. All communications take place in hexadecima ls.
47 Preparations 1 1 Preparations To control all de vices connecte d by a serial ca ble simultaneous ly irrespective of IDs, set the ID as "0xFE" and transm it commands. Co mmands will b e executed by each device but ACK will not respond.
48 Preparations 1 1 Preparations Volume control Function The volume o f a product can be adjuste d using a PC . Viewing volume sta te (Get Volume Stat us) Setting the vo lume (Set Volu me).
49 Preparations 1 1 Preparations Input source control Function The input s ource of a p roduct can be change d using a PC . Viewing input sour ce state (Get Input Source Stat us) Setting t.
50 Preparations 1 1 Preparations "ERR": A code show ing what error has occurred Screen Function The screen mode of a product can be chang ed using a PC. Screen mode cannot b e controlled w hen the Video Wall function is enabled. This control can only be used on models that include a TV.
51 Preparations 1 1 Preparations Screen size control Function The screen size of a pro duct can b e changed using a PC. Viewing the screen size (Ge t Screen Size Stat us) Ack "Screen .
52 Preparations 1 1 Preparations PIP On/Off control Function The PIP mode o f a product can be tu rned on or off using a PC. Only available on models that have the PIP function. The mode cannot be controlled if Video Wall is set to On . This function is not available in MagicInfo .
53 Preparations 1 1 Preparations Auto adjustment control (PC and BNC only) Function Automatically ad just the PC system screen usin g a PC. Viewing auto adjustm ent state (Get Auto Adjustmen t.
54 Preparations 1 1 Preparations Video Wall Mode Control Function Video Wall mode c an be activa ted on a pr oduct using a PC. This contro l is only available on a pro duct whos e Video Wall is enabled. This function is not available in MagicInfo .
55 Preparations 1 1 Preparations Safety Lock Function PC can be us ed to turn t he Safety Loc k function on or off on a product. This contro l is available regardless o f whether or not the power is tur ned on.
56 2 Connecting and Us ing a Source Device 2 Connecting and Using a Source Device 2.1 Before Connecting Check the follo wing before you connect this pro duct with other devices. Devices that can be conn ected to this p roduct include PCs, camcor ders, speake rs, set top boxes and DVD/Blu-ray Disc players.
57 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2 Connecting and Using a PC 2.2.1 Connecting to a PC Do not conne ct the power cable bef ore conne cting all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable.
58 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an HDMI-DVI Cable When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
59 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an DP Cable DP IN.
60 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selecte d.
61 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 7 Go to Control P anel Display Screen Resolution , and chan ge the resolution.
62 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3 Connecting an External Monitor The following images are for reference only.
63 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4 Connecting to a Video Device Do not conne ct the power cable bef ore conne cting all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable.
64 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4.3 Connection Usin g an HDMI-DVI Cable Audio will not be enabled if the product is conn ected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device.
65 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Be sure to use an HDMI cable with a thickness of 14 mm or le ss. Be sure to purc hase a certified HDMI cable. Ot herwise, the p icture may not d isplay or a conne ction error may o ccur.
66 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.5 Connecting the network box (Sold separately) 2.5.1 MagicInfo To use MagicInfo , a netwo rk box (sold se parately ) must be c onnected to the produc t.
67 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 3 Select the d efault applic ation you want to r un when MagicIn fo starts.
68 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 5 Select a language. (T he default la nguage is English .) 6 Select a display mode . MagicInfo Setup Wizard - v .1.12 Select Language -step 3 Select the language you want to install on the system for menus and dialogs.
69 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 7 Double-check the settings yo u have just co nfigured. If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will appear at the bottom right of the screen.
70 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.6 Changing the Input source 2.6.1 Source MENU [] Support Contents Home Source ENTER [ ] Source allows you to select a variety of sources an d change so urce device n ames.
71 3 Using MDC 3 Using MDC MDC (Multiple Display Contr ol) is an applicati on that allows you to eas ily control multi ple display devices simultaneously using a PC. 3.1 Configuring Settings for Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product.
72 Using MDC 3 3 Using MDC 3.2 MDC Program Installation/Uninstallation 3.2.1 Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. If a software installation window is not di splayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD.
73 Using MDC 3 3 Using MDC 3.3 What is MDC? Multiple display control "MDC" is an application that allows you to easily control mu ltiple display devices simultaneously us ing a PC.
74 Using MDC 3 3 Using MDC Using MDC via Ethernet Enter the IP for the prima ry display devic e and conne ct the de vice to the PC. One d isplay device c an connect to an other using an RS-232C serial ca ble. Connection using a direct LAN cable Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB.
75 Using MDC 3 3 Using MDC 3.3.2 Connection Management Connection m anagement includes th e Connect ion list and Connection list modification opt ions .
76 Using MDC 3 3 Using MDC 3.3.3 Auto Set ID Auto Set ID feature assigns a Set ID fo r all the LFDs connected in d aisy-chain of a sele cted connection. There can b e a maximu m of 100 L FDs in a conn ection. Th e Set ID is a ssigned sequ entially in the da isy- chain runnin g from 1 to 99, and then finally to Se t ID 0.
77 Using MDC 3 3 Using MDC 3.3.4 Cloning Using the Cloning feature, you can copy the settin g of one LFD and ap ply it to mu ltiple selected LF Ds. You can select specific tab cat egories or all t ab categories fo r cloning, using the copy settin g option window.
78 Using MDC 3 3 Using MDC 3.3.5 Command Retry This feature is used to specify the maximum number of time s the MDC command will be retried in case of there being no reply or a corrupte d reply fro m an LFD. Th e retry co unt value ca n be set us ing the MDC options window.
79 Using MDC 3 3 Using MDC 3.3.6 Getting Started with MDC 1 To start the program , click Start Programs Samsung MDC Unified . 2 Click Add to add a disp lay device. If the connect ion is established via RS232C, go to Serial and spec ify the COM Port .
