Benutzeranleitung / Produktwartung Type W3600 des Produzenten Ricoh
Zur Seite of 166
Operating Instructions Scanner Reference Read this manual carefully before yo u use this machi ne and keep it h andy for future reference. For safe and corre ct use, be sur e to rea d the Safety Informatio n in "About This Machi ne" before using the ma chine.
Introduction This manual contains detailed instructions and note s on th e operation and use of this ma chine. For your safety and benefit, read this manual carefully be fo re using the machine. Kee p this manual in a handy place for quick reference. Important Contents of this manual are subject to change witho ut prior notice.
i Manuals for This Machine Refer to the manuals that are relevant to what y ou want to do w ith the machine. Important ❒ Media differ according to manual. ❒ The printed and electronic ve rsions of a manual have the same contents. ❒ Adobe Acrobat Reader/Adobe Reader must be installed in order to view the manuals as PDF files.
ii ❖ Network Guide Explains how to configure and operate the machine in a network environ- ment, and use the software provided. ❖ Other manuals • PostScript3 Supplement •U N I X S u p p l e m .
iii TABLE OF CONTENTS Manuals for This Machine .............................................. ........................................ i Notice ............................................... ..................................................... .....
iv Specifying Scan to Folder Destinations ................................. ........................... 48 Selecting the Destination from the Machine’s Address B ook .................... ............... 48 Sending Files to a Shared Network Folder ..
v 5. Scanning Originals with the Network TWAIN Scanner Before Using the Network TWAIN Scanner ....................................... .............. 101 Outline of the Network TWAIN Scanner...................... .............. ................ .......
vi Values of Various Set Items for Transmission/Storage/Delivery Function ....148 Transmission Function .............. ................. .............. ................. .............. ............... 148 Storage Function ............ ................
1 Notice ❖ Declaration of Conformity Product Name: Printer /Scanne r Controller + Copy Machine Model Number: Scanner Option Type W3600 Responsible party: Ricoh Americas Corporation Address: 5 Dedrick Place, West Caldwell, NJ 07006 Telephone number: 973-882-20 00 This device complies with Part 15 of the FCC Rules.
2 How to Read This Manual Symbols This manual uses the foll owing symbols: Indicates important sa fety notes. Ignoring these notes could resu l t i n s e r i o u s i n j u r y o r d e a t h . B e s u r e t o r e a d t h e s e notes. They can be found in the "Safety Information" section of About This Ma- chine.
3 About the Scanner Functions This section describes functions you can use in the scanner mode. For details about each f unction, see respective chapter s. ❖ Sending scanned files There are several method s you can use to send captured data as files to com- puters.
4 Display Panel This section explains the simplified display and three confi rmation screens: Check Modes, Pr eview, and Tr ansmission File Status. You can find explanations about th e E-mail screen, Scan to Folder screen, list of stored files screen, or network delivery scanner screen in this ma nual.
5 Simplified Display This section explains how to switch to the simplified di splay. When you press the { Simplified Display } key, the screen changes from the initial display to the simplified di splay. Letters and keys are displayed at a la rger size, making operations easier.
6 Confirmation Displays This section explains three conf irmation displays: Check Modes, Preview and Transmission File Status. Check Modes This section explains items that are displayed and how to display the Check Modes screen. Use the Check Modes screen to check scanning and transm ission settings.
7 Preview Use the Preview screen to check that originals have bee n scanned correctly. This section explains about the Preview screen that can be used before sending files by e-mail or Scan to Folder, or delivering files. Before you start scanning, press [ Preview ] .
8 Transmission File Status This section explains items that are di splayed and how to display the Transmis- sion File Status screen. Use the Transmission File Status screen to check e-mail transmission, Scan to Folder, and delivery results. Press [ Scanned Files Status ] to display the Transmissi on File Status screen.
9 Note ❒ You cannot check scanner function tr ansmission results by pressing [ Job List ] at the bottom of the screen. To check transmission results, press [ Scanned Files Status ] , and then display the Transm ission File Status screen. ❒ Depending on security settings, some transmission result s might not be dis- played.
10 How to Start Scanning Use one of the following two methods to start scanning: • Place originals • Press the { Start } key The default settings allow you to start scanning, storing, and delivering files by simply plac ing originals (wi thout pressing the { Start } key).
11 Scanner Features This section e xplains Scanne r Features set tings. To display the Scanner Features screen, press the { User Tools / Counter } key.
12 ❖ Send Settings ❖ Initial Settings Items Description Compression (Black & White) Specify a co mpression method for files scanned. Max. E-mail Size Select whether or not to limit the size of e-mail that has attachments. Divide & Send E-m ail Select whether or not to di vide files that ex ceed the size specified in [ Max.
13 1. Sending Scan Files by E-mail You can attach scan files to e-mails and send them via connections such as LAN and the Int ernet. Before Sending Scan Files by E-mail This section ex plains the necess ary prep arations and the procedure for sending scan files by e-mail.
