Benutzeranleitung / Produktwartung VSX-322-K des Produzenten Pioneer
Zur Seite of 31
AV Receiver Operating Instructions Discov er the benefits of registering your product online at http://www .pioneer .co.uk (or http://www .pioneer .eu ).
2 En The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3 En If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified ser vice personnel.
4 En Thank you for buying this Pioneer product. Please read through these operating instruct ions so you will know how to o perat e you r model properly. After you have finished reading the inst ructions, put them away in a sa fe place for future reference.
5 En Before you start Checking what’s in the box Please check that you’ve received the following supplied accessories: • Remote control • AAA size IEC R03 dry cell batteries (to confirm system.
01 01 Controls and displays 6 En Chapter 1: Controls and displays Front pane l 1 INPUT SELECTOR dial Selects an input source (page 17). 2 Receiver control buttons SPEAKERS – Use to change the speaker system on or off. When the SP OFF is selected, no sound is output from the speakers connected to this receiver.
01 01 Controls and displays 7 En 11 SOUND RETRIEVER Press to restore CD quality so und to compressed audio sources (page 22). Display 12 PHASE Lights when the Phase Control is switched on (page 22). 13 AUTO Lights when the Auto Surround feature is switched on (page 21).
01 01 Controls and displays 8 En Remote control As for operating other devices, the remot e control codes for the Pioneer products are pres et. The settings cannot be chang ed. 1 SLEEP Press to change the amount of time before the receiver switches into standby ( 30 min – 60 min – 90 min – Off ).
01 01 Controls and displays 9 En Press first to access: BASS –/+ , TRE –/+ – Use to adjust Bass or Treble. • These controls are disabled when the listening mode is set to DIRECT or PURE DIRECT . • When the front speaker is set at SMALL in the Speaker Setting and the X.
02 02 Connecting your equipment 10 En Chapter 2: Connecting your equipment Placing the speakers By connecting the left an d right front speakers ( L / R ), the center sp eaker ( C ), the left and right surround speake rs ( SL / SR ), and the subwoo fer ( SW ), a 5.
02 02 Connecting your equipment 11 En Connecting the speakers The receiver will work with just two stereo sp eakers (the front speakers in the diagram) but using at least three speakers is recommended, and a complete setup is best for surround sound.
02 02 Connecting your equipment 12 En Making cable connections Make sure not to bend the cables over the top of this unit. If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers.
02 02 Connecting your equipment 13 En Analog audio cables Use stereo RCA phono cables to connect analog a udio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals.
02 02 Connecting your equipment 14 En Connecting a TV and playback components Connecting using HDMI If you have an HDMI or DVI (with HDCP) equippe d component (Blu-ray Disc player, etc.), you can connect it to this receiver usin g a commercially available HDMI cable.
02 02 Connecting your equipment 15 En Connecting a satellite receiver or other digital set-top box Satellite and cable receivers, and terrestrial digital TV tuners are all examples of so-c alled ‘set-top boxes’. • If the set- top box or video component also h as an HDMI output, you can connect this too.
02 02 Connecting your equipment 16 En Using external antennas To improve FM reception Use a PAL connector (not supplied) to connect an external FM antenna. To improve AM reception Connect a 5 m to 6 m length of vinyl-coated wire to the AM antenna terminal without disconnecting the supplied AM loop antenna.
Basic playback 17 En 03 03 Chapter 3: Basic playback Canceling the demo display The display on the front panel shows various information (demo displays) when the receiver is not operating. You can turn off the demo display. For details, see The FL Demo Mode menu on page 26.
Basic playback 18 En 03 03 • When digital input (optical or coaxial) is select ed, this receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and DTS (including DTS 96 kHz/24 bit) digital signal formats.
Basic playback 19 En 03 03 Saving station presets If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. This saves the effort of manually tuning in each time.
Basic playback 20 En 03 03 Searching for RDS programs You can search for a program type listed above. 1 Press TUNER then press BAND to select the FM band. • RDS is only possible in the FM band. 2 Press PTY SEARCH. SEARCH shows in the display. 3 Press PRESET / to select the program type you want to hear.
Listening to your system 21 En 04 04 Chapter 4: Listening to your system Choosing the listening mode This receiver off ers a vari ety of listening modes to accommodate playback of vario us audio formats. Choose one according to your speaker environment or th e source.
Listening to your system 22 En 04 04 Using the Advanced surroun d The Advanced surround feature creates a variety of surround effects. Try different modes wi th various soundtracks to see which you like. Using Stream Di rect Use the Stream Direct modes when you want to hear the truest possible reproduction of a source.
Listening to your system 23 En 04 04 Using surround back channel processing You can have the receiver automatically use 6.1 or 7.1 decoding for 6.1 encoded source s (for example, Dolby Digital EX or DTS-ES), or you can choo se to always us e 6.1 or 7.
Listening to your system 24 En 04 04 a. You can change th e MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button. b. You can change the Sound Ret riever feature a t any time by using S.RETRIEVER button. c. This setting works only with du al mono encoded Dolby Digita l and DTS soundtracks.
The System Setup menu 25 En 05 05 Chapter 5: The System Setup menu Using the System Setup menu The following section show s you how to make detailed settings to specify how you’re using th e receiver, and also explains how to fine-tune individual speaker system settings to your liking.
The System Setup menu 26 En 05 05 X.Over • Default setting: 100Hz This setting decides the cutoff between bass sounds playing back from the speakers selected as LARGE , o r the subwoofer, and bass sounds playing back from those selected as SMALL . It also decides where th e cutoff will be for bass sounds in the LFE channel.
ARC (Audio Return Channel) function 27 En 06 06 Chapter 6: ARC (Audio Return Channel) function If your TV supports an audio return channel function, connect your TV and this unit with an HDMI cable and the TV audio will be inputted into this unit via the HDMI terminal without the need for an audio cable to be connected.
Additional information 28 En 07 07 Chapter 7: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions.
Additional information 29 En 07 07 HDMI No picture or sound. If the problem still persists when connecting your HDMI component directly to your monitor , please con sult the component or monitor ma nual or contact the manufactu rer for support. No picture.
Additional information 30 En 07 07 Specifications Audio section Rated power output Front, Center, Surround . . . . . . . . . . . . . . . . . 100 W per channel (1 kHz, 6 Ω , 0.7 %) Total Harmonic Distortion . . . . . . . . . . . . . . . . 0.06 % (20 Hz to 20 kHz, 8 Ω , 50 W/ch) Frequency response (LINE Pure Direct mode) .
<ARB7494-A> © 2012 PIONEER CORPORA TION. All rights reser ved. http://www .pioneer .co.uk http://www .pioneer .eu PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanagaw a 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P .O . BOX 1540, Long Beach, Calif ornia 90801-1540, U.
Ein wichtiger Punkt beim Kauf des Geräts Pioneer VSX-322-K (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pioneer VSX-322-K noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pioneer VSX-322-K - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pioneer VSX-322-K reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pioneer VSX-322-K erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pioneer VSX-322-K besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pioneer VSX-322-K verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pioneer VSX-322-K. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pioneer VSX-322-K gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