80 Using MDC 3 3 Using MDC If the connect ion is established via Ether net , enter the IP th at was entere d for the disp lay device..
81 Using MDC 3 3 Using MDC 3.3.7 Main Screen Layout Menu Bar Change the status o f a display devic e or the proper ties of the pro gram. Device Category View a list of connected di spla y devices or device groups. Schedule Category View a list of schedules for display devices .
82 Using MDC 3 3 Using MDC 3.3.8 Menus You can power on or off a selec ted device or chan ge the input source or volume of the device. Choose display device s from the lis t of sets, an d select the Home tab. Home Select an item an d change the co rresponding set ting.
83 Using MDC 3 3 Using MDC Alert Fault Devic e This menu sh ows a list of d isplay devices which hav e following er rors - fan e rror, temp erature error, brigh tness sensor error, or lamp erro r. Select a display device from th e list. The Repair button will be en abled.
84 Using MDC 3 3 Using MDC 3.3.9 Screen Adjustment The screen s ettings (c ontrast, brightness, et c.) can be adjusted. Choose display device s from the lis t of sets, an d select the Picture tab. Custom Select an item an d change the co rresponding scr een setting.
85 Using MDC 3 3 Using MDC Green Customize the intensity of gree n color for the selected display device . Blue Customize the intensity of blue co lor for the selected display device. Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device.
86 Using MDC 3 3 Using MDC HDMI Black Le vel Adjust the HDMI Black Le vel for the selected displ ay device. Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode th at does not suppor t detailed configur ation.
87 Using MDC 3 3 Using MDC 3.3.10 Sound Adjustment You can chan ge the sou nd settings. Choose display device s from the lis t of sets, an d select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set.
88 Using MDC 3 3 Using MDC 3.3.11 System Setup Choose display device s from the lis t of sets, an d select the System tab. Video Wall The Vide o Wall functio n can be used to display part of a whole picture or repea t the same picture on each of connec ted multiple d isplay devices.
89 Using MDC 3 3 Using MDC H Select the number of ho rizontal display devices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of vertical display devices. A maximum of 15 displays can be ar ranged in a row.
90 Using MDC 3 3 Using MDC PIP Basic information re quired to adjust PIP will app ear in the men u screen. PIP will be disabled when Video Wall is ON . Note that Picture Size is disabled when PIP is ON . PIP Size View the PIP Size of the curr ent displa y.
91 Using MDC 3 3 Using MDC General User Auto Color Automatically adju st the screen color s. Available only in PC mode. Auto Power Set the prod uct to autom atically po wer on. Standby Control Set the stan dby mode to activate if a n input source is not d etected.
92 Using MDC 3 3 Using MDC Security Safety Lock Lock the on -screen m enus. To unlock the menus, set Safety Lock to Off . Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off . OSD Display Source OSD Select whether to display a messa ge when the Source is chang ed.
93 Using MDC 3 3 Using MDC Time Clock Set Change the c urrent time o n the selec ted displa y device accor ding to th e time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Time : Set the time to powe r on the s elected disp lay device.
94 Using MDC 3 3 Using MDC Once : Activate the timer only on e time. EveryDay : Activat e the timer ever y day. Mon~Fri : Activa te the timer from Monday th rough Frid ay. Mon~Sat : Activate the timer from Mo nday throug h Saturday. Sat~Sun : Activate the tim er on Saturdays and Sundays.
95 Using MDC 3 3 Using MDC Screen Burn Protection Pixel Shift Move the scr een slightly at specified time intervals to prevent scre en burn-in . Screen Saver This function p revents scr een burn-in whe n the scre en of the s elected disp lay device is left idle fo r an extended period of time .
96 Using MDC 3 3 Using MDC Safety Screen The Safety Screen function can be use d to prev ent screen bu rn-in when a stationar y image disp lays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backligh t to reduce power co nsumption.
97 Using MDC 3 3 Using MDC 3.3.12 Tool Settings Security Panel Control Turn on or off the scre en of a display device. Remote Control Enable or disable the remote co ntrol. Reset Reset Picture Reset the scre en settings. Reset Sound Reset the sound settings.
98 Using MDC 3 3 Using MDC Edit Column Options Language : Select a language to use in the MDC program. Afte r selecting a lan guage, restart the MDC program to u se the selec ted langua ge. Command Retry Count : Specify the nu mber of retr y attempts wh en a comm and fails.
99 Using MDC 3 3 Using MDC Edit Column Select the items you want to disp lay in the list of sets. Information View the program informati on. 4.
100 Using MDC 3 3 Using MDC 3.3.13 Other Functions Resizing a Window Place the mou se pointer on a corn er of the pr ogram win dow. An arro w will appe ar.
101 Using MDC 3 3 Using MDC Group Management Creating G roups Create groups an d manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group Edit in the display device list section on the left side o f the program window.
102 Using MDC 3 3 Using MDC Add on the sub level : Create a sub-group under the selected grou p. 3 Enter the grou p name. Deleting Groups 1 Select a grou p name, and click Edit . 2 In the Edit Group window displayed, click Delete . 3 Click Yes . The group will be deleted.
103 Using MDC 3 3 Using MDC Schedule Management Creating Sch edules Create and r egister a sc hedule on a group ba sis. 1 Click All Schedule Lis t in the schedule sec tion on the left side of the prog ram window. The Add button will be enable d in the middle.
104 Using MDC 3 3 Using MDC 3 Click Add belo w the Device Gr oup item, and select the group you wa nt to add a schedule to. 4 Select Date&Time/Action an d click OK . The schedule will be added and a list of schedules will appear in the set list window.
105 Using MDC 3 3 Using MDC 3.3.14 Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emit ted from nearby electronic devices. Issue Solution The display you want t o control does not ap pear on th e system information chart.
106 Using MDC 3 3 Using MDC How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is se lected: Settin gs for the se lected dis play are displaye d. 3 When two displays are selected (e.
