Benutzeranleitung / Produktwartung SC-2022 des Produzenten Pioneer
Zur Seite of 123
Operating Instructions AV Receiv er SC - 65.
2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3 IMPORT ANT NOTICE THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT ARE ON THE REAR OR BOT TOM. RECORD THESE NUMBERS ON YO UR ENC LO SED WA RRANTY CARD AND KEEP IN A SAFE PL ACE FOR FUTURE REFERENCE.
4 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Contents 01 Before you start Checking what’s in the box ..............................................
5 10 Controlling the rest of your system About the Remote Setup menu ....................................................................................................................................... 79 Operating multiple receivers ..............
6 Flow of settings on the receiver Flow for connecting and setting the receiver The unit is a full-fledged AV receiver equipped with an abundance of functions and terminals. It can be used eas - ily after following the procedure below to make the connections and settings.
7 Checking what’s in the box ............................................................................................................ 8 Our philosophy ..............................................................................
8 01 Before you start Checking what’s in the box Please check that you’ve received the following supplied accessories: ! Setup microphone (cable: 5 m (16.
9 01 Before you start % Bluetooth compatible Using the Bluetooth ADAPTER (AS-BT100 or AS-BT200) lets you enjoy music files on an iPhone or other Bluetooth wireless technology device wirelessly.
10 01 Before you start Operating range of remote control unit The remote control may not work properly if: ! There are obstacles between the remote control and the receiver’s remote sensor. ! Direct sunlight or fluorescent light is shining onto the remote sensor.
11 Remote control .............................................................................................................................. 12 Display ...............................................................................
12 02 Controls and displays Remote control This section explains how to operate the remote control for the receiver. RECEIVE R D. AC CESS CH LEVEL DIMMER HDMI OUT SLEEP SIGNAL SEL MCACC AU T O/ALC/ DIRECT TH X AU TO S.RTR V ST ANDARD ADV SURR SPEAKER S D.
13 02 Controls and displays 10 MULTI-ZONE select buttons Switch to perform operations in ZONE 2 and ZONE 3 ( page 75 ). 11 Remote control LED Lights when a command is sent from the remote control. 12 Switches the remote to control the receiver (used to select the white commands).
14 02 Controls and displays Display HDMI DIGIT AL ANALOG L C R SL SR XL XR XC LFE AUTO DIGIT AL PL US AU TO SURROUND STREAM DIRECT PROL OGI C x Neo: 6 THX AD V .
15 02 Controls and displays Front panel MASTER VOLUME STANDBY /O N INPUT SELECTOR iPod iPhone iPad HDMI ADVANCE D MCAC C FL OFF PHONES SPEAKERS MULTI-ZONE CONTROL ON/OFF MCACC SETUP MI.
16 02 Controls and displays 20 iPod iPhone iPad USB terminals Use to connect your Apple iPod/iPhone/iPad as an audio and video source ( page 37 ), or connect a USB device for audio and photo playback ( page 38 ). 21 HDMI input/MHL connector Use for connection to a compatible HDMI device (Video camera, etc.
17 Connecting your equipment ......................................................................................................... 18 Rear panel ......................................................................................
18 03 Connecting your equipment Connecting your equipment This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This chapter explains the kinds of components you can connect to make up your home theater system.
19 03 Connecting your equipment Determining the speakers’ application This unit is equipped with speaker terminals for 11 channels, allowing users to select a variety of speaker layouts/ usage patterns according to their tastes.
20 03 Connecting your equipment [D] 7.2 channel surround system (Surround back) & ZONE 2 connection (Multi Zone) ! Speaker System setting: 7.1ch + ZONE 2 With these connections you can simultaneously enjoy 7.2-channel surround sound in the main zone with stereo playback on another component in ZONE 2.
21 03 Connecting your equipment Placing the speakers Refer to the chart below for placement of the speakers you intend to connect. L SW 2S W 1 C FHL FWL SL SBL SBR SB SR FWR R FHR 30 30 60 60 60 120 120 ! Place the surround speakers at 120º from the center.
