Benutzeranleitung / Produktwartung VIP-280 des Produzenten Planet Technology
Zur Seite of 43
H.323/SIP VoIP Router VIP-280 User’s manual 1.
Copyright Copyright (C) 2005 PLANET T echnology Corp. All rights reserved. The products and programs described in this User ’s Manu al are licensed products of PLANET T echnology , This User ’s Ma.
3 Revision User ’s Manual for PLANET H.323/SIP V oIP Router: Model: VIP-280 Rev: 1.0 (Sept. 2005) Part No. EM-VIP280V1.
4 T ABLE OF CONTENTS Chapter 1 Introduction .......................................................................... 6 Overview .........................................................................................................................
5 S tatic Routing ........................................................................................................... 33 V irtual Server ..........................................................................................................
1 Chapter 1 Introduction Overview With years of Internet telephony and router ma nuf acturing experie nce, PLANET proudly introduces the latest member of the PLANET VoIP gateway family: the VIP-280.
• Voice processing: Voice Active Detection, DT MF detection/ generat ion, G.168 echo cancellation (16mSec.), Comfort noise generation, Call prog re ss detection, Gain Control Package Content The contents of your product should con t ain the following items: H.
LED Display & Button LED Indicators Descriptions PWR Power is supplied to the V oIP router SYS System LED will be ON when the regist ration toward the GK/SIP proxy is successful W AN Oran ge: the V oIP router is connected to W AN at 10Mb/s. Green: the V o IP router i s connected to W A N at 10 0Mb/s.
2 Chapter 2 Prep arations & Inst allation Physical Inst allation Requirement This chapter illustrates ba sic installation of VIP-280 • Network cables. Use standard 10/1 00Ba seT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs.
Please locate your PC in the same network segment (192.168.0.x) of VIP-280. If you’re not familiar with TCP/IP, please refer to related chapter on user’s manual CD or consult your network administrator for proper network configurations.
Default : 192.168.0.1 L Hint It is suggested to keep the DHCP server related parameters in default state to keep machine in best performance. After confirmi ng the modifi cation you’ve done, Please click on the Modify button to make the chang es effective.
after you modify the p arameters. 12.
3 Chapter 3 Network Service Configurations Configuring and monitoring yo ur VIP-280 from web browser The VIP-280 integrates a web-based graphical user in terface that can cove r most configurations and machine st atus monitoring. V ia standard, web bro wse r , you can configure a nd check machine statu s from anywhere around the world.
VIP-280 main page 14.
Chapter 4 V oIP Configurations VIP-280 S t atus This page ma in display the current and last time V o IP call st atus & result. Parameter Description PC Time will show the date & time t hat your connected PC now . Gateway Time will show the date & time of this V o IP router , the date amd time is get from SNTP server .
Register Sever St atus This V oIP router can regi ster to 4 GK/SIP proxy simult aneo usly . Users can setup the GK/SIP proxy information on “ V oIP Config Register Server ” Error Message For some reason (ex. All lines of th is V o IP router are busy), here will display the failure information of last time V oIP Call in.
Hotline When Enable, it will allow you to make a V oIP call without Key in any number . Th at mean it will direct call out by V oIP when you of f hook the phone of this line. Tone Setting This page defines the ton e s generated to the phone connected to the phone port.
VoIP Call Out This page defines the routi ng rule for Call out to V oIP . (User key in the phone number through phone set dial pad, then V oIP router translate th e phon e number by the routing table se tting here to destination IP , and dial out number t hen call out via network protocol).
19 matched with the rule will call out by this rule define. Please Notify there is a compare orde r rule on this routing ta ble. That mean the V oIP router will check the rule list from top to bottom one by one, any rule item matched with the prefix digits that us er key in will go to call out directly no regard to the rest rules belo w .
002886222199518. Another example, if user key in the number is 90, STRIP field is setting to 2, and the PREFIX field is setting to 0,22199518, the actually call out number will be 0,22199518 ( “ , “ mean wait 1 second ). This example is especi ally for spe ed dial function.
21 line and number to dial out. Parameter Description Area Code Define the Prefix number this rule service, any V oIP called from network dialed number prefix digit s matched with the rule will call out to phone by this rule define. Please Notify there is a comp a re order rule on this routing table.
22 call will ring the dedicate phone line that assigned with matched nu mber . Server Assign which server to authorize this in co ming V oIP cal l before call out. For example, if the dial number shou ld be checke d by server 1 setting on the “ Regster Server ” menu (Please refer to the “ V oIP Config Registe r Sever ”).
Please remember to press the modify button to t ake it ef fect. For store back to flash memory , please press “ Save Modification ” (Plaase refer to the “ Syetem Maintenance Save Modification ”). Call Setup This page defines the o ptional special V oIP parameters when making/received a V oIP call.
T .38 F AX Relay ON: F AX will be transmitted by using T .38 F AX over IP protocol. OFF: F AX over IP is disable. Package Frame Select the voice payload frame on each UDP packa ge V oIP transmit. More frames into one package is save more bandwidth. The default frames on each packa ge is 3.