107 4 Screen Adjustment 4 Screen Adjustment Configure the Picture settings ( Brightness , Color Tone , etc.). The layout of the Picture menu options may vary depending on the product. 4.1 Picture Mode MENU [] Picture Picture Mode ENTER [ ] Select a picture mode ( Picture Mode ) suitable for the enviro nment where the pr oduct will be used .
108 Screen Adjustment 4 4 Screen Adjustment 4.1.2 If the input source is AV, Component, HDMI or TV Dynamic : This mode is suitable when the ambient light is bright . Standard : This mode is gen erally suitable f or any environme nt. Natural : Suitable for reduci ng eye stra in.
109 Screen Adjustment 4 4 Screen Adjustment 4.3 Screen Adjustment MENU [] Picture Screen Adjustment ENTER [ ] Screen Adjustment provides various pic ture size and aspect ra tio options. Select an option using the and arrow keys, and th e press [ ]. Use the arrow key s to select an op tion in the sub -menu, and th en press [ ].
110 Screen Adjustment 4 4 Screen Adjustment Do not set your product to 4:3 format for a long time. The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn) which is not covered by the warranty.
111 Screen Adjustment 4 4 Screen Adjustment 4.3.2 Zoom/Position Adjusts the pict ure position. Position is only avai lable if Pi cture Size is set to Zoom1 , Zoom2 , Wide Fit or Screen fit . To use the Position fu nction after selecting Zoom1 , Zoom2 , Wide Fit or Screen fit , follow these steps.
112 Screen Adjustment 4 4 Screen Adjustment 4.3.4 Resolution Select If the picture is not normal even whe n the resolution of the graphics card is one of the following , you can optimize the p icture qua lity by select ing the sam e resolution for the pro duct as th e PC using this menu.
113 Screen Adjustment 4 4 Screen Adjustment 4.5 Advanced Settings MENU [] Picture Advanced Settings ENTER [ ] The displayed ima ge may differ depend ing on the model.
114 Screen Adjustment 4 4 Screen Adjustment 4.5.1 Dynamic Contrast Adjust the scre en contrast . Off / Low / Medium / High 4.5.2 Black Tone Select the blac k level to adjust the scr een depth. Off / Dark / Darker / Darkest 4.5.3 Flesh Tone Emphasize pink Fle sh Tone.
115 Screen Adjustment 4 4 Screen Adjustment Blue : Adjust the blue l evel. Reset : Resets the 10p White Balance to its default settings. Available when the Picture Mode is set to Movie and when the external input is set to all input. Some external devices may not support this function.
116 Screen Adjustment 4 4 Screen Adjustment 4.6 Picture Options MENU [] Picture Picture Options ENTER [ ] Select an option u sing the and arrow keys, an d the press [ ]. Use the arro w keys to chan ge the setting, and the n press [ ]. The displayed ima ge may differ depending on t he model.
117 Screen Adjustment 4 4 Screen Adjustment 4.6.1 Color Tone If the input sour ce is PC , DVI , Di splayPort or HDMI (PC connection). Off / Cool / Standard / Warm If the input sour ce is AV , Component , HDM I or TV Off / Cool / Standard / Warm1 / Warm2 Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic .
118 Screen Adjustment 4 4 Screen Adjustment 4.6.5 HDMI Black Level Selects the blac k level on the sc reen to adjus t the screen depth . Normal / Low Available only in HDMI and DVI mode (AV Timing: 48 0p, 576p, 720p, 1080i, 1080p).
119 5 Sound Adjustment 5 Sound Adjustment Configure the sound ( Sound ) settings for the product. 5.1 Sound Mode MENU [] Sound Sound Mode ENTER [ ] Use the up an d down ar row keys to se lect an op tion, and the n press [ ]. Standard : Selects th e normal sou nd mode.
120 Sound Adjustment 5 5 Sound Adjustment 5.2 Sound Effect MENU [] Sound Sound Effect ENTER [ ] If Speaker Select is set to External , Sound Effect is disabled. Available only when Sound Mode is set to Standar d . Virtual Su rround ( Off / On ) This funct ion provides a virtual 5.
121 Sound Adjustment 5 5 Sound Adjustment 5.3 Broadcast Audio Options MENU [] Sound Broadcast Audio Options ENTER [ ] Preferred Langu age (digital channels only) Use the up and down arrow keys to select a languag e, and then press [ ].
122 Sound Adjustment 5 5 Sound Adjustment Auto Volume ( Off / Normal / Night ) Normal equalizes the volume level on each channel, so th at when you c hange channels, the volume level is the sam e. Night equalizes and decrease the vo lume level o n each channel, so each channel is qu ieter.
123 6 Channel 6 Channel MENU [] Ch annel ENTER [ ] This option is available when the input source is TV . m 6.1 Antenna (Air / Cable) MENU [] Channel Antenna ENTER [ ] Before your telev ision can begi n memorizing the available ch annels, you mu st specify the ty pe of signal source that is connec ted to the L ED display.
124 Channel 6 6 Channel 6.2 Auto Program The Auto Prog ram function memorizes all c hannels that a re available over the air or through yo ur cable system and adds them to the Channel List. To start Auto Program , follow these st eps: 1 Push MENU [] Channel Auto Program ENTER [ ] on your remote.
125 Channel 6 6 Channel 6.4 Fine Tune MENU [] Channel Fine T une ENTER [ ] (analog channels only) If the reception is clear, yo u do not h ave to fine tune the cha nnel, as this is done au tomatically duri ng the search and stor e operation. If the signal is weak or disto rted, fine tune the channel manua lly.
126 7 Network 7 Network 7.1 Network Setting 7.1.1 Connecting to a Wired Network There are t hree ways t o attach your product to your LAN u sing cable. You can at tach your pro duct to your LAN by connecti ng the LAN port on the back of your product to an external mod em using a LAN cable.
