Benutzeranleitung / Produktwartung R9999 des Produzenten Roberts Radio
Zur Seite of 24
R9999 PLL Synthesised 3 band radio with station name display Please read this manual before use ROBER TS Sound for Generations r9999 instruction book.PMD 7/28/2005, 4:07 PM 1.
Important In formation ......................................................... 1 Automatic plug and play setup .......................................... 2 Controls ........................................................................... 3-4 Display .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Automatic Plug and Play setup When your radio is first connected to a power supply (batteries or mains).
3 Controls 1. Power button 2. Mains LED indicator 3. Alternate frequency button 4. Radio text button 5. Traffic button 6. Program type button (Top) 1 48 1 0 11 13 17 20 22 23 13. Tuning control 14. Sleep button 15. Snooze button 16. Time button 17. Alarm button 18.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Controls (Rear) 24. Headphone socket (on side) 25. Battery compartment 25 26 24 26.
5 1. Auto time indicator 2. Traffic information indicator 3. Enhanced other networks indicator 4. RDS indicator 5. Memory indicator 6. Radio text indicator 7. Weekend cancel indicator 8. Sleep time indicator 9. Programme type indicator 10. Radio alarm indicator 11.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Battery operation 1. Remove the Battery cover on the rear of the unit by pushing the battery door in and downwards. 2. Insert two LR6 (AA size) batteries into the small spaces under flap with yellow label.
7 Setting the clock automatically The clock time and day of week can be set automatically when receiving an RDS station that transmits clock time (CT). The CT information is transmitted once every minute. If the station has sufficient signal strength the clock will set within one or two minutes.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Setting the clock manually 1. Ensure that the radio is switched off. 2. Repeatedly press the Time button until the auto time symbol is removed from the display.
Setting the alarm time 1. Press and hold down the Alarm button . 2. Whilst the Alarm button is held down set the alarm time by rotating the Tuning control or by pressing the Up or Down buttons . The clock uses the 24 hour system e.g. 2:30pm is shown as 14:30.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Wake to radio 1. Set the alarm time as previously described. Tune to the required station and set the Volume control to the level at which you wish to wake.
Operating your radio - search tuning 1. Switch on your radio by pressing the Power button. 2. Select the required waveband by pressing the Band button . The waveband selected will appear in the display. On FM fully extend the Telescopic aerial . On MW and LW rotate your radio for best reception.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Operating your radio - manual tuning 1. Switch on your radio by pressing the Power button . 2. Select the required waveband by pressing the Band button . The waveband selected will appear in the display.
13 Pre-setting stations You may store up to 10 different stations on each of the three wavebands giving a total of 30 preset stations. 1. Switch on your radio using the Power button . 2. Select the desired waveband using the Band button . 3. Tune into the required station using one of the tuning methods previously described.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Recalling a preset station 1. Switch on your radio using the Power button . 2. Select the desired waveband using the Band button. 3. Press one of the Preset buttons to recall the station.
15 Radio Data System ( RDS ) The R adio D ata S ystem ( RDS ) is a system in which inaudible digital information is transmitted in addition to the normal FM radio programme.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Operating your radio using RDS (Radio data system) 1. Switch on your radio and select the FM waveband. 2. Tune into a station, the display will indicate frequency for two seconds and then change to show the station name.
17 Radio Text (RT) The RDS system provide a text message of up to 64 characters in length. It is displayed by scrolling the characters of the message from right to left. 1. Switch on your radio and select the FM waveband. Tune into a station carrying RDS information.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Programme Type search (PTY) 1. To search for a station of a particular type, repeatedly press and release the PTY button until the required programme type is shown in the display.
19 5. If the station carries Enhanced Other Network information the EON symbol will appear in the display. The radio will automatically tune to other stations transmitting traffic information. When the traffic announcement has finished the radio will re-tune to the previously selected station.
Display backlight 1. The display backlight will be switched on for 8 seconds whenever a button is pressed. During Automatic Set Up, Demonstration and Radio Text modes the display backlight will remain on. Demonstration mode Your radio is equipped with a demonstration mode which when active highlights the main features available on your radio.
21 The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED.
Specifications Power Requirements Mains AC 230 volts, 50Hz only Batteries 4 x LR14 (C size) for radio 2 x LR6 (AA size) for clock/memory Battery Life Approx. 40hrs of listening for 4 hours a day at normal volume using alkaline cells. Frequency Coverage F M 87.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 Guarantee This instrument is guaranteed for twelve months.
Ein wichtiger Punkt beim Kauf des Geräts Roberts Radio R9999 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Roberts Radio R9999 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Roberts Radio R9999 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Roberts Radio R9999 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Roberts Radio R9999 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Roberts Radio R9999 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Roberts Radio R9999 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Roberts Radio R9999. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Roberts Radio R9999 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
