Benutzeranleitung / Produktwartung VSX-82TXS-S des Produzenten Pioneer
Zur Seite of 92
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-84TXSi VSX-84TXSi-S VSX-82TXS VSX-82TXS-S Operating Instructions Register your product at www .pioneerelectronics.
W ARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. D1-4-2-1_En IMPORT ANT NOTICE – THE SERIAL NUMBER FOR THIS EQUIPMENT IS L OCA TED IN THE REAR. PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCL OSED W ARRANTY CARD AND KEEP IN A SECURE AREA.
READ INSTRUCTIONS — All the safety and operating instructions should be read before the product is operated. RET AIN INSTRUCTIONS — The safety and operating instructions should be retained for future reference. HEED WARNINGS — All warnings on the product and in the operating instructions should be adhered to.
4 En Contents 01 Before you start Checking what’s in the box . . . . . . . . . . . . . . . . . . . . . . . 6 Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing the receiver . . . . . . . . . . . . . . .
5 En Using XM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Connecting your XM Radio receiver . . . . . . . . . . . . . 48 Listening to XM Radio . . . . . . . . . . . . . . . . . . . . . . . . . 49 Using XM HD Surround . . . .
Before you start 01 6 En Chapter 1: Before you start Checking what’s in the box Please check that you've received the following supplied accessories: • Setup microphone (cable: 16.
5 minute guide 02 7 En Chapter 2: 5 minute guide Introduction to home theater Home theater refers to the use of multiple audio tracks to create a surround sound effect, making you feel like you're in the middle of the action or concert.
5 minute guide 02 8 En 1 Switch on the receiver and your TV. 2 Connect the microphone to the MCACC SETUP MIC jack on the front panel. Place the microphone so that it’s about ear level at your normal listening position (use a tripod if possible). Make sure there are no obstacles between the speakers and the microphone.
5 minute guide 02 9 En Problems when using the Auto MCACC Setup If the room environment is not optimal for the Auto MCACC Setup (too much background noise, echo off the walls, obstacles blocking the speakers from the microphone) the final settings may be incorrect.
Connecting your equipment 03 10 En Chapter 3 Connecting your equipment This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This page explains the kinds of components you can connect to make up your home theater system.
Connecting your equipment 03 11 En This product incorporates copyright pr otection technology that is protected by U.S. patents and other intellectual property rights.
Connecting your equipment 03 12 En Connecting your TV and DVD player The diagram shows a basic setup of this receiver together with a TV and DVD player, with S-video or composite video connections. Different TVs and DVD players may offer alternative connections.
Connecting your equipment 03 13 En Connecting a satellite/cable receiver or other set-top box Satellite and cable receivers, and terrestrial digital TV tuners are all examples of so-called ‘set-top boxes’. 1 Connect the audio/video outputs on the set-top box to the SAT AUDIO and VIDEO inputs.
Connecting your equipment 03 14 En • For a second recorder, use the DVR/ VCR2 outputs. 3 If the device can output digital audio, connect an optical-type 1 digital audio output from the recorder to the DIGITAL 2 (DVR/VCR1) input. Use an optical cable for the connection.
Connecting your equipment 03 15 En Connecting digital audio sources This receiver has both digital inputs and outputs, allowing you to connect digital audio components for playback and for making digital recordings. Most digital components also have analog connections.
Connecting your equipment 03 16 En Connecting analog audio sources This receiver features three stereo audio-only inputs. Two of these inputs have corresponding outputs for use with audio recorders. One of the audio inputs ( PHONO ) is a dedicated turntable input which should not be used for any other type of component.
Connecting your equipment 03 17 En Installing your speaker system To take full advantage of the receiver’s surround sound capabilities connect front, center, surround and surround back speakers, as well as a subwoofer.
Connecting your equipment 03 18 En Bare wire connections Make sure that the speaker cable you’re going to use is properly prepared with about 3 / 8 in. (10 mm) of insulator stripped from each wire, and the exposed wire strands twisted together ( fig.
