Benutzeranleitung / Produktwartung ADW-4300B des Produzenten Planet
Zur Seite of 87
802.11g Wireless ADSL Firewall Router ADW-4300A / ADW-4300B User's Manual.
ii Cop y right Cop y right 2004 b y PLANE T T echnolog y Corp. All rights reserved. No part o f this publication m a y be reproduced, trans m itted, transcribed, stored in a retrieval s y ste m , .
iii R&TTE Compliance Statement T his equip m ent co m plies w ith all the require m ents o f DIREC T IVE 1999/5/CE OF T HE EUROPEAN PARLIAMEN T AND T HE COUNCIL OF 9 March 1999 on radio equip m en.
.
i Table of Contents CH A P T ER 1 IN T RODUC T IO N ..................................................................................... .1 A DSL Wireless Fire w all Router Feature s ........................................................... .1 Package Content s .
ii A PPENDIX A T ROUBLESHOO T IN G ......................................................................... . 73 O v er v ie w ............................................................................................................. . 73 General Problem s .
1 Chapter 1 Introduction This Chapter provides an overview of the ADSL W ireless Firewall Router's features and capabilities. Congratulations on the purchase o f y our ne w ADSL W ireless Fire w all Router, AD W- 4300. T he ADSL W ireless Fire w all Router is a m ulti- f unction device providing the f ollo w ing services: • ADSL Modem .
ADSL W ireless Fire w all Router User Guide 2 • Fixed or Dynamic IP Address. On the Internet ( W AN port) connection, the ADSL W ireless Fire w all Router supports both D y na m ic IP Address (IP Address is allocated on connection) and Fixed IP Address.
Introduction 3 Configuration & Management • Easy Setup. Use y our W EB bro w ser f ro m an y w here on the LAN or W LAN f or con f iguration. • Configuration File Upload/Download.
ADSL W ireless Fire w all Router User Guide 4 Ph y sical Details Front-mounted LEDs Figure 2: Front Panel PWR LED On - Po w er on. Off - No po w er. S T A T US LED Off - Nor m al operation. Blinking - T his LED blin k s during start up, and during a Fir m w are Upgrade.
Introduction 5 Rear Panel Figure 3: Rear Panel Po w er port Connect the supplied po w er adapter here. 10/100Base T L A N connec- tions Use standard LAN cables (RJ45 connectors) to connect y our PCs to these ports.
6 Chapter 2 Ins t allation This Chapter covers the physical installation of the ADSL W ireless Firewall Router. Requirements • Net w or k cables. Use standard 10/100Base- T X net w or k (U T P) cables w ith RJ45 connectors. • T CP/IP protocol m ust be installed on all PCs.
Installation 7 2. Connect L A N Cables Use standard LAN cables to connect PCs to the S w itching Hub ports on the ADSL W ireless Fire w all Router. Both 10Base- T and 100Base- T X connections can be used si m ultaneousl y . I f required, connect an y port to a nor m al port on another Hub, using a standard LAN cable.
8 Chapter 3 Setup This Chapter provides Setup details of the ADSL W ireless Firewall Router. O v er v ie w T his chapter describes the setup procedure f or: • Internet Access • LAN con f iguration • W ireless setup • Assigning a Pass w ord to protect the con f iguration data.
Setup 9 Configuration Program T he ADSL W ireless Fire w all Router contains an H TT P server. T his enables y ou to connect to it, and con f igure it, using y our W eb Bro w ser. Your Bro w ser must support Ja v aScript . T he con f iguration progra m has been tested on the f ollo w ing bro w sers: • Netscape V4.
ADSL W ireless Fire w all Router User Guide 10 If y ou can't connect I f the ADSL W ireless Fire w all Router does not respond, chec k the f ollo w ing: • T he ADSL W ireless Fire w all Router is properl y installed, LAN connec- tion is OK, and it is po w ered ON.
Setup 11 Common Connection T y pes T y pe Details ISP Data required D y na m ic IP Address Y our IP Address is allocated auto m aticall y , w hen y ou con- nect to y ou ISP. a) ADSL para m eters (VPI and VCI) m a y be required, i f the y cannot be detected auto m ati- call y .
ADSL W ireless Fire w all Router User Guide 12 Home Screen A f ter f inishing the Setup W i z ard, y ou w ill see the Home screen. W hen y ou connect in f uture, y ou w ill see this screen w hen y ou connect.
Setup 13 L A N Screen Use the LAN lin k on the m ain m enu to reach the LAN screen. An exa m ple screen is sho w n belo w . Figure 6: L A N Screen Data - L A N Screen T CP/IP IP A ddress IP address f or the ADSL W ireless Fire w all Router, as seen f ro m the local LAN.