Sending Scan Files by E-mail 14 1 Preparation for Sending by E-mail This section expl ains the preparation and setti ngs for sending scan files by e-mail. A Connect the machine to the network. Connect the machine to th e network usin g an Ethernet cable or wireless LAN (IEEE 802.
Before Sending Scan Files by E-mail 15 1 E-mail Screen This section explains the screen layo ut when sending scan files by e-mail. The function item s displayed serve as selector keys. You can select or specify an item by pressing it. When you select or specify an item on the display panel, it is highlighted like [] .
Sending Scan Files by E-mail 16 1 Basic Operation for Sending Scan Files by E-mail This section descri bes the basic operat ion for sending scan files by e-mail. A Make sure that no previous settings remain. If a previous setting remains, press the { Clear Modes } key.
Basic Operation for Sending Scan Files by E-mail 17 1 G Specify the destination. You can specify mult iple destinations. For details, see "Specifying E-mail Destinations".
Sending Scan Files by E-mail 18 1 ❒ If you press [ Preview ] and then start scanning while [ Preview ] is highlighted, the Preview screen appears. You can us e this screen to ch eck how the o rig- inals are scanned and the scan setting used for scanning.
Switching to the E-mail Screen 19 1 Switching to the E-mail Screen This section ex plains how to switch th e screen to the E-ma il screen. If the Scan to Folder screen is being displayed, press [ E-mail ] to switch to the E- mail screen.
Sending Scan Files by E-mail 20 1 Specifying E-mail Destinations This section explains how to specify e-mail destinations. You can specify e-mail destinations by any of the following methods: • Sele.
Specifying E-mail Destinations 21 1 Note ❒ Depending on the security setting, some destinations may not appear in the destination list. Selecting destinations by en tering the registration numbers Select the destination from the machine’s address book using its registration number.
Sending Scan Files by E-mail 22 1 Searching the machine’s address book for the destination and selecting it This section explains how to search th e machine’s address book for the destina- tion and select it. A Press [ Search Dest. ] . B To search by destination name, press [ Name ] .
Specifying E-mail Destinations 23 1 F Press [ Start Search ] . Destinations that match the se arch criteria are displayed. G Select a destination. H Select [ To ] , [ Cc ] , or [ Bcc ] .
Sending Scan Files by E-mail 24 1 Entering an E-mail Address Manually This section ex plains how to ent er an e-mail addre ss manually. A Press [ Manual Entry ] . The soft keybo ard appears so you can en ter the e-mail address. B Enter the e-mail address.
Specifying E-mail Destinations 25 1 Selecting Destinations by Searching an LDAP Server This section ex plains how to search for an address registered in an LDAP server and specify it as an e-mail destina tion. Important ❒ To use this function, an LDAP server must be co nnected to the network.
Sending Scan Files by E-mail 26 1 D Enter the beginning of the destination name. To search by e-mail addre ss, enter th e beginning of the destination address. E Press [ OK ] . F If necessary, press [ Advanced Search ] , and then specify the detailed search criteria.
Specifying E-mail Destinations 27 1 ❒ You can register multiple e-mail addresses in individual LDAP server ac- counts. However, only one e-mail addr ess will be displayed as the search result. Usually, the address that was re gistered first on the LDAP server is the address that is displayed.
Sending Scan Files by E-mail 28 1 Registering a Directly-Entered Desti nation in the Address Book This section explains how to register a directly ent ered destination in the ma- chine’s address book. You can also regist er a destination sele cted from the LDAP server.
Specifying the E-mail Sender 29 1 Specifying the E-mail Sender This section explains how to specify the e-mail sender. To send e-mail, you must specify the name of the sender.
Sending Scan Files by E-mail 30 1 Using a Registration Number to Specify a Sender Name Select the sender using the registration numbers specified by users in the ma- chine's address book.
Specifying the E-mail Sender 31 1 Selecting the Sender by Search ing the Machine’s Address Book This section ex plains how to select the sender by searching th e machine’s ad- dress book. A Press [ Sender Name ] . B Press [ Search ] . C To search by user name, press [ Name ] .
Sending Scan Files by E-mail 32 1 G Press [ Start Search ] . Destinations that match the se arch criteria are displayed. H Select the sender. I Press [ OK ] . Note ❒ Search criteria that appear in [ Advanced Search ] , such as [ Name ] , [ E-mail Ad- dress ] , and [ Folder Name ] , are registered in the machine’s address book.
Specifying the E-mail Subject 33 1 Specifying the E-mail Subject You can specify the subject for an e-mail when sendi ng a file by e-mail. A Press [ Subject ] .
Sending Scan Files by E-mail 34 1 Specifying the E-mail Message This section explain s how to specify the e-mail me ssage. The message can be created in the foll owing ways: • Select the registered .
Specifying the E-mail Message 35 1 Manual Entry of a Message You can enter the message manually. A Press [ Text ] . B Press [ Manual Entry ] . The soft keyboa rd appears so you can enter th e message.
