Benutzeranleitung / Produktwartung LC640.480.33-AC des Produzenten Planar
Zur Seite of 28
Operations Manual LC640.480.33-AC H IGH B RIGHTNESS 10.4" C OLOR TFT AMLCD T he D e f i n i t i on o f Q ua li t y ®.
Copyright © 1999 by Planar Systems, Inc. Planar and The Definition of Quality are registered trademarks. ColorBrite is a trademark of Planar Systems, Inc. This document is subject to change without notice. Planar provides this information as reference only and does not imply any recommendation or endorsement of other vendor’s products.
Contents LC640.480.33-AC Display .............................................................................................................. 3 Features and Benefits ...................................................................................
LC640.480.33-AC Operations Manual (OM600-01) 2 Figures Figure 1. Mounting Options. ........................................................................................................ 4 Figure 2. Power Sequencing. .................................
LC640.48 0.33-AC Operations Manual (OM600-01) 3 LC640.480.33- AC Display The LC640.480.33-AC is a 1000 nit 10.4" diagonal VGA color AMLCD flat panel display module intended for commercial applications requiring outdoor viewability and long life.
LC640.480.33-AC Operations Manual (OM600-01) 4 Installation and Handling Do not drop, bend, or flex the display. Do not allow objects to strike the surface of the display. Mounting the Display To maximize shock and vibration performance, the display must be properly mounted using all four mounting hole locations.
LC640.48 0.33-AC Operations Manual (OM600-01) 5 Vent Clearance The LC640.480.33-AC display is a wide temperature display utilizing convection cooling. It is imperative to allow ambient air unrestricte.
LC640.480.33-AC Operations Manual (OM600-01) 6 Specifications Performance characteristics are guaranteed with the display at room temperature (25 °C) and with the operating voltage within specifications, unless otherwise specified.
LC640.48 0.33-AC Operations Manual (OM600-01) 7 Optical Characteristics Table 4 . Optical Characteristics. Luminance Typical Minimum 1000 NITs at screen center, initial 900 NITs at screen center, init.
LC640.480.33-AC Operations Manual (OM600-01) 8 Interfacing and Operation Control Basics Power Requirements The LC640.480.33-AC display requires two power supplies: +5 Vdc for the LCD logic and +12 Vdc for the backlight. In Table 6 below, the backlight current and power are referenced to maximum luminance, 25 °C ambient temperature.
LC640.48 0.33-AC Operations Manual (OM600-01) 9 Figure 2 . Power Sequencing. data t3 t2 t1 Vcc 4.5V 4.5V 2.7V where: t 1 ≤ 10ms 0< t 2 ≤ 10ms 0< t 3 ≤ 1s Applying video signals before V L is applied may cause a latchup condition.
LC640.480.33-AC Operations Manual (OM600-01) 10 Video Signals Video Signal Characteristics Video signal inputs on J3 are digital inputs and are compatible with CMOS logic. Table 8 . Video Signal DC Characteristics. Description Symbol Minimum Maximum Units Absolute Maximum Input Voltage V I max -0.
LC640.48 0.33-AC Operations Manual (OM600-01) 11 Signal Timing Video signal timing diagrams are shown in Figures 5, 6, and 7. The following table refers to these diagrams. Table 10 . Video signal timing. Parameter Symbol Mode Min Typ Max Units Clock freq 1/Tc all – 25.
LC640.480.33-AC Operations Manual (OM600-01) 12 Figure 5 . Timing Diagram, 480-line mode. Tcl Tds Tdh 0.3Vcc Number of V-data line Vertical invalid data period DH479 DH480 DH3 DH2 DH1 TV TVd 0.3Vcc Number of line 0.7Vcc 34 Tcp TVs TVp Tcs TVh 0.3Vcc 0.
