Benutzeranleitung / Produktwartung VSX-522 des Produzenten Pioneer
Zur Seite of 39
VSX-522 -K AV Receiver Operating Instructions.
2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser vicing) instructions in the literature accompanying the appliance.
3 If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be per formed only by qualified ser vice personnel.
4 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Checking what’s in the box .
5 Before you start Checking what’s in the box Please check that you’ve received the following supplied accesso ries: • Setup microphone • Remote control • AAA size IEC R03 dry cell batteries.
1 1 6 Chapter Controls and displays Front panel 1 INPUT SELECTOR dial Selects an input source ( page 20 ). 2 MCACC indicator Lights when Acoustic Calibration EQ ( page 26 ) is on (Acoustic Calibration EQ is automatically set to on after the Auto MCACC setup ( page 18 )).
Controls and displays 1 1 7 13 SOUND RETRIEVER Press to restore CD quality sound to compre ssed audio sources ( page 26 ). 14 iPod iPhone USB terminal Use to connect your Apple iPo d or USB mass storage device as an audio source ( page 16 ). 15 MCACC SETUP MIC jack Use to connect a microphone when performing Auto MCACC setup ( page 18 ).
Controls and displays 1 1 8 Remote control As for operating other devices, the remote co ntrol codes for the Pioneer products are preset. The settings cannot be changed. 1 SLEEP Press to change the amo unt of time before the receiver switches into standby ( 30 min – 60 min – 90 min – Off ).
Controls and displays 1 1 9 11 Component control buttons The main buttons ( , , etc.) are used to control a component after you have selected it us ing the input function buttons. The controls above these buttons can be acces sed after you have selected the corresponding input function butt on ( BD , DVD and CD ).
2 2 10 Chapter Connecting your equipment Placing the speakers By connecting the left and right front speakers ( L / R ), the cen ter speaker ( C ), the left and right surround speakers ( SL / SR ), and the subwoofer ( SW ), a 5.1 ch surround system can be enjoyed.
Connecting your equipment 2 2 11 Connecting the speakers The receiver will work with just two stereo sp eakers (the front speakers in the diagram) but using at least three speakers is recommended, and a complete setup is be st for surround sound.
Connecting your equipment 2 2 12 Making cable connections Make sure not to bend the cables over the top of this unit (as shown in the illustration). If th is happens, the magnetic field produced by the trans formers in this unit may cause a humming noise from the speakers.
Connecting your equipment 2 2 13 Analog audio ca bles Use stereo RCA phono cables to connect analog audio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals.
Connecting your equipment 2 2 14 Connecting a TV and playback component s Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player, etc.), you can connect it to this receiver using a commercially available HDMI cable.
Connecting your equipment 2 2 15 Connecting your component with no HDMI terminal This diagram shows connections of a TV and DVD player (or other playback component) with no HDMI terminal to the receiver.
Connecting your equipment 2 2 16 Connecting antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and so und quality, connect external antennas (see Using external antennas below ). 1 Push open the tabs, then inse rt one wire fully into each terminal, then release the tabs to secure the AM antenna wires.
Connecting your equipment 2 2 17 • When the ARC function is ON and the rece iver is connected to a compatible TV with an HDMI cable, and you switch the input of the TV when the receiver’s selection is iPod/USB input, the receiver may automatically switch to TV .
3 3 18 Chapter Basic Setup Before s etting up This receiver allows you to adju st the system setup, using the on-screen display (OSD) that is show n on the TV screen. • The OSD will not appear if you have conne cted using the HDMI output to your TV.
Basic Setup 3 3 19 5 Select ‘Auto MCACC’ from the Home Menu, then press ENTER . • Mic In! blinks when the microphone is not connected to MCACC SETUP MIC jack. Try to be as quiet as possible after pressing ENTER . The system outputs a serie s of test tones to establish the ambient noise level.
4 4 20 Chapter Basic playback Playing a source Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system.
Basic playback 4 4 21 • When digital input (optical or coaxial) is selected, this receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and DTS (inclu ding DTS 96 kHz/24 bit) digital signal formats.
Basic playback 4 4 22 Playing an iPod This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod using the controls of this receiver.