Connecting your equipment 03 19 En The diagrams below show suggested surround and surround back speaker orientation. The first diagram ( fig. A ) shows orientation with one surround back speaker (or none) connected. The second ( fig. B ) shows orientation with two surround back speakers connected.
Connecting your equipment 03 20 En FM wire antenna • Connect the FM wire antenna to the FM UNBAL 75 Ω in the same way as the AM antenna. For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.
Controls and displays 04 21 En Chapter 4: Controls and displays Front panel Illustration shows the VSX-84TXSi front panel 1 INPUT SELECTOR dial Use to select an input source. 2 STANDBY/ON Switches the receiver between on and standby. Power indicator lights when the receiver is on.
Controls and displays 04 22 En 9 MCACC indicator Lights when one of the MCACC presets (page 29) is selected. 10 i.LINK indicator (VSX-84TXSi only) Lights when an i.
Controls and displays 04 23 En Display 1 SIGNAL indicators Light to indicate the currently selected input signal. AUTO lights when the receiver is set to select the input signal automatically (page 30). 2 Program format indicators These change according to which channels are active in digital sources.
Controls and displays 04 24 En Remote control The remote has been conveniently color-coded according to component control using the following system (press the corresponding input source button to acc.
Controls and displays 04 25 En 7 TV CONTROL buttons These buttons are dedicated to control the TV assigned to the TV CONT button. Thus if you only have one TV to hook up to this system assign it to the TV CONT input source button. If you have two TVs, assign the main TV to the TV CONT button (see page 71 for more on this).
Controls and displays 04 26 En Sub remote control unit VSX-84TXSi only The second remote control supplied with this receiver is for use with the multi-room listening feature, as explained on page 57. Note that you must connect a separate IR receiver as explained in Connecting an IR receiver on page 59 for remote control in your sub room(s).
Listening to your system 05 27 En Chapter 5: Listening to your system Important • The listening modes and many features described in this section may not be available depending on the current source, settings and status of the receiver. See Listening modes with different input signal formats on page 86 for more on this.
Listening to your system 05 28 En • 2 Pro Logic IIx MOVIE – See above (only available when you’re using two surround back speakers) • 2 Pro Logic IIx MUSIC – See above • Dolby Digital EX – Creates surround back channel sound for 5.1 channel sources and provides pure decoding for 6.
Listening to your system 05 29 En Tip • When an Advanced Surround listening mode is selected (except ADV. VIR. SURR. ), the effect level can be adjusted using the EFFECT parameter in Setting the AV options on page 66.
Listening to your system 05 30 En Choosing the input signal You need to hook up a component to both analog and digital inputs on the receiver to select between input signals. 1 • Press SIGNAL SEL (SIGNAL SELECT ) to select the input signal corresponding to the source component.
Listening to your system 05 31 En • VirtualSB OFF – Virtual Surround Back mode is switched off Using the Sound Retriever When audio data is removed during the WMA/MP3/ MPEG-4 AAC compression process, sound quality often suffers from an uneven sound image.
Using the tuner 06 32 En Chapter 6: Using the tuner Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a station below.
Using the tuner 06 33 En Saving station presets If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. This saves the effort of manually tuning in each time.
The System Setup menu 07 34 En Chapter 7: The System Setup menu Making receiver settings from the System Setup menu The following section shows you how to make detailed settings to specify how you’r.
The System Setup menu 07 35 En 1 Connect the microphone to the MCACC SETUP MIC jack on the front panel. Make sure there are no obstacles between the speakers and the microphone. If you have a tripod, use it to place the microphone so that it’s about ear level at your normal listening position.
The System Setup menu 07 36 En • With error messages (such as Ambient Noise or Microphone Check ) select RETRY after checking for ambient noise (see Problems when using the Auto MCACC Setup on page 9) and verifying the mic connection. If there doesn’t seem to be a problem, you can simply select OK and continue.
The System Setup menu 07 37 En 1 Select ‘Surr Back System’ from the System Setup menu. See Making receiver settings from the System Setup menu above if you’re not already at this screen.
