Benutzeranleitung / Produktwartung EXPERIENCE STRENGTHTM C-LINE CW34871-101 des Produzenten Precor
Zur Seite of 45
P/N CW34871-101, en 1 November 20 08 ©2008 Pr ecor Inc orporated Pr ecor Inc orporated 20031 142nd Av e NE, P .O. Box 7202, W oodinvill e, WA USA 98072-4002 1-800-347-4404 • www.
Owner’ s Manual Experience Str ength™ C-Line.
.
Experience Stren gth™ C-Line Owner’s Manual: Important Sa fety Guidelines for Owners 1 Important Saf ety Guidelines for Owner s F ollow these guidelines to maintain pr oper working condition of the equipment: Important: Do not modify the equipment or an y of its parts, or permanently remove any part from the equipment.
Experience Stren gth™ C-Line Owner’s Manual: Important Sa fety Information for Users 2 Important Saf ety Information f or Users Befor e beginning any fitness pr ogram, yo u should obtain a compl ete physical examination fr om your physician.
Experience Strength™ C-Li ne Owner’s Manual: Tabl e of Contents 3 T abl e of Contents Important Safety Guidelines for Owners ........................................ 1 Safety Approval ...................... .................... ...................
Experience Strength™ C-Li ne Ow ner’s Manual: Be fore You Begin 4 Bef or e Y ou Begin Pr ecor r ecommends implementing a th or ough maintenance pr ogram that incorporat es r egular safety inspections by qualified main tenance technicians as outlined in this manual.
Experience Strength™ C-Li ne Ow ner’s Manual: Be fore You Begin 5 Sh r oud Re mova l The Experience Str ength product line includes a shr oud that must be r emoved to perf orm the maintenance described in this manual. Important: Do not remove the shroud whil e the equipment is in use.
Experience Strength™ C-Li ne Ow ner’s Manual: Be fore You Begin 6 Obtaining Service Y ou should not attempt to service the str ength equipment, ex cept for the maintenance t asks described in this manual. If any items ar e missing, contact y our dealer .
Experience Strength™ C-Li ne Ow ner’s Manual: Daily Inspection 7 Dail y Inspection Y ou will need to perform the foll owing tasks each day to maintain the equipment and keep it operating smoothl y: • Clean any uphols tery on the equipment. • Inspect pads for wear .
Experience Strength™ C-Li ne Ow ner’s Manual: Daily Inspection 8 Inspect Cabl es and End Connections CAUTION: Carefull y inspect the cabl es, pulleys, f asteners, and r elated har dware r egularly. Replac e any cable at the fir st sign of wear using onl y Prec or-sup plied r eplacement parts.
Experience Strength™ C-Li ne Ow ner’s Manual: Daily Inspection 9 Figure 3: Cabl e bolt must have a mini mum of ten threads into the selector stem Check W arning and Instructional Labels Inspect warning and instructional labels daily t o make sur e that all the information ca n be clearl y read.
Experience Strength™ C-Li ne Ow ner’s Manual: Daily Inspection 10 Pr ecor pr oducts come equipped with a number of standar d warning labels. The foll owing two figur es show sample warning labels .
Experience Strength™ C-Li ne Ow ner’s Manual: Weekly In spection 11 W eekl y Inspection This section cov ers the tasks you should perform each w eek to maintain the equipment. Perform the f ollowing t asks as appropriate f or the unit you are maintaining: • Condition and deep cl ean upholstery .
Experience Strength™ C-Li ne Ow ner’s Manual: Weekly In spection 12 Cl ean and Lubricate Guide Rods Inspect the exposed ar eas of the guide ro ds for cl eanliness.
Experience Strength™ C-Li ne Ow ner’s Manual: Weekly In spection 13 Inspect Pull eys Pr ecor uses pr ecision ball bearing idle r pulle ys to guide the cabl e smoothly . Inspect each pulle y for damage, includin g hairline cracks, chips, or mis sing sections.
Experience Strength™ C-Li ne Ow ner’s Manual: Weekly In spection 14 • Linear Bearings: These bearings allow weight plates and other mechanical parts to trav el smoothl y along guide r ods. (Refer to the foll owing figur e.) Inspect the ends of each guide rod to mak e sure the y ar e fas tened corr ectly and all bolts ar e tight.
Experience Strength™ C-Li ne Ow ner’s Manual: Mont hly Inspection 15 Monthl y Inspection This section cover s the tasks you should perf orm each month to maintain the equipment. Perform the f ollowing t asks as appropriat e for the unit y ou ar e maintaining: • Inspect frames and mov ement arms.
Experience Strength™ C-Li ne Ow ner’s Manual: Mont hly Inspection 16 Lubricate Pop Pins Pull out the pop pin as far as it goes and appl y a small amount of silicone spray lubricant. Wipe off any e xc ess lu bricant with a cl oth. (Refer to the foll owing figure.
Experience Strength™ C-Li ne Owne r’s Manual: Annual Mainte nance 17 Annual Maintenanc e Perf orm these tasks on an annual basis, as appr opriate for your equipment. W eight Stack Annual Maintenanc e Once a year, Pr ecor r ecommends disassembling the weight stack to cl ean and inspect it thor oughly .
