Benutzeranleitung / Produktwartung WNRT-300 des Produzenten Planet
Zur Seite of 75
.
Copyright Copyright 201 1 by PLANET T echnology Corp. All rights reserved. No p art of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated int.
Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure se t forth for an uncontrol led environment.
Italy None If used outside of own premises, gener al authorization is required Luxembourg Non e General authorization required for net work and service supply(not for spectrum) Norway Implemented This.
CONTENTS Chapter 1. Produc t Intro duction ................................................................................................ .......... 1 1.1. Package Contents ............................................................................
V 4.6. Fi rewall .................................................................................................................. ...... 37 4.6.1. Port Filterin g ......................................................................................
User ’s Man ual of WNRT -300 -1- Chapter 1. Product Introduction 1.1. Package Content s The following items should be contained in the package: WNRT-300 Port able AP/Router Power Adapt er USB Cable .
User ’s Man ual of WNRT -300 -2- Built-in High Cap a city Battery The WNRT -300 has one built-in rech argeable lithium battery and it s power supplied through mini USB interface. The power can be directly cha rged vi a the computer's USB port whi ch increases the convenience even when there is n o power outlet available.
User ’s Man ual of WNRT -300 -3- Compliant with IEEE 802.1 1n wireless techno logy capable of up to 150Mbps dat a rate Backward compatible with 802.
User ’s Man ual of WNRT -300 -4- 1.4. Product S pecification Product WNRT -300 150Mbps 802.1 1n W ireless AP / Router Hardware Specification Interface LAN/W AN 1 x 10/100Mbps Auto MDI/MDI-X RJ45 por.
User ’s Man ual of WNRT -300 -5- Wireless Mode AP WDS Repeater (WDS+AP) Universal Repeater (AP+Client) Encryption Security WEP (64/128-bit) encryption security WP A-Enterpris e / WP A2-Enterprise (TKIP/AES) WP A-Personal / WP A2-Personal (T KIP/AES) 802.
User ’s Man ual of WNRT -300 -6- Humidity Operating: 10 ~ 90% (Non-C ondensing) S torage: 5 ~ 90 % (Non-Condensing).
User ’s Man ual of WNRT -300 -7- Chapter 2. Hardware Interface 2.1. Overview Front Panel Figure 2-1 Rear Panel Figure 2-2 Object Description WPS Button Press the button for about 5 secon ds to activate the WPS function. Reset Reset the WNRT-300 to the factory default settings by holding the Reset button and pressing dow n for about 5 second s.
User ’s Man ual of WNRT -300 -8- Figure 2-3 T op Panel LED Definition LED COL OR ST A TE FUNCTION On Device power on Off Device power off Power Green Flash Low batte ry power Flash T he Wireless function is enabled. WLAN Blue Off The Wireless function is disabled.
User ’s Man ual of WNRT -300 -9- Chapter 3. Installation Guide 3.1. System Requirement s Broadband Internet Access Service (Cab le / xDSL / Ethernet connection) One Cable/xDSL Modem that has an RJ-45 co nn ector (not necessary if the WNR T -300 is connected directly to the Ethernet.
User ’s Man ual of WNRT -300 -10- 3.2.2. AP Mode In AP Mode, the NA T (Network Address T ranslation) function and DHCP server are both disabled, and all wireless clients obtain the IP address from t he network device connected with LA N port of the WNRT -300.
User ’s Man ual of WNRT -300 -1 1- 3.3. Manual Network Setup - TCP/IP Configuration The default IP address of the WNRT -300 is 192.168.1.1, and the default Subnet Mask is 255.255.255.0 . These values ca n be changed as you desire in the web UI of the WNRT -300.
User ’s Man ual of WNRT -300 -12- 3) In the prompt window shown bel ow , double click on the Internet Protocol (TCP/IP) . Figure 3-5 4) Choose Obt ain an IP address au tomatically , and Obt ain DNS server automatically as shown in the figure below .
User ’s Man ual of WNRT -300 -13- 3.3.2. Configure the IP address manually If you are sure the DHCP server of WNRT -300 is disabled (the default setting of AP Mode and Client Mode ), you can configure the IP ad dress manua lly . The IP addre ss of your PC should be 192.
User ’s Man ual of WNRT -300 -14- 3.4. Hardware Inst allation Please follow the instruction below to build the wireless network co nnection between WNR T -300 and your computers. Before you st art using the WNR T -300, please follow the procedure s below to install and ch arge the battery .
User ’s Man ual of WNRT -300 -15- Figure 3-4 Step 2. Please turn on the WNRT -300. Figure 3-6 The procedures of hardware installation are finish ed. Please continuously follo w the next section to start setup in the web UI.