LC640.48 0.33-AC Operations Manual (OM600-01) 13 Figure 6 . Timing Diagram, 400-line mode. Tcl Tds Tdh 0.7Vcc Number of V-data line Vertical invalid data period DH399 DH400 DH3 DH2 DH1 TV TVd 0.3Vcc Number of line 0.3Vcc 34 Tcp TVs TVp Tcs TVh 0.7Vcc 0.
LC640.480.33-AC Operations Manual (OM600-01) 14 Figure 7 . Timing Diagram, 350-line mode. Tcl Tds Tdh 0.3Vcc Number of V-data line Vertical invalid data period DH349 DH350 DH3 DH2 DH1 TV TVd 0.3Vcc Number of line 0.7Vcc 61 Tcp TVs TVp Tcs TVh 0.3Vcc 0.
LC640.48 0.33-AC Operations Manual (OM600-01) 15 Video Characteristics Colors are developed in combination with 6-bit signals (64 steps in grayscale) of each primary red, green, and blue color. This process can result in up to 262,144 (64x64x64) colors.
LC640.480.33-AC Operations Manual (OM600-01) 16 Pixel Position The position of pixel data, relative to the color filter orientation and scan direction inputs is shown in Figure 8 . Refer to the timing diagrams in Figures 5, 6, and 7 for horizontal pixel position (D1 through D640), and for vertical line position (DH1 through DH480).
LC640.48 0.33-AC Operations Manual (OM600-01) 17 Video Connector (J3) Video signals and LCD display power (V L ) are applied via a polarized 34-pin dual-row 2 mm pitch header with gold plated (30 µ ") contact surfaces and ejector/latching ears.
LC640.480.33-AC Operations Manual (OM600-01) 18 Dimming Connector (J2) A dimming voltage or potentiometer, plus optional backlight mode and disable logic inputs are applied via J2, which is a polarized 5-pin inline, 2.5 mm pitch header, tin plated with a friction lock.
LC640.48 0.33-AC Operations Manual (OM600-01) 19 Optical Features Viewing Angle Viewing angles are defined per Figure 10 below: Figure 10 . Viewing Angles.
LC640.480.33-AC Operations Manual (OM600-01) 20 Backlight Dimming Modes The backlight may be operated in one of four modes without the use of jumpers or switches. The mode is selected based on the state of the /ABCOFF input and on whether the dimming input is left open or connected to a voltage source.
LC640.48 0.33-AC Operations Manual (OM600-01) 21 Method A represents sourcing the dimming input from a voltage source such as a DAC or analog op amp. The device should be powered from +5 Vdc such that the device’s output will not exceed the allowable input range of the dimming input.
LC640.480.33-AC Operations Manual (OM600-01) 22 Temperature Considerations Thermal Shutdown A thermal sensor referenced to the center of the backlight/inverter ECA prevents the inverter from starting at an ambient temperature of –30 ° C or below, and will shut off the backlight at an ambient temperature of approximately +90 ° C and above.
LC640.48 0.33-AC Operations Manual (OM600-01) 23 Warm-up Characteristic Some time after startup is required to allow the CCFL tubes to reach their normal operating temperature. The graph in Figure 14 shows the typical room temperature warmup curve for the LC640.
LC640.480.33-AC Operations Manual (OM600-01) 24 Figure 15 . Display Dimensions..
Description of Warranty This description is not the full warranty, and should not be construed as a substitute for the full warranty. A copy of the full warranty is available upon request.
North & South America OEM Sales Europe & Asia-Pacific OEM Sales Planar Systems, Inc. 1400 NW Compton Drive Beaverton, OR 97006-1992 Tel. +1 (503) 690 1100 Fax +1 (503) 690 1493 sales@planar.com app_eng@planar.com Planar Systems, Inc. Olarinluoma 9, P.
Ein wichtiger Punkt beim Kauf des Geräts Planar LC640.480.33-AC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planar LC640.480.33-AC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planar LC640.480.33-AC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planar LC640.480.33-AC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planar LC640.480.33-AC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planar LC640.480.33-AC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planar LC640.480.33-AC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planar LC640.480.33-AC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planar LC640.480.33-AC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