Basic playback 4 4 23 Playing a USB device It is possible to listen to two-channel audio using the USB interface on the front of this receiver. Important • Pioneer cannot guarantee compatibility (op.
Basic playback 4 4 24 Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts using the au tomatic (sea rch) and manual (step) tuning functions. Once you are tune d to a station you can memorize the frequency for recall later—see Saving station presets below for more on how to do this.
5 5 25 Chapter Listening to your system Choosing the li stening mo de This receiver offers a vari ety of listening modes to accommodate playback of various audio formats. Choose one according to your speaker environment or the source. While listening to a source, press the listening mode button repeatedly to select a listening mode you want.
Listening to your syst em 5 5 26 b. You can als o adjust th e C.WIDTH , DIMEN . , and PNRM. effect (see Setting the Audio options on page 28 ). c. You can als o adjust th e H.GAIN effect (see Setting the Audio options on page 28 ). d. You can als o adjust th e C.
Listening to your syst em 5 5 27 Better sound us in g Phase Control This receiver’s Phase Control feature uses pha se correction measures to make sure your sound source arrives at the listening position in phase, preventing unwanted distortion and/or coloring of the sound.
Listening to your syst em 5 5 28 Setting the Audi o options There are a numbe r of additional sound se ttings you can make using the AUDIO PARAMETER menu.
Listening to your syst em 5 5 29 a. You can chan ge the MIDNIGHT/LOUDNESS option s at any time by using MIDNIGHT button. b. You can chang e the Sound Retr iever featur e at any time by using S.RETRIEVER button. c. The default setting wh en the iPod/USB input is selected is ON .
6 6 30 Chapter Home Menu Using the Home Menu The following section shows you how to make detailed settings to specify how you’re using the receiver, and also explains how to fine-tune individual spea ker system settings to your liking. Important • The OSD will not appear if you have conne cted using the HDMI output to your TV.
Home Menu 6 6 31 • Center – Select LARGE if your center speaker reproduces bass frequencies effectiv ely, or select SMALL to send bass frequencies to the other speakers or subwoofer. I f you didn’t connect a cen ter speaker, choose NO (the center channel is sent to the other speakers).
Home Menu 6 6 32 4 Confirm your selected setup option. The test tones will start after you pre ss ENTER . After the volume increases to the reference level, test tones will be output . 5 Adjust the level of each channel using / . If you sele cted Manu al , use / to switch sp eakers.
Home Menu 6 6 33 The Pre Out Setting Specify either using the surround back speaker or the front height speaker connection with the PRE OUT SURR BACK/ FRONT HEIGHT outputs. An additional amplifier is required for the speaker connection. • Default setting: Surr.
Home Menu 6 6 34 Before starting ARC operation When starting ARC operation, put the TV and this unit in STANDBY mode after connecting this unit with the TV.
7 7 35 Chapter Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is some thing wrong with this component, check the points below. Take a look at the other components and electric al appliances being used, because sometimes the pro blem ma y lie there.
Additional information 7 7 36 The front panel display switch es over for no apparent reason to various different displays. This happens becau se the demo display is in operation . T o turn off the demo display , press an y button to go back to the original display , or set the FL Demo Mode to OF F (see The FL Demo Mode menu on page 33 ).
Additional information 7 7 37 About iPod/iPhone “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPho ne, respectively, and has been certified by the developer to meet Ap ple performance standards.
Additional information 7 7 38 Specifications Audio Section FTC power output . . . . . . . . . . . . . . . . . . . . . . . . 65 W + 65 W (STEREO, 20 Hz to 20 kHz, 8 Ω , 0.2 %) Rated power output (Front, Center, Surround) . . . . . . . . . . . . . . . .
<ARB7468-A> © 2012 PIONEER CORPORA TION. All rights reser ved. PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanaga wa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P .O. BO X 1540, Long Beach, California 90801-1540, U.S .A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANAD A, INC.
Ein wichtiger Punkt beim Kauf des Geräts Pioneer VSX-522 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pioneer VSX-522 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pioneer VSX-522 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pioneer VSX-522 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pioneer VSX-522 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pioneer VSX-522 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pioneer VSX-522 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pioneer VSX-522. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pioneer VSX-522 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