Sending Scan Files by E-mail 36 1 Simultaneous Storage and Sending by E-mail This section ex plains how to stor e a file and simu ltaneously sen d it by e-mail. A Press [ Store File ] . B Select [ Send & Store ] . C If necessary, specify the stored file's information, such as [ User Name ] , [ File Name ] , and [ Password ] .
Sending the URL by E-mail 37 1 Sending the URL by E-mail This section ex plains how to sen d the URL of a scanned f ile by e-mail. Use this function if network restrict ions prevent you sending attachments by e-mai l. A In [ Scanner Features ] , select [ Send URL Link ] under [ Stored File E-mail Method ] .
Sending Scan Files by E-mail 38 1.
39 2. Sending Scan Files to Folders Using the Scan to Folder function, you can send scan files over the network to shared folders, FTP server folders, or NetWare folders. Before Sending Files by Scan to Folder This section describes the preparations and procedure for sending files by Scan to Folder.
Sending Scan Files to Folders 40 2 Sending files to an FTP server 1. This machine You can send scan files to FTP server folders. To send scan files to FTP server folders, use the FTP protocol. 2. FTP server The FTP server is a server that provi des file transfer services among computers on the same network.
Before Sending Files by Scan to Folder 41 2 Sending files to a NetWare server 1. This machine You can send scan files to NetWare fold- ers. To send scan files to NetWare fold- ers, use the NCP protocol. 2. NetWare Server You can use this server to share files over the network via NetWare.
Sending Scan Files to Folders 42 2 Preparation for Sending by Scan to Folder This section describes the preparations and settings for sending scan files by Scan to Folder. Important ❒ Files can be sent to shared folders on client computers. ❒ Files can also be sent to FTP se rvers if any exist on the network.
Before Sending Files by Scan to Folder 43 2 Registering Destination Fo lders in the Address Book You can register the addresses of freque ntly-used dest ination folders in the ad- dress book. Register the folder addresses in [ Address Book Management ] under [ Administrator Tools ] from [ System Settings ] .
Sending Scan Files to Folders 44 2 Scan to Folder Screen This section describes the screen layout wh en sending scan files by Scan to Folder. The function item s displayed serve as selector keys. You can select or specify an item by pressing it. When yo u select or specify an item on the display panel, it is highlighted like [] .
Basic Operations When Using Scan to Folder 45 2 Basic Operations When Using Scan to Folder This section descr ibes the basic ope rations involve d in using Sc an to Folder. A Make sure that no previous settings remain. If a previous setting remains, press the { Clear Modes } key.
Sending Scan Files to Folders 46 2 G Specify the destination. You can specify mult iple destinations. For details, see "Specifying Sc an to Folder Destinations". H Place originals. I Press the { Start } key, if scanning does not start automatically.
Switching to the Scan to Folder Screen 47 2 Switching to the Scan to Folder Screen This section ex plains how to swi tch to the Scan to Folder screen. If the E-mail screen is being displayed, press [ Folder ] to switch to the Scan to Folder screen.
Sending Scan Files to Folders 48 2 Specifying Scan to Folder Destinations This section ex plains how to spec ify Scan to Fo lder destinatio ns. You can send a file by Scan to Fold er by any of the fol.
Specifying Scan to Folder Destinations 49 2 Selecting a destination regist ered in the destination list Select the destination from the destination list.
Sending Scan Files to Folders 50 2 Searching the machine’s address book for the destination and selecting it This section explains how to search th e machine’s address book for the destina- tion and select it. A Press [ Search Dest. ] . B To search by destination name, press [ Name ] .
Specifying Scan to Folder Destinations 51 2 E If necessary, press [ Advanced Search ] , and then specify the detailed search criteria. By pressing [ Advanced Search ] , you can search using criteria such as [ Name ] , [ E- mail Address ] , and [ Folder Name ] .
Sending Scan Files to Folders 52 2 Sending Files to a Shared Network Folder This section explains how to specify th e destination when sending files to a shared network folder. Important ❒ The shared folder must have been crea ted on the client computer in advance.
Specifying Scan to Folder Destinations 53 2 E Press [ OK ] . F Depending on the destination setting, enter the user name for logging on to the client computer. Press [ Manual Entry ] to the right o f the user name field to display the soft key- board.
Sending Scan Files to Folders 54 2 Specifying the path by browsing the network for destinations You can browse computers on the networ k for the destination folder, and then specify the path. A Press [ Manual Entry ] . B Press [ SMB ] . C Press [ Browse Network ] under the path name field.
Specifying Scan to Folder Destinations 55 2 Note ❒ If authentication is requi red to acce ss the folde r, the login screen appears. Enter the user name and password. ❒ If you change the protocol after en tering the path name, user name, or password, a confirmation message appears.
Sending Scan Files to Folders 56 2 E Press [ Manual Entry ] on the right side of the path field. F Enter the path for the folder. The following is an example of a path wh ere the folder name is "user" and the subfolder name is "lib": userlib.
