Benutzeranleitung / Produktwartung Automated Optical Disc Printing System des Produzenten Primera Technology
Zur Seite of 42
012307-510921-(04) Automated Optical Disc Duplication & Printing System AUTOPRINTER TM Automated Optical Disc Printing System © 2007 All rights reserved USER’S MANUAL For Macintosh and PC 510921PM.
ii Notices : The information in this document is subject to change without notice. NO W ARRANTY OF ANY KIND IS MADE WITH REG ARD TO THIS MA TERIAL, INCL UDING, BUT NOT LIMITED TO, THE IMPLIED W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE.
iii T able of Contents Section 1: Getting Started ...............................................................................1 A. Choosing a Good Location ................................................................1 B. Unpacking and Inspection.
There are interactive features that will allow you to jump to different locations within the document. Each listing in the T able of Content s is interactive. Place the cursor on either the words or the p age number . A small hand with a pointing finger icon appears.
Getting Started 1 Section 1: Getting Started THANK Y OU… ...for purchasing the BravoPro TM A utoPrinter . The BravoPro is the perfect all-in- one solution for printing professional looking CDs and DVDs. Operation is simple and completely automatic once a job has been started.
2 Getting Started B. UNP ACKING AND INSPECTION While unpacking your Printer , inspect the carton to ensure that no damage has occurred during shipping.
Getting Started 3 C. IDENTIFYING THE P ARTS F r ont Panel and T op This illustration shows the Printer , its Control P anel, Buttons, LED indicator lights, Input and Output Bins and other components. The Robotic Disc T ransporter moves discs from the Input Bin, to the printer , and finally to the Output Bin.
4 Getting Started The Input/Output Bins are situated under the top cover of the Printer . The bins will hold up to 50 discs. The right-side bin is the Input Bin for blank media; the left-side bin is the Output Bin for finished discs. The Front Cover is a durable plastic cover that will protect the Printer from dust and interference.
Getting Started 5 • F ree hard drive space of at least 10 GB. • A vailable USB P ort. If your PC does not have these minimum system requirements, system perfor mance may not be acceptable. E. MAC SY STEM REQUIREMENTS Before getting started, it is important for you to verify that your computer meets the recommended system requirements.
6 Getting Started 2. The Robotic Disc T ransporter will pick a disc from the Input Bin. After each disc is placed in the printer , the Robotic Disc T ransporter checks the input stack to "see" if multiple discs were accidentally picked. 3. Printing will now begin.
Hardware and Software Setup 7 Section 2: Hardwar e and Softwar e Setup Set-Up This section will describe the step-by-step process of setting up your Printer . This includes infor mation on how to load the supplies (ink and disc media) necessary to start printing discs.
8 Hardware and Software Setup c. Double-click on the A utoPrinterPro Installer .mpkg file icon. F ollow the on-screen instr uctions. d. The volume containing the operating system should be selected for installation. Click the Continue button. All components will be installed to their proper locations.
Hardware and Software Setup 9 Refer to the following steps when loading discs in to the Printer: • Open the front cover of the Printer • The Printer will automatically position the cartridge carrier and Robotic Disc T ransporter to the center position allowing for easy access to the bins.
10 Hardware and Software Setup Step 3: Connecting the USB 2.0 Cable/Installing the Driver Connect the Printer to your PC or Mac with your beige USB 2.0 Cable. If you are using a PC: If you are using a PC, after a few moments, W indows will tell you it has found new hardware and is looking for software to install it.
Hardware and Software Setup 11 If you are using a Macintosh: When connecting USB to a Mac it may be necessary to A dd the printer via the Printer Setup Utility . 1. Open the Printer Setup Utility located in the Applications - Utilities folder . 2. Click Ad d .
12 Hardware and Software Setup Step 4: Installing Ink Car tridges • W ith the cover open, press the Ink Cartridge Button to move the Ink Cartridge Carrier to the load position and open the ink cartridge covers. • Remove each ink cartridge from its packaging.
Printing Discs on a PC 13 Section 3: P rinting Discs on a PC The printer driver allows you to adjust quality , speed and other settings. Both will be described in detail in this section.
14 Printing Discs on a PC NO TE: Most applications allow you to change these same printer driver options from their "Print" and/or "Printer Setup" screens. This means that you don't have to go back to the main printer setup window each time you want to change a setting or option in the printer driver .
Printing Discs on a PC 15 Business Card Disc - This prints to the 58mm by 86mm rectangular business card CD -r media (Primera P art Number 53340). Hockey Rink Disc - This setting is for the rounded edge or , "Hockey Rink", shaped business card CD-r media (Primera P art Number 53341).
16 Printing Discs on a PC Ink Saturation This option controls the ink saturation of the printed image. When printing onto the printer manufacturer's T uffCoat CD media, this option can be left at its default setting of 100%.
Printing Discs on a PC 17 centered when printed on a CD. T o do this, refer to the following steps: 1. V erify that a disc and a color ink cartridge are installed in the Printer . It is important to use the same disc you normally use for your publishing because different brands of discs may vary slightly in size.
18 Printing Discs on a PC 6. Select the OK button. Y our images should now be centered when printed on a disc. After your selections have been made, close out of the printer setup window . Y ou are now ready to go to an application program and print. All printer driver selections will stay the same until you change them.