127 Network 7 7 Network access the Inte rnet so you do not h ave to enter them ma nually. Most hom e networ ks are Dynamic Networks. Some networks requ ire a Static IP addre ss.
128 Network 7 7 Network Automatic Network Settings Use the Automatic Network Se ttings when connecti ng your product to a network th at supports DHCP. To set up yo ur product cable netw ork connectio n automa tically, follow these steps. How to set up automat ically 1 Go to the Network Settings screen.
129 Network 7 7 Network If you make a mistake when entering a number, re-enter the number to correct it. You can also press the up or down arrow button to change the number one unit at a time. 9 When done en tering the IP Address , press [ ]. 10 Press the down arrow key to go to th e Subnet Mask fields, a nd then press [ ].
130 Network 7 7 Network 7.1.3 Connecting to a Wireless Network To connect yo ur product to your network wir eless, you need a wir eless router or mo dem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port.
131 Network 7 7 Network The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product with a USB hub or USB extension cable ot her than the cable supplied with the product.
132 Network 7 7 Network Manual Network Setup Use the Manual Network Settings when con necting your prod uct to a network that re quires a Static IP address or if th e automatic co nnection process has failed. Getting the Netw ork Connect ion Values To view the Ne twork connectio n values on m ost Windows comput ers, follow these steps.
133 Network 7 7 Network 13 Repeat the entry p rocess for each field in the IP Address . If you make a mistake when entering a number, re-enter the number to correct it. You can also press the or button to change the number one unit at a time. 14 When done en tering the IP Address , press [ ].
134 Network 7 7 Network 7.2 Network Status MENU [] Network Network Stat us ENTER [ ] You can chec k the curr ent networ k and Interne t status. The displayed ima ge may differ depend ing on the model. m Network Status Y our wireless network and Internet connection are setup and ready to use.
135 Network 7 7 Network 7.3 MagicInfo Lite Settings MENU [] Network MagicInfo Lite Settings ENTER [ ] 1 Server Server (Setting the MagicI nfo Lite Server IP) Enter the serv er IP addre ss and port n umber.
136 Network 7 7 Network 7.4 Wi-Fi Direct MENU [] Network Wi-Fi Direct ENTER [ ] Set to connec t the produc t to wireless mobile devices. Using thi s function, you can connect w ireless mobile devic es with your p roduct direc tly without a router. To use this function, your mobile device should be supported by the Wi-Fi Direct .
137 Network 7 7 Network Return Returns to t he screen be fore entering the securit y key. The security key should consist of more than 8 digits. Input the generated security key into the device you want to connect. If network does not operate normally, check the security key again.
138 Network 7 7 Network 7.7 Device Name Select or ente r a device n ame. This nam e can be shown on network rem ote controls over the netw ork..
139 8 System 8 System 8.1 Setup MENU [] System Setup ENTER [ ] Configure the channels an d the time wh en setting up the prod uct for th e first time o r when reset ting the unit.
140 System 8 8 System 8.2 Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product. 8.2.1 Configuring settin gs for Multi Control ID Setup Assign an ID to a set. (Range: 0~99 ) Press or to select a n umber, and press [ ] .
141 System 8 8 System 8.3 Time MENU [] System Ti me ENTER [ ] You can configu re Clock Set or Sleep Timer . You can also set the product to automatica lly turn on or off at a specified time using the Timer function. 8.3.1 Clock Set the cloc k to use the v arious vari ous timer f eatures of the product .
142 System 8 8 System 8.3.2 Sleep Timer Automatica lly shuts off the prod uct after a preset period of time. ( Off , 30 min , 60 min , 90 min , 120 min , 150 min and 180 min ). Use the up and down arrows to select a period of time, and then press [ ].
143 System 8 8 System 8.3.4 Off Timer Set the off timer ( Off Timer ) by m aking a selection from one of the seven op tions. ( Of f Timer 1 ~ Off Timer 7 ) You must set the clock before you can use Off Timer . Setup : Select Off , Once , Everyday , Mon~F ri , Mon~Sat , Sat~Sun or Manual .
144 System 8 8 System 8.4 Menu Language MENU [] System Menu Language ENTER [ ] Set the menu language. A change to the language setting will only be applied to the onscreen menu display.
145 System 8 8 System 8.6 Eco Solution MENU [] System Eco Solution ENTER [ ] 8.6.1 Energy Saving Save power with th e Energy Saving feature. While Energy Savin g mode is active, the product po wer consump tion will be controlle d to save po wer. Off / Low / Medium / High / Pic ture Off 8.
146 System 8 8 System 8.6.4 Auto Power Off (Off / On) The produc t will auto matically tu rn off if you don’t press a button on the remo te or touch a button on product fr ont panel with in 4 hours to preve nt overheatin g. 8.7 Caption MENU [] System Caption ENTER [ ] (On-Screen Text Messages) 8.
147 System 8 8 System 8.7.3 Digital Caption Options (digital chan nels only) Adjusts th e each optio n. When done , select Close . Size : Options inc lude Default, Small, Sta ndard and Large. The d efault is Stand ard. Font Styl e : Options in clude Default an d Styles 0 to 7.
148 System 8 8 System 8.8 Security MENU [] System Security ENTER [ ] Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0". Th e PIN screen closes an d the Security menu ap pears. 8.8.1 Safety Lock (Off / On) It sets safe lock function.
149 System 8 8 System 8.8.3 Program Rating Lock (Off / On) When turn ed on, the Program Rati ng Lock feature ca n automatica lly block program s that you deem inappropriate for your ch ildren. You must enter a PIN (pe rsonal identification number) b efore you c an set or change an y of the Program Rating Loc k restrictions.
150 System 8 8 System Canadian E nglish Ra ting : You can block TV programs b ased on th eir Anglophone Canadian r ating. Canadian English Rating displays a column with locks and the following r atings categories. C : Programmin g intended fo r children under ag e 8.
