Benutzeranleitung / Produktwartung WAP-1966 des Produzenten Planet Technology
Zur Seite of 57
22Mbps Wir e les s Access Poin t / Bridge W A P-1966 User ’ s Manual.
Co p y right Copyright 2003 by PLANE T T echnology Corp . A ll righ t s r eserved . No par t of t his publication ma y be reproduced, t r ansmit t ed, t r anscribed, s t ored in a ret r ieval syst.
Federal Communication Commission (FCC) Radiation Exposu r e Statement This equipment complies w ith FCC radia t ion e x posure set f orth for an uncontrolled envi r onment.
T A BLE OF CONTENTS C H A P T ER 1 IN T RODUC T I O N ................................................................................................. .1 1.1 P ACKAGE C ON T ENTS .......................................................................
C H A P T ER 6 T ROUBLES H OO T IN G ...................................................................................... . 51.
- 1 - Chapter 1 I ntroduction Thank you for purchasing W AP-1966. This device features the latest innovation w ireless technolog y making the w ireless net w orking w orld happened . This manual guides you on ho w to ins t all and properl y use t he W A P-1966 in o r der t o t ake full advan t age of i t s fea t u r es.
- 2 - Point-to- M ul t iPoint) • Provi d e W indo w s-bas e d c o n f iguration utili t y an d W eb Con f igur a ti o n 1.4 Speci f ica t ion S t andard IEEE 802.
- 3 - Chapter 2 H ard w a re Installation Before you p r oceed w ith the ins t allation, it is necessary that you have enough info r ma t ion about the W A P-1966 .
- 4 - Chapter 3 C onf i guring the Wire l ess A c ce s s Po i nt 3.1 Configur e t h rough Web Br o w s er W eb configura t ion provides a user-f r iendly graphical user in t erface ( w eb pages ) to manage you r W A P-1966 . An AP w ith an assigned I P address (e .
- 5 - The default pass w ord for administrator (login name is “ admin ” ) is “ admin ” . Y ou can change the Pass w ord in this step . Click “ N e x t> ” . Step 2. Set the SSID and Channel Enter the SSID of your W LAN and select t he f r equency channel.
- 6 - Please click the “ Res t art ” but t on to save the set t ings and r es t art W A P - 1966. In t he follo w ing w e b page , please click “ Close ” to close t he Setup W i z ard w indo w . 3.1.2 S t atus: Y ou can check your W A P - 1966 se t tings and s t a t us in this screen .
- 7 - 3.1.3 Basic Settings: Y ou can set t he A P Name , ESSID, Channel and W E P function to this Access P oint. A f te r con f iguration, please click A pply to save you r settings. AP Name : The host name of the W A P-1966. This can be any name f or you to easily identify this access point.
- 8 - I P address : This address is a unique numbe r s that identi f ies a computer or device on the WAN o r LAN. These numbe r s a r e usually sho w n in grou p s sepa r ated by periods, for e x ample: 123.
- 9 - AP Mode: WAP-1966 has f ou r opera t ion modes. By default, it is set to A P mode . A P: This mode is set t o WA P -1966 by default . This connec t s your w ireless PCs t o a w ired net w ork. In most cases, no change is necessar y . Up to 63 w ireless clien t s can be connected through W A P-1966 .
- 10 - and 2432 . This value should remain at i t s default setting of 2 , 432. Should you encounter inconsisten t da t a f lo w , only minor modifica t ions are recommended. Fragmen t ation Threshold: This field is used to specify the fragmen t ation threshold .
- 11 - Password : Enter the ne w pass w ord in the " AP Pass w ord Ne w " field and again in the ne x t field to con f irm . Click on " A pply" to execu t e t he pass w ord change . The Pass w ord is case - sensi t ive, and can be made up o f any keyboa r d characte r s.
- 12 - Enable/D i sable: Enable or disable 802 . 1 X authentication of W A P-1966. Encr y ption K e y: Select one of the Encryp t ion key leng t h options. I t should be set t he same leng t h as W EP ke y . Select one of the Encryp t ion key li f etime options.
