Benutzeranleitung / Produktwartung TD-20 des Produzenten Roland
Zur Seite of 112
As of January 15, 2005 (ROLAND) Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.
To resize thickness, move all items on the front cover This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For EU Countries Apparatus containing Lithium batteries ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering.
3 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. ................................................................................................ 001-50 • Connect mains plug of this model to a mains socket outlet with a protective earthing connection.
4 012a: • Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as li.
5 IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2–4, please read and observe the following: Power Supply 301.
6 IMPORTANT NOTES Additional Precautions 551 • Please be aware that the contents of memory can be irretrievably lost as a result of a malfunction, or the improper operation of the unit.
7 Contents USING THE UNIT SAFELY ........................................................................3 IMPORTANT NOTES ..................................................................................5 Features ...................................
8 Contents Adjusting the Volume [F1 (VOLUME)]............................................................... 29 Assigning a Tempo for Each Kit [F2 (TEMPO)] ................................................. 29 Playing Brushes [F3 (BRUSH)] .............
9 Contents Detecting Trigger Signal Attenuation (Retrigger Cancel) ................................ 48 Double Triggering Prevention (Mask Time)....................................................... 49 Rim/Edge Dynamic Response (Rim Gain) ............
10 Contents Chapter 10. Settings for the Entire TD-20 [SETUP] ..............................74 MIDI Settings and Operations [F1 (MIDI)] .................................................................... 74 Setting the MIDI Channels for Each Part [F1 (MIDI CH)] .
11 An Overview of the TD-20 Features The TD-20 follows in the foot steps of the industry standard TD-10, taking advantage of even more powerful COSM technology. Velocity, position, and interval of each hit are detected precisely, providing real and natural dynamics.
12 Features Each instrument assigned to trigger 1–15 head and rim inputs has an individual three-band equalizer and compressor(p. 38). There is also a multi-effects unit with reverbs, delays, flanger, chorus, pitch shifter, phaser, ring modulator, overdrive, etc.
13 An Overview of the TD-20 Panel Descriptions fig.top 1. Trigger Level Indicator This lights up and moves each time a trigger signal is received from a pad. It monitors the pad connection and is helpful when customizing trigger parameters. 2. LED Display Displays the Kit number (currently selected drum kit).
14 Panel Descriptions 7. CARD Button For access to (Compact Flash) memory card functions such as saving/loading data etc. (p. 70) 8. SETUP Button For access to functions that affect the TD-20 globally, such as MIDI parameters etc. (p. 74) 9. TRIGGER Button For access to trigger parameters (p.
15 Panel Descriptions An Overview of the TD-20 fig.rear_50 1. POWER Switch This switch turns the power on/off. 945 * If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. Refer to Power Supply (p.
16 Panel Descriptions fig.front 1. PHONES Jack A pair of stereo headphones can be connected to this jack. Connecting the headphones will not mute the output from the MASTER OUT jacks (p. 19). 2. CompactFlash Card Slot Accepts a CompactFlash memory card (optional).
17 An Overview of the TD-20 Setting Up the Kit 1. Attach the stand holder (included with the optional drum stand) to the TD-20. Using the screws attached to the bottom panel, attach the holder so the unit is oriented as shown in the diagram. * ONLY use the 12 mm screws (M5 x 12) provided with the TD-20.
18 Setting Up the Kit Using the provided cables, connect the pads, cymbals, hi-hat, and kick trigger. * When mounting a TD-20 on an MDS-20 drum stand, use the built-in connection cables. Set Up Example fig.Kit.e The HI-HAT and RIDE cymbal use two cables each.
19 Setting Up the Kit An Overview of the TD-20 fig.Connect.e 1. Turn off the power of all devices before you make connections. 921 * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
20 Setting Up the Kit 941 * Once the connections have been completed (p. 18, p. 19), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
21 Setting Up the Kit An Overview of the TD-20 When using the VH-12, the “VH Offset” needs to be set up. 1. Loosen the clutch of the top hi-hat and let it sit on the bottom hi-hat. * Do NOT touch the hi-hats or the pedal. 2. Hold down [KIT] and press [TRIGGER].