151 System 8 8 System 8.8.4 Change PIN The Change PIN screen will appear. Choose any 4 digi ts for your PIN and enter it in Enter New PIN . Re- enter the same 4 digits in Confirm N ew PIN . When the Confirm screen disappears, press the Close button. The product ha s memorized your new PIN.
152 System 8 8 System Size ( , , , , ): Select a siz e for the s ubpicture. Position ( , , , ): Selec t a position for the sub- picture. In Double ( , , ) mode, you cannot select Position . Sound Select ( Main / Sub ): You ca n choose to listen to the sound from th e Main pictur e or the Sub pictur e.
153 System 8 8 System 8.11 Screen Burn Protection MENU [] System Screen Burn Protection ENTER [ ] To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn preven tion technolog y. Pixel Shift moves th e picture slightly on the screen.
154 System 8 8 System 8.11.2 Timer You can set th e timer for Screen Burn Protection . Timer Off Repeat : Display the im age retention-p reventive patte rn set in Mode at specified time int ervals ( Period ). Period and Time can be configured when Repeat is selected.
155 System 8 8 System 8.11.4 Side Gray When the screen is set to 4:3 aspect rati o, adjust the br ightness of white margins on side s to protect the screen. Off / Light / Dark 8.12 Ticker Input text while a video or imag e is displayed and display the text on the screen.
156 System 8 8 System 8.13 Video Wall MENU [] System Vide o Wall ENT ER [ ] Customize the layout of mult iple displays th at are co nnected t o form a vide o wall. In ad dition, disp lay part of a whole pic ture or r epeat the sam e picture on each o f the connec ted mult iple displays.
157 System 8 8 System 8.13.3 Horizontal This function auto matically divides t he screen acc ording to th e specified numb er of horizon tal displays. Enter the number of horizontally arranged displays. The horizontal sc reen will automatically be divided according to the number entered.
158 System 8 8 System 8.14 Source AutoSwitch Settings MENU [] System Source AutoSwitch Settings ENTER [ ] Turning on the di splay with Source AutoSwitch On , and the previous video source selection is not active, the display will automatica lly search th e different video input so urces for active video.
159 System 8 8 System 8.15 General MENU [] System General ENTER [ ] 8.15.1 Max. Power Saving Turns off the p roduct to re duce powe r consumption after the PC h as been left id le for a specified period of time. Available only in PC , DVI , HDMI , DisplayPort mode.
160 System 8 8 System 8.15.3 BD Wise Provides the optim al picture qu ality for Samsung DVD, Blu-ray and Home Theater products whic h support BD Wise . When BD Wise is turned On , the picture m ode is aut omatically chang ed to the optimal resolution.
161 System 8 8 System 8.15.8 Lamp Schedule Enables the lam p value to be adjusted to a user-speci fied value at a spe cified time in MDC mode . 8.15.9 OSD Display Displays or hides a menu item on the screen. Source OSD / No Signal OSD / MDC OSD 8.
162 System 8 8 System 8.16 Anynet+ (HDMI-CEC) MENU [] System Anynet+ (HDMI-CEC) ENTER [ ] 8.16.1 Anynet+ (HDMI-CEC) What is Anynet+? Anynet+ is a function that enable s you to control all con nected Samsung devices that supp ort Anynet+ with your Samsung product rem ote.
163 System 8 8 System Anynet+ Menu The Anynet+ me nu chang es dependin g on the typ e and stat us of the Anynet + devices conne cted to the product. 8.16.2 Auto Turn Off (No / Yes) Setting an Anynet+ Device to t urn Off automa tically when the product is t urned off.
164 System 8 8 System Troubleshoo ting for Anynet+ Problem Possible Solution Anynet+ does not w ork. Check if the device is an An ynet+ device. The Anynet+ system supports Anynet+ devices only. Check if the Anyn et+ device pow er cord is prop erly connecte d.
165 System 8 8 System 8.17 DivX® Video On Demand MENU [] System DivX® Video On Demand ENTER [ ] Shows the reg istration code authorized for the pro duct. If you connect to the DivX web site and r egister using that co de, you can d ownload t he VOD registr ation file.
166 System 8 8 System 8.19 Reset All MENU [] System Reset All ENTER [ ] This option re turns all the current settin gs for a di splay to the de fault factor y settings. ( Menu Language , Security , Time , Multi Control and Anynet+ will not be initialized.
167 9 Support 9 Support 9.1 Software Update MENU [] Support Software Update ENTER [ ] The Software Update menu lets yo u upgrade your pr oducts software to the late st version. Current Version : This is the software version already installed in the produc t.
168 Support 9 9 Support View this info rmation wh en your pro duct does not work pr operly or wh en you wan t to upgrad e the software. You can find in formation re garding our call center s and how to download products an d software.
169 Support 9 9 Support 9.3 Contents Home MENU [] Support Contents Home ENTER [] You can enjo y useful and va rious content s. 9.3.1 Channel List MENU [] Support Contents Home Channel List ENTER [] You can view all t he channe l searche d. Using the ope ration button s with the Channel List.
170 Support 9 9 Support 9.3.2 Channel Manager MENU [] Support Contents Home Channel Manager ENTER [] Display all the channels se arched and edit the fav orites. Chan ge channe l names, view info rmation, a nd use the delete function. : Switch the antenn a signal to Air or Cable .
171 Support 9 9 Support Using Tools Edit Favorites : Edit selected channels in Favorites . Add : Add selected channels to Favorites . Delete : Delete selected channels from Favorites . : Change the o rder of chan nels in Favorites . : Copy chann els to anoth er Favorites group.
172 Support 9 9 Support 9.3.5 Source Source allows you to select a variety of sources an d change so urce device n ames. You can display the screen of a source device connec ted to the p roduct. Select a source fro m Source List to display the screen of the selected source.