22 03 Connecting your equipment Connecting the speakers Each speaker connection on the receiver comprises a positive (+) and negative (–) terminal. Make sure to match these up with the terminals on the speakers themselves. This unit supports speakers with a nominal impedance of 4 W to 16 W .
23 03 Connecting your equipment Bi-wiring your speakers Your speakers can also be bi-wired if they support bi-amping. ! With these connections, the Speaker System setting makes no difference. CAUTION ! Don’t connect different speakers from the same terminal in this way.
24 03 Connecting your equipment [B] 7.2 channel surround system & Speaker B connection ! Select ‘ 7.1ch + Speaker B ’ from the Speaker System menu. See Speaker system setting on page 93 to do this. ! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals.
25 03 Connecting your equipment [D] 7.2 channel surround system (Surround back) & ZONE 2 connection (Multi Zone) ! Select ‘ 7.1ch + ZONE 2 ’ from the Speaker System menu. See Speaker system setting on page 93 to do this. ! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals.
26 03 Connecting your equipment [F] 5.2 channel surround system & Front Bi-amping connection (High quality surround) & ZONE 2 connection (Multi Zone) ! Select ‘ 5.1ch Bi-Amp + ZONE 2 ’ from the Speaker System menu. See Speaker system setting on page 93 to do this.
27 03 Connecting your equipment About the audio connection Transferable audio signals Sound signal priority HDMI HD audio Digital (Coaxial )C onventional digital audio RCA (Analog) ( W.
28 03 Connecting your equipment About HDMI The HDMI connection transfers uncompressed digital video, as well as almost every kind of digital audio. This receiver incorporates High-Definition Multimedia Interface (HDMI ® ) technology. This receiver supports the functions described below through HDMI connections.
29 03 Connecting your equipment ! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables.
30 03 Connecting your equipment Connecting your TV with no HDMI input This diagram shows connections of a TV (with no HDMI input) and DVD player (or other playback component) to the receiver. Important ! With these connections, the picture is not output to the TV even if the DVD player is connected with an HDMI cable.
31 03 Connecting your equipment Connecting an HDD/DVD recorder, BD recorder and other video sources This receiver has audio/video inputs suitable for connecting analog or digital video devices, including HDD/DVD recorders and BD recorders.
32 03 Connecting your equipment Connecting a satellite/cable receiver or other set-top box Satellite and cable receivers, and terrestrial digital TV tuners are all examples of so-called ‘set-top boxes’.
33 03 Connecting your equipment Connecting other audio components This receiver has both digital and analog inputs, allowing you to connect audio components for playback. When you set up the receiver you’ll need to tell the receiver which input you connected the component to (see also The Input Setup menu on page 44 ).
34 03 Connecting your equipment Connecting AM/FM antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Connecting external antennas on page 34 ).
35 03 Connecting your equipment MULTI-ZONE setup This receiver can power up to three independent systems in separate rooms after you have made the proper MULTI-ZONE connections. Different sources can be playing in three zones at the same time or, depending on your needs, the same source can also be used.
36 03 Connecting your equipment To use the surround back speaker terminals for ZONE 2: R Sub zone ( ZONE 2 ) Main zone VIDEO IN (Single ) S URR O UND BA CK RL ZONE 2 OUT (Single) SURROUND BACK RL ZONE 2 OUT L A A 2 1 Secondary MULTI-ZONE setup (ZONE 3) % Connect a separate amplifier to the AUDIO ZONE 3 OUT jacks on this receiver.
37 03 Connecting your equipment Connecting to the network through LAN interface By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
38 03 Connecting your equipment Tip ! An iPod/iPhone/iPad can be connected to the receiver. For details on supported models and versions of the respective products, see Playing an iPod on page 48 .
39 03 Connecting your equipment Connecting to a wireless LAN Wireless connection to the network is possible through a wireless LAN connection. Use the separately sold AS-WL300 for connection. ! Use only the furnished accessory connecting cable.
40 03 Connecting your equipment Plugging in the receiver Only plug in after you have connected all your components to this receiver, including the speakers.