The System Setup menu 07 38 En The volume increases to the 0dB reference level. 2 Adjust the level of the left channel. This will be the reference speaker level, so you may want to keep the level around 0dB so that you’ll have plenty of room to adjust the other speaker levels.
The System Setup menu 07 39 En frequencies. Depending on speaker placement, your listening position, and ultimately the shape of your room, it results in an overly resonant (‘boomy’) sound. The Standing Wave Control uses filters to reduce the effect of overly resonant sounds in your listening area.
The System Setup menu 07 40 En How to use Professional Acoustic Calibration EQ If you find that lower frequencies seem overly reverberant in your listening room (i.e. it sounds `boomy'), or that different channels seem to exhibit different reverb characteristics, select Aco Cal EQ Pro.
The System Setup menu 07 41 En Using Professional Acoustic Calibration EQ 1 Select ‘EQ Professional’ then press ENTER. 2 Select an option and press ENTER .
The System Setup menu 07 42 En Data Management This system allows you to store up to six MCACC presets, allowing you to calibrate your system for different listening positions (or frequency adjustments for the same listening position).
The System Setup menu 07 43 En Renaming MCACC presets If you have several different MCACC presets that you’re using, you may want to rename them for easier identification. 1 Select ‘Memory Rename’ from the Data Management setup menu. 2 Select the MCACC preset you want to rename, then select an appropriate preset name.
The System Setup menu 07 44 En 2 Choose the set of speakers that you want to set then select a speaker size. Use / to select the size (and number) of each of the following speakers: 1 • Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a subwoofer.
The System Setup menu 07 45 En Tip • You can change the channel levels at any time by pressing CH LEVEL then using / on the remote control. Speaker Distance For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position.
The System Setup menu 07 46 En Set the bass peak level gradually, then press ENTER at the point just before the tone starts to distort. 1 The display on the receiver shows RESUME while the volume returns to its original position, then you automatically return to the main Bass Peak Level menu.
Other connections 08 47 En Chapter 8: Other connections Caution • Make sure the power is switched off before making or changing the connections. Connecting an iPod This receiver has a dedicated iPod terminal that will allow you to control playback of audio and video from your iPod using the controls of this receiver.
Other connections 08 48 En 2 Use the / buttons to browse the selected category (e.g., albums). • Use / to move to previous/next levels. 3 Continue browsing until you arrive at what you want to play, then press to start playback.
Other connections 08 49 En 1 Connect an XM Radio Connect-and-Play™ antenna to the XM Radio jack on the rear of this receiver. You will also need to activate the XM Radio service.
Other connections 08 50 En Listening to channel presets You will need to have some presets stored to do this. 1 Press CLASS to select the class in which the channel is stored. Press repeatedly to cycle through classes A, B and C. 2 Press / to select the channel preset you want.
Other connections 08 51 En 2 Use an HDMI cable to connect the HDMI OUT interconnect on this receiver to an HDMI interconnect on a HDMI-compatible monitor. • The arrow on the cable connector body should be facing right for correct alignment with the connector on the player.
Other connections 08 52 En 1 Use an i.LINK cable to connect one of the i.LINK connectors on this receiver to an i.LINK connector on your i.LINK component. • The arrow on the cable connector body should be lined up with the arrow (to the left of the connector) on the receiver for correct alignment.
Other connections 08 53 En About PQLS rate control Pioneer's PQLS (Precision Quartz Lock System) technology provides high-precision digital audio from DVD-A, SACD and audio CD sources when you use the i.
Other connections 08 54 En Connecting the multichannel analog inputs For DVD Audio and SACD playback, your DVD player may have 5.1, 6.1 or 7.1 channel analog outputs (depending on whether your player supports surround back channels). 1 Make sure that the player is set to output multichannel analog audio.
Other connections 08 55 En 1 Connect your computer’s USB terminal to the USB terminal on the rear panel of this receiver. 2 Switch on your computer and this receiver. 3 If you’re connecting for the first time, wait for the USB driver installation to finish.
