Benutzeranleitung / Produktwartung CX700 des Produzenten Polycom
Zur Seite of 58
September, 2007 Edition 1725-31402-001 Rev. A User Guide for the Polycom ® CX700 IP Phone.
Polycom Inc. 4750 Willow Road Pleasanton, CA 94588-2708 USA No part of this document may be reproduce d or transmitted in any form or by any means, el ectronic or mechanical, for any purpose, without the express written permission of Polycom, Inc. Under the law, reprod ucing includ es translating into another language or format.
iii About This Guide Thank you for choosing the Polycom CX700 IP phone which enables a new era in unified communications currently una vailable with traditional desk top phones.
User Guide Polycom CX700 IP Phone iv.
v Contents About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii 1 Getting Started with Your Poly com® CX700 IP Phone . . . . . 1–1 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Guide Polycom CX700 IP Phone vi Searching For a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11 Viewing a Contact Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11 3 Using the Basic Features of Your Polycom® CX700 IP Phone .
1 - 1 1 Getting Star ted with Y our Polycom ® CX700 IP Phone This chapter provides basi c installation ins tructions and informati on for obtaining the best performance with the Polycom CX700 IP phone. The Polycom CX700 IP phone provides a complete phone experience for Microsoft Office Communicator 2007 .
User Guide Polycom CX700 IP Phone 1 - 2 Par ts List The following components are included in your Polycom CX700 IP phone package: • Polycom CX700 IP phone • handset & handset cord • Network .
Getting Started with Y our Polycom® CX700 IP Phone 1 - 3 • AC/DC Power Adapter and Power Cord • Quick Start Guide and registration card Check this list be fore installat ion to en sure that you have received each item. If you are missing any items, c ontact your system administrator.
User Guide Polycom CX700 IP Phone 1 - 4 2. Connect the headset (optional) to the headset jack on the back of the phone (next to the handset jack). Connecting Network and Power Source Use Power over Ethernet (PoE) for network and power source connections unless otherwise directed by your system admi nistrator.
Getting Started with Y our Polycom® CX700 IP Phone 1 - 5 below, then plug one end of in the country specific power cord into the power adapter and the other end into an available AC outlet. The phone will begin to power up. For more information on logging in, refer to Logging in on Your Polycom CX700 IP Phone on page 1-7 .
User Guide Polycom CX700 IP Phone 1 - 6 Features of Y our Polycom CX700 IP Phone The features of the Polycom CX700 IP phone are: 1. Graphic Display —Shows information about call s, messages, ti me, date, and other relevant data and allows you to enter commands and select contacts through the touch screen.
Getting Started with Y our Polycom® CX700 IP Phone 1 - 7 13. Fingerprint Reader —Allows you to log on to your Polycom CX 700 IP phone with a swipe of your finger.
User Guide Polycom CX700 IP Phone 1 - 8 2. Using the graphic display’s soft keyboard, enter the following: — Your Microsoft Office Communicat or sign-in name (for example, user1@polycom.com) — Your network domain and username (for example, polycomuse r1) — Your password 3.
Getting Started with Y our Polycom® CX700 IP Phone 1 - 9 c Follow the on-screen instructions to register your fingerprint. After completing the PIN or fingerprint registration process, the Contact List screen appears. Usage Guidelines To make a selection on the graphic display, either use your finger or the scroll wheel and the Select key.
User Guide Polycom CX700 IP Phone 1 - 10.
2 - 1 2 Customizing Y our Polycom ® CX700 IP Phone You can customize your Polycom CX700 IP phone by adjusting the setting for time and date, display contrast, and ring type, and other features. You can add contacts to the phone’s directory manually or from call lists.
User Guide Polycom CX700 IP Phone 2 - 2 • The display brightne ss • Your password • Your PIN or fingerprint ID • The user who is currently logged into the phone • The touch screen’s calibration You can also view the current phone network settings.
Customizing Y our Polycom® CX700 IP Phone 2 - 3 2. Select Date/Time Format , then select your preferred format. 3. Press the OK soft key to save your changes or the Cancel soft ke y to exit the Date/Time format screen without making changes. Location and Time Zone You have control over the location and time zone.
User Guide Polycom CX700 IP Phone 2 - 4 Locking and Unlocking Y our Phone After a period of inactivity, your Poly com CX700 phone will lock. You can also lock your phone yourself, for example, if you are leaving your desk. T o lock your phone: 1. Press the Settings s oft key on t he graphic display.
Customizing Y our Polycom® CX700 IP Phone 2 - 5 c Enter a new six digit PIN twice (using the dial pa d), then press the OK soft key. Adjusting the V olume T o adjust the volume on the ringer , handset, and speaker: 1. Press the Settings s oft key on t he graphic display.