22 Listening to the Demo Song The internal demo song features the TD-20’s expressive capabilities and top quality sounds. The drums on this song were recorded from the TD-20 system to a sequencer in real time. 1. Press [CHAIN] and [TOOLS] simultaneously.
23 An Overview of the TD-20 Button Operation and Displays Operations common to all aspects TD-20 operations. Every time you change a value during the editing process, it’s automatically stored in the TD-20’s memory. There’s no “write/save” process.
24 Button Operation and Displays fig.00-009 Use [GROUP FADERS] sliders to adjust the volume. If you press the [FADER] button, the function of the faders will change as is explained in the chart below. An LED will light up at the upper and lower right of the faders to indicate which set of sounds is active.
25 Button Operation and Displays An Overview of the TD-20 fig.06-003_70 Pressing [PATTERN]. The basic screen for the sequencer appears. Press [+/-] or turn [VALUE] in this screen to choose a pattern. Or press [F1 (LIST)] to choose from the pattern list.
26 Playing Methods fig.Play-Head.e Head Shot Hit only the head of the pad. With certain snare sounds, playing position will change the nuance of the sound. fig.Play-Rim.e Rim Shot Strike the head and the rim of the pad simultaneously. fig.Play-Cross.e Cross Stick Only strike the rim of the pad.
27 Playing Methods An Overview of the TD-20 Bow Shot This is the most common playing method, playing the middle area of the cymbal. It corresponds to the sound of the “head- side” of the connected trigger input. fig.Play-CYBow Edge Shot This playing method involves striking the edge with the shoulder of the stick.
28 Chapter 1. Drum Kit Settings [KIT] 1. Press [KIT]. [KIT] lights, and the “DRUM KIT” screen appears. fig.01-001*_70 2. Use [+/-] or [VALUE] to select drum kits.
29 Chapter 1. Drum Kit Settings [KIT] Chapter 1 [KIT] 1. Press [KIT] - [F2 (FUNC)]. 2. Press [F1]–[F3] and [CURSOR (up/down)] to select the parameter. 3. Use [+/-] or [VALUE] to make settings. fig.01-003_70 Each kit can have an individual tempo setting.
30 Chapter 1. Drum Kit Settings [KIT] Each kit’s name can use up to 12 characters. fig.01-005_70 1. Press [KIT] - [F3 (NAME)]. The “DRUM KIT NAME” screen appears. 2. Press [CURSOR (left/right)] to move the cursor to the character to be changed. 3.
31 Chapter 2 [INST] Chapter 2. Drum Instrument Settings [INST] Here’s how to select and edit sounds, such as the snare drum and kick drum. There are two basic ways to select the sound you want to edit. 1. Press [INST]. [INST] lights, and the “INST” screen appears.
32 Chapter 2. Drum Instrument Settings [INST] Here you can select from the list of all available instruments. fig.02-003_70 1. Press [INST] - [F1 (LIST)]. The “INST LIST” screen appears. 2. Strike a pad. The settings screen for the struck pad appears.
33 Chapter 2. Drum Instrument Settings [INST] Chapter 2 [INST] KICK fig.02-KICK_70 SNARE fig.02-SNARE_70 TOM fig.02-TOM_70 * PINSTRIPE is a registered trademark of Remo Inc., U.S.A. HI-HAT fig.02-HIHAT_70 * NORMAL: The gap between the top and bottom hi-hat is controlled by the pedal.
34 Chapter 2. Drum Instrument Settings [INST] CRASH/SPLASH/CHINA/RIDE fig.02-CYM_70 Other Instruments fig.02-005_70 You can edit the instruments of the head and rim simultaneously. Pressing [F5 (H & R)], you can choose to set the head and rim simultaneously or individually.