ADSL W ireless Fire w all Router User Guide 14 • T he ADSL W ireless Fire w all Router can act as a DHCP ser v er . • W indo w s 95/98/ME and other non-Server versions o f W indo w s w ill act as a DHCP client . T his is the de f ault W indo w s setting f or the T CP/IP net w or k protocol.
Setup 15 Wireless Screen T he ADSL W ireless Fire w all Router's settings m ust m atch the other W ireless stations. Note that the ADSL W ireless Fire w all Router w ill auto m aticall y accept both 802.11b and 802.11g connections, and no con f iguration is required f or this f eature.
ADSL W ireless Fire w all Router User Guide 16 Options M ode Select the desired m ode: • g & b - Both 802.11.g and 802.11b W ireless stations w ill be able to use the ADSL W ireless Fire w all Router. • g only - Onl y 802.11g W ireless stations can use the ADSL W ireless Fire w all Router.
Setup 17 Set Stations Button Clic k this button to m anage the trusted PC database..
ADSL W ireless Fire w all Router User Guide 18 WEP Screen T his screen is accessed b y clic k ing the "Con f igure W EP" button on the W ireless screen.
Setup 19 Pass w ord Screen T he pass w ord screen allo w s y ou to assign a pass w ord to the ADSL W ireless Fire w all Router. Figure 9: Pass w ord Screen Old Pass w ord Enter the existing pass w ord in this f ield. Ne w pass w ord Enter the ne w pass w ord here.
20 Chapter 4 PC Configuration This Chapter details the PC Configuration required on the local ("Inter- nal") LAN. O v er v ie w For each PC, the f ollo w ing m a y need to be con f igured: .
PC Configuration 21 Checking TCP/IP Settings - Windo w s 9x/ME: 1. Select Control Panel - Network . Y ou should see a screen li k e the f ollo w ing: Figure 11: Net w ork Configuration 2. Select the TCP/IP protocol f or y our net w or k card. 3. Clic k on the Properties button.
ADSL W ireless Fire w all Router User Guide 22 • On the Gateway tab, enter the ADSL W ireless Fire w all Router's IP address in the New Gateway f ield and clic k Add , as sho w n belo w . Y our LAN ad m inistrator can advise y ou o f the IP Address the y assigned to the ADSL W ireless Fire w all Router.
PC Configuration 23 Checking TCP/IP Settings - Windo w s NT4.0 1. Select Control Panel - Network , and, on the Protocols tab, select the T CP/IP protocol, as sho w n belo w . Figure 15: Windo w s N T 4.0 - T CP/IP 2. Clic k the Properties button to see a screen li k e the one belo w .
ADSL W ireless Fire w all Router User Guide 24 Figure 16: Windo w s N T 4.0 - IP A ddress 3. Select the net w or k card f or y our LAN. 4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address , as explained belo w .
PC Configuration 25 Figure 17 - Windo w s N T 4.0 - A dd Gate w a y 2. T he DNS should be set to the address provided b y y our ISP, as f ollo w s: • Clic k the DNS tab. • On the DNS screen, sho w n belo w , clic k the Add button (under DNS Service Search Order ), and enter the DNS provided b y y our ISP.
ADSL W ireless Fire w all Router User Guide 26 Figure 18: Windo w s N T 4.0 - DNS.
PC Configuration 27 Checking TCP/IP Settings - Windo w s 2000: 1. Select Control Panel - Network and Dial-up Connection . 2. Right - clic k the Local Area Connection icon and select Properties . Y ou should see a screen li k e the f ollo w ing: Figure 19: Net w ork Configuration (Win 2000) 3.
ADSL W ireless Fire w all Router User Guide 28 Figure 20: T CP/IP Properties (Win 2000) 5. Ensure y our T CP/IP settings are correct, as described belo w . Using DHCP T o use DHCP, select the radio button Obtain an IP Address automatically . T his is the de f ault W indo w s setting.
PC Configuration 29 Checking TCP/IP Settings - Windo w s XP 1. Select Control Panel - Network Connection . 2. Right clic k the Local Area Connection and choose Properties . Y ou should see a screen li k e the f ollo w ing: Figure 21: Net w ork Configuration (Windo w s XP) 3.
ADSL W ireless Fire w all Router User Guide 30 Figure 22: T CP/IP Properties (Windo w s XP) 5. Ensure y our T CP/IP settings are correct. Using DHCP T o use DHCP, select the radio button Obtain an IP Address automatically . T his is the de f ault W indo w s setting.