Other connections 08 56 En • SP A – Sound is output from speaker system A and the same signal is output from the pre-out terminals. • SP B – Sound is output from the two speakers connected to speaker system B. Multichannel sources will not be heard.
Other connections 08 57 En Connecting additional amplifiers This receiver has more than enough power for any home use, but it’s possible to add additional amplifiers to every channel of your system using the pre-outs. Make the connections shown below to add amplifiers to power your speakers.
Other connections 08 58 En Multi-room listening options The following table shows what you can listen to in each sub room : Basic multi-room setup (ROOM 2) 1 Connect a separate amplifier to the MULTI-ROOM & SOURCE OUT jacks and a TV monitor to the MULTI- ROOM & SOURCE MONITOR OUT jacks, both on the rear of this receiver.
Other connections 08 59 En Using the multi-room controls The following steps use the front panel controls to adjust the sub room volume and select sources. See Multi-room remote controls below and (VSX-84TXSi only) Sub remote control unit on page 26 for more on using the remote control with the multi-room feature.
Other connections 08 60 En 1 Connect the IR receiver sensor to the MULTI-ROOM & SOURCE IR IN (MAIN ROOM) jack on the rear of this receiver. If you also plan to use a separate IR receiver in the sub room, connect this to the ROOM2(ZONE2) jack.
Other connections 08 61 En Important • If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma display remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you switch the plasma display off.
Other connections 08 62 En Connecting a PC for Advanced MCACC output If you use the Professional Acoustic Calibration EQ (see page 39) to measure the reverb characteristics of your listening room, you can check the results graphically using a computer connected to this receiver.
Other Settings 09 63 En Chapter 9: Other Settings The Input Setup menu You only need to make settings in the Input Setup menu if you didn’t hook up your digital equipment according to the default settings (see Input function default and possible settings below).
Other Settings 09 64 En • 12V Trigger 1 / 2 – After connecting a component to one of the 12 volt triggers (see Switching components on and off using the 12 volt trigger on page 60), select M. ROOM , ROOM2 , ROOM3 or OFF for the corresponding trigger setting to switch it on automatically along with the (main or sub) room specified.
Other Settings 09 65 En Multi-Room Setup • Default setting: Variable If you’ve made multi-room connections (see Multi-room listening on page 57) you may need to specify your volume setting. 1 Select ‘Multi-Room Setup’ from the System Setup menu.
Using other functions 10 66 En Chapter 10 Using other functions Setting the AV options There are a number of additional sound and picture settings you can make using the AV Parameter menu.
Using other functions 10 67 En Making an audio or a video recording You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV).
Using other functions 10 68 En • Note that the setting you make here is stored in memory, even if you switch off the receiver, so if you want to record a different input source later, you must do so with REC SELECT , or by selecting RECOUT SOURCE . 3 After RECOUT disappears from the display, select the input source you want to listen to.
Using other functions 10 69 En Checking your system settings Use the status display screen to check your current settings for features such as surround back channel processing and your current MCACC preset. 1 Press STATUS to check the system settings.
Using other functions 10 70 En 2 PL II Music Options Center Width 3 Dimension 0 Panorama OFF Neo:6 Options Center Image 3 All Inputs Listening Mode (2 ch) AUTO SURROUND Listening Mode (x ch) AUTO SURROUND Listening Mode (HP) STEREO See also Setting the AV options on page 66 for other default DSP settings.
Controlling the rest of your system 11 71 En Chapter 11: Controlling the rest of your system Setting the remote to control other components Most components can be assigned to one of the input source buttons (such as DVD/LD or CD ) using the component’s manufacturer preset code stored in the remote.
Controlling the rest of your system 11 72 En 4 Point the two remote controls towards each other then press the button that will be doing the learning on this receiver’s remote control. PRES KEY starts flashing to indicate the remote is ready to accept a signal.
Controlling the rest of your system 11 73 En 3 Press the button of the component for which you want to check the preset code, then press ENTER. The brand name and preset code appears in the display for three seconds.
Controlling the rest of your system 11 74 En 5 Use / to select a command in the sequence then press ENTER . If this is the first command in the sequence, select 1ST CODE . Otherwise, simply choose the next command in the sequence. PRES KEY flashes after you press ENTER .
