Benutzeranleitung / Produktwartung PE702 des Produzenten Audiovox
Zur Seite of 33
1 PE702 PORT ABLE 7" LCD MONITOR AND DVD PLA YER 1286823 WWW . audi ov ox . com For Customer Service Visit Our We bsite At Produ ct Informat ion, Phot os, F AQ’s Owner’s Manu al s.
2 Notice: This Product incorporates copyright protection technology that is pro- tected by method claims of certain patents and other intellectual prop- erty rights owned by Macrovision Corporation and other rights owners.
3 A. Introduction Thank you for selecting the PE702 portable DVD player . The main features include a 7" Wide Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player . The unit applies the latest state of the art electronics and is designed for use in hotels, offices or your home.
4 5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only . 6. Disc Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction.
5 1 2 Figure 1 E. Controls, Indicators, and Connectors 1. Unit V iew (Refer to Figure 2) Figure 2 BRI GHT . DC 9 V VIDEO AUDIO IN OUT 1 2 3 45 6 7 8 9 10 14 16 15 11 13 12 18 20 19 21 23 22 17 24 26.
6 1) Menu 2) Up button 3) Left Button 4) OK Button 5) Down Button 6) Right Button 7) Close disc cover point 8) Open Button 9) Previous Button 10) S top Button 1 1) Next Button 12) Play Button 13) Paus.
7 2. Remote Control V iew (Refer to Figure 3) 1) Display Button 2) Angle Button 3) Subtitle Button 4) Audio Button 5) Zoom Button 6) Up/Down/Left/Right/Enter Buttons 7) Return Button 8) A-B Button 9) .
8 G . SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu. Figure 4. Main SETUP Menu Screen 1) Select ‘GENERAL SETUP’ using the Left /Right buttons, then press ‘ENTER’ to enter the GENERAL Setup screen.
9 and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen. * WIDE: When the player is connected to a wide screen TV , a wide picture is shown on the full screen. Figure 6. TV DISPLA Y Screen Display c). Select ‘ANGLE MARK’ using UP/DOWN, and then press the RIGHT button to enter the submenu.
10 *ON: screen saver on. *OFF: screen saver off. *NOTE The DVD player will enter the Screen Saver mode after 5 minutes if the image on the screen remains the same for more than 5 minutes. e). Select “ Last Memory’ by Up/Down button Figure 9. LAST MEMOR Y Screen Display *on: The unit will retain the last position of playback in memory .
11 .. V ide o Q ua lit y S etu p .. Br i ght nes s Hue Cont r ast S a tu r a tio n 00 -05 00 00 Cont r ast .. V ide o Q ua lit y S e tu p .. Br i ght nes s Hue Cont ras t S a tu r a tio n 00 -05 00 00 Hue .. V ide o Q ua lit y S etu p .. Br i ght nes s Hue Cont r ast S a tu r a tio n 00 00 00 00 Br i ght nes s Figure 1 1.
12 Figure 14. SA TURA TION Screen Display When complete, press “Enter”again to return to the “Video Quality” setup page. e) Press Setup button to exit “Video Quality” setup page. 3). W ith no disc in the player , select “password” using the left/ right buttons; then press Enter to enter the “Change Pass word” page.
13 4).With no disc in the player , select ‘PREFERENCES’ using the left/right buttons; then press ‘ENTER’ to enter the preferences page. Figure 17. AUDIO Preference Screen Display a. Select ‘AUDIO’ using UP/DOWN, then press ‘RIGHT’ to enter the submenu.
14 c. Select ‘DISC MENU’ using UP/DOWN, then press ‘RIGHT’ to enter the submenu. Select the Disc Menu Language you desire using UP/DOWN, then press ‘ENTER’ to confirm the setting.
15 Figure 21. DEF AUL T RESET Screen Display Enter a 4 digit password, then press ‘ENTER’ to confirm the parental level setting. NOTE: For 1st time use the default password is 3308. Figure 22. P ASSWORD VERIFY Input Screen Display . . Pr ef er enc e Pag e .