User ’s Man ual of WNRT -300 -16- Figure 3-5 3.5. S t arting Setup in Web UI It is easy to configure and mana ge the WNRT -300 vi a web browser . T o access the web UI of the WNRT -300, please open a web browser and e nter the default IP address http://192.
User ’s Man ual of WNRT -300 -17- Figure 3-8 Login Window Default User name: admin Default Password: admin If the above screen does not pop up, it may mean that your web-browser has been set to a proxy .
User ’s Man ual of WNRT -300 -18- Chapter 4. Configuration in Web UI 4.1. Login After successfully logging i nto the web UI of the WNR T -300, you will see the main menus on the lef t side of the web-based utility . There are some differ ent options appear as the o peration mode changes.
User ’s Man ual of WNRT -300 -19- Step 1. The figure below is the screen of the Setup Wizard in Router Mode. Please click the “Next>>” button to continue. Figure 4-2 Step 2. Please select the corresponding W AN connection ty pe of your Internet service, and fill the correct para meters in the blanks.
User ’s Man ual of WNRT -300 -20- AP Mode Step 1. The figure below is the screen of the Setup Wi zard in AP Mode. Please click the “Next>>” button to continue. Figure 4-4 Step 2. Please enter the SSID for recogni zing the wi reless con nection.
User ’s Man ual of WNRT -300 -21- Step 3. Please select the wireless security mod e, and setup the password for wireless connection. Then click the “Finished” button to save the setting s and reboot to take ef fect. Figure 4-6 Client Mode Step 1.
User ’s Man ual of WNRT -300 -22- Figure 4-7 Step 2. Please enter the SSID of the AP you wan t to c onnect with, or you can click the “Sit e Survey” button to search the available local AP . The details of the availabl e AP will appear . Then choose the AP you want to conn ect to, and click the “Next>>” button to continue.
User ’s Man ual of WNRT -300 -23- Figure 4-9 4.3. Operation Mode This page sh ows the current operat ion mode, but u sers can only c hange it by shif ting the hardware switch on the WNR T -300.
User ’s Man ual of WNRT -300 -24- 4.4. Wireless The Wireless menu cont ains submenus of the settings about wi reless network. Please refer to the following sections for the details. Figure 4-1 1 4.4.1. Basic Settings Choose me nu “ Wireless Basic Settings ”, and you can configure the basic settings for the wireless network in this pag e.
User ’s Man ual of WNRT -300 -25- Object Description Disable Wireless LAN Interface Check the box to disable the wireless function. Band Select the desired mode. Default is “ 2.4GHz (B+G+N) ”. It is strongly recommended that you set the Band to “2.
User ’s Man ual of WNRT -300 -26- Broadcast SSID If you enable “Broadcast SSID”, every wireless st ation located within the coverage of the WNR T -300 can discover it s signal easily . If you are building a public wireless network, enabling this feature is recommended.
User ’s Man ual of WNRT -300 -27- Figure 4-13 Wireless Advanced Settings Object Description Fragment Threshold Y ou can specify the maximum si ze of p acket during the fragment ation of data to be transmitted. If you set th is value too low , it will result in bad performance.
User ’s Man ual of WNRT -300 -28- Protection It is recommended to enable the prote ction mechanism. This mechanism can decre ase the rate of data colli sion between 802.1 1b and 802.1 1g wireless st ations. When the protection mode is ena bled, the throughput of the AP will be a little lower due to many of frame traffic sh ould be transmitted.
User ’s Man ual of WNRT -300 -29- 4.4.3. Security Choose menu “ Wireless Security ”, and you can configure the settings of wireless security for the wireless network in this p age. After the config uratio n, please click the “Ap ply Changes” button to save the settings.
User ’s Man ual of WNRT -300 -30- 802.1x Authentication Enable 802.1x authentication function, then please enter the IP Address , Port , and Password of the Radius Server.
User ’s Man ual of WNRT -300 -31- 4.4.5. WDS Settings Wireless Distribution System (WDS) uses wireless media to communi cate with other APs, like the Ethernet does. T o do this, you must set these APs i n the same channel and set MAC a ddress of other APs which you want to communicate with in the t able and then enable the WDS.
User ’s Man ual of WNRT -300 -32- Current WDS AP List Y ou can select some MAC address of the AP , and click the “Delete Selected” button to delete it. 4.4.6. Site Survey Choose menu “ Wireless Site Survey ” to scan the available local AP .
User ’s Man ual of WNRT -300 -33- 4.4.7. WPS Choose menu “ Wireless WPS ”, and you can configure the setting for WPS (Wi-Fi Protected Setup).
User ’s Man ual of WNRT -300 -34- Figure 4-19 Wireless S c hedule 4.5. TCP/IP Settings The TCP/IP Settings men u contains su bmenus of the settings about LAN an d W AN.