35 Chapter 2. Drum Instrument Settings [INST] Chapter 2 [INST] 1. Press [INST] - [F3 (CONTROL)]. 2. Strike a pad. The settings screen for the struck pad appears. You can select by using [TRIG SELECT]. 3. Press [F1]–[F5] and [CURSOR (up/down)] to select the parameter.
36 Chapter 2. Drum Instrument Settings [INST] Tx Channel: CH1–CH16, GLOBAL MIDI transmit channel for each pad. GLOBAL: Transmits on the same channel as the drum kit part (p. 74). Note No.: 0 (C -)–127 (G 9), OFF OFF: Note messages are not transmitted.
37 Chapter 3 [MIXER] Chapter 3. Mixer Settings Here you can adjust the volume, pan, etc. fig.03-001_70 1. Press [MIXER]. [MIXER] lights. 2. Use [F1]–[F5] or [CURSOR (up/down)] to select the parameter. 3. Use TRIG SELECT [1], [15], [RIM], or [CURSOR (left/right)] to select the instrument you wish to set.
38 Chapter 4. Effect Settings These switches allow you to turn all individual effects and master effects on/off within each drum kit. fig.04-001_70 1. Press [EFFECTS SWITCH]. [EFFECTS SWITCH] lights, and the “EFFECTS SWITCH” screen appears. 2. Press [F1]–[F5] to turn the following on/off.
39 Chapter 4. Effect Settings Chapter 4 [EFFECTS] A compressor adjusts the envelope (changes in the volume over time) and changes the character of the sound in response to playing dynamics. fig.04-003_70 For more detailed setting, adjust the parameters below.
40 Chapter 4. Effect Settings You can choose the type of room where the drums are to be played and modify the sound. fig.04-005_70 1. Press [AMBIENCE]. [AMBIENCE] lights. 2. Press [F2]–[F4] or [CURSOR] to select the parameter. 3. Use [+/-] or [VALUE] to adjust the setting.
41 Chapter 4. Effect Settings Chapter 4 [EFFECTS] REVERB Adds reverberation to the sound, simulating an acoustic space. GATE REVERB This is a special type of reverb in which the reverb is cut off without being allowed to decay naturally. DELAY Adds the delay sound.
42 Chapter 4. Effect Settings FLANGER Produces a metallic resonance that rises and falls somewhat like a jet airplane taking off or landing. PHASER Adds a phase-shifted sound to the original sound, producing a swirling modulation. CHORUS Gives richness and spaciousness to the sound.
43 Chapter 4. Effect Settings Chapter 4 [EFFECTS] LO-FI Intentionally degrades the sound quality for creative purposes. RING MOD Applies amplitude modulation (AM) to the input signal, producing bell-like sounds. A stereo compressor (limiter)/three-band equalizer provides final audio touches to the total sound of the TD-20.
44 Chapter 5. Trigger Settings [TRIGGER] To be sure the TD-20 accurately receives signals sent from the pads, select the trigger type (the type of pads being used) for each trigger input. Trigger Type A trigger type is a group of trigger settings with values optimally adjusted for a particular pad.
45 Chapter 5. Trigger Settings [TRIGGER] Chapter 5 [TRIGGER] When you are using pads made by other manufacturers, try adjusting the following parameters. 1. Press [TRIGGER] - [F2 (BASIC)]. [TRIGGER] lights, and the “TRIGGER BASIC” screen will appear.
46 Chapter 5. Trigger Settings [TRIGGER] 1. Press [TRIGGER] - [F3 (HI-HAT)]. [TRIGGER] lights, and the “TRIGGER HIHAT” screen will appear. fig.05-TrigHH_70 2. Use [CURSOR (up/down)] to select the parameter. 3. Use [+/-] or [VALUE] to adjust the setting.