41 Changing the OSD display language (OSD Language) ............................................................... 42 Automatically conducting optimum sound tuning (Full Auto MCACC) .................................... 42 The Input Setup menu .
42 04 Basic Setup Changing the OSD display language (OSD Language) The language used on the Graphical User Interface screen can be changed. ! The explanations in these operating instructions are for when English is selected for the GUI screen.
43 04 Basic Setup Install the microphone on a stable floor. Placing the microphone on any of the following surfaces may make accurate measurement impossible: ! Sofas or other soft surfaces. ! High places such as tabletops and sofa tops.
44 04 Basic Setup The Input Setup menu You only need to make settings in the Input Setup menu if you didn’t hook up your digital equipment according to the default settings (see Input function default and possible settings on page 44 ).
45 04 Basic Setup Operation Mode Setup This receiver is equipped with a great number of functions and settings. The Operation Mode feature is provided for users who find it difficult to master all these functions and settings. One of two settings can be selected for the Operation Mode : Expert and Basic .
46 Playing a source ............................................................................................................................. 47 Playing an iPod ......................................................................
47 05 Basic playback Playing a source Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system. INPUT SELECT iPod USB CBL SA TM HL TUNE R ADPT CD TV RECEIVER BDR BD DV DD VR NET HDMI VO LUME RECEIVE R AU TO /ALC / DIRECT RECEIVER 1 1 Switch on your system components and receiver.
48 05 Basic playback Playing an iPod This receiver has the iPod iPhone iPad USB terminal that will allow you to control playback of audio content from your iPod using the controls of this receiver. Here we describe the procedure for playback on an iPod.
49 05 Basic playback Playing a USB device It is possible to play files using the USB interface on the front of this receiver. ! Compatible USB devices include external magnetic hard drives, portable flash memory drives (particularly key drives) and digital audio players (MP3 players) of format FAT16/32.
50 05 Basic playback About playable file formats The USB function of this receiver supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats. Music files Category Extension Stream MP3 <a> .
51 05 Basic playback Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a station below.
52 05 Basic playback Bluetooth ADAPTER for Wireless Enjoyment of Music This receiver Re mote control operation Music data Bluetooth ® ADAPTER Bluetooth wireless technology enabled dev.
53 05 Basic playback Listening to music contents of a Bluetooth wireless technology device with your system 1 Press ADPT on the remote control to switch the receiver to ADAPTER PORT input. ! The AD APTER PORT input can also be selected by pressing SOUND RETRIEVER AIR on the receiver.
54 Enjoying various types of playback using the listening modes ................................................ 55 Selecting MCACC presets ...............................................................................................
55 06 Listening to your system Enjoying various types of playback using the listening modes Using this receiver, you can listen to any source in surround sound. However, the options available will depend on your speaker setup and the type of source you’re listening to.
56 06 Listening to your system Using the Home THX modes THX and Home THX are technical standards created by THX Ltd. for cinema and home theater sound. Home THX is designed to make home theater audio sound more like what you hear in a cinema.
57 06 Listening to your system Using Stream Direct Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unneces - sary signal processing is bypassed, and you’re left with the pure analog or digital sound source.
58 06 Listening to your system Better sound using Phase Control This receiver’s Phase Control feature uses phase correction measures to make sure your sound source arrives at the listening position in phase, preventing unwanted distortion and/or coloring of the sound.
59 Introduction ................................................................................................................................... 60 Playback with Network functions ....................................................
60 07 Playback with NETWORK features Introduction This receiver is equipped with the LAN terminal and you can enjoy the following features by connecting your components to these terminals.
61 07 Playback with NETWORK features Playback with Network functions Important ! About one minute is required between turning the power on and completion of startup. ! When you play back audio files, ‘ Connecting... ’ is displayed before playback starts.
62 07 Playback with NETWORK features 4 Access the special Pioneer Internet radio site from your computer and perform the registration process. http://www.radio-pioneer.com Access the above site and use the access code in step 3 to perform user registration, following the instructions on the screen.
