Benutzeranleitung / Produktwartung SH-DT510 des Produzenten Pioneer
Zur Seite of 38
1 Operating instructions Digital High Definition T uner SH-DT510.
2 Safety Fir st VENTILA TION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 8 cm at top, 5 cm at rear , and 5 cm at each side).
3 ST ANDBY/ON Button ST ANDBY : When set to the ST ANDBY position, the main power flow is cut and the unit is no longer fully operational. A minute flow of power feeds the unit to maintain operation readiness. ST ANDBY Indicator The red indicator is lit when the unit is in the standby mode.
4 T ABLE OF CONTENTS Safety First .............................................................................. 2 Chapter 1: Intr oduction ......................................................... 6 Summary of Features ...............................
5 General Setting ............................................................................... 20 TIME SETUP ...................................................................................................... 2 0 A UDIO SETUP ...................
6 Chapter 1: Intr oduction Digital High Definition T uner's Functions The SH-DT510 digital High Definition tuner opens up a ne w world of free-to- air terrestrial programming. This tuner can receive channels from VHF/UHF band TV station's digital signals.
7 System Menus All the tuner's f eatures can be accessed through the system menus. These menus can be accessed with simple point and clic k actions, using the navigation and select b uttons on the RCU. The men us include items such as T ransmission P arameter Configuration, Channel List, A udio Options, and P arental Loc k.
8 Menu T ree Note: Y ou need to enter a " P assw ord " to access some of the functionality in the menu. P ass word is initially set to "0000".
9 Chapter 2: Installation Introduction If y our ser vice provider or system installer has already set up the antenna and connected the tuner , then you can star t the operations specified in Chapter 4.
10 Functions Of RCU Buttons The b uttons on the remote control are described as follows: • ST ANDBY/ON: Switches the tuner between ON and ST ANDBY modes. • Numeric Buttons: For entering channel number or pass word. • INFO: Displays i-Plate pro viding inf or mation about the current channel.
11 Front P anel The buttons and indicators on the F ront Panel of y our SH-DT510 are described in the follo wing picture and table: Rear P anel The rear panel carries connectors for attaching VHF/UHF antenna and other home enter tainment equipment.
12 T erminals S-Video Out Data P or t RF In Composite Video Out A udio Out (L, R) RF Out A C IN Digital A udio Out (Optical and Coaxial) Component Out (Y/Pb/Pr) HDMI Out Description Connects to the S-Video input on your TV or VCR. F or ser vice use only .
13 Sample Configurations HDMI Connection High Definition TV(Y/Pb/Pr) Connection SERVICE ONL Y AUD IO O UT L R OPTICAL Y P B P R COAXIAL HDMI OUT VIDEO OUT COMPONENT VIDEO S- VIDEO VIDEO RF IN RF OUT A.
14 S-Video Connection Note: Connecting video through S-Video , OSD can not wor k under 1080i / 720p and 576p modes. Please connect your TV to Y/Pb/Pr or HDMI output f or OSD properly displaying under 1080i / 720p & 576p modes .
15 Antenna Loop Connection Using RF Output to connect with VCR or Secondary TV SERVICE ONL Y AUD IO O UT L R OPTICAL Y P B P R COAXIAL HDMI OUT VIDEO OUT COMPONENT VIDEO S- VIDEO VIDEO RF IN RF OUT AN.
16 Chapter 3: Channel Setting Introduction After finishing the hardw are installation as descr ibed in Chapter 2, s witch on the tuner . It will displa y Data base is Empty and instruct you to press the "MENU" button on the remote control. The f ollowing menu will be displa yed after pressing the "MENU" b utton.
17 INST ALLA TION • INST ALLA TION MENU gives 4 different sub-menu. QUICK SCAN A UTO SCAN MANU AL SCAN CLEAR ALL D A T A QUICK SCAN If y ou live in one of the cities or regions listed in the Q UICK SCAN menu, select your city or region and start scanning all digital TV channel signals .
18 A UT O SCAN A uto Scan searches f or digital programs on all channels , 5 to 69, through the VHF and UHF bands. • Select A UTO SCAN and pr ess "ENTER" button. • Select YES then press "ENTER" button to start channel sear ch. • The tuner starts scanning fr om channel 5 to channel 69.
19 MANU AL SCAN Manual Scan search the channel based on user request frequency and bandwidth. • On the Installation page, select MANU AL SCAN and press "ENTER" button. • Select channel number . Be sure you know the channel number and its RF frequency .
20 General Setting • Selecting SET UP will display this sub-menu. TIME SETUP A UDIO SETUP i - PLA TE SETUP SOFTW ARE TIME SETUP • TIME SETUP sets the time in "TIME ZONE". Use the " "and " " buttons to select the local time zone you ar e located in and press the "ENTER" button.