Specifying Scan to Folder Destinations 57 2 Sending Files to NetWare Server This section explains how to specify de stinations when sending files to a Net- Ware server. The NetWare fo lder of the destinatio n can be specified in an NDS tree or on a NetWare Bindery server, depending on the NetWare environment.
Sending Scan Files to Folders 58 2 E Enter the path for the folder. If you set the connection type to [ NDS ] , the NDS tree name is "tree", the name of the context including the volume is "conte xt", the volume name is "volume", and the folder name is "folder", the path will be "treevolume.
Specifying Scan to Folder Destinations 59 2 Specifying the path by browsing to the destination on a NetWare server Specify the path by browsing to the destination folder in an NDS tree o r on a NetWare Bindery server. A Press [ Manual Entry ] . B Press [ NCP ] .
Sending Scan Files to Folders 60 2 ❒ If the selected NDS tree or NetWare Bindery serv er requires auth entica- tion, a login screen appears. Enter a user name and password for logging on to the NDS tree or NetWare Bindery server.
Specifying Scan to Folder Destinations 61 2 Registering the Path to the Select ed Destination in the Address Book Th i s s e ct i o n e x pl a i n s ho w t o r e gi s t e r f ol d e r p a th s y o u h av e e n t er e d m a n u al l y o r specified by browsing the networ k to the machine's address book.
Sending Scan Files to Folders 62 2 Simultaneous Storage and Sending by Scan to Folder This section explains how to store a file and simultaneously send it by Scan to Folder. A Press [ Store File ] . B Make sure that [ Send & Store ] is selected. C If necessary, specify file data, such as [ User Name ] , [ File Name ] , and [ Password ] .
63 3. Storing Files Using the Scanner Function Using the scanner function, you can stor e scan files in the machine, and then send the stored files by e-mail or Scan to Fol der. Before Storing Files This section outlines file storage under the scanner function and provides relat- ed cautions.
Storing Files Using the Scanner Function 64 3 Note ❒ Stored files will be deleted after a set period. For detai ls about specifying the period, see Genera l Settings Guide. ❒ Files stored under the scan ner function cannot be printed from the machine’s control pane l.
Basic Operation for Storing Scan Files 65 3 Basic Operation for Storing Scan Files This section descri bes the basic operation for storing scan files. A Make sure that no previous settings remain. If a previous setting remains, press the { Clear Modes } key.
Storing Files Using the Scanner Function 66 3 Note ❒ Depending on the security setting, [ Access Priv ileges ] may appear instead of [ User Na me ] . For details about specifyin g [ Access Privileges ] , consult the administrator. ❒ By pressing [ Send & Store ] , you can simultaneously store scan files and send them.
Specifying File Information for a Stored File 67 3 Specifying File Information for a Stored File You can specify data for a stored file, such as user name, file name, and pass- word.
Storing Files Using the Scanner Function 68 3 Specifying a File Name This section ex plains how to change the name of a store d file. A stored file is allocated a name starting with "SCAN" followed by a 4-digit number. • Example: SCAN0001 You can change this file name.
Specifying File Information for a Stored File 69 3 Specifying a Password You can specify a passwor d for the stored file. Important ❒ Do not forget the password. If you forget it, consult the system administrato r of the machine. By specifying a password, you can ensure that only the people who know the password can view the file.
Storing Files Using the Scanner Function 70 3 Displaying the List of Stored Files This secti on describes the li st of stored file s. Using the list of stored files, you can del e te stored files or change the file data. List of Stored Files This section descr ibes how the lis t of stored files is displayed.
Displaying the List of Stored Files 71 3 Note ❒ You cannot displ ay thumbnails of st ored files whose origina l sizes are larger than 18 × 24 inch or A2. ❒ Depending on the security setting, so me files may not appear in the list. ❒ Files stored under functions other than the scanner function do not appear on this screen.
Storing Files Using the Scanner Function 72 3 Searching by file name You can search for a stored file by its file name. A Press [ Select Stored File ] . B Press [ File Name ] . The soft keybo ard appears. C Enter the file name. For information a bout how to enter characters, see About This Machine.
Checking Stored Files 73 3 Checking Stored Files You can display the Preview screen and check a stored file on the machine or from the client computer. Checking a Stored File Selected from the List This section explains how to preview a file selected from the list of stored fi les.
Storing Files Using the Scanner Function 74 3 Stored file preview screen 1. [ Zoom Out ] , [ Zoom In ] In previewing, you can reduce or enlarge the file image. 2. [ ← ][ → ][ ↑ ][ ↓ ] You can scroll the preview screen. 3. [ Switch ] You can switch to a preview of another page.
Checking Stored Files 75 3 Checking Stored Files from a Client Computer Using DeskTopBinder Lite or Web Image Monitor, you ca n also display the files stored in the machine on a client computer.
Storing Files Using the Scanner Function 76 3 Sending a Stored File This section ex plains how to se nd a stored fil e. Stored files can be sent by e-mail, Scan to Fo lder, or the network delivery scanner. Note ❒ There are two me thods of sending sto red files by e-mail.