1. Basic Operation T urn the unit on/off Remove/load the disc S tart Play/Execute item or setting Play at 1/2, 1/4, 1/8 or 1/16 times speed S till Picture (1 time) S top at the present playing point /.
2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor . The content s of the menu vary from disc to disc. Press MENU during playback to display the menu, and press ENTER or PLA Y to start playing.
18 c. Press ‘DISPLA Y’ the 3rd time to display the Elapsed T ime for the chapter . The heading will disappear automatically in about 3 seconds. d. Press ‘DISPLA Y’ the 4th time to display the Remaining T ime for the chapter . The heading will disappear automatically after 3 seconds.
19 3) SUBTITLE During disc playback press ‘SUBTITLE’ to select the subtitle lan- guage you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language.
20 4) AUDIO During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed again for 3 seconds.
21 6) A-B REPEA T a. During playback press ‘A-B’ to set the Starting Point A. Figure 31. A-B Repeat St arting Point Screen Display b. Press ‘A-B’ a second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B Figure 33.
22 7) REPEA T a. During playback press ‘REPEA T’ once to repeatedly play the current chapter . Figure 34. Chapter Repeat ON Screen Display b. During playback press ‘REPEA T’ a second time to repeatedly play the current title. Figure 35. Title Repeat ON Screen Display c.
23 d. Press “REPEA T” a fourth time to resume normal playback. Figure 37. Repeat Off Screen Display 4. PLA YING AUDIO CDS When playing an audio CD. Press the DISPLA Y button on the remote to display the DISPLA Y Banner . The options below show you what happens when you press the DISPLA Y button.
24 d. Press ‘DISPLA Y’a fourth time and TOT AL REMAIN appears along with the current track playing and the amount of time remaining on the CD. Figure 41. TO T AL REMAIN Screen Display e. Press ‘DISPLA Y’ a fifth time and “ DISPLA Y OFF” will appear momentarily then disappear .
25 1. Insert an MP3 CD, the DVD video player will initialize the disc and the directory will be shown on the monitor . Figure 42. MENU Screen Display When an MP3 disc is inserted into the unit, the menu screen appears automatically . Y ou can use the menu screen to change folders and songs.
26 SKIPPING SONGS Use the ( NEXT ) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the previous song. USING THE REPEA T FEA TURE The default mode for the Repeat feature is OFF .
27 NOTICE The upper lef t column is a list showing the name of folder . The upper right column is a list showing the name of song and the sub-folder . “ “ sign in front of a file name indicates that this is a folder , not an MP3 file. “MP3” sign in front of a file name indicates that this is a MP3 file.
28 7. When previewing the file, pressing “ANGLE,SUBTITLE,AUDIO, NUMBER, AB,RETURN,REW/FF , or SLOW” causes a hand icon (invalid function) to appear on the display . 8. When pressing the first time during preview , “SLIDE SHOW MENU” will display on the screen.
29 control and the brightness control on the monitor for individual preference. Figure 43 8. Connecting to a TV or another monitor ( Refer to Figure 38) You can also connect the DVD player to a TV to enjoy high quality stereo sound or another monitor.
30 10. Specifications Disc format: DVD/CD/MP3 Color system: NTSC Screen size: 7.0’’ DVD video format: Horizontal 720 pixel, vertical 480 pixel (NTSC) Frequency response: DVD (PCM 96 kHz/24 bits ): 20 Hz to 44 kHz DVD (PCM 48 kHz): 20 Hz to 22 kHz CD: 20 Hz to 20 kHz Video output: 1.
31 NOTE: When the DVD player is used with the battery as a power source, ensure that the battery has been charged for at least eight hours prior to connecting it to the DVD player .
32 Removing the Battery Pack: 1. First, make sure the player is in “Stop” mode and that the AC power supply has been disconnected. 2. Press the release button in the down direction.
33 AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail pur- chaser of this product that should this product or any part thereof, under normal use and conditions, be proven defecti.
Ein wichtiger Punkt beim Kauf des Geräts Audiovox PE702 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Audiovox PE702 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Audiovox PE702 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Audiovox PE702 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Audiovox PE702 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Audiovox PE702 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Audiovox PE702 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Audiovox PE702. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Audiovox PE702 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
