Benutzeranleitung / Produktwartung I3-380IP04 des Produzenten Provision-ISR
Zur Seite of 50
2 Mega Pixel W ater-Proof IR Network Camera User Manual Please read this instruction carefully for correct use of the product.
PROVISION-ISR I3 -380IP04 User Manual 720P 30m IR Fixed Lens IP Bullet Camera For H.264 IP Camera All rights reserved.
Before use this product Before operation, we strongly advise users to read this manual and keep it properly for using later. This is product instructions not quality warranty.
IP CA MERA USER MUANU AL T able of Contents 1 Introduction ......................................................................................................... 1 1.1 Summarization ..................................................................
Page 1 IP CA MERA USER MUANU AL 1 Intr oduction 1.1 Summarization This IP-CAMERA (short for IP-CAM) is designed for high performance CCTV solutions. It adopts state of the art video processing chips.
Page 2 IP CA MERA USER MUANU AL 2 Installation 2.1 Install IP-CAM to Ethernet Network The connection of digital video server is show below . Figure 2-1 Connection Please connect the PC and IP -CAMERA in accordance with the above picture. The connection steps are shown as below: S tep 1: Connect the monitor , microphone and network to the device.
Page 3 IP CA MERA USER MUANU AL 3 IE Remote Access IP -Cam can be connected through LAN or W AN. Here only take IE browser (6.0) for example. The details are as f ollows: 3.1 LAN In LAN, there are two ways to access IP -Cam: 1. Access through IP-T ool; 2.
Page 4 IP CA MERA USER MUANU AL For example, the network segment of this computer is 192.168.13.x under the local config table. So, please modify the IP address, Gateway of IP-Cam which must be in the same network segment with the computer . Modifying the network , you have to input the password and click “OK” button to save the setting.
Page 5 IP CA MERA USER MUANU AL IP address: 192.168.226.201 Subnet Mask: 255.255.255.0 Gateway: 192.168.226 .1 HTTP: 80 Data port: 9008 The first time you used the IP-CAM , you should connect the device with the above default settings. Here take the W indows XP O S for example to introduce the setting steps.
Page 6 IP CA MERA USER MUANU AL S tep 4: Input user name and password in the login dialog box and click “OK” button to enter into the live interface. Y ou can manage and setup the IP-CAM in the IE client , such as changing IP address, upgrading the software .
Page 7 IP CA MERA USER MUANU AL 4 Remote Pr eview 4.1 The Remote Preview Interface Fig 4- 1 Remote Preview When motion detection alarm is triggered, the people icon turns red. Click icon to zoom in the preview image to suitable size . Drag the cursor on the enlarged image to view suitable prev iew a rea.
Page 8 IP CA MERA USER MUANU AL Fig 4- 2 rec ord playback interface After selecting the record date, the record files will be displayed in the record file list box. User can double click a certain record file to playback or check a certain file. Then click Play button to do playback.
Page 9 IP CA MERA USER MUANU AL scroll bar to view all snapped pictures. Fig 4-4 Single Snap Fig 4-5 Multi-picture S nap.
Page 10 IP CA MERA USER MUANU AL 5 Remote Live Surveillance Functions of remote configurations include: System Configuration, Video Configurati on, Alarm Configuration, Network Configuration and Advanced Configuration. User should firstly select the menu on the left, and then setup the relative parameters.
Page 11 IP CA MERA USER MUANU AL 5.1.2 Date & Time Configuration Setting steps: 1. Enter into "System Configuration" “Date & Time” . Refer to Fig 5-2: 2. Select “Modify Time " to self-define time. Choose "Time Zone" according to user’s location.
Page 12 IP CA MERA USER MUANU AL 2. User can adjust Brightness, Contrast, Hue and saturation of the picture. 3. Select white balance mode. 4. Sharpen, denoise , white balance, frequency, CVBS format and Day-Night mode are adjustable. 5. User also can enable the image mirror and image overturn function.
Page 13 IP CA MERA USER MUANU AL 5.2.4 Video Mask You can set 4 mask area at most. Fig 5-6 Video Mask Enable the mask, select color and tra nsparent of the mask area and then drag the mouse to set the mask area. This will take y ou see a gridding area.
Page 14 IP CA MERA USER MUANU AL Fig 5-7 Motion Detection Area 5.3.2 Motion Detection T rigger 1. Enter into “Alarm Configuration" "Motion Detection Trigger " to display a interface as shown in F ig 5-8: 2. Check "Enable alarm" check box.