21 i - PLA TE SETUP • On selecting this option from the abo ve menu, you can change the i-PLA TE display time and f ormat..
22 SOFTW ARE • When you select the SOFTW ARE menu, there ar e two sub-menus displayed: CURRENT VERSION INST ALL NEW S/W INST ALL NEW S/W • Service use only CURRENT VERSION • Under the CURRENT VERSION sub- menu, the ID number of installed hardwar e and software versions of the tuner are display ed.
23 Chapter 4: Using the T uner Introduction Once the channels are downloaded, y ou can start enjoying the full range of video and audio progr ams. Operating the tuner is e xtremely easy . Y ou can control the show tuner directly from the F ront P anel or with the RCU as described below .
24 Selecting F av orite Channels • Under the "CH SETUP" sub-menu, you can select "SELECT F A V ORITE" to set up fa vorite channels. • Use " " and " " b uttons to select the channel, use " " and " " buttons to select "F A V .
25 P ARENT AL GUID ANCE • Under CH SETUP sub-menu, you can select P ARENT AL GUID ANCE to block pro grams. • Use " " and " " buttons to select the Rating, press "ENTER" b utton to confirm the setting .
26 i-PLA TE (INFORMA TION PLA TE) • While watching DTV you can press the "INFO" button to acti vate extended program inf ormation. • The i-PLA TE will pop up with the follo wing informat.
27 TELETEXT / Closed Caption • When the i-PLA TE indicated that T eletext / Closed Caption data is av ailable on the current channel, y ou can press the " TTX " button on the remote contr ol to display it on the TV screen. • 4 Colour buttons ar e assigned f or TTX.
28 SLEEP When the selected time elapses, the Sleep Timer automatically places the system into the standb y mode. Press "SLEEP" button to select the desired time . • The timer starts counting. • T o cancel the Sleep T imer , select "OFF" by pressing "SLEEP" b utton.
29 Appendix A: Interference with The HDTV T uner W eather Induced Signal Fading Natural calamities ma y aff ect signal reception. If the terrestrial TV programming is often aff ected by inclement w eather conditions, there are a f ew basic steps y ou can take to impro v e reception: 1.
30 Appendix B: T roub leshooting If you encounter an y problems with the tuner , look through this section f or a description of y our problem. T r y solving the prob lem by f ollowing the giv en solutions.
31 Prob lem (5) No video service. (6) Does not hav e all the channels av ailable after activ ating “ A UTO SCAN” when first time installing the recei ver . (7) Does not hav e all the channels av ailable after using “QUICK SCAN”. (8) Cannot lock signal by using “MANU AL SCAN”.
32 Appendix C: DTV CHANNEL T ABLE The f ollowing is a list of D VT channels availab le in Australia. First, into "MANU AL SETUP" Second, select the VHF channel number , then use a middle frequency to star t search.
33 City Canberra Darwin Newcastle W ollong ong Hobart Hobart NE Identifier CTC -7 ABC -9 WIN -31 CBN -34 SBS -28 SBS -28 ABD -6 NTD -8 TND -34 NBN -3 NEN -54 NRN -57 ABHN -5A/ 4B SBS -45 WIN -59 CTC -.
34 Appendix D: Specifications Standar ds Compliance Compliant Standard D VB-T , MPEG-2 RF Input/Output Frequency Australian Allocation ; VHF(104.5 ~ 226.
35 Front P anel Function Control 7 Buttons Channel Display 4 Digits / 7-segment display Remote Contr ol Buttons 35 Buttons including Standby , CH+, CH–....etc P o wer Supply Input V oltage 240V ~ 50 Hz Power Consumption 18W (3W standby) Dimension Size (W × D × H) 360 × 268 × 80 mm W eight 3.
36 Glossary * Aspect Ratio : It is the ratio of the width of the screen to the height. The two relev ant digital TV f or mats are 16:9 (widescreen) or 4:3 (the traditional screen ratio). 16:9 is more ergonomically suitable f or the human eye . * Bandwidth : Frequency range allo ws f or carrying a cer tain radio signal.
37 * Megahertz (MHz) : Millions of cycles per second, which describes frequencies of radio wa ve or electric current. * OSD : Abbreviation of "On Screen Displa y", used in digital set top box. OSD is comprised of a main menu and many submenu with lots of options of functions inside.
Published by Pioneer Corporation. Copyright © 2005 Pioneer Corporation. All rights reserved. Printed in Taiwan <IB07070099> PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.
Ein wichtiger Punkt beim Kauf des Geräts Pioneer SH-DT510 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pioneer SH-DT510 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pioneer SH-DT510 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pioneer SH-DT510 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pioneer SH-DT510 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pioneer SH-DT510 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pioneer SH-DT510 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pioneer SH-DT510. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pioneer SH-DT510 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