- 13 - devices on a net w ork. It is commonly used f or net w ork administrato r s to communica t e w ith mul t iple devices (hub, s w itch, rou t er …… ) for configuring and moni t oring w hile convenien t fo r troubleshoo t ing bu t no miscellaneous pla t form conside r ation.
- 14 - 4. Please click “ Finish ” t o complete the so f t w are ins t allation . 3.2.2 22M A P Utili t y c onfiguration A f ter ins t alling utilit y , you can f ound the icon on your desktop, please double click this icon to run t he configura t ion u t ilit y and select each option to se t up you r Access Point as you need .
- 15 - 3.2. 2 .1 Link Information W hen the configuration utility s t ar t s, it w ill sho w you the fi r s t option “ Link Information ” . Y ou can view the fi r st A ccess Point ’ s curren t set t ing . Note: If you have many WAP - 1966, all the WAP - 1966s w ill list in “ A vailable AP ” .
- 16 - Basic Sett i ngs : ESSID : ESSID is used by all w ireless devices w ithin the w ireless net w ork . The ESSID value mus t be the same on all s t ations and A ccess poin t s in this W LAN. Channel : Select the appropriate channel f r om the list provided to cor r espond w ith your ne tw or k settings, bet w een 1 and 13 (in ETSI).
- 17 - T ransm i ssion Ra t es: Y ou may select transmission rate t o “ 1-2 M bps ” , “ 1-2-5 . 5- 1 1 M bps ” or “ 1-2-5.5- 1 1-22 M bps ” . Preamble T y p e: The preamble defines the length of t he CRC block f or communication bet w een the Access Point and roaming Net w ork C ard.
- 18 - A ntenna T ransmi t power : Used to control the transmit po w er of the WAP-1966. Four options are available: 100%, 50%, 25% and 12.5% . 3.2. 2 .3 I P Settings DHCP : DHC P is a p r otocol for dynamically assigning I P addresses to net w orked compu t ers.
- 19 - 3.2. 2 .4 WEP Settings Da t a Encr y ption : Select this option w hen you w ant to enable W EP f unction. A uth. Mode : Open A uthentication: W i t h t his set t ing , any s t ation in the W LAN can receives and transmi t s da t a f r om the A ccess Point (null authentication).
- 20 - 3.2. 2 .5 8 02 . 1x Settings 802.1X Funct i on: Enable or disable 802.1 X authentica t ion o f WAP-1966. Encr y ption K e y: Select one of the Encryp t ion key leng t h options. I t should be set t he same leng t h as W EP ke y . Select one of the Encryp t ion key li f etime options.
- 21 - Chapter 4 8 0 2. 1 X A uthenticat i on Setup 4.1 8 02. 1 X Infra s tructure An 802.1 X Infrastructu r e is composed o f three majo r componen t s: Authenticato r , Au t hen t ication serve r , and Supplicant. A uthentication server: An entity tha t provides an authentication service to an authenticator .
- 22 - 5. The RADIUS server r esponds to the clien t w ith i t s digi t al certifica t e. 6. The client validates the digi t al cer t ificate, and replies i t s o w n digi t al cer t ifica t e to t he R A DIUS serve r . 7. The RADIUS server valida t es client ’ s digi t al cer t ificate.
- 23 - 6. Enter the info r ma t ion tha t you w ant for your Ce r tifica t e Service, and click “ Next ” to continue . 7. Go to S t art > Program > A dministra t ive Tools > Certif i cate A uthori t y . 8. Right-click on the “ Poli c y S etting ” , select “ new ” .
- 24 - 11. Go to Start > Program > A dministrative Tools > A ctive Director y Users and Computers . 12. Right-click on domain, and select ” Properties ” to con t inue. 13. Selec t “ Group Pol i cy ” tab and click “ Properties ” to con t inue .