Controlling the rest of your system 11 75 En Controls for TVs This remote control can control components after entering the proper codes or teaching the receiver the commands (see Setting the remote to control other components on page 71 for more on this).
Controlling the rest of your system 11 76 En Operating other Pioneer components with this unit’s sensor Many Pioneer components have SR CONTROL jacks which can be used to link components together so that you can use just the remote sensor of one component.
Additional information 12 77 En Chapter 12: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
Additional information 12 78 En Other audio problems No sound from the surround or center speakers. • Check that the Stereo listening mode isn’t selected; select one of the surround listening modes (see Listening in surround sound on page 27). • Check that the surround/center speakers are not set to NO (see Speaker Setting on page 43).
Additional information 12 79 En Video When playing a DTS format LD there is audible noise on the soundtrack. • Make sure that the input signal type is set to DIGITAL (see Choosing the input signal on page 30). Can't record audio. • You can only make a digital recording from a digital source, and an analog recording from an analog source.
Additional information 12 80 En Settings Professional Calibration EQ graphical output Display Symptom Remedy The Auto MCACC Setup continually shows an error . • The ambient noise level may be too high. Keep the noise level in the room as low as possible (see also Problems when using the Auto MCACC Setup on page 9).
Additional information 12 81 En Remote control i.LINK interface During playback of a DTS 96/24 source, the display doesn't show 96 kHz . • Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 30). When playing Dolby Digital or DTS sources, the receiver’s format indicators do not light.
Additional information 12 82 En i.LINK messages You may see the following messages displayed in the front panel display when using the i.LINK interface. USB interface HDMI The program format indicators don’t disappear when SACD playback stops. • The program format indicators remain lit until another format source is input.
Additional information 12 83 En iPod messages XM radio messages Note • If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.
Additional information 12 84 En Surround sound formats Below is a brief description of the main surround sound formats you’ll find on DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. Dolby The Dolby technologies are explained below.
Additional information 12 85 En WMA9 Pro can support up to 5.1/7.1 channel playback with sampling rates up to 24-bit/96 kHz. Using the unique WMA compression techniques, WMA9 Pro can deliver multichannel music and soundtracks over high-speed internet networks at low bit rates with minimal audio degradation.
Additional information 12 86 En the THX Surround EX playback mode, otherwise THX Select2 Cinema mode will apply ASA processing to provide optimum replay. • THX MusicMode For the replay of multi-channel music the THX MusicMode should be selected. In this mode THX ASA processing is applied to the surround channels of all 5.
Additional information 12 87 En Multichannel signal formats SBch Processing Input signal format Standard THX Auto Surround SBch Processing ON (7.1 channel decoding used for all sources) WMA9 Pro (6.1/7.1 channel) Straight decoding WMA+THX CINEMA Straight decoding Dolby Digital EX (6.
Additional information 12 88 En Stream direct with different input signal formats The following charts show what you will hear with different input signal formats, depending on the Stream Direct mode (see Using Stream Direct on page 29) you have selected.
Additional information 12 89 En Specifications Amplifier section Continuous average power output of 140 (or 130) watts* per channel, min., at 8 ohms, from 20 Hz to 20 000 Hz with no more than 0.09 %** total harmonic distortion (front). Continuous Power Output (20 Hz to 20 kHz, 8 Ω , 0.
Additional information 12 90 En Our philosophy Pioneer is dedicated to making your home theater listening experience as close as possible to the vision of the moviemakers and mastering engineer when they created the original soundtrack.
Additional information 12 91 En S001_En Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.
Ein wichtiger Punkt beim Kauf des Geräts Pioneer VSX-82TXS-S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pioneer VSX-82TXS-S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pioneer VSX-82TXS-S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pioneer VSX-82TXS-S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pioneer VSX-82TXS-S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pioneer VSX-82TXS-S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pioneer VSX-82TXS-S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pioneer VSX-82TXS-S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pioneer VSX-82TXS-S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