User Guide Polycom CX700 IP Phone 2 - 6 2. Select Brightness . 3. Using Up or Down , select your de sired level. 4. Press the OK soft key to save your changes or the Cancel soft ke y to exit the Brightness screen without making changes. Changing Y our Password T o change your password: 1.
Customizing Y our Polycom® CX700 IP Phone 2 - 7 4. Press the OK soft key to save your changes or the Cancel soft key to exit the Change Password screen without making c hanges. Changing Y our PIN T o change your PIN: 1. Press the Settings s oft key on t he graphic display.
User Guide Polycom CX700 IP Phone 2 - 8 Calibration of T ouch Screen T o calibrate the touch screen: 1. Press the Settings s oft key on t he graphic display. 2. Select Calibrate Touch Screen . 3. Follow the on-screen instruct ions to set the calibration.
Customizing Y our Polycom® CX700 IP Phone 2 - 9 T o view the call log: 1. On the left-hand side of the graphic display, select the Call Log soft ke y, . 2. Sort the Call Log screen in one of the following ways: — To view all calls that you have missed, received, or placed, select All, .
User Guide Polycom CX700 IP Phone 2 - 10 Managing Contacts You can view your list of contacts on the graphic di splay. You can view the following information about each contact: • The contact’s pr.
Customizing Y our Polycom® CX700 IP Phone 2 - 11 Searching For a Contact T o search for a par ticular contact: 1. From the contact screen, search for a contact using the dial pad. When a dial pad key is pressed, the en tries whose first name starts with a character that matches the letters on the key label will be r etrieved.
User Guide Polycom CX700 IP Phone 2 - 12.
3 - 1 3 Using the Basic Features of Y our Polycom ® CX700 IP Phone Your Polycom CX700 IP phone is designed to be used like a regular phone. You place calls, transfer a call to some one else, or conduct a conference call. At any time, only one active call may be in progress on your phone.
User Guide Polycom CX 700 IP Phone 3 - 2 If you require additional information or assistance with your new phone, contact your system administrator. Placing a Call You can place a call in many ways using your Polycom CX700 IP phone: • Dial the number using the dial pad with the handset off-hook or on-hook.
Using the Basic Features of Y our Polycom® CX700 IP Phone 3 - 3 T o place a call using the handset: ¾ Do the f ollowing steps in an y order: — Pick up the handset. — Dial the desired number using the dial pad. The number appears in the phone number field.
User Guide Polycom CX 700 IP Phone 3 - 4 Answering Incoming Calls When the incoming call is for the user cur rently logged into the Polycom CX700 IP phone, the caller name an d information will be displayed. T o answer an incoming call when you are not already in a call: ¾ Do one of the following steps: a Pick up the handset.
Using the Basic Features of Y our Polycom® CX700 IP Phone 3 - 5 Ending a Call T o end a call: ¾ Do one of the following steps: — Press the EndCall soft key. — Replace the handset. — Press the Speakerphone key if you are using the speakerphone.
User Guide Polycom CX 700 IP Phone 3 - 6 Putting a Call on Hold During a call, press the Hold soft key. This wi ll be indicated on the graphic display by the hold on the gr aphic display.
Using the Basic Features of Y our Polycom® CX700 IP Phone 3 - 7 2. After the first party answers, press the Conference soft key, then press the Add Someone soft key. 3. Call the second party. T o end a conference call: ¾ Press the EndCall soft key or hang up.
User Guide Polycom CX 700 IP Phone 3 - 8 T o per form a consultative transfer: 1. During a call, press Transfer soft key. The active call is placed on hold. 2. Press the Consult then Transfer To... soft key. 3. Select the contact to which you want to transfer the call.
Using the Basic Features of Y our Polycom® CX700 IP Phone 3 - 9 For warding Calls You can configure your phone so that all incoming calls are forwarded to another party (known as static forwardi ng). You can also forward calls while the phone is ringing (known as dynamic for warding).
User Guide Polycom CX 700 IP Phone 3 - 10 Using V oice Mail Your voice mail is saved in a centra lized location and may be accessed from your phone. The presence of new voice mail messag es is indicated by a Message Waiting Indicator on the graphic dis play.
Using the Basic Features of Y our Polycom® CX700 IP Phone 3 - 11 T o change your presence status information: 1. Click your presence icon in the upper-left hand area of the graphic display. 2. Choose a presence status from the following table: Icon Stat u s T e xt Description Available The contact is online and can participate in conversations.