Sending a Stored File 77 3 D If necessary, switch to the E-mail, Scan to Folder, or network delivery scan- ner screen. For details about switching t he screen, see "Switching to the E- mail Screen", "Switching to the Scan to Folder Screen", or "Switching t o the Network Deliv- ery Scanner Screen".
Storing Files Using the Scanner Function 78 3 Managing Stored Files This section explains how to delete stor ed files and how to change the data for stored files. Deleting a Stored File This section explains how to delete a stored file. A Press [ Select Stored File ] .
Managing Stored Files 79 3 Note ❒ Files waiting for delive ry cannot be deleted. ❒ You can also delete files stored in the machine by acce ssin g the machin e from a client computer using Web Im age Monitor or DeskTopBinder. For detail about Web Image Monitor, see We b Image Monitor Help.
Storing Files Using the Scanner Function 80 3 C Select the file containing the file information you want to change. If you select a password-pro tected stored file, a screen for entering the pa ss- word appears. Enter the password, and then press [ OK ] .
Managing Stored Files 81 3 Changing a file name You can change the file name of a stored file. A Press [ Select Stored File ] . The list of stored files appears. B Press [ Manage / Delete File ] . C Select the file containing the file information you want to change.
Storing Files Using the Scanner Function 82 3 Changing a password Enter the password fo r a ccessing the stored file. Important ❒ Be sure not to forget th e password. If you forget it, consult the system admin- istrator of the machine. A Press [ Select Stored File ] .
83 4. Delivering Scan Files Using the ScanRouter delivery software , you can deliver by various methods scan files produced by the machine. Before Delivering Files This section describes the necessary pr eparations and the procedure for using the network delivery scanner.
Delivering Scan Files 84 4 Preparing to Deliver a File This section descri bes the preparations and settings for delivering scan files. Important ❒ To use the network delivery scanner func tion, you need a delivery server on which the optional the ScanR outer delivery software i s installed.
Before Delivering Files 85 4 Installing DeskTopBinder Lite from the Supplied CD-ROM This section explains how to install De skTopBinder Lite on a client computer from the supplied "Scanner Dr ivers and Utilities" CD-ROM. To view or receive files delivered to th e in-trays, you must install DeskTopBi nd- er Lite on the client computer.
Delivering Scan Files 86 4 Network Delivery Scanner Screen This sectio n describes the scr een layout when us ing the network delivery scan- ner. The function item s displayed serve as selector keys. You can select or specify an item by pressing it. When yo u select or specify an item on the display panel, it is highlighted like [] .
Basic Operation fo r Delivering Files 87 4 Basic Operation for Delivering Files This section describes the ba sic operation for delivering scan files using the net- work delivery scanner. Important ❒ You must register destinations and se nders in advance using the ScanRouter delivery software installe d on the delivery server.
Delivering Scan Files 88 4 F Specify the destination. You can specify mult iple destinations. For details, see "Specifying Delivery Destinations". G If necessary, press [ Subject ] to specify the e-mail subject. For details, see "Specifying the Subject o f the E-mail to Be Transmitted via t he Delivery Server".
Basic Operation fo r Delivering Files 89 4 Reference p.90 “Switching to the Network Delivery Scan ner Screen” p.107 “Various Scan Settings” p.120 “Adjusting Image Density” p.121 “Setting Original Orientation” p.91 “Specifying Delivery Destinations” p.
Delivering Scan Files 90 4 Switching to the Network Delivery Scanner Screen This section explains how to switch the screen to the network delivery scanner screen. I f t h e E - m a i l s c r e e n o r S c a n t o F o l d e r s c r e en is being displayed, switch to the net- work delivery scanner screen.
Specifying Delivery Destinations 91 4 Specifying Delivery Destinations This section expl ains how to specif y delivery destina tions. Selecting Destinations Registered in the Delivery Server’s Addre.
Delivering Scan Files 92 4 Selecting destinations by ente ring their registration numbers You can select a sender by en tering its Short ID number. A Press [ Reg. No. ] . B Using the number keys, enter the three-digit registration number, and then press the { q } key.
Specifying Delivery Destinations 93 4 Selecting destinations by searching the delivery server’s destination list In the delivery server’s Destination List, you can search for d estinations and select them. A Press [ Search Dest. ] . B To search by destination name, press [ Name ] .
Delivering Scan Files 94 4 Note ❒ The Comment search function searches for destinations by comment informa- tion, which is a registration item requir ed by the ScanRouter delivery software. ❒ By pressing [ Details ] , you can view details about the selected destinations.
Specifying the Sender 95 4 Specifying the Sender This section explains how to speci fy the e-mail sender when sending a file by e- mail via the delivery se rver.
Delivering Scan Files 96 4 Selecting the Sender by Ente ring the Registration Number Select a sender by entering its Sho rt ID number (registered using the ScanRouter delivery software). For details about h ow to set Short IDs, see the manuals sup- plied with the ScanRouter delivery softwa re.
