Benutzeranleitung / Produktwartung FDX-0700T des Produzenten Polaroid
Zur Seite of 35
7” Under-the-Cabinet LCD / DVD FDX-0700T Operating Manual 20050121.
- - 2 Table of Contents Table of Contents ----------- ---- -- --- --- --- --- -- --- --- --- --- -- ---- -- --- --- -- Important Safety Instructi on ------------ -------- -------- ---------- ------- F.
- - 3 Important Safety Instructions POWER SUPPLY : Connect the supplied adapter to the side of the DVD player in the slot marked “DC 1 2V IN”. Plug the two-prong end of the power cord to an AC100-240V outlet.
- - 4 Important Safety Instructions Note: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product.
- - 5 FCC Notice Note: This equipment has been tested and found to compl y with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag ainst harmful interference in a residential installation.
- - 6 Characteristic Features This product incorporates a DVD player , LCD display , TV receiver and radio in one system. I t is designed for convenient use in the kitchen.
- 7 - Disc Information Disc Format s Supported By This Play er DISC LOGO DIAMETER PLAYBA CK TIME/ PLAYABLE SIDES 133 min (SS-SL) 242 min (SS-DL ) 266 min (DS-SL ) 12cm 484 min (DS-DL) 41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL) DVD 8cm 150 min (DS-DL) 12cm 74 min CD 8cm 20 min The disc maker specifies the operation of some DVD discs.
- 8 - Front Panel Front Panel Drawing 1. POWER butt on Press to enter or exit the STANDBY mode. 2. PLAY/PAUSE button Press to start or pause playback under DVD mode. 3. Disc Tray Used to load disc. 4. STOP but ton Press to stop playback under DVD mode.
- 9 - Front Panel 11. SEEK –/+ button Under radio mode, press once to fine tune frequency backward or forward. Press for about 1.5 seconds to search radio stations backward or forward automatically. Under DVD mode, press to activate fast backward or forward playback.
- 10 - Rear Panel and display panel Rear Panel Drawing 1. ANT INPUT jack Connected to external antenna to receive the TV program in TV mode. 2. FM 75 Ω coaxial antenna jack 3. AM antenna jack 4. Left/Right AUDIO input jack Connection for audio input.
- 11 - Remote Control Prep aration Refer to the drawing and remove the empty battery receptacle. Insert the battery into the receptacle. Make sure the polarity matches the marks on the remote. Insert the receptacle into the remote. Use Of Remote Control Point the remote control towards the main unit when operating.
- 12 - Remote Control.
- 13 - Remote Control 1. POWER butt on Press to access to or exit the ST ANDBY mode. 2. SUBTITLE button Press to select a subtitle language or to turn subtitles off w hen a DVD with multi- subtitles is playing. 3. DVD button Press to enter DVD mode. 4.
- 14 - Remote Control 19. EJECT button Press to open or close the disc tray. 20. A UDIO button Press to access various audio languages, when the DVD disc contains multiple audio languages. 21. 0-9 number buttons Select numbers by pressing these buttons.
- 15 - System Connections ◆ Do not connect the power cord until all other connections have been made. ◆ Each time you restart the unit, it remembers the last function used.
- 16 - System Connections Connecting T o Antenna Connect the supplied AM/FM antennas to listen to the radio. ◆ In order to improve the signal, move AM loop antenna away from system and other equipment. ◆ Extend FM antenna fully. ◆ Keep the FM antenna as horizont al as possible after connection.
- 17 - System Connections Connecting T o the Po wer Adapter This unit is powered via the switching power adapter (supplied). See the belo w figure for details: 1. Connect the AC adapter to jack marked with “DC 12V IN” on the rear panel of the unit.
- 18 - Radio Function Radio Function Operation Press the AM or FM button on the remote control or front p anel to enter AM or FM radio mode. Then press the SEEK+/- button for about 1. 5 seconds on the remote control or front panel to start searching forward/backw ard fro m the current frequency.
- 19 - TV Function Basic Operation Connect the antenna to the antenna jack on the re ar panel. After connecting the antenna, connect the power supply cord. If the player is in standby mode, press the POWER button on the front panel to turn on t he power.
- 20 - TV Function Use the ▼ 、 ▲ buttons to select the item you want to set. Use the ► , ◄ buttons to select the item and enter it. First use the ▼ 、 ▲ buttons to highlight the TV SETU.