PC Configuration 31 Internet A ccess T o con f igure y our PCs to use the ADSL W ireless Fire w all Router f or Internet access: • Ensure that the DSL m ode m , Cable m ode m , or other per m anent connection is f unctional.
ADSL W ireless Fire w all Router User Guide 32 M acintosh Clients Fro m y our Macintosh, y ou can access the Internet via the ADSL W ireless Fire w all Router. T he procedure is as f ollo w s. 1. Open the T CP/IP Control Panel. 2. Select Ethernet f ro m the Connect via pop-up m enu.
PC Configuration 33 Wireless Station Configuration T his section applies to all W ireless stations w ishing to use the ADSL W ireless Fire w all Router's Access Point, regardless o f the operating s y ste m w hich is used on the client.
34 Chapter 5 Operation and S t atus This Chapter details the operation of the ADSL W ireless Firewall Router and the status screens. Operation Once both the A DSL Wireless Fire w all Router and the PCs are configured, op- eration is automatic. Ho w ever, there are so m e situations w here additional Internet con f iguration m a y be required.
Operation and Status 35 Data - Status Screen Internet M odem Status T his indicates the status o f the ADSL m ode m co m ponent. Do w nStream Connection Speed I f connected, displa y s the speed f or the Do w nStrea m (do w nload) ADSL Connection.
ADSL W ireless Fire w all Router User Guide 36 S y stem De v ice Name T he current na m e o f the ADSL W ireless Fire w all Router. T his is also the "hostna m e" provided to ISPs w ho request this in f or m ation. Firm w are Version T he version o f the current f ir m w are installed.
Operation and Status 37 Buttons Connect I f not connected, establish a connection to y our ISP. Disconnect I f connected to y our ISP, hang up the connection.
ADSL W ireless Fire w all Router User Guide 38 Buttons Release I f an IP Address has been allocated to the ADSL W ireless Fire w all Router (b y the ISP's DHCP Server, clic k ing the "Re- lease" button w ill brea k the connection and release the IP Address.
Operation and Status 39 Connection Details - Fixed IP A ddress I f y our access m ethod is "Direct" (no login), w ith a f ixed IP address, a screen li k e the f ollo w ing exa m ple w ill be displa y ed w hen the "Connection Details" button is clic k ed.
40 Chapter 6 Advanced Features This Chapter explains when and how to use the ADSL W ireless Fire- wall Router's "Advanced" Features. O v er v ie w T he f ollo w ing advanced f eatures a.
Advanced Features 41 URL Filter I f y ou w ant to li m it access to certain sites on the Internet, y ou can use this f eature. T he URL f ilter w ill chec k each W eb site access. I f the address, or part o f the address, is included in the bloc k site list, access w ill be denied.
ADSL W ireless Fire w all Router User Guide 42 T rusted PC A llo w T rusted PC Enable this to allo w one co m puter to have unrestricted access to the Internet. For this PC, the URL f ilter w ill be ignored. I f enabled, y ou m ust select the PC to be the trusted PC.
Advanced Features 43 D y namic DNS Screen Select Advanced on the m ain m enu, then Dynamic DNS , to see a screen li k e the f ollo w ing: Figure 29: DDNS Screen Data - D y namic DNS Screen DDNS Ser v ice Use a D y namic DNS Ser v ice Use this to enable or disable the DDNS f eature as required.
ADSL W ireless Fire w all Router User Guide 44 Fire w all Rules T he Firewall Rules screen allo w s y ou to de f ine "Fire w all Rules" w hich can allo w or prevent certain tra ff ic. B y de f ault: • All Outgoing tra ff ic is per m itted.
Advanced Features 45 L A N Ser v er T he PC or Server on y our LAN to w hich tra ff ic covered b y this rule w ill be sent. W A N Users T he W AN IP address or addresses covered b y this rule. Log Indicates w hether or not connections covered b y this rule should be logged.
ADSL W ireless Fire w all Router User Guide 46 Incoming Rules T his screen is displa y ed w hen the "Add" or "Edit" button f or Inco m ing Rules is clic k ed. Figure 31: Inbound Ser v ices Screen Data – Incoming Rules Screen Inbound Ser v ices Ser v ice Select the desired Service.
Advanced Features 47 gle/Start" f ields. Log T his deter m ines w hether pac k ets covered b y this rule are logged. Select the desired action. • A l w a ys - al w a y s log tra ff ic considered b y this rule, w hether it m atches or not. ( T his is use f ul w hen debugging y our rules.
ADSL W ireless Fire w all Router User Guide 48 w hich is currentl y bloc k ed b y another rule.) • T o de f ine the Schedule used in these selections, use the "Schedule" screen. L A N Users Select the desired option to deter m ine w hich PCs are covered b y this rule: • A ny - All PCs are covered b y this rule.