47 Chapter 5. Trigger Settings [TRIGGER] Chapter 5 [TRIGGER] 5. Set the trigger type for hi-hat to “VH11” (p. 44). 6. Press [TRIGGER] - [F3 (HI-HAT)]. * The “TRIGGER HI-HAT” screen appears. 7. Set the TD-20’s parameters as described below. 8.
48 Chapter 5. Trigger Settings [TRIGGER] The following parameters (Advanced Trigger Parameters) are automatically set to the most efficient values for each pad when you select the Trigger Type (p. 44), and don’t require adjustment, except if you experience any of the problems that are discussed in the explanation of each parameter.
49 Chapter 5. Trigger Settings [TRIGGER] Chapter 5 [TRIGGER] You can also eliminate this problem of retriggering with the Mask Time setting. Mask Time does not detect trigger signals if they occur within the specified amount of time after the previous trigger signal was received.
50 Chapter 5. Trigger Settings [TRIGGER] When using the CY-15R or CY-12R/C for the RIDE, you can three way triggering (bow, bell, and edge shot) performance are possible. 3Way Trigger: OFF, ON Connect as shown below, set 3Way Trigger to “ON.” fig.
51 Chapter 6 [PLAY] Chapter 6. Sequencer (Playback) The TD-20’s sequencer organizes music into six parts. The Drum Kit part is used to record/play back what is played on the pads. Additionally, Melody Part, Bass Part, Backing 1 Part, and Backing 2 Part are the four backing instrument parts, and there is another Percussion part.
52 Chapter 6. Sequencer (Playback) fig.06-003_70 1. Press [PATTERN]. [PATTERN] lights, and the “PATTERN” screen appears. 2. Use [+/-] or [VALUE] to select the pattern. * If you press [F5 (NEW)], an empty pattern with the lowest number is called up.
53 Chapter 6. Sequencer (Playback) Chapter 6 [PLAY] 1. Press [TEMPO]. 2. [TEMPO] lights, and the “TEMPO” screen appears. fig.06-Tempo1_70 3. Use [+/-] or [VALUE] to select the tempo.
54 Chapter 6. Sequencer (Playback) PATTERN PART screen (Only for User Pattern) fig.06-Part_70 You can mute specific parts in user patterns. 1. Press [PATTERN] - [F2 (PART)]. The “PATTERN PART” screen appears. 2. Press [F1 (MUTE)]. The “PART MUTE” screen appears.
55 Chapter 6. Sequencer (Playback) Chapter 6 [PLAY] Here you can adjust the overall tuning for the Melody, Bass, Backing 1, and Backing 2 part. 1. Press [PATTERN] - [F2 (PART)] - [F2 (BACKING)] - [F5 (M TUNE)]. The “MASTER TUNE” screen appears. fig.
56 Chapter 6. Sequencer (Playback) Selecting a Percussion Instrument from the List [F1 (LIST)] Here you can select from the list of all available instruments. 1. Press [CURSOR (up/down)] to select the note number you wish to set. 2. Press [F1 (LIST)].
57 Chapter 6. Sequencer (Playback) Chapter 6 [PLAY] * Drum part cannot be set here. Set in the MIXER settings (p. 37). * To adjust volume/pan settings for each instrument of the percussion part, refer to p. 55. 1. Press [PATTERN] - [F2 (PART)]. The “PATTERN PART” screen appears.
58 Chapter 6. Sequencer (Playback) Set various settings for the user patterns. 1. Press [PATTERN]. The “PATTERN PART” screen appears. 2. Press [F3 (FUNC)] - [F1 (SETUP)]. The “PATTERN SETUP” screen appears. fig.06-PtnSetup_70 3. Press [CURSOR] to select the parameter.
59 Chapter 6. Sequencer (Playback) Chapter 6 [PLAY] Each pattern can be named (up to 12 characters). fig.06-PtnName_70 1. Press [PATTERN] - [F3 (FUNC)] - [F5 (NAME)]. [PATTERN] lights, and the “PATTERN NAME” screen appears. 2. Press [CURSOR (left/right)] to move the cursor to the character to be changed.