173 10 AllShare Play 10 AllShare Play Enjoy videos, p hotos, music files save d on a USB Mass Storage Class (MSC) device. 10.1 What is AllShare Play? Play photo, vide o or music files saved on a sto rage device. Wirelessly connect a smartpho ne to a PC using a wire less netwo rk.
174 AllShare Play 10 10 AllShare Play The screen saver activat es if the p roduct is le ft idle for a period of time specified in Auto Protection Time . Power-saving mode on some exte rnal hard disk drives may aut omatically deac tivate after connecting to the produ ct.
175 AllShare Play 10 10 AllShare Play 10.1.2 Using a USB device Connecting a USB device 1 Turn on your product. 2 Connect a USB device co ntaining photo, music and/ or movie files to th e USB port on the back or side panel of th e produc t. 3 A message " Connected Device " appears when the USB device is c onnected p roperly .
176 AllShare Play 10 10 AllShare Play 10.1.3 Connecting to a PC over a network Play photo, video and mu sic files saved on a PC through a netwo rk connection in AllShare Play mode. For details on ho w to configur e a network, re fer to the se ction "7.
177 AllShare Play 10 10 AllShare Play 10.1.4 Using the DLNA features If you connect the product and a source device such as a cell phone or PC to the same network, you can play media co ntent saved o n the device su ch as videos , photos and m usic. Visit http:// www.
178 AllShare Play 10 10 AllShare Play 10.2 Using the Basic AllShare Play Features MENU [] Support Contents Home AllShare Play ENTER [] 10.2.1 Sorting the file lists To sort f iles, pr ess on the remote control to specify the sorting criteria. The displayed image may differ depend ing on the model.
179 AllShare Play 10 10 AllShare Play 10.2.2 Playing Selected Files 1 Select files from the list of Videos , Photos , or Music files. 2 Press TOOL on the remot e control and sele ct Selection Play . The option does not appear if a folder is highlighted by the cursor.
180 AllShare Play 10 10 AllShare Play 10.2.4 Creating a P laylist (Playlist) Create a list of files you want to play continuo usly. 1 Select files from the list of Videos , Photos , or Music files. 2 Press TOOL on the remot e control and sele ct Add to Playlist .
181 AllShare Play 10 10 AllShare Play 10.3 My List MENU [] Support Contents Home AllShare Play My List ENTER [] Access desired content more conveniently and quickly. To play files, select files or a playlist ( Playlist ) an d press [] . Recently Played : Display video, photo or music files tha t were recen tly played.
182 AllShare Play 10 10 AllShare Play 10.4 Videos MENU [] Support Contents Home AllShare Play Videos ENTER [] 10.4.1 Playing a Video 1 Select the intern al memory o r a USB device. Se lect a file fr om the list of f iles. 2 Press the [ ] button or [ ] (Play) button.
183 AllShare Play 10 10 AllShare Play 10.5 Photos MENU [] Support Contents Home AllShare Play Photos ENTER [] 10.5.1 Viewing a Phot o (or Slide Show) 1 Select the intern al memory o r a USB device. Se lect a file fr om the list of f iles. 2 Press the [ ] button.
184 AllShare Play 10 10 AllShare Play 10.6 Music MENU [] Support Contents Home AllShare Play Music ENTER [] 10.6.1 Playing Music 1 Select the intern al memory o r a USB device. Se lect a file fr om the list of f iles. 2 Press the [ ] button or [ ] (Pla y) button.
185 AllShare Play 10 10 AllShare Play 10.7 Videos / Photos / Music Play Option menu When playing video or phot o files, you can press t he TOOLS button to display an Opti ons menu. Below are a se ries of tables listing the optio ns available an d the me dia each optio n applies to.
186 AllShare Play 10 10 AllShare Play Pressing the INFO button while a device name is selected will display information about the selected device. Pressing the INFO button while a file is selected w ill display information about the selected file.
187 AllShare Play 10 10 AllShare Play 10.8 Supported Subtitle and A llShare Play file formats 10.8.1 Subtitle 10.8.2 Supported image resolutions 10.8.3 Supported music file formats External Internal MPEG-4 time d text (.ttxt ) SAMI (.smi) SubRip (.
188 AllShare Play 10 10 AllShare Play 10.8.4 Supported Video Formats *.flac FLAC FLAC The Seek (jump) fu nction is not supported. Support s up to 2 channel *.ogg OGG Vorbis Supports up to 2 channel *.wma WMA WMA Supports up to WMA 10 Pr o 5.1 channel.
189 AllShare Play 10 10 AllShare Play Video content will not play, or not play correctly, if there is an error in the content or the container. Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
190 11 MagicInfo Lite 11 MagicInfo Lite 11.1 File Formats Compatible with MagicInfo Lite Player [Read before usin g MagicInfo Lite Player ] The file system supports FA T16, FAT32 and NTFS. A file with a vertical and horizontal r esolution larger t han the maximum r esolution cannot be played.
191 MagicInfo Lite 11 11 MagicInfo Lite 11.1.1 Contents File Extension Cont ainer Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.flv *.vob *.svi *.m2ts *.
192 MagicInfo Lite 11 11 MagicInfo Lite Video Video content with out audio is n ot supported. 3D video is not supported . Content with a resolution larger than the resolu tion specified in the table above is not supported.
193 MagicInfo Lite 11 11 MagicInfo Lite Flash Compatible with Flash 10.1 Flash Animation Compatible file f ormat : SWF Resolution : 1280 x 72 0 Caution - Performance comparable to .
194 MagicInfo Lite 11 11 MagicInfo Lite PDF Compatible docume nt file format s Extension : pdf Functions not supporte d Content less than 1 pixel not supp orted becau se of performance de gradation issue. Masked Image, Tiled Imag e content not supp orted.
195 MagicInfo Lite 11 11 MagicInfo Lite 11.2 MagicInfo Lite Player 11.2.1 Network Schedule Connecting to a ser ver Network setup To run Ma gicInfo Li te , connect to a network. Refer to 126 page for details about the Networ k Settings menu. Server setup Go to MENU Network MagicI nfo Lite Settings Server .