Advanced Features 49 Fire w all Ser v ices T his screen is used to m odi f y the list o f Services w hich are available w hen creating Fire w all Rules. Figure 33: A dd Ser v ices Screen Data – A dd Ser v ices Ser v ices Ser v ices List T his lists all de f ined Services.
ADSL W ireless Fire w all Router User Guide 50 A dd/Edit Ser v ice T his screen is displa y ed w hen the Add or Edit button on the Services screen is clic k ed. Figure 34 : A dd/Edit Ser v ice Data – A dd/Edit Ser v ice Ser v ices Name I f editing, this sho w s the current na m e o f the Service.
Advanced Features 51 Options T his screen allo w s advanced users to enter or change a nu m ber o f settings. For nor m al operation, there is no need to use this screen or change an y settings.
ADSL W ireless Fire w all Router User Guide 52 Schedule T his Schedule can be used f or the Fire w all Rules and the URL f ilter. Figure 36: Schedule Screen Data - Schedule Screen Schedule Sunda y , M on- day … Use these chec k boxes to select the desired da y s.
Advanced Features 53 Virtual Ser v ers T his f eature, so m eti m es called Port Forwarding , allo w s y ou to m a k e Servers on y our LAN accessible to Internet users. Nor m all y , Internet users w ould not be able to access a server on y our LAN because: • Y our Server does not have a valid external IP Address.
ADSL W ireless Fire w all Router User Guide 54 Figure 38: Virtual Ser v ers Screen Data - Virtual Ser v ers Screen Ser v ers Ser v ers T his lists a nu m ber o f co mm on Server t y pes. I f the desired Server t y pe is not listed, y ou can create a Fire w all Rule to achieve the sa m e e ff ect as the Virtual Server f unction.
55 Chapter 7 Advanced Administration This Chapter explains the settings available via the "Administration" section of the menu. O v er v ie w Nor m all y , it is not necessar y to use these screens, or change an y settings.
ADSL W ireless Fire w all Router User Guide 56 PC Database T he PC Database is used w henever y ou need to select a PC (e.g. f or the "DMZ" PC). • It eli m inates the need to enter IP addresses. • Also, y ou do not need to use f ixed IP addresses on y our LAN.
Advanced Ad m inistration 57 Data - PC Database Screen Kno w n PCs T his lists all current entries. Data displa y ed is name (IP Address) type . T he "t y pe" indicates w hether the PC is connected to the LAN. Name I f adding a ne w PC to the list, enter its na m e here.
ADSL W ireless Fire w all Router User Guide 58 PC Database ( A dmin) T his screen is displa y ed i f the "Advanced Ad m inistration" button on the PC Database is clic k ed.
Advanced Ad m inistration 59 M A C A ddress Select the appropriate option • A utomatic disco v ery - Select this to have the ADSL W ire- less Fire w all Router contact the PC and f ind its MAC address. T his is onl y possible i f the PC is connected to the LAN and po w ered On.
ADSL W ireless Fire w all Router User Guide 60 Config File T his f eature allo w s y ou to do w nload the current settings f ro m the ADSL W ireless Fire w all Router, and save the m to a f ile on y our PC.
Advanced Ad m inistration 61 Logging T he Logs record various t y pes o f activit y on the ADSL W ireless Fire w all Router. T his data is use f ul f or troubleshooting, but enabling all logs w ill generate a large a m ount o f data and adversel y a ff ect per f or m ance.
ADSL W ireless Fire w all Router User Guide 62 Logs Include (Check- boxes) Use these chec k boxes to deter m ine w hich events are included in the log. Chec k ing all options w ill increase the si z e o f the log, so it is good practice to disable an y events w hich are not reall y required.
Advanced Ad m inistration 63 E-mail T his screen allo w s y ou to E- m ail Logs and Alerts. A sa m ple screen is sho w n belo w . Figure 43: E-mail Screen Data – E-mail Screen E- M ail Notification T urn E-mail Notification on Chec k this box to enable this f eature.
ADSL W ireless Fire w all Router User Guide 64 E-mail A lerts Send E-mail alerts immedi- atel y Y ou can choose to have alerts E- m ailed to y ou, b y chec k ing the desired chec k boxes.
Advanced Ad m inistration 65 Diagnostics T his screen allo w s y ou to per f or m a "Ping" or a "DNS loo k up". T hese activities can be use f ul in solving net w or k proble m s. An exa m ple Network Diagnostics screen is sho w n belo w .