60 Chapter 6. Sequencer (Playback) 1. Press [TEMPO] - [F1 (CLICK)]. The “CLICK SETTINGS” screen appears. fig.06-Click5_70 2. Press [CURSOR] to select the parameter. 3. Use [+/-] or [VALUE] to make settings. To adjust the click level, move [GROUP FADERS] - [CLICK] (p.
61 Chapter 7 [REC] Chapter 7. Sequencer (Recording/Editing) What is played on the pads or on an external MIDI keyboard can be recorded (Realtime Recording). Your performance will be recorded exactly as you play it, including hi-hat control pedal movements and Positional Sensing.
62 Chapter 7. Sequencer (Recording/Editing) (2) Set the Time Signature, the Number of Measures, and the Tempo 1. In the “PATTERN” screen, press [F3 (FUNC)] - [F1 (SETUP)]. The “PATTERN SETUP” screen appears. fig.07-Rec2-1_70 2. Press [CURSOR] to select the parameter.
63 Chapter 7. Sequencer (Recording/Editing) Chapter 7 [REC] (5) Set the Recording Method 1. In the “PATTERN” screen, press [REC]. [PLAY] flashes, and [REC] lights. The “PATTERN REC STANDBY” screen appears, and the click sound begins to play. fig.
64 Chapter 7. Sequencer (Recording/Editing) You can edit user patterns. PATTERN EDIT screen (Preset Pattern) fig.07-PrstEdit_70 PATTERN EDIT screen (User Pattern) fig.07-UserEdit_70 Copy the pattern as is to the User patterns. fig.07-Cpy1 You can copy selected measures of a part or pattern.
65 Chapter 7. Sequencer (Recording/Editing) Chapter 7 [REC] This connects two patterns to create one pattern. The pattern specified as “Dst” will be first, and the pattern specified as “Src” will be connected to it. The new pattern will be created in “Dst.
66 Chapter 7. Sequencer (Recording/Editing) 6. Press [F5 (ERASE)]. The confirmation screen appears. fig.07-Ers5_70 7. Press [F5 (EXECUTE)]. * To cancel, press [F1 (CANCEL)]. This deletes the pattern performance, beat, measure length, part, and all other settings, creating a empty pattern.
67 Chapter 7. Sequencer (Recording/Editing) Chapter 7 [REC] You can use an optional CompactFlash memory card to save pattern data. PATTER CARD screen fig.07-PtnCard_70 Cards supported by TD-20 are 3.3 V CompactFlash cards with the capacity of 16 to 512 MB.
68 Chapter 7. Sequencer (Recording/Editing) Loading a Pattern from a Memory Card [F2 (LOAD)] Patterns saved on a memory card can be loaded into the TD- 20. 1. Insert a CompactFlash card into the CompactFlash card slot on the TD-20’s front panel. 2. Press [PATTERN] - [F4 (EDIT)].
69 Chapter 8 [COPY] Chapter 8. Copy Function [COPY] You can copy drum kits, instruments, etc. to the destination of your choice. Copying will overwrite the data that was in the new destination. So take caution when performing this operation. 1. Press [COPY].
70 Chapter 9. Using a CompactFlash Memory Card [CARD] You can use an optional CompactFlash memory card to save TD-20 settings and sequencer data. CARD MENU screen fig.09-CardMenu_70 Cards supported by TD-20 are 3.3 V CompactFlash cards with the capacity of 16 to 512 MB.
71 Chapter 9. Using a CompactFlash Memory Card [CARD] Chapter 9 [CARD] Each backup area can be given a name of up to 12 characters. 1. In the “CARD SAVE” confirmation screen, press [F4 (NAME)]. The “CARD SAVE NAME” screen appears. fig.09-CardName_70 2.