Printing Discs on a PC 19 Clean/Purge Select Clean/Purge button to send a simple test pattern to the printer . Be sure to have a disc in the P rinter's input bin and the front cover closed. The test pattern purges ink through nozzles of your ink cartridge to clear any blockages.
20 Printing Discs on a PC B. CREA TING A PRINT LABEL USING SURETHING The SureThing Disc Labeler software included with your Printer is a great tool for creating professional looking discs. Y ou can use SureThing's Smart Designs to quickly label a disc, or easily import your own design in many popular file formats.
Printing Discs on a PC 21 4A. Open the text panel by clicking the arrow on the text button. A dd text by selecting one of the options below . T o create text that follows the curve of the disc choose A dd Circular T ext. 4B. Y ou may also choose from sev- eral SureThing smart designs.
22 Printing Discs on a PC D. USING KIOSK MODE Kiosk Mode allows you to use both of Printer's Bins as input, doubling your disc capacity from 50 discs to 100 discs. In this mode, the finished discs will be deposited out through the front "reject area" of the Printer .
Printing Discs on a PC 23 Kiosk mode is enabled as follows: Click the Start button. F or Windows 2000 point to Settings and click on Printers . F or XP Professional click on P rinters and Fa x e s . For XP Home click on Control P anel , then click on Printers and Other Hardware , then click on Printers and Fa x e s .
24 Printing Discs on a Mac Section 4: P rinting Discs on a Mac A. PRINTED LABEL FORMA T REQUIREMENTS Y our printer driver allows you to create labels in most any graphics application. The driver will center the image and automatically crop it to the shape of a CD.
Printing Discs on a Mac 25 4. Before you print or save your image in another format, either hide the template layer or delete the template layer . The circular shape and center cut out should not be printed. Use it only as a guide to layout your image.
26 Printing Discs on a Mac 2. The paper sizes for the Printer refer to the type of disc to which you will be printing. The available sizes are: CD/DVD, Business Card Disc, 80mm CD Hock ey Rink Disc and Digital V inyl Disc. Print Settings Click Print Setup to see the driver window and all of its settings.
Printing Discs on a Mac 27 The following is a description of the printer driver settings: • Cartridge to use The Black and Color setting will use both cartridges when printing your image. Color will only use the Color Cartridge, and Black Only will only use the monochrome cartridge for printing.
28 Printing Discs on a Mac • Outer Margin The Outer Margin refers to where the printing will cut off around the outer edge of your disc. The size of the printable surface can var y from one type of media to the next.
Printing Discs on a Mac 29 Y ou can also launch the Configuration Utility from the Disc Publisher P ro printer settings in any printing application by clicking File then Print and selecting P rinter Settings . In Printer Settings you will find a button to launch the Configuration Utility .
30 Printing Discs on a Mac nozzles are not fully clear after a few cleaning prints, it may be necessary to remove the cartridge and actually clean the print head by gently blotting the nozzles with a moist cloth or paper towel and replace it in the Printer .
Printing Discs on a Mac 31 prompted to open the Printer's front cover , rotate the printed disc 180 degrees, reload it into the input, and close the cover . Click OK when ready and the Printer will pick the disc and print another scale of numbers.
32 Printing Discs on a Mac Look at the finished alignment disc and pick the numbers that come closest to lining up with one another . F or instance, on the disc shown in this manual, the vertical alignment is 2 and the horizontal alignment is 0. Enter this in the alignment dialog box.
Interpreting the Printer ’s Indicator Lights 33 Section 5: Interpr eting the Printer's Indicator Lights The P ower and Busy LED indicator lights located on the top of the Printer can tell you a lot about what is happening inside the Printer .
34 Maintenance and T r oubleshooting Section 6: Maintenance and T r oubleshooting The Printer is designed to operate for e xtended periods of time with very little attention. In fact, no regular maintenance is recommended other than cleaning the outside case.
Maintenance and T r oubleshooting 35 C. CLEARING A MEDIA JAM If a disc should become jammed inside the printing area of the Printer , with the lid closed press the Cartridge Button. This will eject the Printer T ray . Then open the lid. The Cartridge Carrier will move to the center position automatically .
36 T echnical Specifications Section 7: T echnical Specifications Model A uto Printer P ro Printing Method Ink-Jet Printing Resolution 4800 x 1200 dpi, 1200 x 1200 dpi, 600 x 600 dpi Ink T ypes Dual C.
Index 37 Inde x Alignment Calibration ..................................................................30 Cartridge T ype ................................................................................15 Centering T est Print .......................
Printed in the United States of America P/N 510921 510921PM.qxd 1/25/2007 8:53 AM Page 40.
Ein wichtiger Punkt beim Kauf des Geräts Primera Technology Automated Optical Disc Printing System (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Primera Technology Automated Optical Disc Printing System noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Primera Technology Automated Optical Disc Printing System - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Primera Technology Automated Optical Disc Printing System reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Primera Technology Automated Optical Disc Printing System erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Primera Technology Automated Optical Disc Printing System besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Primera Technology Automated Optical Disc Printing System verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Primera Technology Automated Optical Disc Printing System. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Primera Technology Automated Optical Disc Printing System gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.