Page 15 IP CA MERA USER MUANU AL 5.3.3 Motion Detection Schedule Enter into “Alarm configur ation" "Motion Detection schedule" interface as shown in Fig 5-9: Week schedule User could set the alarm time from Monday to Sunday for alarm everyday in one week.
Page 16 IP CA MERA USER MUANU AL Fig 5- 10 Port Config 2. Input port number for IE access in the "H TTP Port" textbox. 3. Input the port number for audio & video transmission in the "Data Port" textb ox.
Page 17 IP CA MERA USER MUANU AL Fig 5-12 Transit 2. Check “transit enable”. Then save the setting. 3. Input www.upnpicp.com in IE address; download and install Active X. Then a window shows up as Fig 5-13: Fig 5-13 Login 4. Input the only device ID of the IP-CAM or user-defined name.
Page 18 IP CA MERA USER MUANU AL 1. Check “ Do you want IP Camera to connect Server. 2. Check the IP address and port of the transfer media server in the ECMS/NVMS. Then enable the auto report in the ECMS/NVMS when adding a new devi ce. Then input the remaining information of the device in the ECMS/NVMS.
Page 19 IP CA MERA USER MUANU AL 2) Fill in the registration form, then click " Submit " 3) Fill in the host name you want to apply for and press " Request Domain " (for example "home" ) 4) If there is no problem with the domain registration you will see the following message: “ Y our domain was successfully created.
Page 20 IP CA MERA USER MUANU AL Fig 5-16 DDNS Config Note : The steps to band a domain name for video surveillance server are as follows. Firstly, register a user name and a password to log on the website of service supplier, and then apply for a domain name online for the server.
Page 21 IP CA MERA USER MUANU AL Step 2: Click to enter the website. Step 3: Click "New User" in the right of homepage to reg ister. For example: User ID is ‘abc’, and password is ‘123456’. The register dialog display as below: (2) Login Step 1: Return to homepage after registering successfully.
Page 22 IP CA MERA USER MUANU AL 3. Application Connect IP-CAMERA to the Network Client. Step 1: After popping up the login interface, fill in "Serv er" textbox with ‘*.dns2p.com’ to visit the Network Client of the IP-CAMERA. T he domain set in ‘ (3 ) Domain Setup ’.
Page 23 IP CA MERA USER MUANU AL icons for netw orked UPnP devices” in the “Network Tasks” list box . Then a information window will pop up. C lick “YES” button to see a “Windows Comp onents Wizard” dialog box pop up as show n below. Then press “ Next” to continue.
Page 24 IP CA MERA USER MUANU AL 4.Select the secure connection type at the Secure Connection pull down list according to user ’ actual needs 5. Receival email address list: add email address into the list 6. Receival email address: receiver ’ s e -mail address 7.
Page 25 IP CA MERA USER MUANU AL Upgrade. 5.5.1 User Configuration Enter into "User Configuration" interface. Refer to Fig 5-22: Add user: 1.
Page 26 IP CA MERA USER MUANU AL MAC” text box. 6. Click “OK” button to modify u ser’s password and binding MAC address successfully. Delete user: 1. Select the user which needs to delete in the user configuration list box. 2. Clicking “Delete” button will pop up a confirm dialog box .
Page 27 IP CA MERA USER MUANU AL Fig 5-25 Security Configuration 5.5.3 Configure Backup & Restor e Enter into Advanced configuration Configure Backup & Restore Interface . t o Fig 5-26. Import & Export Configuration : User can import or export the setting information from PC or to device.
Page 28 IP CA MERA USER MUANU AL Fig 5-27 Reboot device interface 5.5.5 Upgrade Enter into Advanced Configuration — Upgrade interface shown as Fig 5-28: 1. Click “Browse” button to select the save path of the upgrade file 2. Click “ U pgrade server firmware” button to start upgrading the application program 3.
Page 29 IP CA MERA USER MUANU AL 6 Mobile Surveillance This IP-CAM supports mobile surveillance by phones with Windows mobile, iPhone, Android and Blackberry OS. Please check the operation s ystem version of mobile before use; and connect the IP -CAM to Internet.
Page 30 IP CA MERA USER MUANU AL 6.2 By Phones with iPhone OS Install through Iphone. S tep 1: Open App Store software as shown in the figure on the left. S tep2: Search “ Provision Cam ” and click “Free” button as shown in the figure on the right.
