Benutzeranleitung / Produktwartung PLDVD65IN des Produzenten PYLE Audio
Zur Seite of 33
OWNER'S MANUAL Mobile V ideo System Vertical Adjustable And Horizontal Rotatable Panel 6.5 Inch Color TFT Monitor DVD/CD/MP3 Multi-subtitle Languages Function Multi-audio Languages Function Multi-angle Function Parental Control Remote Control PLDVD65IN www .
Safety Information ....................................................................................... 4 Disc Notes .................................................................................................... 5 Installation ...............
3 FEA TURES Compatible with NTSC DVD (Video CD) This player can play discs r ecorded in either NTSC format. A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder , video D/A converter , and audio decoders. L/R stereo analog audio outputs for connection to existing head unit aux inputs.
4 CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERA TE THE MOBILE DVD PLAYER CORRECTL Y AS INSTRUCTED.
DISC NOTES 5 Disc formats supported by this player DVD 12 cm disc (Single-sided disc only) VIDEO CD 12 cm disc CD 12 cm disc MP3 12 cm disc Discs which cannot be played with this player DVD-ROM DVD-R/DVD-RAM CDV CD-G Handling and Cleaning Dirt, dust, scratches and warping disc will cause misoperation.
6 INST ALLA TION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver . Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
7 INST ALLA TION Sleeve Dashboard Screwdriver T abs Spring Washer T apping Screw Plain Washer Hex Nut Metal Strap Mounting Bolt Removing the unit 1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal.
8 INST ALLA TION DIN FRONT -MOUNT (Method B) 1. Factory radio mounting bracket 2. Car radio mounting bracket 3. Screw 4. After aligning the car radio mounting bracket with the factory radio mounting bracket, tighten the screws (5x5mm) at 2 places on each side.
9 THE PLA YER FRONT VIEW When the monitor stretching out: 1. POWER 7. PICTURE 2. Remote sensor (on the front panel) 8. VOLUME - 3. OPEN/CLOSE 9. VOLUME + 4.
10 THE PLA YER BACK VIEW 12. AUDIO/VIDEO INPUT 1 16. DIGIT AL AUDIO 13. RGB SYSTEM 17. AUDIO/ VIDEO OUTPUT 14. REMOTE SOCKET 18. DC 12V IN 15. AUDIO/ VIDEO INPUT 2 12 13 14 15 16 18 17.
11 ELECTRICAL CONNECTION 2 1 AUDIO 2 R IN YELLOW RED WHITE VIDEO 2 IN AUDIO 2 L IN REMOTE CONTROL RECEIVER RGB SYSTEM AUDIO R OUT DIGIT AL AUDIO VIDEO OUT AUDIO L OUT YELLOW RED WHITE MEMORY BACK-UP (.
12 REMOTE CONTROL LOCA TION AND FUNCTION OF KEYS 4 5 2 11 12 3 6 15 16 19 23 22 18 20 25 28 29 32 21 24 26 30 31 8 9 7 10 1 14 13 27 17.
13 REMOTE CONTROL 1. POWER Pr ess POWER to tur n the unit ON or OFF . 2. EJECT Pr ess to eject the disc. 3. OPEN/CLOSE Pr ess to open/close the monitor . 4. SUBTITLE Changing of the SUBTITLE language on multi-subtitle language DVD disc. 5. ANGLE Changing of the view angle on multi-angle DVD disc.
14 REMOTE CONTROL Preparing the Remote Contr ol Inserting the Batteries 1. Open the battery compartment cover . 2. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are oriented as indicated. 3. Close the cover Battery: T wo AAA size battery .
LOADING/EJECTING A DISC Loading a Disc 1. T ur n the ignition on the accessory position. 2. Press the POWER button (1). 3. Insert the disc with printed side facing up into the disc slot (2). 4. The player starts playback automatically. Ejecting a Disc Pr ess (EJECT) button (3) to eject the disc.
16 OPERA TION BASIC OPERA TION Tu r nig the player on/off Pr ess the POWER button on the front panel or (POWER) button on the remote control to turn the player on or off.