72 Chapter 9. Using a CompactFlash Memory Card [CARD] You can delete the unneeded data from a memory card. 1. Insert the CompactFlash card into the CompactFlash card slot on the TD-20’s front panel. 2. PRESS [CARD]. [CARD] AND the CompactFlash indicator light, and the “CARD MENU” screen appears.
73 Chapter 9. Using a CompactFlash Memory Card [CARD] Chapter 9 [CARD] 1. Insert a CompactFlash card into the CompactFlash card slot on the TD-20’s front panel. 2. PRESS [CARD]. [CARD] AND the CompactFlash indicator light, and the “CARD MENU” screen appears.
74 Chapter 10. Settings for the Entire TD-20 [ SETUP] For each part, you can specify the channel on which the TD-20 will receive and transmit MIDI messages. 1. Press [SETUP]. [SETUP] lights. 2. Press [F1 (MIDI)] - [F1 (MIDI CH)]. The “MIDI CHANNEL” screen appears.
75 Chapter 10. Settings for the Entire TD-20 [SETUP] Chapter 10 [SETUP] Local Control This is required when you want to trigger sounds in an external sound module and/or record your performance on an external MIDI sequencer, and NOT use the TD-20’s internal sounds.
76 Chapter 10. Settings for the Entire TD-20 [SETUP] 1. Press [SETUP]. [SETUP] lights. 2. Press [F1 (MIDI)] - [F3 (CTRL)]. The “MIDI CONTROL” screen appears. fig.10-MidiCtrl_70 3. Press [CURSOR (up/down)] to select the parameter. 4. Use [+/-] or [VALUE] to make settings.
77 Chapter 10. Settings for the Entire TD-20 [SETUP] Chapter 10 [SETUP] Saving Data To save data, use the external sequencer as you would when recording musical data, and perform the following steps on the TD-20 as shown in the following diagram.
78 Chapter 10. Settings for the Entire TD-20 [SETUP] Here you can select the output destination for each TRIGGER INPUTs, sequencer parts, and the sound input from the MIX IN jack. 1. Press [SETUP]. [SETUP] lights. 2. Press [F2 (OUTPUT)], and then Press [F1]–[F3] to select the output destination jacks.
79 Chapter 10. Settings for the Entire TD-20 [SETUP] Chapter 10 [SETUP] Two foot switches (BOSS FS-5U, optional) can be used with an optional cable (PCS-31) to switch drum kits and play back patterns. fig.FootSw.e o: Functions –: Does not function 1.
80 Chapter 10. Settings for the Entire TD-20 [SETUP] Pads connected to TRIGGER INPUT 15 (AUX4) and/or 14 (AUX3) can be set to switch drum kits and play back patterns. 1. Connect the pad(s) to the TRIGGER INPUT 15 (AUX 4) and/or 14 (AUX3). 2. Press [SETUP].
81 Chapter 10. Settings for the Entire TD-20 [SETUP] Chapter 10 [SETUP] 2. Press [F4 (OPTION)] - [F2 (COMP/EQ)]. The “MASTER COMP/EQ MODE” screen appears. fig.10-Master_70 3. Use [+/-] or [VALUE] to make settings. INDIVIDUAL: Master effect for each kit, individually.
82 Chapter 11. Drum Kit Chain [CHAIN] Drum Kit Chain allows you to step through the drum kits of your choice and in the order you want. The TD-20 lets you create and store 16 different chains of up to 32 steps each. fig.11-001e 1. Press [CHAIN] to switch Drum Kit Chain on.
83 Chapter 11. Drum Kit Chain [CHAIN] Chapter 11 [CHAIN] Each chain’s name can use up to 12 characters. fig.11-ChainName_70 1. Select the drum kit chain you want to name in the “DRUM KIT CHAIN” screen. 2. Press [F1 (C EDIT)] - [F5 (NAME)]. The “CHAIN NAME” screen appears.
84 Chapter 12. Other Functions [TOOLS] 1. Press [TOOLS] - [F1 (MONITOR)]. [TOOLS] lights, and the “OUTPUT MONITOR” screen appears. fig.12-Monitor_70 2. Use [+/-] or [VALUE] to select the output. Choose from: Master, Phones, and separate stereo outs.