Page 31 IP CA MERA USER MUANU AL "Provision Cam" Instruction 1. Login Step 1 : Choose network type. There are two network connection ways: 3G/3G +WIFI, enhanced video quality. This network supports main stream and sub stream. The real-time image will be displayed by using sub stream.
Page 32 IP CA MERA USER MUANU AL ： Log off button. Click this bu tton to return to the login interface. ： Screen mode button. Y ou can choose 1 ， 4 ， 6 ， 8 ， 9 ， 13 or 16 screen display mode.
Page 33 IP CA MERA USER MUANU AL button behind the device name to delete this device. Edit device: Click butt on behind the device name to edit the information of this device. Backup & restore: It is recommended to click “Backup” butt on to reserve the information of all devices.
Page 34 IP CA MERA USER MUANU AL Fig 2 Fig 3 Fig 4 Fig 5 5. CMS Function This function makes multi -device managements and preview come true. S tep 1 : Click to enable CMS function. When this icon turns green, it means this function is enabled . S tep 2 : Click to choose channel as shown in the right picture.
Page 35 IP CA MERA USER MUANU AL Favorite chan nels of the device St ep 1 : Click to enter int o device management l ist. Click the d evice name to exte nd cha nnel. Enlighten the channels to save favorite channels as shown in the following picture on the left.
Page 36 IP CA MERA USER MUANU AL 6.3 By Phones with A nd roid Software Installation S tep 1 : Run “ Play S tore” (or Google market) program. S tep 2 : Search “ Provision Cam ”. S tep 3 : Press “Install” button. S tep 4 : Install the software subject to the notes.
Page 37 IP CA MERA USER MUANU AL Main Menu Live V iew Record Playback: Click “ Playback ” in the main menu interface to enter playback interface. Then choose the channel y ou want to playback. This will take you to see the record file. Click this file to play .
Page 38 IP CA MERA USER MUANU AL Modify Server: Click butt on to modify the server in formation. Delete Server: Click button to delete the server information. Settings: In the main menu interface, click “ Settings ” to enter the settings interface where you can config ure local settings.
Page 39 IP CA MERA USER MUANU AL 7 Use method for IP-T OOL Updating through IP-T ool Note: Do not cut off powe r supply and internet w hen updating; If the device is unable to start because of the failure of upgrade, it needs to r etrofit.
Page 40 IP CA MERA USER MUANU AL Modify IP address and click OK button to exit the dialog box, IP-T ool will display the new IP address. Upgrading Software Select the device and right click to choose “Update software” menu. Input the username an d password.
Page 41 IP CA MERA USER MUANU AL Enter into Kernel upgra de dialog box , input user name and password, click “Browse” to select the Update file (mboot8180-8180) and click “Update” button to start updating. When upgrading, please do not disconnect PC to device and make sure the power is on.
Page 42 IP CA MERA USER MUANU AL 8 Q & A Q: How to find my password if I forget it ? A ： Reset all settings by IP-Tool or contact your dealer. Default IP: 192.168.226.201 User name: admin Password: 123456 Q ： Fail to connect devices through IE browser , why? A: Network doesn’t connect well.
Page 43 IP CA MERA USER MUANU AL Fig 4-1 Fig 4-2 ④ then click ok to finish setup. b. Other plug-ins or anti-virus blocks ActiveX. Please uninstall or close them. Q ： No sound can be heard, why? A ： Without connect audio input device. Please connect and try again.
Page 44 IP CA MERA USER MUANU AL 9 Specification Model I3 -390IP04 Image Sensor Sony Exmor IMX138 1/3" CMOS Effective Pixels 1280x720 Electronic Shutter 1/25s ~ 1/100000s Day & Night ICR Min.
Page 45 IP CA MERA USER MUANU AL Notes:.
Page 46 IP CA MERA USER MUANU AL.
Ein wichtiger Punkt beim Kauf des Geräts Provision-ISR I3-380IP04 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Provision-ISR I3-380IP04 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Provision-ISR I3-380IP04 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Provision-ISR I3-380IP04 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Provision-ISR I3-380IP04 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Provision-ISR I3-380IP04 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Provision-ISR I3-380IP04 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Provision-ISR I3-380IP04. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Provision-ISR I3-380IP04 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