Specifying the Sender 97 4 Selecting a Sender by Searching the Del ivery Server’s Destination List This section ex plains how to sele ct a sender by searching the delivery se rver’s Destination List. A Press [ Sender Name ] . B Press [ Search ] . C To search by destination name, press [ Name ] .
Delivering Scan Files 98 4 F If necessary, press [ Advanced Search ] , and then specify the detailed search criteria. By pressing [ Advanced Search ] , you can search by [ Name ] and [ Comment ] . Y ou can also search by combining the [ Beginning Word ] or [ End Word ] criteria with the other criteria.
Specifying the Subject of the E-mail to Be Transmitted via the Delivery Server 99 4 Specifying the Subject of the E-mail to Be Transmitted via the Delivery Server This section ex plains how to speci fy the e-mail subject when sending a file by e- mail via the delivery se rver.
Delivering Scan Files 100 4 Simultaneous Storage and Delivery This section ex plains how to st ore a file and simu ltaneously del iver it. A Press [ Store File ] . B Make sure that [ Send & Store ] is selected. C If necessary, specify file data, such as [ User Name ] , [ File Name ] , and [ Password ] .
101 5. Scanning Originals with the Network TWAIN Scanner The TWAIN driver allows you to scan orig inals into a cli ent computer over a net- work. Before Using the Network TWAIN Scanner The TWAIN driver allows yo u to scan originals on the machine from a client computer via the network.
Scanning Originals with the Network TWAIN Scanner 102 5 Outline of the Network TWAIN Scanner This section outlines the network TWAIN s canner function.
Before Using the Network TWAIN Scanner 103 5 Preparing to Use the Network TWAIN Scanner This section descri bes the preparation s and settings for using the machine as a network TWAIN scanner. Important ❒ To use the network TWAIN scanner, an application that supports the scan- ner, such as DeskTopBind er Lite, must be installed on the computer.
Scanning Originals with the Network TWAIN Scanner 104 5 Installing the TWAIN Driver from the Supplied CD-ROM This section explains how to install the TWAIN driver on a c lient computer from the supplied "Scanner Drivers and Utilities" CD-ROM.
Basic Network TWAIN Scanner Operation 105 5 Basic Network TWAIN Scanner Operation This section describes the basic operatio n for scanning with the network TWAIN scanner. Important ❒ To use the network TWAIN scanner, a TWAIN-compli ant application, such as DeskTopBinder and the TWAIN driver must be installed on the client com- puter.
Scanning Originals with the Network TWAIN Scanner 106 5 Note ❒ If you hav e already sele cted a scanne r, you do not n eed to select the scan- ner unless you want to change it. ❒ Using DeskTopBinder, you can edit and print scan files. For more informa- tion about DeskTopBinder, see DeskTopBinder manuals.
107 6. Various Scan Settings This section descr ibes various scan settings. Specifying Scan Settings This section ex plains how to mak e scan settings. A Press [ Scan Settings ] . B Specify resolution, scan size, and other settings, as required. For details about individual scan settings, see "Scan Sett ings".
Various Scan Settings 108 6 Scan Settings This section descr ibes the items for Scan Settings. Scan Type Select a scan ty pe that is appropriat e for your orig inal. ❖ [ Text ] Appropriate to increase OCR readabilit y using an OCR-compliant application.
Scan Settings 109 6 ❖ [ Custom Size ] Scans in a specified si ze. You can specify the dimensions (width an d height) of the scan area in inch. For details, see "Scanning Custom Size Originals". Note ❒ You can specify original sizes of 8.
Various Scan Settings 110 6 Scanning Custom Size Originals This section explains the procedures fo r setting custom sizes and how to place originals whose sizes do not match any template sizes.
Scanning Custom Size Originals 111 6 A Press [ Scan Settings ] . B Press [ Scan Size ] . C Press [ Custom Size ] . D Press [ Auto Detect ] . E Select X1 under [ Origina l Size ] , enter the width of the original using the number keys, and then press the { q } key.
Various Scan Settings 112 6 F Press [ OK ] . G Check the value of Scan Area (X3) and [ Auto Detect ] are displayed, and then press [ OK ] ..
Scanning Custom Size Originals 113 6 To specify the length and width of an original Use the following procedure to scan the entire area of an original by specifying the width and length of the original un der Original Size (X1 and Y1) an d Scan Size (X3 and Y3).
Various Scan Settings 114 6 D Specify Original Size (X 1 and Y1) using the number keys, and then press the { q } key. For example, set X1 to 17.0 inch and Y1 to 11.0 inch. E Set Start Position (X2 and Y2) to 0 inch. For example, set X2 and Y2 to 0 i nch, and then press the { q } key.
Scanning Custom Size Originals 115 6 Scanning Part of an Original This section explains how to set a custom size for scanning an area wit hin an original. Important ❒ Depending on the default setting of [ Start Position ] or [ Scan Area ] , you mi ght not be able to make settings for [ Original Size ] before other items.