ADSL W ireless Fire w all Router User Guide 66 Remote A dmin I f enabled, this f eature allo w s y ou to m anage the ADSL W ireless Fire w all Router via the Internet.
Advanced Ad m inistration 67 T o connect from a remote PC v ia the Internet 1. Ensure y our Internet connection is established, and start y our W eb Bro w ser. 2. In the "Address" bar, enter "H TT P://" f ollo w ed b y the Internet IP Address o f the ADSL W ireless Fire w all Router.
ADSL W ireless Fire w all Router User Guide 68 Routing O v er v ie w • I f y ou don't have other Routers or Gate w a y s on y our LAN, y ou can ignore the "Routing" page co m pletel y .
Advanced Ad m inistration 69 Figure 46: Routing Screen Data - Routing Screen RIP RIP Direction Select the desired RIP Direction. RIP Version Choose the RIP Version f or the Server. Static Routing Static Routing T able Entries T his list sho w s all entries in the Routing T able.
ADSL W ireless Fire w all Router User Guide 70 Destination IP A ddress Nor m all y 0.0.0.0, but chec k y our router docu m enta- tion. Net w ork M ask Nor m all y 0.0.0.0, but chec k y our router docu m enta- tion. Gate w a y IP A ddress T he IP Address o f the ADSL W ireless Fire w all Router.
Advanced Ad m inistration 71 Entr y 2 (Segment 2) Destination IP Address 192.168.2.0 Net w or k Mas k 255.255.255.0 (Standard Class C) Gate w a y IP Address 192.168.0.100 Metric 3 For Router A 's Default Route Destination IP Address 0.0.0.0 Net w or k Mas k 0.
ADSL W ireless Fire w all Router User Guide 72 Upgrade Firm w are T he f ir m w are (so f t w are) in the ADSL W ireless Fire w all Router can be upgraded using y our W eb Bro w ser. Y ou m ust f irst do w nload the upgrade f ile, then select Upgrade Firmware on the Ad- ministration m enu.
73 A ppendix A T roubleshooting This Appendix covers the most likely problems and their solutions. O v er v ie w T his chapter covers so m e co mm on proble m s that m a y be encountered w hile using the ADSL W ireless Fire w all Router and so m e possible solutions to the m .
ADSL W ireless Fire w all Router User Guide 74 Problem 2: Some applications do not run properl y w hen using the A DSL Wireless Fire w all Router. Solution 2: T he ADSL W ireless Fire w all Router processes the data passing through it, so it is not transparent.
Appendi x A - Troubleshooting 75 • RF Shielding Y our environ m ent m a y tend to bloc k trans m ission bet w een the w ireless stations. T his w ill m ean high access speed is onl y possi- ble w hen close to the ADSL W ireless Fire w all Router.
76 A ppendix B About W ireless LANs This Appendix provides some background information about using W ireless LANs ( W LANs). M odes W ireless LANs can w or k in either o f t w o (2) m odes: • Ad-hoc • In f rastructure A d-hoc Mode Ad-hoc m ode does not require an Access Point or a w ired (Ethernet) LAN.
Appendi x A - Troubleshooting 77 Channels T he W ireless Channel sets the radio f requenc y used f or co mm unication. • Access Points use a f ixed Channel. Y ou can select the Channel used. T his allo w s y ou to choose a Channel w hich provides the least inter f erence and best per f or m- ance.
ADSL W ireless Fire w all Router User Guide 78.
79 A ppendix C S pecifications A DSL Wireless Fire w all Router Product 802.11g ADSL W ireless Fire w all Router Model AD W -4300A / AD W -4300B Hard w are Standard ANSI T 1.413 Issue 2 I T U G.992.1 (G.d m t) including - Annex A (ADSL over PO T S f or AD W -4300A) - Annex B (ADSL over ISDN f or AD W -4300B) G.
ADSL W ireless Fire w all Router User Guide 80 Po w er 15V AC, 1A Po w er Consu m ption Maxi m u m 15 W , 51 B T U T e m perature: Hu m idity 0~40 degree C (operating), -10~70 degree C (storage) 5%~ 9.
Appendi x B - Specifications 81 Regulator y A ppro v als FCC Statement T his equip m ent has been tested and f ound to co m pl y w ith the li m its f or a Class B digital device, pursuant to Part 15 o f the FCC Rules. T hese li m its are designed to provide reasonable protection against har m f ul inter f erence in a residential installation.
Ein wichtiger Punkt beim Kauf des Geräts Planet ADW-4300B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planet ADW-4300B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planet ADW-4300B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planet ADW-4300B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planet ADW-4300B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planet ADW-4300B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planet ADW-4300B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planet ADW-4300B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planet ADW-4300B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