Line busy No answer Please add a profile at “ V oIP Config Call Routing Call Setup ” and put the name of profile on the Call out Routing table (Pl ease refer to the “ V oIP Config Call Routing /V oIP Call Out ”).
26 Register Server If this V oIP router wa nt to use GK /SIP proxy service to transfer the V o IP call, you can input the GK /SIP information here. The V oIP router can register to up to four GK/SIP proxy simult aneously . Parameter Description Register Server St atus Success: Register su ccessful.
When voice communication is established via H.323 protocol , please add a ”h323:” in front of the IP address. Such as: the GK IP address is 192.168.0.100, then input “h323:192.168.0.100” in the IP address. When voice communication via the SIP protocol , please add a “sip:” in front of the IP address/URL.
28 Parameter Description Gateway IP Show the IP of this V oIP router Name Select the name you want to make connect, this is defined on W eb Call page. (Please refer to the “ Vo I P C o n f i g Web Call Setting Web call ). Call Press to make a call.
name, please rename your logo gra phi c file(.bmp, .jpg , .gif) to “Welco me” before upload. There is a f ile size limit ation. Please press the Browse button to select the “W elcome” file you want to upload and press Upload to Upload it. Delete Delete this rule item on routing table.
5 Chapter 5 System Configurations System Config Bridge Mode Setting This page allows you to disabl e/enable this devic e become bridge device o r not. When it be co mes a bridge device, bridge interface u se LA N's IP addre s s, LAN' s subnet mask.
Basic Settings: Y ou can configure basi c firewall setti ngs in this router . LAN-to-W AN Access Rules: Y ou can define LAN-to-W AN network access rules which evaluat e the network traf fic' s source IP addres s, destination IP address, and communi cation port to decide if it's allowed to pass throug h the firewall.
32 The ability to define network access rules is a very powerful management tool. Using a custom rule, it's possible to disable all firewall protection, creating holes in the firewall, or block all access to the Internet. Use with extreme caution when creating or deleting network access rules.
33 When any change is made on this page, you MUST res tart all PCs to update their TCP/IP settings from this DHCP server. Adding incorrect routing information can affect the connection, a local host, or the whole private network. You must have experience working with routing tables before using this option.
Virtual Server This page allows you to map a TCP o r a UDP port of the router to a host which actually deals with request s on t he private network. DMZ This page let you set up th e DMZ service on the V oIP router .
System Maintenance This page let you backu p / Restore all of your config uration param eters on the V oIP router . It is very good idea to back up all of your V oIP router configuration p arameters after inst all. Configurations T o Backup, press Download setting ba ckup file, and i nput the file name you want and file location to save.
Reboot System Use the Reboot button on this p age to re boot your V oIP router , before you reboot, please ma ke sure you have to press the “ Saved modification ” to save your current configuration to Flash ROM, otherwise all the change will be disappe ar after reboot.
37 Appendix A V oice communications There are several ways to make call s to desired de stination in VIP-280. In this chapter , we’ll l ead you step by step to esta blish your first voice comm uni cation via web browsers operations. A Default Configuration Without any configuration, y our VIP-280 is come with following ba sic information.
Supposing you have one VIP-280 conn e cts to four telephones, just pick up pho ne 1 and dial ‘202’, phone 2 should rings. 202 VIP-280 local port #2 ))) Line number: 202 Line number: 201 Peer-to-Peer (P2P) mode 38 VIP-280 WAN IP Address: 172.
STEP 2: Select V oIP Call Out in the Call Routing menu; insert the values of the index number , Area Code and IP Address on the V oIP call out routing tabl e for outgoing calls. Th e sample configuration screen is shown below . When the calling party is an H.
V oice communication via SIP proxy server –SIP50 Registration / Authentication Registration / 40 Machine configurations on the VIP-280: STEP 1: Please log in machine via web browser , and select Register Server setting in the Vo I P Config menu.
STEP 2: Select Line Setting in the Line config menu. In this Line Setting p age, plea se insert the telephone number assigne d to this line , and then the sample configuration screen is shown below (in this sample, we’r e using number 280 for incoming calls).
42 STEP 5: Repeat the same configuration step s on the VIP-320, and check the machine registration status, make sure the registrations a re completed. ========== ========== =========== ========== ====.
43 Appendix B VIP-280 S pecifications Product H.323/ SIP VoIP Router Model VIP-280 Hardware WAN 1 x 10/100Mbps RJ-45 port LAN 4 x 10/100Mbps RJ-45 port FXS 2 x RJ-11 connection Standards and protocol Standard H.323 version v2/v3,H.323 Fast star t, and H.
Ein wichtiger Punkt beim Kauf des Geräts Planet Technology VIP-280 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planet Technology VIP-280 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planet Technology VIP-280 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planet Technology VIP-280 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planet Technology VIP-280 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planet Technology VIP-280 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planet Technology VIP-280 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planet Technology VIP-280. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planet Technology VIP-280 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