User ’s Man ual of WNRT -300 -35- Figure 4-21 LAN Interface Object Description IP Addres s The LAN IP address of the WNR T -300, and default is 192.168.1.1 . Y ou can change it accordi ng to your request. Subnet Mask Default is 255.255.255.0 . Y ou can change it according to your request.
User ’s Man ual of WNRT -300 -36- 4.5.2. WAN Interface Choose menu “ TCP/IP Settings WA N I n t e r f a c e ”, and you can configu re the parameters for the Internet network. After the configuratio n, please cl ick the “Apply Changes” button to save the settings.
User ’s Man ual of WNRT -300 -37- Enable Ping Access on W AN Check the box to enable Ping access from the Interne t Network. Enable Web Serv er Access on W AN Check the box to enable the web server access of the WNRT -300 from the Internet network.
User ’s Man ual of WNRT -300 -38- 4.6.1. Port Filtering Choose menu “ Firewall Port Filtering ”, and you can configure which port range and protocol to be restricted. After the configuration, please click the “Apply Chan ge s” button to save the settings.
User ’s Man ual of WNRT -300 -39- 4.6.2. IP Filtering Choose menu “ Firewall IP Filtering ”, and you can configure which IP address and protocol to be restricted. After the configuration, please click the “Apply Chan ge s” button to save the settings.
User ’s Man ual of WNRT -300 -40- Figure 4-26 MAC Filtering Object Description Enable MAC Filtering Enable MAC filtering MAC Address Add MAC address you want to control Comment The description of this setting Check the “Select” box of which rule you want to delete, and then click the “Delete Selected” button to delete it.
User ’s Man ual of WNRT -300 -41- Figure 4-27 Port Forwarding Object Description Enable Port Forwarding Enable Port Forwarding function IP Addres s Add LAN IP address of specified host or server on the private local network Protocol Select the port number protocol type (TCP , UDP or both).
User ’s Man ual of WNRT -300 -42- 4.6.5. URL Filtering Choose menu “ Firewall URL Filtering ”, and you can configure which UR L addresses to be blocke d. After the configuratio n, please click the “Apply Changes” button to save the settings.
User ’s Man ual of WNRT -300 -43- Figure 4-29 DMZ Object Description Enable DMZ Check the box to enable DMZ function. If the DMZ Ho st Function is enabled, it means that you set up DMZ host at a parti cular computer to be exposed to the Internet so t hat some applications/software, especially Internet / online game can have two way conne ctions.
User ’s Man ual of WNRT -300 -44- Choose menu “ Firewall VLAN ”, and you can configure the settings of virtual LAN. VLAN refers to a group of logically networked devices on one or more LANs, so that they can communicate with each other as if they were attached to the sa me wire.
User ’s Man ual of WNRT -300 -45- 4.7. QoS The QoS (Quality of Service) func tion will improve the netwo rk performance of th e specified comput er by ensuring that it s network traf fic is prioritized ov er others’. After the configu ration, please click the “Apply Changes” button to save the settings.
User ’s Man ual of WNRT -300 -46- Automatic Downlink Speed Check the box to adjust the downl ink speed automatically by the WNRT -300. Or enter the downlink dat a rate manually in the field below . QoS Rule Setting T o set the priority rule, y ou can appoint the computer by IP address or MAC address, and enter it in the correct field.
User ’s Man ual of WNRT -300 -47- 4.9. Management The Management menu cont ains submenus of the gener al settings of the WNR T -300. Please refer to the following sections for the det ails. Figure 4-33 4.9.1. Status Choose menu “ Management Sta tu s ” to show the current st atus and som e basic settings of the WNRT -300.
User ’s Man ual of WNRT -300 -48- 4.9.2. Statistics Choose menu “ Management St atistics ” to show the p acket counters for transmission an d reception regarding to wireless and Ethe rnet network.
User ’s Man ual of WNRT -300 -49- 4.9.3. DDNS Choose menu “ Management DDNS ” to configure the settings about Dynamic DNS. Dynamic DNS is a kind of service that provides users with a valid, u nchanging internet domain name (an URL) to go with that (possibly ever changing) IP address.
User ’s Man ual of WNRT -300 -50- 4.9.4. Time Zone Setting Choose menu “ Management Time Zone Setting ” to configure the sy stem time. Y ou can also maintain the system time by synchro nizing with a public time server over the Internet. Af ter the configuration, please click the “Apply Ch anges” button to save the settings.
User ’s Man ual of WNRT -300 -51- Figure 4-38 Denial of Service Object Description Enable DoS Prevention Check to enable DoS function. User ma y set other rel ated configurations about DoS below 4.9.6. Log Choose menu “ Management Log ” to configure the settings of system log.