196 MagicInfo Lite 11 11 MagicInfo Lite MagicInfo Lite Settings MENU [] Support Contents Home MagicInfo Lite ENTER [] Press the MagicInfo Lite button on the remote contro l. You can view wh ether the ser ver is connected (approval) in t he MagicInfo Lite menu screen.
197 MagicInfo Lite 11 11 MagicInfo Lite Approving a connected device from the server 1 Access the server you have assigned to your device. 2 Enter your ID and password to log in. 3 Select Device fr om the top menu bar. 4 Select Lite Device from the menus on the left.
198 MagicInfo Lite 11 11 MagicInfo Lite 5 Select View Unapproved Lite De vice from the sub -menus of Lite Device . 6 Select the Approve button for your device from the list of unapproved Lite devices. 7 Enter the in formation re quired to appr ove the device.
199 MagicInfo Lite 11 11 MagicInfo Lite For further details on how to configure a schedule, refer t o the <MagicInfo server user's manual>. If a device is delete d from the list of devices a pproved by the server, the device will reboot to reset its settings.
200 MagicInfo Lite 11 11 MagicInfo Lite 11.2.2 Local Schedule Run a schedule cr eated by Local Schedule Manager . Go to Local Schedule Manager Sele ct the co ntent you w ant to run This menu is disabled if there was no schedule run previously in Local Schedule Manager .
201 MagicInfo Lite 11 11 MagicInfo Lite 11.2.3 Internal AutoPlay Running Internal AutoPlay The option is enabled only when there is at least one content item, except for music files, in Internal Memory . 1 Select Internal AutoPlay in the MagicInfo Lite Player menu screen .
202 MagicInfo Lite 11 11 MagicInfo Lite 11.2.4 USB AutoPlay Running Internal AutoPlay The option is enabled only when there is at least one content item, except for music files, in USB AutoPlay . Ensure a USB device is inserted. Be sure to crea te a folder named "MagicInfoSlide" in the USB device and put content in the folder.
203 MagicInfo Lite 11 11 MagicInfo Lite 11.3 Local Schedule Manager Configure the se ttings for playbac k from Local Schedule . Alternatively, s elect and play content from internal or USB m emory acco rding to the customiz ed playback sequence . 11.3.
204 MagicInfo Lite 11 11 MagicInfo Lite 3 Select Time to set the tim e you wan t to play cont ent. A maximum of 24 schedules can be created. If more than one schedule is created, the start time must be different for each schedule.
205 MagicInfo Lite 11 11 MagicInfo Lite 5 Select Duration Specify the seq uence and time du ration to play content fil e s. Changing the pl aying sequence Select a cont ent file and change th e sequence u sing the Up or Down button. Duration Set the dura tion to play content.
206 MagicInfo Lite 11 11 MagicInfo Lite 7 Check that the schedule h as been ad ded to the Local Schedule Manager . Run Info Copy Create Edit Delete Close Local Schedule Manager Return Internal Memory Storage No Playing Schedule All Schedule 2012.01.01_1834.
207 MagicInfo Lite 11 11 MagicInfo Lite 11.3.2 Modifying a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local schedule you want to m odify. 3 Select Edit .
208 MagicInfo Lite 11 11 MagicInfo Lite 4 Change the d etails of the local schedu le. Next, se lect Save . Delete Cancel 12:00 am ~ 12:00 pm Menu1.jpg Menu2 T ime Content --:-- am ~ --:-- pm No Item T.
209 MagicInfo Lite 11 11 MagicInfo Lite 11.3.3 Deleting a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local schedule you want to d elete. Next, select Delete .
210 MagicInfo Lite 11 11 MagicInfo Lite 11.3.4 Running a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local sche dule you want to run. Next, se lect Run .
211 MagicInfo Lite 11 11 MagicInfo Lite 11.3.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from local schedule to network schedule. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen.
212 MagicInfo Lite 11 11 MagicInfo Lite 11.3.6 Viewing the detail s of a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite men u screen.
213 MagicInfo Lite 11 11 MagicInfo Lite 3 The details of the sc hedule will be disp layed. Information Return 2012.01.01_1834.lsch 12:00 am~12:00 pm, 2 File(s) - Menu1.
214 MagicInfo Lite 11 11 MagicInfo Lite 11.3.7 Copying a Local Schedule (Local Schedule) 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select a storage device where the lo cal schedule files to copy are saved. Internal Me mory : Copy local schedules from Internal Memory to a USB memory device.
215 MagicInfo Lite 11 11 MagicInfo Lite 3 Select local schedule files and press Copy . 4 A window appear s asking if you wa nt to copy the files to the Internal Memory or USB memory device. Select Yes to copy the files. Run Info Create Edit Delete Close Local Schedule Manager Return Internal Memory Storage No Playing Schedule All Schedule 2012.
216 MagicInfo Lite 11 11 MagicInfo Lite 11.4 Content Manager 11.4.1 Copying content 1 Select Content Mana ger in the Mag icInfo Li te menu screen . 2 Select the conten t you want to copy. Next, se lect Copy . If content under Internal Memory is selec ted: You ca n copy the content und er Internal Memory to USB memory .
217 MagicInfo Lite 11 11 MagicInfo Lite 11.4.2 Deleting content 1 Select Content Mana ger in the Mag icInfo Li te menu screen . 2 Select the cont ent you want to delete. Nex t, select Delete . Content un der Internal Memory and US B memory can be deleted at the sam e time.
218 MagicInfo Lite 11 11 MagicInfo Lite 11.5 Settings 11.5.1 Content Default Duration Specify the dura tion to play content. Image Viewer Time , PPT Viewer Time , PDF Vi ewer Time , Flash Viewer Time The duration must be at least 5 seconds. 11.5.2 Content Ratio Specify the display aspec t ratio by type when playin g content.