Experience Strength™ C-Li ne Ow ner’s Manual: Commerc ial Strength Equipme nt Limited Warranty 18 Commercial Strength Equipment Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT .
Experience Strength™ C-Li ne Ow ner’s Manual: Commerc ial Strength Equipme nt Limited Warranty 19 Disclaimer and Release. The warranties provided herein are the ex clusive warranties given by Precor and supersede any prior, contra ry or additional representations, whether oral or written.
Experience Streng th™ C-Li ne Owner’s Manual: Notes 20 Notes:.
.
Experience Str ength™ C-Line Owner’ s Manual CW34880-101, en 1 November 2008 Precor is a r eg istered trademark of Precor Incorporated. Copyright 200 8 Precor Incorporated. Specifications subj ect to change with out notice. www.prec or.com NOTICE: Prec or is widely rec ognized for its inno vative, awar d winning designs of exer cise equipment.
Assembl y and Deliv ery Guide Experience Str ength™ C-Line Abdominal.
.
Table of Contents Getting Started ................................................................... 2 Open the Box ....................................................................... 2 Required Tools .............................................
Getting Started Note: Assemble the weight stack shroud and bottle holder/accessory tray after the equipment is positioned in the facility. Assembly takes about 15 minutes to co mplete. If this is the first time you have assembled this type of equipment, allow more time.
Attach the Feet and Foot Covers To Attach the Adjustable Foot: Note: The equipment may have more th an one adjustable foot. Use the same instructions to install multiple adjustable feet. 1. Align the adjustable foot with the hole built into the cylindrical leg.
To Attach the Foot Covers: Note: When you install each foot cover, no gap should appear between its front and back halves. Also, the opening in the top of the assembled foot cover should align with the angl e of the fra me leg attached to the foot. 1.
To Adjust the Stability Foot: The stability foot is located centrally underneath the weight stack frame and should rest evenly on the floor. If the f oot is not resting firmly on the floor, perform the following procedure. Note: Adjustments to the stability foot must be completed before the shroud is attached.
Attach the Bottle Holder/Accessory Tray To Attach the Bottle Holder/Accessory Tray to the Weight Tower Frame: 1. Locate the bottle holder/accessory tray. Snap the two pieces together and set them aside. Note: For this unit, the bottle holder/a ccessory tray attaches to the side of the front weight tower upright.
Assemble the Shroud Before Beginning the Assembly All cables should be correctly seated and tensioned. Make any adjustments before you install the shroud assembly. Caution: Do not over tighten fasteners. Do not use power tools t o tighten screws attaching the weight s tack shroud components.
3. Slide the bottom edge of the front shroud into the space between the exercise station and the weight stack frame. 4. When the plastic hooks on the fron t shroud line up with the large square holes at the top of the weight stack frame, pl ace the hooks into the holes.
2. Fasten the cover plate to the second lower corner cover using: Two #8 self-tapping screws Figure 12: Attachment o f cover p late to the lowe r corner co ver 3.
To Install the Upper and Lower Back Shroud: 1. Position the lower back so that its tabbed end is at the top. Note: Do not tighten any of the screws until all four screws are attached. 2. Line up the two screw holes near the upper corners of the lowe r back with the corresponding holes in the weight stack frame.
Abdominal Assembly and Delivery Guide: Assemble the Shroud 11 7. Insert the tabs in the top corners of the upper back into the square holes at the top of the weight stack frame and push the corners in until the tabs lock into place. To Install the Top Cover: 1.
Disassemble the Equipment This unit arrives fully assembled except for the shrouds and the bottle holder/accessory tray. In some cases, you may need to disasse mble the unit before you move it. WARNING: You will need assistance to disas semble this unit.
To Separate the Weight Tower from the Exercise Station: Note: The exercise station is attached to the weight tower at a side location and a bottom location. 1. Locate the side area where the exercise station is bolted to the weight tower. 2. Remove the upper and lower bolts using a ³₁₆ ” hex key and a 1” open-end wrench.
To Reroute the Cable During Reassembly: 1. Check the position of the cable on the movement arm cam and all pulleys to ensure that they are properly seated. Note: To prevent cable damage in the following step, the cable must be inside the hook and must rest in the central grooves of the pulleys.
WARNING: At the end of the following step, a minimum of 10 threads on the cable bolt must be inserted with in the weight stack’s selector stem. Verify that th e cable is fully seated in all pulleys before installing the cable bolt into the st em. 5.
Notes Abdominal Assembly and Delivery Guide: Notes 16.
.
Assembl y and Delivery Guide CW34841- 141 re v C, en 1 F ebruary 2009 Precor is a r eg istered trademark of Precor Incorporated. Copyright 200 9 Precor Incorporated. Specifications subj ect to change with out notice. www.prec or.com NOTICE: Prec or is widely rec ognized for its inno vative, awar d winning designs of exer cise equipment.
Ein wichtiger Punkt beim Kauf des Geräts Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
