Benutzeranleitung / Produktwartung 56c des Produzenten Acer
Zur Seite of 23
AcerView 56c Color Monitor 15” (38cm) CRT Size, 13.7” (34.8cm) Max. Viewable Area User’s Manual.
ii Copyright Copyright © 1998 by Acer Peripherals, Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translat.
iii Safety Instructions The AC plug isolates this equipment from the AC supply. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Slots and openings in the cabinet and the back or bottom are provided for ventilation.
iv FCC Class B Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
v CE Declaration This monitor, AcerView 56c, complies with 72/23/EEC and 89/336/EEC modified by 92/31/ECC. These directives refer to EMC. Canadian Department of Communications Regulatory Statement Thi.
vi Table of Contents Table of Contents ......................................................................................... vi Chapter 1 Introduction ..................................................................................... 1- 1 Unpacking the Package .
1- 1 Introduction Introduction Unpacking the Package Check following items. If they are missing or damaged, consult your place of purchase immediately. ü Color monitor ü Swivel base ü ü User’s manual ü ü Power cord ü Locate the model name and the serial number labeled on the back of your monitor.
1- 2 Introduction ü Flicker-free Image The monitor supports high refresh rates up to 85Hz at 1024x768 resolution with VESA’s best recommendation. ü Larger Viewable Size With its 13.7” viewable size, it offers a larger screen than other 15” monitors.
2- 1 Getting Started Getting Started Installing the Swivel Base Place the monitor on its side. Locate the arrow and the four slots at the bottom of the monitor. As directed by the arrow inscribed on the swivel base, insert the four pegs on the base into the slots at the bottom of the monitor.
2- 2 Getting Started Push the swivel base gently toward the front of the monitor until it is locked. Place the monitor back to its normal position..
2- 3 Getting Started Installing the Monitor This monitor is equipped with an autosensing power supply for voltage ranges 90~264V AC, 47~63Hz. Make sure that the system power is turned off. Plug the signal cable into the video signal port of your computer and fix it with the two screws.
.
3- 1 Adjusting the Monitor Adjusting the Monitor A Look at the Control Panel Adjusting the Monitor You can adjust the monitor with the On-Screen Display (OSD) menus. Press the following four keys on the control panel , , , to make necessary settings. Panel key introduction Page switches between function control pages.
3- 2 Adjusting the Monitor Selecting page and making adjustments Grouped by functions, the OSD offers three pages for making adjustments: Display Control, Color Weighting, and User Mode display. Following describes the contents of each page and how you can make adjustments.
3- 3 Adjusting the Monitor H. Position adjusts the horizontal position of the display. Trapezoid makes the vertical edges of the display parallel. H. Size adjusts the display width. Parallelogram corrects image distortions. V. Position adjusts the vertical position of the display.
3- 4 Adjusting the Monitor Following is the setting of each factory default: Factory Default Color Temperature C1 9300K C2 6500K C3 5500K C4 7100K C5 11500K Page 3 User Mode Display This page shows the current resolution, horizontal and vertical frequency status.
3- 5 Adjusting the Monitor F To set the timing and the refresh rate, see the user’s guide of your video card. Reset to Defaults Press and simultaneously to reset the monitor to the default factory settings. Factory Preset Timings Mode Resolution Vertical Frequency (Hz) Horizontal Frequency ( KHz) VGA 640 x 400 70 31.
.
4- 1 Troubleshooting and Useful Hints Troubleshooting and Useful Hints Troubleshooting Make sure that your monitor is properly installed if you have encountered any trouble using this product (For hardware installation, see Chapter 2, Getting Started ) .
4- 2 Troubleshooting and Useful Hints ü Colors are impure. q Check signal cable connector pins. If there are bent or missing pins, consult your place of purchase. Maintenance û Do not expose the monitor to direct sunlight or heat. û Do not spill liquid on the monitor.
4- 3 Troubleshooting and Useful Hints Need More Help? If your problems remain after checking this manual, please contact your place of purchase or e-mail us at: stevenleung@api.
5- 4 Specifications Specifications Picture Tube Size Type Dot pitch Surface coating 15” (38cm) diagonal Mini-neck 0.28mm dot pitch AG, AS coating Maximum Viewable Size 13.7” (34.8cm) diagonal Power Supply (Universal) Input voltage Power consumption 90~264 V AC, 47~63 Hz 75 W max.
5- 5 Specifications Ambient Temperature Operating Storage +5 ° C ~ +40 ° C / +41 ° F ~ +104 ° F -20 ° C ~ +60 ° C / -4 ° F ~ +140 ° F Humidity Operating Storage 20% ~ 90% 10% ~ 90% Dimensions (W x H x D) 376 mm (W) x 373 mm (H) x 385 mm (D) Weight (net) 12.
Ein wichtiger Punkt beim Kauf des Geräts Acer 56c (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Acer 56c noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Acer 56c - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Acer 56c reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Acer 56c erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Acer 56c besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Acer 56c verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Acer 56c. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Acer 56c gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