User Guide Polycom CX 700 IP Phone 3 - 12 3. Press the appropriate soft key. Press the Reset Status soft key to reset to the default, which is based on your Microsoft Office Communicator 2007 statu s. Press the Cancel soft key to exit the Change Presence screen without making changes.
Using the Basic Features of Y our Polycom® CX700 IP Phone 3 - 13 Restar ting Y our Phone On rare occasions, you may need to restart your phone. The reasons for this include: • Accepting a new config uration • Accepting new software T o restar t the phone: ¾ Recycle power to the phone.
User Guide Polycom CX 700 IP Phone 3 - 14.
4 - 1 4 T roubleshooting Y our Polycom ® CX700 IP Phone This chapter presents problems, li kely causes, and corrective actions. Problems are grouped as follows: • Power and Startup • Controls •.
User Guide Polycom CX700 IP Phone 4 - 2 Power and Star tup Symptom Problem Corrective Action There are power issues. The Polycom CX700 IP phone has no power . Do one of the following steps: • V erify that no lights appear on the unit when it is powered up.
T roubleshooting Y our Polycom® CX700 IP Phone 4 - 3 Controls Symptom Problem Corrective Action The dial pad does not work. The dial pad on the Polycom CX700 IP phone does not respond. Do one of the following steps: • Check for a response from other feature keys or from the dial pad.
User Guide Polycom CX700 IP Phone 4 - 4 Access to Screens and Systems Symptom Problem Corrective Action There is no response from key presses. The Polycom CX700 IP phone is not in active state. Do one of the following steps: • Press the keys more slowly .
T roubleshooting Y our Polycom® CX700 IP Phone 4 - 5 I cannot sign-in to the Polycom CX700 IP phone. I see the "U ser name or password is invalid" error . The Polycom CX700 IP phone is not recognized. Do one of the following steps: • Make sure you user name and password is cor rect.
User Guide Polycom CX700 IP Phone 4 - 6 Making and Receiving Calls Symptom Problem Corrective Action There is no dial tone. Power is not correctly applied to the Polycom CX700 IP phone. Do one of the following step s: • Check that the displ ay is illuminated.
T roubleshooting Y our Polycom® CX700 IP Phone 4 - 7 The phone does not ring. Ring setting or volu me is low . Do one of the following steps: • Adjust the ringing level from th e front panel using the volume up/d own keys . • Check same status of handset, headset (if connected) and through the S peake r phone.
User Guide Polycom CX700 IP Phone 4 - 8 Displays Symptom Problem Corrective Action There is no display . The display is incorrect. The display has bad contrast. Power is not correctly applied to the Polycom CX700 IP phone. Do one of the following step s: • Check that the displ ay is illuminated.
T roubleshooting Y our Polycom® CX700 IP Phone 4 - 9 Audio Symptom Problem Corrective Action There is no audio on the Polycom CX700 handset earpiece. Y our Microsoft Off ice Communication Server 2007 account may not be configured correctly . Cont act your sys tem adminis trator to ensure your account is co nfigured in Enterprise V oice mode.
User Guide Polycom CX700 IP Phone 4 - 10.
Safety Notices - 1 Safety Notices Service Agreements Please contact your Polycom Authorized Resell er fo r in formation about service agreements appl icable to your product. Governing Law This Limited Warranty and Limitation of Liability shall be govern ed by the laws of the Sta t e of California, U.
User Guide Polycom CX700 IP Phone Safety Notices - 2 Polycom Limited W arranty and Limitation Liability LIMITED W ARRANTY . Polycom warrants to the end user (“Custo mer”) that this product is ex p.
Safety Notices Safety Notices - 3 Safety and Compliance Usage and Cleaning • Use in accordance with these instructions. • Do not use near any heat sources. • Only use attachme nts/accessor ies specified by Polycom. • Clean only with dry cloth.
User Guide Polycom CX700 IP Phone Safety Notices - 4.
Index – 1 Index A adding contacts 2–10 answering calls 3–3 assembling your phone 1–3 B base adjusting 1–5 C call lists 2–8 types of 2–8 calls ending 3–5 on hold 3–6 with handsets 3.
User Guide Polycom CX700 IP Phone Index – 2 Polycom CX700 adjusting base 1–5 adjusting displa y brightness 2–5 adjusting volume 3–5 answering calls 3–3 assembling 1–3 basic features 3–1 .
Ein wichtiger Punkt beim Kauf des Geräts Polycom CX700 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Polycom CX700 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Polycom CX700 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Polycom CX700 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Polycom CX700 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Polycom CX700 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Polycom CX700 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Polycom CX700. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Polycom CX700 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