85 Chapter 12. Other Functions [TOOLS] Chapter 12 [TOOLS] Turning V-LINK On/Off 1. Press [TOOLS]. [TOOLS] lights, and the “TOOLS” screen appears. fig.12-Tools_70 2. Press [F5 (V-LINK)] to turn the V-LINK function ON and OFF. fig.12-VLinkOn1_70 * Before turning V-LINK on, turn the Edirol DV-7PR’s power on.
86 About Expansion Board Expansion boards (optional) are cards that allow you to upgrade the system and add new instruments and drum kits. The bottom panel of the TD-20 has a slot that allows expansion boards to be installed. Install only the specified circuit board (SOUND & SYSTEM EXPANSION BOARD for TD-20).
87 About Expansion Board Appendices 4. While positioning the holes on the board over the board holders, carefully insert the connector on the board into the socket on the TD-20. Make sure the connector is securely connected, and that all three board holders project through the holes.
88 À propos des carte d’extension Les cartes d’extension (optionnelles) sont des cartes qui vous permettent d’augmenter la puissance de votre système et d’ajouter de nouveaux instruments ainsi que des batteries. Le panneau du dessous du TD-20 a un créneau permettant l’installation des cartes d’extension.
89 À propos des carte d’extension Appendices 4. Pendant que vous alignez les trous de la carte au-dessus des supports, insérez délicatement le connecteur sur la carte dans la prise du TD- 20. Assurez-vous que le connecteur est raccordé correctement et que les trois supports s’emboîtent bien dans les trous.
90 Messages and Error Messages This section lists the messages (error messages) that the TD-20 produces and explains the meaning of each message, giving you the appropriate action to take. fig.Message_70 When an indication of “ACCEPT” is shown above [F5] as in the figure, pressing that button will close the message window.
91 Messages and Error Messages Appendices BULK DUMP Receive Address Error! The receive address of a system exclusive message was incorrect. Correct the receive address.
92 Drum Instrument List No. Name Remark KICK 1 22”Birch K 2 22”Solid K 3 22”StdMple K 4 22”Maple K 5 24”Carbon K 6 22”CbnMple K 7 22”GT K 8 22”TitanHp K 9 22”Mahogny K 10 20”Lite K.
93 Drum Instrument List Appendices No. Name Remark TOM 151 12”Birch T1 152 12”Birch T1R *P 153 13”Birch T2 154 13”Birch T2R *P 155 16”Birch T3 156 16”Birch T3R *P 157 18”Birch T4 158 18.
94 Drum Instrument List No. Name Remark SPLASH 331 6”SplazhSpBw 332 6”SplazhSpEg 333 8”Thin SpBw 334 8”Thin SpEg 335 8”Bell SpBw 336 8”Bell SpEg 337 8”Open SpBw 338 8”Open SpEg 339 10.
95 Drum Instrument List Appendices No. Name Remark OTHER 513 Click 514 Beep 515 Sticks 516 Sticks2 517 MetroBell 518 MetroClick 519 FingerSnaps 520 Clap 521 R8Slap 522 Motor 523 Engine 524 Glass 525 B.
3 4 5 7 9 11 6 8 10 15 16 17 19 21 23 18 20 22 12 14 13 27 28 29 31 33 35 30 32 34 24 26 25 39 40 41 43 45 47 42 44 46 36 38 37 51 52 53 55 57 59 54 56 58 48 50 49 C0 C1 C2 C3 2 0 C-1 1 Note No .
63 64 65 67 69 71 66 68 70 75 76 77 79 81 83 78 80 82 72 74 73 123 124 120 122 121 87 88 89 91 93 95 90 92 94 84 86 85 99 100 101 103 105 107 102 104 106 96 98 97 111 112 113 115 117 119 114 116 118 108 110 109 C5 C6 C7 C8 C9 62 125 127 126 60 C4 61 Note No .