- 25 - 14. Go to “ Compu t er Configuration ” > “ Securi t y Settings ” > “ Public K e y Policies ” 15. Right-click “ A utomatic Certificate Request S etting ” , and select “ New ” 16. Click “ A utomatic Certif i cate Request .
- 26 - 17. The Au t oma t ic C erti f icate Request Setup W iza r d w ill guide you th r ough the Automa t ic Certi f icate Request setup , simply click “ Next ” th r ough to t he last step. 18. Click “ Fin i sh ” to complete the Au t omatic Certi f icate Request Setup 19.
- 27 - Setting In t ernet Authenticat i on Service 24. Go to Start > Program > A dministrative Tools > Inte r net A uthentication Service . 25.
- 28 - 27. Click “ F i nish ” . 28. In the Inte r net Authentication Service, right - click “ R emo t e A ccess Pol i cies ” 29. Selec t “ New Remote A ccess Pol i cy ” . 30. Selec t “ D a y - A nd-Time-Restriction ” , and click “ A dd ” to continue .
- 29 - 31. Unless you w ant to specif y the active dura t ion for 802.1 X authentication, click “ OK ” to accept for having 802.1 x authentication enabled a t all times. 32. Selec t “ Grant remo t e access pe r miss i on ” , and click “ Next ” to continue.
- 30 - 33. C lic k “ Edit Profile ” . For TLS Authenticat i on Setup (Steps 34 ~ 35 ) 34. Selec t “ A uthentication ” Tab. 35. Enable “ Extensible A uthentication Protocol ” , and select “ Smart C ard or other Cert i ficate ” f or TLS au t hen t ication.
- 31 - For M D5 Authentication S e t up (Steps 36 ~ 37 ) 36. Selec t “ A uthentication ” Tab. 37. Enable “ Extensible A uthentication Protocol ” . Select “ MD5-Challenge ” and enable “ E ncr y pted A uthentication (CH A P) ” for MD5 authentication.
- 32 - 38. Selec t “ Internet A uthentication Service (Local) ” , click on “ Action ” f r om t op panel. Then click “ Register Service i n A ctive Directory ” . 39. Go to Start > Program > A dministrative Tools > A ctive Director y Users and Computers.
- 33 - 42. Go to “ Computer Conf i guration ” > “ Windows S ettings ” > “ Securi t y Settings ” > “ A ccount Policies ” > “ Password Pol i c i es ” . D ouble click on “ S t ore password us i ng reversib l e enc r y ption for all users in the domain ” .
- 34 - 43. Click “ Define this poli c y s etting ” , select “ E nab l ed ” , and click “ OK ” to continue . 44. Go to Start > Program > A dministrative Tools > A ctive Director y Users and Computers . 45. Go to Users . R ight - click on the use r tha t you are granting access, and selec t “ Propert i es ” .
- 35 - 48. Go to the “ Dial-in ” tab , and check “ A llo w access ” op t ion for Remote Access Pe r mission and “ No Call-back ” for Callback Options.
- 36 - 4.3 A uthenticator Setup 1. For E A P-MD5 Au t hen t ication, W E P key must be set previously. Go t o Bas i c Sett i ngs. Enable W E P key, and en t er a desired key s t ring. Y ou can skip this step if using E A P-TLS Authen t ication . 2. Click on 802.
- 37 - by RADIUS server. 5. Enter the IP address, Port number, and Shared Secret K e y used by the Primar y Rad i us Server . 6. En t er the IP address, Por t number, and S hared Secre t K e y used by the Secondar y Radius Server. 7. Click “ A pp ly ” .
- 38 - 5. Click “ Properties ” of one a v ailable w ireless net w ork, w hich you w ant to associate w ith . 6. Select “ Da t a encr y ption (WEP enabled ) ” option, but leave othe r op t ions unselected .
- 39 - 7. Enter the net w ork key in “ N e t w ork k ey ” t e x t bo x . The string must be t he same as the fi r st set o f W E P key w hich you set t o W A P-1966. 8. Click “ OK ” . 9. Select “ A uthentication ” tab. 10. Selec t “ Enab l e ne t work access contro l using IEEE 802.