User ’s Man ual of WNRT -300 -52- the items you want to record it in the log. Afte r the configuration, pleas e click the “Apply Changes” button to save the settings. Figure 4-39 System Log Object Description Enable Log Check to enable log function.
User ’s Man ual of WNRT -300 -53- Figure 4-40 Upgrade Firmware Object Description Select File Browse and select file you want to upgrade and press Upload to perform upgrade. Please wait till on screen sho ws related information after upgrade finished.
User ’s Man ual of WNRT -300 -54- Reset Settings to Default Click the “Reset” button to reset all settings of the WNRT -300 to factory default. 4.9.9. Passw ord Choose menu “ Management Password ” to change the user name and p assword which is inputted to access the web UI of the WNRT -300.
User ’s Man ual of WNRT -300 -55- Chapter 5. Quick Connection to a Wireless Network 5.1. Windows XP (Wireless Zero Configuration) Ste p 1 : Right-Click on the wireless network icon displayed in the .
User ’s Man ual of WNRT -300 -56- Ste p 4 : Enter the encryption key of the Wireless Ro uter (1) The Wireless Network Connection box will appear (2) Enter the encryption key that configured in section 4.
User ’s Man ual of WNRT -300 -57- Some laptops are equi pped with an “Wi-Fi ON/OFF” hardware switch for the internal wireless LAN. Make sure t he it is switched to “ON” position. 5.2. Windows 7 (WLAN AutoConfig) WLAN AutoConfig service is built-in in Windows 7 and can be used to detect and connect to wireless network.
User ’s Man ual of WNRT -300 -58- Figure 5-7 If you want to connect to this Wireless Rout er in the future, please check the box of [ Connect automatically ]. Ste p 3 : Enter the encryption key of the Wireless Ro uter (1) The [Connect to a Network] box will appear (2) Enter the encryption key that configured in section 4.
User ’s Man ual of WNRT -300 -59- Figure 5-8 Figure 5-9 Ste p 4 : Check if “ Connected ” is displayed Figure 5-10.
User ’s Man ual of WNRT -300 -60- 5.3. Mac OS X Ste p 1 : Right-Click on the network icon displayed in the system tray The AirPort Network C onnection menu will appear Figure 5-1 1 Ste p 2 : Highlig.
User ’s Man ual of WNRT -300 -61- Figure 5-13 If you want to connect to this Wireless Router in the future, please che ck [ Remember this network ]. Ste p 4 : Check if the AirPort is connec t to the selected wireless network. If “Y es”, then there will be a “check” symbol in front of the SSID.
User ’s Man ual of WNRT -300 -62- There is another way to configure the MAC OS X Wireless settings: Ste p 1 : Click and open the [ System Preferences ] by going to Apple > System Preference or Ap.
User ’s Man ual of WNRT -300 -63- Ste p 3 : Check Wi-Fi setting and select the available wirel ess network (1) Choose the AirPort on the left-menu (make sure it is ON) (2) Select Network Name [default] here If this is the first time to connect to the Wireless Router , it should shows “Not network selected”.
User ’s Man ual of WNRT -300 -64- 5.4. iPhone / iPod T ouch / iPad Ste p 1 : T ap the [ Settings ] icon di splayed in the home screen Figure 5-17 Ste p 2 : Check Wi-Fi setting and select the availab.
User ’s Man ual of WNRT -300 -65- Figure 5-19 Ste p 3 : T ap the target wire less network (SSID) in “ Choose a Network… ” (1) Turn on Wi-Fi by tapping “ Wi-Fi ” (2) Selec t SSID [ default .
User ’s Man ual of WNRT -300 -66- Figure 5-21 Ste p 5 : Check if the iDevice is connected to the selected wireless n etwork. If “Y es”, then there will be a “check” symbol in front of the SSID.
User ’s Man ual of WNRT -300 -67- Appendix Malfunction Solution The WNRT -300 is not responding to me when I want to access it via web browser Please check the connecti on of power cord and network cable of the WNRT -300. All cords and cables sho uld be correctly and firmly inserted to the device.
User ’s Man ual of WNRT -300 -68- h. Try to use IP address instead of hostname. If you can access a remote serve r by an IP address but not by a hostname, please check the DNS setting. Unable to be found by the wirele ss clie nts a. Che ck if the “Broadcast SSID” is disabl ed.
EC Declaration of Conformity For the following equipment: *T ype of Product: 150Mbps 802.1 1n W ireless Portable AP / Router *Model Number: WNR T -300 * Produced by: Manufacturer‘s Name : Planet T echno logy Corp. Manufacturer‘s Address: 10F ., No.
Ein wichtiger Punkt beim Kauf des Geräts Planet WNRT-300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planet WNRT-300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planet WNRT-300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planet WNRT-300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planet WNRT-300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planet WNRT-300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planet WNRT-300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planet WNRT-300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planet WNRT-300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
