Benutzeranleitung / Produktwartung SH7144 Series des Produzenten Renesas
Zur Seite of 30
2004.1.29 SH7144 Gro up FP-112 B User System Interfa ce Board HS7144ECH61H User’s Manual Renesas M icrocomput er Developm ent Envir onment System SuperH TM Family /SH7144 S eries Rev.
Cautions Keep safety first in your circ uit designs ! 1. Renesas Technology Corp. put s the maxi mum effort into maki ng semiconduct or product s better and more reliable, but the re is always the possi bility that trouble may occur with them. Trouble with semi conductors may lead to personal injury, fi re or propert y damage.
I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this u ser system interface cable. • KEEP the user's manual handy for future reference. Do not atte m pt to use the user system interface ca ble unt il y ou fully understa nd it s mec ha ni s m.
II LIMITED WARRANTY Renesas warrants its user system interface cabl es to be manufactured in accordance with published specifications and free from defects in material and/or workmanship. Renesas will re pair or replace any user system interfac e cables determine d to be defective in ma terial and/or workmanship.
III State Law: Some states do not allo w the exclusion or limitatio n of implied warranties or liabilit y for incidental o r consequential d amages, so t he ab o ve limitation or excl usion ma y not appl y to you. This warr ant y give s yo u spec if ic lega l rig hts, and you ma y have ot her rig hts wh ic h may va ry fro m state to state.
IV SAFETY PAGE READ FIRST • READ this user's manual before using this u ser system interface cable. • KEEP the user's manual handy for future reference. Do not atte m pt to use the user system interface ca ble unt il y ou fully understa nd it s mec ha ni s m.
V W ARNING Observe the pr ecautions listed below. Failur e to do so will result in a FIRE HA ZARD and will damag e the user system and the emula tor product or will r esult in PERSONAL INJURY. Th e USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product b y yourself for e lectric sho ck prevention and quality assurance.
i Preface The HS7144ECH61H is a u ser sy stem interface board th at connects a u ser sy stem for the SH7144 FP-112B packag e to the SH 7046 E6000H emu lator (HS7046EPH60H).
ii Contents Section 1 Configuration ..................................................................................... 1 Section 2 Environmental Conditions ................................................................. 3 2.1 Setting Operating Voltage and Operating Frequency .
1 Section 1 Configuration Figure 1 and table 1 sh ow th e config uration and com ponents of the user sy stem interface board f or the FP-112B pack age. Please m ake s ure you have all of thes e compon ents w hen unpackin g. Socket cover Screws (M2.0 x 8 mm) with flat washers EV-chip board Board User system Spacer IC socket Screws (M2.
2 CAUTION Use an IC149-112C 15333-0B socket (m anufactured by YAMAICH I ELECTRONICS Co., Lt d.) for the FP- 112B package IC socket on the user syst em.
3 Section 2 Environmental Conditions Maintain the condit ions in table 2 when us ing the emulator. Table 2 Environmental Condit ions Item Specifications Temperature Operating: +10 to +35°C Storage: -10 to +35°C Humidity Operating: 35 to 80% RH, no condensation Storage: 35 to 80% RH, no condensation Vibration Operating: 2.
4 Section 3 Product Specifications The specifications of this product are s hown in table 3. Table 3 Product Specifications Item Specifications Target processor SH7144F Package FP-112B Function Level limitation: This function keeps the output signal from 3-V emulator system equal to or less than power supply voltage of the user system (Vcc).
5 Section 4 User Interface Specifications The user system interface board incorporates a level convers ion circuit supporting a low-voltage circuit. Accordingl y, when connecting the user sys tem to the emulator, pay att ention to the signal delays and the number of FANINs and FANOUTs.
6 (3) AVcc and AN7 to AN0 AN7 to AN0 Vss A Vss Emulator User system QS3384 5Vcc Figure 5 User System Interface Circuit for AVcc and AN7 to AN0.
7 Section 5 Connection Procedures 5.1 Connectin g User System Interface Board to User S ystem W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned.
8 5.1.2 Installing Cable Hea d CAUTION Check the location of pin 1 before inserting. Alig n pin 1 on the IC socket f or an FP-112B pack age on th e user s yst em w it h pin 1 on the us er system interf ace board, and insert the u ser system interf ace board into the IC sock et on the us er system , as shown in figure 6.
9 Screws (M2.0 x 12 mm) with flat washers Pin 1 Board IC socket (IC 149-112C15333-0B manufactured by YAMAICHI ELECTRONICS Co., Ltd.) User system Figure 6 Connecting User System Interface Board to User.
10 5.2 Connecting User System Interface Board to EV-Chip Board W ARNING Observe the precautions listed below. Failure t o do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST.
11 Connector No. UCN1 UCN1 UCN2 UCN2 Board EV-Chip Board Connector No. Board Connector No. EV-chip board Spacer User system Figure 7 Connecting User System Interface Board to EV-Chip Board.
12 5.3 Reco mm ended Dim ensions for U ser System Mount P ad (F ootprint) Figure 8 show s the recom m ended dim ensions f or the m ount pad (footprin t) for the user sy stem w ith an IC socket f or an FP-112B pack age (IC149- 112C15333-0B: m an ufactu red by YA MAIC HI ELECTRONICS C o.
13 5.4 Dim ensions for EV-C hip Board and User Syst em Int erface Boar d The dimens ions for the EV- chip board and th e user sy stem in terface board are show n in f igure 9. 140.0 116.0 Unit: mm Tolerance: ±0.5 mm EV-chip board User system interface board 19.
14 5.5 Resulting Di mensions after Conn ecting User System Interface B oard The resulting dim ensions, af ter connecting the user sy stem in terface board to the us er system , are shown in figure 10 . 36.0 14.0 61.0 IC socket (IC 149-112C15333-0B manufactured by YAMAICHI ELECTRONICS Co.
15 Section 6 Installing the MCU to the User System CAUTION 1. Check the locat ion of pin 1 before inserting. 2. Use a Philips-type screwdriver whose head matches the screw head.
16 MCU (SH7144) Screws (M2.0 x 8 mm) with flat washers Socket cover Pin 1 User system IC socket (IC 149-112C15333-0B manufactured by YAMAICHI ELECTRONICS Co.
17 Section 7 Verifying Operation 1. Turn on the em ul ator according to the procedu res described in th e SH7046 E6000H Em ulator User's Manual (HS 7046EPH60HE).
18 To use the crystal oscillator mounted on the EV-chip board Install a crystal oscillator into the crys tal oscillator terminals on the EV-chip board.
19 Section 8 Notice 1. Before connectin g any parts or cables, mak e sure that pin 1 on the both sides are correctly aligned. 2. Do not apply excessive force to th e user sy stem interf ace board w hile it is connected to th e user system .
SH7144 Group FP-112B User System Interface Board HS7144ECH61H User's Manual Publication Date: Rev.4.00, January 29, 2004 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Technical Documentation & Information Department Renesas Kodaira Semiconductor Co.
SH7144 Group F P-112B User Sy stem Inte rfac e Board HS7144E C H61H U ser’ s Manual REJ10B0038-0400H.
Ein wichtiger Punkt beim Kauf des Geräts Renesas SH7144 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Renesas SH7144 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Renesas SH7144 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Renesas SH7144 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Renesas SH7144 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Renesas SH7144 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Renesas SH7144 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Renesas SH7144 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Renesas SH7144 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