- 21 - TV Function The auto memory will take a few minutes. The unit will search channels fr om the lowest channel to the highest channel in the standard channel list. When tuning operations are complete the unit will exit and store the channels by sequence in the memory.
- 22 - TV Function Power off T o set the playback end time of the signal source, use number buttons to input th e desired time in sequence of hour , minute. Press the ► , ◄ direction buttons to shift between am and pm. When the playback of the signal source is over , the player will enter standby mode.
- 23 - AV Function A V Function The player has an additional AV input so it can function as a moni tor for a DVD pla yer, video cassette player, satellite receiver, video game, etc. When an AV source is connected, press the AV button on the remote control to enter exte rnal input AV mode.
- 24 - Play Operation Preparation 1. Install the unit in the kitchen; refer to page 32 for details. 2. After connecting the unit to the AC power, turn o n the unit’s power by pressing the POWER button on the front panel or the r emote control. 3. Press the DVD button on the remote control or the SOURCE button to shift to DVD mode.
- 25 - Play Operation Subtitle A DVD disc can be recorded with up to 32 subtitles. Press the SUBTITLE button on the remote control during playback to select the one you prefer. NOTE: This function is only available on DV D discs that are recorded with multi- subtitles.
- 26 - Playback Functions Stop During playback, press the STOP button once on the remote control to stop playback of a disc. Press the PLAY button and the DVD Player will resume playback of the disc from the point where it was stopped. Pause Press the PAUSE button once on remote control or front panel to pause playback.
- 27 - Playback Functions Previous and Next Press the PREV button once to return to the currently playing Chapter or Track. Press the PREV button twice repeatedly and playback will start from the previous Chapter or Track. Press the NEXT button on the remote control and playback of the disc will start from the next Chapter or T rack.
- 28 - System Setup DVD Setup You can customize the set up menu to your own preference. Press the “DVD SETUP” button on the remote con trol to display the setup menu. The menu will include “General Setup”, “Speaker Setup”, “Dolby Digital Setup”, “Video Setup”, and “Preference Setup”.
- 29 - System Setup Speaker Setup Downmix Select “LT/RT” in DOWNMIX, the player will output the audio signal IN MIXED NONO. Select “Stereo”, then the player will output a stereo signal. Dolby Digit al Setup Dual Mono The function is used to select from ster eo, left only, right only, and mixed mono.
- 30 - System Setup LCD Setup Under DVD mode, press the TV/LCD SETUP button on the remote control or front panel, there will be menu displayed on the screen. Use the ▼ 、 ▲ buttons to select the item you want to set (Brightness, Contrast, Colo r).
- 31 - Installing the Unit In Kitchen Installing the unit under a cabinet The player unit may be installed in the kitchen with or without the spacer. The suggested mounting position of the unit is under a wall cabinet.
- 32 - Installing the Unit in Kitchen 2. If the cabinet door overhangs the s helf and obstructs the unit, adjust the unit or the shelf height for clearance. 3. Install the unit with the supplied mounting screws. 4. There should be at least 35mm di stance betwee n the unit and the wall.
- 33 - Troubleshooting SYMPTOM CHECK ITEM The player cannot play. Make sure a disc is loaded. Make sure the disc is loaded with label side up. Disc should be clean, not dirty or warped. Player’s re gion code should be the same as the region code of the DVD disc.
- 34 - Specifications LCD screen size 7 inches Laser Wavelength Wavelength: 780/650nm Video System NTSC Frequency Response 20Hz ～ 20kHz ±2.5dB Audio Signal-to-Noise ≥ 85 dB Audio distortion + noise ≤ -70dB (1KHz) Channel Separation ≥ 70dB (1KHz) Dynamic Range ≥ 80dB (1KHz) System PLL AM 520~1710kHz Radio Frequency Range FM 87.
- 35 - For service, support and warranty inform ation, visit www.polaroidelectronics.com or in the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800- 400-2443. “Polaroid” is a registered trademark of Pola roid Corporation of Waltham, MA USA a nd licensed for use on the FDX-0700T to Petters Cons umer Brands, LLC.
Ein wichtiger Punkt beim Kauf des Geräts Polaroid FDX-0700T (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Polaroid FDX-0700T noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Polaroid FDX-0700T - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Polaroid FDX-0700T reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Polaroid FDX-0700T erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Polaroid FDX-0700T besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Polaroid FDX-0700T verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Polaroid FDX-0700T. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Polaroid FDX-0700T gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
