Benutzeranleitung / Produktwartung F33 des Produzenten Regency Wraps
Zur Seite of 28
01/1 1/07 F33 Freestanding Gas Stove FOR YOUR SAFETY What to do if you smell gas: Do not try to light any appli- ance Do not touch any electri- cal switch: do not use any phone in your building. Immediately call your gas supplier from a neighbour's phone.
2 Regency ® F33-3 Freestanding Gas Stove T o the New Owner: Congratulations! Y ou are the owner of a state-of-the-art Gas Stove by Fireplace Products International Ltd. The Regency ® Gas Series of hand crafted appliances has been designed to provide you with all the warmth and charm of a woodstove, at the fl ick of a switch.
Regency ® F33-3 Freestanding Gas Stove 3 T ABLE OF CONTENTS D ATA B A D G E Data Badge ................................................................ 4 INST ALLA TION Before Y ou Start ......................................................... 5 General Safety Information .
4 Regency ® F33-3 Freestanding Gas Stove D ATA B A D G E This is a copy of the label that accompanies each Regency ® F33-3 Freestanding Gas Stove. We have printed a copy of the contents here for your review . DA T A BADGE NOTE: Regency ® units are constantly being improved.
Regency ® F33-3 Freestanding Gas Stove 5 INST ALLA TION 10) Installation and any repairs to this appliance should be done by an authorised service person. An authorised service person should be called to inspect this appliance annually . Make it a practice to have all of your gas appliances checked annually .
6 Regency ® F33-3 Freestanding Gas Stove PEDEST AL ASSEMBL Y 1) For easier assembly , tip the stove on its back (preferably onto a soft surface to prevent scratching). 2) Unscrew the 4 bolts in the underside of the stove. Align the holes in the corners of the pedestal top with the corresponding holes in the base of the stove.
Regency ® F33-3 Freestanding Gas Stove 7 INST ALLA TION Pedestal & Leg/Bottom Shield Wiring Instructions 1) Disconnect the fan harness plug. 2) Disconnect the 240V power cord from the terminal block 3) Disconnect the three wires from the 3-way fan switch.
8 Regency ® F33-3 Freestanding Gas Stove DRAFT HOOD The heater has a draft hood built into its back. It must not be altered or obstructed, and the unit must be installed so that the draft hood is in the same atmospheric pressure zone as the combustion air inlet to the burner .
Regency ® F33-3 Freestanding Gas Stove 9 INST ALLA TION SYSTEM DA T A NG LPG Injector size # 36 # 52 Input Rating 33 mj 33 mj Manifold Pressure 0.8 kPa 2.
10 Regency ® F33-3 Freestanding Gas Stove LOG AND EMBER INST ALLA TION W ARNING: Dangerous operating conditions may occur if these logs are not positioned in their approved locations. Read the instructions below carefully and refer to the diagrams. If logs are broken do not use the unit until they are replaced.
Regency ® F33-3 Freestanding Gas Stove 11 Note: The door must be kept closed at all times, except during maintenance. The unit must never be operated without the glass in the door , or with the door open. DOOR HANDLE Attach spring handle by rotating counter clockwise onto rod.
12 Regency ® F33-3 Freestanding Gas Stove OPTIONAL REMOTE W ALL SWITCH 1) Run wire through the opening in the rear of the unit. Be careful not to damage wire. Note: W e recommend a maximum of 4.5m of wire but if you wish to go with a longer run use the Thermostat Wire T able.
Regency ® F33-3 Freestanding Gas Stove 13 SHUTDOWN PROCEDURE 1) Use the ON/OFF switch, wall switch, thermostat or remote control to turn off the burner . 2) Push in the PILOT knob slightly and turn clockwise to of f. Do not force. 3) Turn of f all electric power to the appliance if service is to be per- formed.
14 Regency ® F33-3 Freestanding Gas Stove COPY OF THE LIGHTING PLA TE INSTRUCTIONS OPERA TING INSTRUCTIONS 1 ) Push in the gas control knob slightly and turn clockwise t o OFF. Do not force. FOR YOUR SAFETY READ BEFORE LIGHTING A ) This appliance has a pilot which must be lighted by hand, following the instructions below exactly.
Regency ® F33-3 Freestanding Gas Stove 15 MAINTENANCE NORMAL OPERA TING SOUNDS OF GAS APPLIANCES It is possible that you will hear some sounds from your gas appliance. This is perfectly normal due to the fact that there are various gauges and types of steel used within your appliance.
16 Regency ® F33-3 Freestanding Gas Stove GENERAL FLUE MAINTENANCE Conduct an inspection of the fl ue system at least annually . Recom- mended areas to inspect are: 1) Check areas of the Flueing System which are exposed to the ele- ments for corrosion.
Regency ® F33-3 Freestanding Gas Stove 17 REMOVING V AL VE ASSEMBL Y 1) Shut off gas supply . 2) If optional fan is installed, disconnect power source to stove. 3) Remove access panel. a) Front panel on pedestal model. See diagram 1. b) Panel from bottom of leg shield.
18 Regency ® F33-3 Freestanding Gas Stove VIEW FROM BOTTOM OF THE STOVE Front of S tove Piezo Ignitor Hi/Lo On/Off Front Cover Screws Thermopile wires Orifice assembly mounting screws Orifice Thermoc.
Regency ® F33-3 Freestanding Gas Stove 19 View from back of stove S train relief grommet WA R N IN G 2 4 0 V o l t s Turn o ff p o wer b e fo re o pe nin g. Placement of Decal “W arning 240 V olts T urn Off Power” Wiring Diagram Diagram 3 F AN REPLACEMENT For Leg Unit: Remove 7 screws, remove bottom access panel and replace fan assembly .
20 Regency ® F33-3 Freestanding Gas Stove Note: Before troubleshooting the gas control system, be sure external gas shut off is in the "on" position. TROUBLESHOOTING THE GAS CONTROL SYSTEM W ARNING: BEFORE DOING ANY GAS CONTROL SER VICE WORK, REMOVE THE GLASS FRONT .
Regency ® F33-3 Freestanding Gas Stove 21 MAIN ASSEMBL Y P ARTS LIST Part # Description Part # Description 1) 460-532 Door Screen (Aust. only) 2) 850-141 Small Door - Black 850-142 Small Door - Gold .
22 Regency ® F33-3 Freestanding Gas Stove P ARTS LIST BURNER & LOG ASSEMBL Y Part # Description Part # Description 52) 910-190 Piezo Ignitor & Nut 53) 490-061 Control Panel 54) 908-672 Contro.
Regency ® F33-3 Freestanding Gas Stove 23 P ARTS LIST Part # Description Part # Description Bottom Shield & Leg Option 100) 948-216 Logo Plate - Regency ® 102) 904-257 Magnetic Catch - Large 103.
24 Regency ® F33-3 Freestanding Gas Stove NOTES.
Regency ® F33-3 Freestanding Gas Stove 25 NOTES.
26 Regency ® F33-3 Freestanding Gas Stove NOTES.
Regency ® F33-3 Freestanding Gas Stove 27 Exclusions: This limited Lifetime W arranty does not extend to or include paint, door or glass gasketing or trim.
PRINTED IN CANADA © Copyright 2007, FPI Fireplace Products International Ltd. All rights reserved..
Ein wichtiger Punkt beim Kauf des Geräts Regency Wraps F33 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Regency Wraps F33 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Regency Wraps F33 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Regency Wraps F33 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Regency Wraps F33 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Regency Wraps F33 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Regency Wraps F33 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Regency Wraps F33. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Regency Wraps F33 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