219 MagicInfo Lite 11 11 MagicInfo Lite 11.5.5 Screen Layout Change the s creen orie ntation to la ndscape or portrait view . Landscap e / Portrait 11.
220 MagicInfo Lite 11 11 MagicInfo Lite 11.6 When Content is Running 11.6.1 Viewing the details of the content that is running Press the INFO button on the remote control.
221 MagicInfo Lite 11 11 MagicInfo Lite 11.6.2 Changing the settings fo r the content that is running Press the TOOLS button on the remote control. You can chan ge the Picture Mode or Sound Mode setting or safely remove a USB device ( Safely Remove USB ) while content is playing by pressin g the TOOLS button o n the rem ote cont rol.
222 12 Troubleshooting Guide 12 Troubleshooting Guide 12.1 Requirements Before Co ntacting Samsung Customer Service Center 12.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center.
223 Troubleshooting Guide 12 12 Troubleshooting Guide 12.1.3 Check the followings. Installation issue (PC mode ) The screen keeps swit ching on and off. Check the cab le connec tion betwee n the product and PC, and e nsure the con nection is secure. ("2.
224 Troubleshooting Guide 12 12 Troubleshooting Guide The screen is not clear. The screen is blurry. Adju st Coarse and Fine . Remove any accessories (vid eo extension cable, etc) an d try again . Set the resolution and frequency to the recommended level.
225 Troubleshooting Guide 12 12 Troubleshooting Guide Remote control issue The remote con trol does not w ork. Make sure that the bat teries are cor rectly in place (+/ -). Check if the ba tteries are flat. Check for po wer failure. Make sure th at the pow er cord is connected .
226 Troubleshooting Guide 12 12 Troubleshooting Guide 12.2 Q & A Question Answ er How can I change the frequency? Set the frequ ency on you r graphics c ard. "Windows XP": Go to Control Panel Appearan ce and Themes Display Settings Advanced Monitor and adjust the fr equency in Monitor Settings .
227 Troubleshooting Guide 12 12 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment.. How can I change the resolution? "Windows XP": Go to Control Panel Appearanc e and Themes Display Settings and adjust the reso lution.
228 13 Specifications 13 Specifications 13.1 General Model Name DE40C Panel Size 40 inches (101 cm) Display area 885.6 mm (H) x 498.15 mm (V) 34.866 inches (H) x 19.612 inc hes (V) Dimensions (W x H x D) 919.6 x 532.0 x 35.1 mm 36.2 x 20.9 x 1.4 inches Weight 13.
229 Specifications 13 13 Specifications Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically.
230 Specifications 13 13 Specifications 13.2 PowerSaver The power-sa ving funct ion of this p roduct redu ces power c onsumption by switching off the scree n and changing the co lor of the pow er LED if the prod uct is not used for a specified period of tim e.
231 Specifications 13 13 Specifications 13.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality.
232 Specifications 13 13 Specifications Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
233 Specifications 13 13 Specifications 13.4 License Manufacture d under license fro m Dolby Lab oratories. Dolby and t he double-D symbol are trad emarks of Do lby Labora tories. Manufactured un der license unde r U.S. Patent #’s: 5,451,942; 5, 956,674; 5,974,380; 5,97 8,762; 6,487,53 5 & other U.
234 Appendix Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG (7 26-7864) h ttp://www.
235 Appendix Appendix GUATEMALA 1-800-299-001 3 h ttp://www.sam sung.com/latin (Spanish) http://www. samsung.co m/ latin_en (E nglish) HONDURAS 800-27919267 http://www.sam sung.com/latin (Spanish) http://www. samsung.co m/ latin_en (E nglish) JAMAICA 1-800-23 4-7267 http://www.
236 Appendix Appendix Responsibility for the Pay Se rvice (Cost to Customers) When the service is requested, in spite of in warra nty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustme nt, Explanation, Re-installation and etc .
237 Appendix Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality To enjoy the op timum picture quality, go to Control Panel on your PC and ad just the resolu tion and refresh rate as follows. Th e picture quality of TF T-LEDs may degr ade if the optimum resolution is not selected.
238 Appendix Appendix Prevention of Afterim age Burn-in What is afteri mage burn-in? Afterimage bu rn -in should not occur wh en the LCD pa nel is ope rating nor mally.
239 Appendix Appendix Powering Off, Screen Save r and Power Saving Mode Power off th e product fo r 2 hours a fter using it f or 12 hour s. Power off th e product fo r 4 hours a fter using it f or 20 hour s. Go to Display Properties > Power Supply on your PC and set the product to power off as required.
240 Appendix Appendix Terminology Dot Pitch The product and scree n consist of red, gree n and blue dots. A short er distance between t he dots produces a hig her resolutio n. Dot pitch ref ers to the distan ce between the shortest di stance betw een dots of the same color.
241 Appendix Appendix Multiple Display Control (MDC) MDC (Multiple Disp lay Control) is an ap plication that allows multiple displ ay devices to be cont rolled simultaneously using a PC. Commun ication between a PC and m onitor takes place using RS232C (serial data transmissio n) and RJ45 (LAN) cables.
Index 242 Index A Advanced Settin gs 113 AllShare Settings 137 Antenna 65 Antenna (Air/Cable) 123 Anynet+(HDMI-CEC) 162 Auto Adjustment 112 Auto Program 124 Auto Protection Time 152 B Batteries 33 Bef.
Index Index 243 N Network Setting 126 Network Status 134 No Signal Power Off 145 P Parts 28 PC connection 57 PC Module Power 166 Photos 183 Picture Mode 107 Picture Options 116 Picture Size 109 PIP 15.
Ein wichtiger Punkt beim Kauf des Geräts Samsung DE40C (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung DE40C noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung DE40C - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung DE40C reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung DE40C erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung DE40C besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung DE40C verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung DE40C. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung DE40C gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