Various Scan Settings 116 6 D Specify Original Size (X 1 and Y1) using the number keys, and then press the { q } key. For example, set X1 to 11.0 inch and Y1 to 9.0 inch. E Specify Start Position (X2 and Y2) us ing the number keys, and then press the { q } key.
Scanning Custom Size Originals 117 6 How to Set Originals to Sc an Them by Custom Size This section ex plains how to pl ace origin als you want to scan at Custom Size. ❖ Original Orientation setting Under [ Original Orientation ] , select [] , [] , [] , or [] according to the orientat ion of you r origi nal.
Various Scan Settings 118 6 Reference p.121 “Setting Original Ori entation” When Original Orientation is [] A TF012S.
Waiting for Additional Originals 119 6 Waiting for Additional Originals This sections explains about the stan dby mode for additional originals when you scan multiple pages as a single file. If you select [ Next Original Wait ] , the machine waits indefini tely for the next origi- nal.
Various Scan Settings 120 6 Adjusting Image Density This section ex plains how to adjust image density. To adjust image density, press [ W ] or [ V ] , at the left and right of [ Auto Density ] . These butto ns increase o r decrease the ima ge density in single incremen ts up to 7.
Setting Original Orientation 121 6 Setting Original Orientation This section explains how to correctly di splay the top/bottom orient ation of scanned originals on a client computer scre en. A Press [ Orig. Orientation ] . B Press a key that indicates the same orientation as the original.
Various Scan Settings 122 6 Note ❒ You can make the original orientation setting only when the scan size is specified. ❒ Originals are normally rectangular ( ) or horizontally long ( ). However, the table above uses squares to make original orientation easier to under- stand.
Scanning Multiple Pages into a Single File 123 6 Scanning Multiple Pages into a Single File You can scan multiple pages into a single f ile. Select the standby mode for additional originals from the f.
Various Scan Settings 124 6 E To scan additional originals, place them within the specified time. Repeat this step until all originals are scanned. If you change settings while the machin e is waiting for additional originals, the countdown stops. If you place an or iginal, it is scanned, and the count- down for placing additional originals starts.
Scanning Multiple Pages into a Single File 125 6 When a Time Limit Is Not Specif ied for Additional Original s A Specify the scan settings and orientation for your original. B Select [ Next Original Wait ] . For details about selecting [ Next Original Wait ] , see "Waiting for Additional Originals".
Various Scan Settings 126 6 Setting File Type and File Name This section explains the procedure for se tting file type, file name, and secu rity for PDF file s. Setting File Type This section e xplains the pro cedure for se tting the file type of a file you want to send.
Setting File Type and File Name 127 6 B Select a file type. C Press [ OK ] . Note ❒ In some cases, even if [ Compression (Bla ck & White) ] is set to [ On ] in [ Scanner Features ] , the file size may be bigger than the one when [ Compression (Black & White) ] is set to [ Off ] .
Various Scan Settings 128 6 A Press [ Send File Type / Name ] . B Press [ File Name ] . The soft keybo ard appears. C Enter a file name. D Press [ OK ] twice.
Setting File Type and File Name 129 6 Changing the starting digit of file name serial numbers A single-page file is assigned a serial number after the file name. The star ting number of this serial number can be changed as follows: A Press [ Send File Type / Name ] .
Various Scan Settings 130 6 Security Settings to PDF Files This section ex plains security s ettings for PDF f iles. Use security settings to prevent unauthorized acce ss to PDF files. Important ❒ Security settings can be made for PDF files only . Encrypting PDF files Set a password to protect and encrypt a PDF file .
Setting File Type and File Name 131 6 F In [ Password ] , press [ Enter ] . G Enter a password, and then press [ OK ] . The password entered here will be required to open the PDF file. H Enter the password again, and then press [ OK ] . I In [ Encryption Level ] , select [ 40 bit ] or [ 128 bit ] .
Various Scan Settings 132 6 Changing security permi ssions for PDF files Set a Master Password to restrict unauth orized printing , changing, copying, o r extracting of a PDF file's content. Only users who have the Ma ster Password can reset or change these restrictions.
Setting File Type and File Name 133 6 F In [ Password ] , press [ Enter ] . G Enter a password, and then press [ OK ] . Th e p a s s wo r d e n t er e d h e r e w i l l b e r e q u i re d t o c h an g e t h e s e c u r i ty s e t t in g s o f the PDF file.
Various Scan Settings 134 6 Programs You can register frequently used settings in the machine memory and recall them for future use. Note ❒ You can register up to 10 programs fo r the scanner mode. ❒ Programs are not delete d by turning the power off or by pressing the { Clear Modes } key unless the content is de leted or newl y registered.
Programs 135 6 D Select the number of the program in which you want to register the set- tings. Program numbers with m already have settings in them. E Enter the program name.
Various Scan Settings 136 6 Changing a Registered Program To change the settings registered to a program: A Press the { Program } key. B Press [ B Recall ] . C Press the number of the prog ram you want to change. D Change settings of the program. E Press the { Program } key.