- 40 - 13. W hen w ireless client has associated w ith W A P - 19665, a user authentica t ion notice appears in system tray. Click on t he notice to con t inue. 14. En t er the user name , pass w ord and the logon domain t hat your account belongs. 15.
- 41 - dialog bo x w ill prompt you t o enter user name and pass w ord . 2. Enter a valid user name and password , then click “ OK ” t o continue . 3. Select “ Reques t a certificate ” , and click “ Next ” to con t inue. 4. Select “ User Certificate request ” , and click “ Next ” t o continue.
- 42 - 5. Click “ Submit > ” to con t inue. 6. The Certi f icate Service is no w processing the cer t ificate request..
- 43 - 7. The cer t ifica t e is issued by t he server, click “ Install t his certificate ” t o do w nload and sto r e the certi f icate t o your local compu t er. 8. Click “ Y es ” to s t ore the certifica t e to your local computer . 9. Certi f icate is no w installed.
- 44 - 2. Right-click on the W ireless Net w ork Connection w hich using W L - 3555. 3. Click “ Properties ” to open up the P r oper t ies setting w indo w . 4. Click on the “ Wireless Ne t work ” t ab. 5. Click “ Properties ” of one a v ailable w ireless net w ork, w hich you w ant to associate w ith .
- 45 - 6. Select “ The k e y is provided for me automatica l ly ” option. 7. Click “ OK ” . 8. Click “ A uthentication ” tab 9. Select “ Enable ne t work access control using IEEE 802 . 1X ” op t ion t o enable 802.1 x authen t ica t ion.
- 46 - 10. Selec t “ Smart Card or other Certificate ” from the drop-do w n list bo x for EAP type. 11. Click “ OK ” . 12. W hen w ireless client has associated w ith W A P - 1966, W i ndo w s X P w ill prompt you to select a certi f icate f or w ireless net w ork connec t ion.
- 47 - 14. M ake su r e this cer t ificate is issued by correct server, and click “ OK ” to complete the au t hentica t ion process..
- 48 - Chapter 5 A ppl i cation This chapter describe the four opera t ing mode of your W A P-1966 . The four w orking modes of W A P-1966 are Access P oint , Access Point Client M ode, W ireless Bridge mode and M ultiple B r idge mode. 5.1 A ccess Point mode W i t h t his mode, you r W ireless net w ork connection could act as follo w ing.
- 49 - 5.3 W ireles s Bridge mode The W i r eless Bridge mode help to make the t w o Ethernet ne tw orks connected w ithout any w ire. W i t h t w o W A P-1966s in this mode, the tw o LANs in dis t ance can communica t e to each o t he r . This could be deployed if the net w orks are hard to make t he w ire in bet w een.
- 50 - transmission rate t o communicate w ith each othe r . In a la r ge net w ork, please consider using management device to r educe the net w ork broadcast to the w ireless net w ork. 5.5 Repeat e r mode W hen W A P-1966 w orks in repeater mode, i t w ill repeat the w ireless signal from A P to w ireless client or from w ireless client to A P .
Chapter 6 Troubleshooting This chapter gives ti p s on ho w to configure the communication so f t w are. This chapter p r ovides solutions to problems usually encounte r ed du r ing the ins t allation and operation of the Wireless Network Access Point .
- 52 - An integra t ed w ireless and w ired LAN is called an Infrast r uc t ure configura t ion . Inf r astructu r e is applicable to enterp r ise scale f or w ireless access to cent r al da t abase, or w ireless application for mobile w orke r s.
Ein wichtiger Punkt beim Kauf des Geräts Planet Technology WAP-1966 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planet Technology WAP-1966 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planet Technology WAP-1966 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planet Technology WAP-1966 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planet Technology WAP-1966 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planet Technology WAP-1966 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planet Technology WAP-1966 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planet Technology WAP-1966. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planet Technology WAP-1966 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
