Benutzeranleitung / Produktwartung CD9912 des Produzenten Roberts Radio
Zur Seite of 24
CD9912 Stereo CD Radio Cassette Recorder Please read this manual before use ROBER TS Sound for Generations cd9912 instruction book.PMD 4/21/2004, 11:15 AM 1.
Contents ............................................................................. 1 Controls ........................................................................... 2-3 Display .................................................................
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Controls (Top) 1. Volume control 2. Spatial sound control 3. Function switch 4. Telescopic aerial 5. Digital sound control 6. CD door 12 11 10 9 8 7 7. Pause button 8.
Controls (Front) 13. Intro button 14. Random/Memory down button 15. Repeat/Memory up button 16. Band select button 17. Tuning Up/F.Skip button 18. Tuning Down/B.Skip button 19. Display P l ay/P au s e SE NSOR Trac k On Stop Prog Stand By UP/ F.Sk i p Repeat Random MEM Int ro DOWN/ B.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Display 4 Indicates sound effect Lights during CD playback Lights during CD pause Lights during CD intr.
ON Battery operation 1. Remove the Battery cover on the rear of your CD radio cassette by pushing the catches in the direction of the arrows. 2. Insert two LR6 (AA size) batteries into the small spaces in the battery compartment. Insert eight LR20 (D size) batteries into the remaining spaces in the compartment.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Sound controls Volume 1. Adjust the volume to the required level using the Volume control. Spatial sound 1. This feature creates a 3-D effect from the stereo sound produced by the loudspeakers.
Radio operation note : the two LR6 batteries provide power for the radio memory and must be fitted at all times. 1. Set the Function switch to the 'Radio' position. 2. Adjust the Volume control until a hissing sound is heard. 3. Repeatedly press and release the Band button until the required waveband appears in the display.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Presetting stations You may store up to 40 different stations, 20 on FM, 10 on MW and 10 on LW. 1. Select the required waveband using the Band button . 2.
Recalling a preset station 1. Select the required waveband using the Band button. 2. Select the desired memory channel using the MEM or buttons . The display indicates the selected channel, station frequency and waveband. Last station memory 1. Your radio provides an automatic last station memory function.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up.
Playing a CD 1. Press the Play/Pause button to start playback. 2. Set the Volume to the required level. 3. Set the Spatial sound and DSC controls to the required positions. 4. To pause playback press the Play/Pause button . The Pause symbol will appear in the display.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Selecting a track 1. Whilst the CD is playing, press either the B.skip or F.skip buttons to change to the desired track. 2. You can also skip tracks when the player is in stop mode.
Repeat play Repeating the CD 1. Press the Repeat button once. 'REPEAT' will appear in the display. 2. Press the Play/Pause button , the CD will repeat continuously. 3. Press the Stop button to cancel repeat play. Repeating a track 1. Press the Repeat button twice.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Checking a programme 1. Whilst the CD is in STOP mode, repeatedly press and release the Prog. button to step through the programme. The display will show the programme and track numbers.
Playing a programme 1. Press the Prog. button once to show the first track of the programme. 2. Press the Play/pause button. Play will start with the first track of the programme and stop after the last track of the programme. 3. Press the Stop button to stop playback of a programme.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Listening to cassette tapes Note: This unit is not suitable for recording onto CHROME (IEC II) or METAL (IEC IV) cassettes. For playback any cassette type may be used 1.
Recording from the Radio 1. Set the Function switch to the 'Radio' position. 2. Tune in to the desired station. 3. Adjust the Volume control to suit your requirements. 4. Insert a blank cassette with the tape surface downwards and the side you wish to record on facing towards you.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 18 Preventing accidental erasure 1. To safeguard your recordings against accidental erasure, break off the appropriate tab on the cassette as shown . 2. There is one tab for each side of the cassette.
Remote control The buttons on the remote control have the same functions as the corresponding buttons on the main unit. Note: When using your CD radio cassette on batteries, the Standby button on the remote handset can only be used to switch the unit off.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 20 Headphones 1. A Headphone Socket (3.5mm) located on the left hand end of your CD radio cassette is provided for use with either headphones or an earpiece.
21 Specifications Power Requirements Mains AC 230 volts, 50Hz only Batteries 8 x LR20 (C size) 2 x LR6 (AA size) 2 x LR03 (AAA size) included Frequency Coverage FM 87.5-108MHz MW 522- 1620kHz LW 146- 281kHz Circuit Features Loudspeaker 2 x 100mm Output Power 2 x 2.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 cd9912 instruction book.
Ein wichtiger Punkt beim Kauf des Geräts Roberts Radio CD9912 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Roberts Radio CD9912 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Roberts Radio CD9912 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Roberts Radio CD9912 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Roberts Radio CD9912 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Roberts Radio CD9912 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Roberts Radio CD9912 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Roberts Radio CD9912. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Roberts Radio CD9912 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
