Benutzeranleitung / Produktwartung H8S/2635 des Produzenten Renesas
Zur Seite of 32
Revision Date: Jun. 10, 2005 Renesas M icrocomput er Developm ent Envi ronm ent System H8S Family / H8S/2600 Series HS2635EC H61HE Rev.1.00 H8S/2635 FP-128 User System Interface Cable HS2635ECH61H Use.
.
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp.
.
I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this user system interface cable. • KEEP the user's manual handy for future reference. Do not attempt t o use the user system interfa ce cable until you f ully under stand its mechanism.
II LIMITED WARRANTY Renesas warrants its user system interface cables to be manufactur ed in accordance with published specifications and fre e from defects in material and/or workmanship. Renesa s will repair or replace any user system interfac e cables determine d to be defective in material and/or workmanship.
III State Law : Some states do not allo w the exclusion or lim itatio n of implied warranties o r liability for incidental or c onsequentia l damages, so the above l imitati on or exclus ion may not ap ply to you . This warranty gi ves you s pecific le gal rights , and you may have other ri ghts whi ch may vary fr om state to state.
IV SAFETY PAGE READ FIRST • READ this user's manual before using this user system interface cable. • KEEP the user's manual handy for future reference. Do not attempt t o use the user system interfa ce cable until you f ully under stand its mechanism.
V W ARNING Observe the pr ecautions listed below. Failur e to do so will result in a FIRE HA ZARD and will damag e the user system and the emula tor product or will r esult in PERSONAL INJURY. Th e USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product b y yourself for elect ric sho ck prevention and quality assurance.
i Preface Thank you for purchasing this user s ystem interface cable (HS2635ECH 61H) for the Renesas’ original microcomput er H8S/2635 group. The HS2635ECH61H is a us er system interface cable that .
ii Contents Section 1 Configuration .................................................................................... 1 Section 2 Connection Procedures ...................................................................... 4 2.1 Connecting User System Interface C able to Emulator Station .
1 Section 1 Configuration CAUTION Use an NQPACK 128RD socket (manuf actured by Tokyo Eletech Corporation) for the FP-128 package IC socket on the user syst em. Figure 1 shows the configuration of the HS 2635ECH61H user sys tem interface cable for the FP- 128 package.
2 Figure 1 HS2635EC H61H User System I nterface Cable.
3 Table 1 list s the HS2635EC H61H components. Pl ease make sure you have all of t hese components when unpacking. Table 1 HS2635ECH61H Com ponents No.
4 Section 2 Connection Procedures 2.1 Connectin g User System Interface Cable to E mulator Station W ARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY.
5 Figure 2 Connecting User System Interface Cable to E mulator Station.
6 2.2 Connectin g User System Interface Cabl e to User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE CABLE is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned.
7 User system Guide pins 4 projections to apply epoxy resin adhesive to Bottom view of IC soket Pin 1 Figure 3 Location Setting of IC Socket 2.2.2 S oldering IC Socket After fastening, s older the IC socket for an F P-128 package to the user sys tem.
8 2.2.4 F astening Cab le Head CAUTION 1. Use the screwdriber provided for t ightening screws. 2. The tightening torque must be 0.054 N•m or less. If the applied torque cannot be accurately measured, stop tightening when the f orce required to turn t he screw becomes significantly greater th an that needed when first tightening.
9 Figure 4 Connecting User System Interface Cable to User Sys tem.
10 2.2.5 Fastening Ca ble Body Connect the cable body t o the cable head. Cable body Cable head Remove jig Push the remove jig Removing User system Figure 5 Fastening Cable Body.
11 2.3 Reco mmended D imensions for User Syste m Mount Pad Figure 6 shows the recommended dimensi ons for the mount pad (footprint ) for the user sys tem with an IC s ocket for an FP-128 package (NQP ACK128RD: manufactured by Tokyo Eletech Corporation).
12 2.4 Dimension s for User System Interface Cab le Head The dimensions for the user s ystem interface cable head are shown in figure 7. Figure 7 Dimensions for User System In terface Cable Head.
13 2.5 Resulting Di mensions after Con necting User S ystem Interface Cable The resulting dimensions, after connecting the user s ystem interface cable head to the user sys tem, are shown in figure 8.
14 Section 3 Installing the MCU on the User System CAUTION 1. Check the location of pin 1 before inserting. 2. Use the screwdriver provided for t ightening screws.
15 Figure 9 Installing MCU t o User System.
16 Section 4 Verifying Operation 1. Start up the emulator according to the procedures described in the H8S/2646 E6000 Emulator User's Manual (HS2646EPI61HE). 2. Verify the user system interface cable connections by accessing the external memory and ports to check the bus states of the pins with the MEMORY_FILL command (emulator command).
17 Section 5 Notice 1. Make sure that pin 1 on the user system IC socket is correctly aligned wi th pin 1 on the cable head before inserting the cable head into the user syst em IC socket. 2. The dimensions of the recommended mount pad for the user s ystem IC s ocket are different from those of the MCU .
18 6. The P1 jumper socket is used for tes ting. Do not remove the i nserted jumper pin. P1 3 2 1 Figure 12 P1 Jumper Socket.
Renesas Microcomputer Development Environment System User's Manual H8S/2635 FP-128 User System Interface Cable HS2635ECH61H Publication Date: Rev.1.00, June 10, 2005 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Technical Documentation & Information Department Renesas Kodaira Semiconductor Co.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to " http://www.renesas.com/en/network " for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.
H8S/2635 FP-128 User System Interface Cable HS2635ECH61 H User's Manual.
Ein wichtiger Punkt beim Kauf des Geräts Renesas H8S/2635 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Renesas H8S/2635 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Renesas H8S/2635 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Renesas H8S/2635 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Renesas H8S/2635 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Renesas H8S/2635 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Renesas H8S/2635 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Renesas H8S/2635. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Renesas H8S/2635 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