98 Backing Instrument List PC CC0 Name VOICES PIANO 1 0 PIANO 1 1 8 PIANO 1W 2 16 PIANO 1D 1 2 0 PIANO 2 1 8 PIANO 2W 2 3 0 PIANO 3 1 8 PIANO 3W 2 4 0 HONKY-TONK 2 8 HONKY-TONK W 2 E. PIANO 5 0 E.PIANO 1 1 8 DETUNED EP 1 2 24 60’S E.PIANO 1 64 FM+SA EP 2 65 HARD EP 2 6 0 E.
99 Backing Instrument List Appendices SYN. BRASS 63 0 SYNTH BRASS1 2 8 SYNTH BRASS3 2 16 ANALOGBRASS1 2 64 SYNTH BRASS5 2 65 POLY BRASS 2 66 QUACK BRASS 2 67 OCTAVE BRASS 2 64 0 SYNTH BRASS2 2 8 SYNTH.
100 MIDI Implementation Chart Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Program Change System Exclusive System Common System Real Time Aux Messages No.
101 Appendices Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Program Change System Exclusive System Common System Real Time Aux Messages Notes Transmitted.
102 Specifications TD-20: Percussion Sound Module Sound Generator Variable Drum Modeling Maximum Polyphony 64 Voices Instruments Drum Instruments: 560 Backing Instruments: 262 Drum Kits 50 Drum Kit Ch.
103 Specifications Appendices Connectors Trigger Input Jack x 15 Hi-Hat Control Jack (VH-12, FD-7, FD-8) Master Output Jacks (L/MONO, R) Direct Output Jack x 8 Digital Output Jack (COAXIAL) Headphones.
104 INST BACK 2 REV Send Volume INST INST INST INST INST 14 AUX3 15 AUX4 Volume Volume Head Rim INST INST INST INST INST INST INST INST 1 KICK 2 SNARE 3 TOM1 : 6 TOM4 7 HI-HAT 8 CRASH1 9 CRASH2 10 RID.
105 Appendices CHO Send MULTI EFFECTS MIXER /PAN SETUP /OUTPUT /MASTER SETUP /OUTPUT /DIRECT SETUP /OUTPUT /OTHER MFX Send MFX Send MFX Send MFX Send MFX Send MFX Send MFX Send MFX Send MFX Send MFX S.
106 Index Symbols +/- .................................................................. 14, 23 Numerics 3-WAY ................................................................. 48 A Acoustic Drum Kit ............................................. 32 Add Tambourine .
107 Index F F RESET ............................................................... 81 Factory Reset ...................................................... 81 FADER ........................................................... 24, 37 FIXED .............
108 Index ONESHOT .......................................................... 58 Open Rim Shot ................................................... 26 OPTION .............................................................. 80 Other Instruments ...........
109 Index T TAMB .................................................................. 33 TAP ................................................................ 58–59 Tap Ptn Mute Grp .............................................. 35 Tap Reset Time .....
110 Preset Drum Kit List No. Name 1 VPro 2 Slamin’ *1 3 METAL 4 JazzCombo 5 OverDrive 6 Titanium 7 RotoKit *1 8 UNIVERSE 9 Skanky 10 Brushes *2 No. Name 11 Spark! 12 >>GT>> 13 Antique 14 =BreakBeats= 15 Studio 16 Groover *1 17 Mallet 18 Drumline 19 JazzGig *1 20 Airtime No.
To resize thickness, move all items on the front cover This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For EU Countries Apparatus containing Lithium batteries ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering.
As of January 15, 2005 (ROLAND) Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.
Ein wichtiger Punkt beim Kauf des Geräts Roland TD-20 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Roland TD-20 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Roland TD-20 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Roland TD-20 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Roland TD-20 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Roland TD-20 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Roland TD-20 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Roland TD-20. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Roland TD-20 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