Programs 137 6 Deleting a Program To delete a register ed program: A Press the { Program } key. B Press [ Delete ] . C Press the number of the prog ram you want to delete. D Press [ Yes ] . The program is deleted, and the init ial screen reappears a fter a moment.
Various Scan Settings 138 6 Registering Initial Valu es for Initial Display This section explains how to set defaul ts for the initial screen, which appears when the machine is turned on or when settings are cleare d or reset.
Scan Settings When Using as a Twain Scanner 139 6 Scan Settings When Using as a Twain Scanner This section explains how to specify orig inal orientation when you are using the machine as a TWAIN scanner.
Various Scan Settings 140 6 Note ❒ Originals are normally rectangular ( ) or horizontally long ( ). However, the table above uses squares to make original orientation easier to under- stand.
141 7. Appendix The appendix details specifications of the scanner function and explains supple- mentary settings. Relationship between Resolution and Scan Size This section e xplains the r elationshi p between resolution and scan size. Resolution and scan size ar e inversel y related.
Appendix 142 7 When Using the E-mail, Scan to Folder, Storing, or Network Delivery Function This section explains the relationship be tween resolution and scan size when us- ing the e-mail, Scan to Folder, storing, or network delivery scanner function.
Relationship between Resolution and Scan Size 143 7 • : You can select [] , [] , [] , or [] as the pl acing orientation of the original. • : You can select [] or [] as the placing orient ation of the original. • Unmarked: You can o nly select [] as the placing orienting of the origi- nal.
Appendix 144 7 When Using as a TWAIN Scanner This section explains the relationship be tween resolution and scan size when us- ing the machine as a TWAIN scanner. The maximum resolution avai lable for sca nning is determ ined by the orig inal's horizontal measurement (width).
Software Supplied on CD-ROM 145 7 Software Supplied on CD-ROM This section ex plains the appl ic ations on the supplied CD-ROM. Auto-Run Program This section ex plains the aut o-run program. When the CD-ROM is inserted into a client computer running Windows 95/98/Me/2000/XP, Windows Serve r 2003, or Windows NT 4.
Appendix 146 7 DeskTopBinder Lite This section tells you the file path to DeskTopBinder Lite, the DeskTopBinder Lite system requirements, and the applic ations that are installed with DeskTop- Binder Lite.
Software Supplied on CD-ROM 147 7 ❖ Software installed with DeskTopBinder Lite •A u t o D o c u m e n t L i n k Auto Document Link on the client comp uter moni tors in-t rays of the deliv- ery server periodically, retrieves files delivered to in-trays, and notifies the user of delive ry.
Appendix 148 7 Values of Various Set Items for Transmission/Storage/Delivery Function This section e xplains the valu es of va rious transmission/storage/delivery func- tion settings.
Values of Various Set Items for Tr ansmission/Storage/D elivery Function 149 7 Scan to Folder The following table t ells you the maximum values of the Scan to Fo lder function settings. Simultaneous transmission The following table tells you the maximum values of settings for using the e- mail and Scan to Folder funct ions simultaneously.
Appendix 150 7 Storage Function The following table tells you the maximum va lues of the storage function settings. Item Maximum value Comments Number of file name charac ters 64 alphanumeric charac- ters On the control panel, the first 16 characters are displayed.
Values of Various Set Items for Tr ansmission/Storage/D elivery Function 151 7 Network Delivery Function The following table tells yo u the values of setting items for the network delivery scanner function.
Appendix 152 7 Specifications The following table tells you the specifications of the scanner. Scan method Original feed image scanning Scan speed • When using Network Delivery Scanner function: 150 dpi ⇒ 12.6"/sec 200 dpi ⇒ 9.4"/sec 300 dpi ⇒ 6.
153 INDEX A Address book , 14 , 43 , 50 Advanced search , 22 , 25 , 31 , 50 Auto density , 120 Auto Detect , 110 Auto-run program , 145 B Bindery , 57 , 59 C CD-ROM , 145 Change , 79 file name , 81 pa.
154 M Managing stored files , 78 , 79 , 81 , 82 Manual Entry e-mail address , 24 message , 35 path for the folder , 52 path of the NetWare server , 57 Mirror Image , 109 N NCP , 57 , 59 NDS , 57 , 59 .
155 Sending the URL , 37 Send setti ngs , 11 Serial numbe r , 129 Set Wait Time , 123 Simultaneous storage , 36 , 62 , 100 SmartDeviceMonitor for Admin , 14 , 43 SMB , 39 , 54 SMTP server , 13 Specifi.
156 EN USA B286-6704.
Copyright © 2007.
Operating Instructions Scanner Reference EN USA B286-6704.
Ein wichtiger Punkt beim Kauf des Geräts Ricoh Type W3600 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Ricoh Type W3600 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Ricoh Type W3600 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Ricoh Type W3600 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Ricoh Type W3600 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Ricoh Type W3600 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Ricoh Type W3600 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Ricoh Type W3600. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Ricoh Type W3600 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