17 OPERA TION Remote Sensor Ther e is a r emote sensor on the front panel. On the monitor, there is another remote sensor to receive remote control signal.
18 OPERA TION DISC (DVD, VCD, CD, MP3) OPERA TION Switching to DVD mode press MODE button on remote to select DVD mode. Stopping Play - Briefly pr ess the (Stop) button to stop the unit playback, when the (Play) button is pressed, normal playback will continue.
19 Disc Search (GOTO) FOR DVD Pr ess GOTO button twice, the scr een will display the following message: Y ou can select the item you want to watch through TIME setting by using numeric buttons and ENTER key .
20 OPERA TION (4) Press DISPLA Y for the fourth time: TOT AL REMAIN 00:40:35 TOT AL TRACK : 14 TRACK : - 01 (5) Press DISPLA Y for the fifth time: The message on the scr een will be clear ed.
21 - Some discs only contain one subtitle language. - When no dif ferent subtitle language ar e r ecorded, will be displayed at screen left top corner .
22 Smart navigation MP3 Disc Play MP3 disc is playing as the format of FOLDER. For example: In stop mode, Use on the remote control to select the item or folder (such as CD01, CD02...) and press ENTER button on the remote control to confirm, then select the desired track (such as 001 PLUMT , 002 RZID.
23 SETUP INITIAL SETUP SETUP MENU --- MAIN P AGE 1. Press SETUP on the remote control in the STOP mode. (Press the button twice to ensure that the player is in STOP mode.) 2. The initial SETUP menu is displayed. 3. Select the pr eferr ed item by using the / buttons.
24 SETUP --- GENERAL P AGE --- PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution.
25 SETUP --- GENERAL P AGE --- SCR SA VER setup Select the SCR SA VER ON/OFF . SPEAKER SETUP --- SPEAKER SETUP P AGE --- This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons.
26 SETUP PREFERENCES SETUP --- PREFERENCES PAGE --- TV type setup This player can play discs r ecorded in either NTSC format. Select NTSC format, when the unit is connected to NTSC TV . Select AUTO format, the player TV output format will be accor ding to the DVD disc format.
27 SETUP --- PREFERENCES PAGE --- SUBTITLE language setup Select the preferr ed SUBTITLE language by using the cursor buttons. --- PREFERENCES PAGE --- DISC MENU language setup Select the pr eferred DISC MENU language by using the cursor buttons.
28 SETUP --- PREFERENCES PAGE --- DEF AUL TS Select reset to r evert to factory initial settings. RESET TV TYPE AUDIO SUBTITLE DISC MENU P ARENTAL P ASSWORD DEF AUL TS SMAR T NA V MAIN P AGE NO MENU W.
DEF AUL TS T ABLE General Setup TV Display Normal/LB PIC Mode AUTO Angle Mark ON OSD Language English Captions ON SCR Saver ON Speaker Setup Downmix Stereo Audio Setup Audio Out SPDIF/RAW OP Mode Line.
TROUBLE SHOOTING If it appears that your DVD unit is faulty , first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to r epair the player yourself, as this will invalidate the warranty .
TROUBLE SHOOTING BUTTONS DO NOT WORK Turn the player off and on with the power on/of f button on the fr ont of the player . Press Reset button on the front of the DVD unit. 31 Check if the audio format of the selected audio language matches your receiver's capabilities.
SPECIFICA TIONS DVD Supply voltage : 12V DC (11V -15V), test voltage 14.4V , negative ground Curr ent consumption : Less than 2A Signal system : Compositive video 1.
88-V1952-02 www .pyleaudio.com.
Ein wichtiger Punkt beim Kauf des Geräts PYLE Audio PLDVD65IN (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie PYLE Audio PLDVD65IN noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für PYLE Audio PLDVD65IN - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von PYLE Audio PLDVD65IN reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über PYLE Audio PLDVD65IN erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon PYLE Audio PLDVD65IN besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von PYLE Audio PLDVD65IN verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit PYLE Audio PLDVD65IN. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei PYLE Audio PLDVD65IN gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