63 07 Playback with NETWORK features The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability Guidelines.
64 07 Playback with NETWORK features About playable file formats The NETWORK feature of this receiver supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats.
65 About the Control with HDMI function ....................................................................................... 66 Making Control with HDMI connections ...................................................................
66 08 Control with HDMI function About the Control with HDMI function Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are pos - sible when the component is connected to the receiver using an HDMI cable.
67 08 Control with HDMI function Before using synchronization Once you have finished all connections and settings, you must: 1 Put all components into standby mode. 2 Turn the power on for all components, with the power for the TV being turned on last.
68 08 Control with HDMI function Cautions on the Control with HDMI function ! Connect the TV directly to this receiver. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.
69 Setting the Audio options ............................................................................................................ 70 Setting the Video options ....................................................................
70 09 Using other functions Setting the Audio options There are a number of additional sound settings you can make using the AUDIO PARAMETER menu.
71 09 Using other functions Setting What it does Option(s) LFE (LFE Attenuate) Some audio sources include ultra-low bass tones. Set the LFE attenu - ator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers.
72 09 Using other functions k ! You can’t use the Virtual Height mode when the headphones are connected to this receiver or when any of the stereo, Front Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.
73 09 Using other functions Setting What it does Option(s) V.ADJ (Advanced Video Adjust) Sets the optimum picture quality for the type of monitor that is con - nected. Select PDP for plasma displays, LCD for liquid crystal moni - tors, FPJ for front projectors, PRO for professional monitors.
74 09 Using other functions Setting What it does Option(s) ASP (Aspect) <g> Specifies the aspect ratio when input signals are output at the HDMI output. Make your desired settings while checking each setting on your display (if the image doesn’t match your monitor type, cropping or black bands appear).
75 09 Using other functions Using the MULTI-ZONE controls The following steps use the front panel controls to adjust the sub zone volume and select sources. See MULTI- ZONE remote controls on page 75 . 1 Press MULTI-ZONE ON/OFF on the front panel.
76 09 Using other functions Using the sleep timer The sleep timer switches the receiver into standby after a specified amount of time so you can fall asleep without worrying about the receiver being left on all night. Use the remote control to set the sleep timer.
77 09 Using other functions Setting Default Mute Level FULL Phase Control ON Auto Sound Retriever iPod/USB, INTERNET RADIO, SiriusXM, PANDORA, MEDIA SERVER, FAVORITES, ADAPTER PORT input function ON Other input functions OFF Sound Delay 0.
78 About the Remote Setup menu .................................................................................................... 79 Operating multiple receivers .......................................................................
79 10 Controlling the rest of your system About the Remote Setup menu The Remote Setup mode is set by pressing the number button while pressing RCU SETUP . The different items on the Remote Setup menu are described below. For their setting procedures, refer to the explanations for the respective items.
80 10 Controlling the rest of your system 4 Repeat steps 2 through 3 for the other components you want to control. To try out the remote control, switch the component on or off (into standby) by pressing u SOURCE . If it doesn’t seem to work, select the next code from the list (if there is one).
81 10 Controlling the rest of your system Direct function ! Default setting: On You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component.
82 10 Controlling the rest of your system Controlling components This remote control can control components after entering the proper codes (see Setting the remote to control other components on page 79 for more on this). Use the input function buttons to select the component.
83 10 Controlling the rest of your system Audio/Video components Button(s) LD CD/CD-R/SACD MD/DAT TAPE u SOURCE POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF Number buttons numer.
84 Making receiver settings from the Advanced MCACC menu .................................................... 85 Automatic MCACC (Expert) .................................................................................................
85 11 The Advanced MCACC menu Making receiver settings from the Advanced MCACC menu The Advanced MCACC (Multi Channel ACoustic Calibration) system was developed in Pioneer’s laboratories with the aim of making it possible for home users to perform adjustments of the same level as in a studio easily and with high precision.
86 11 The Advanced MCACC menu PHONES SPEAKERS MU LT I- ZO NE CO NTROL ON/OFF MCACC SETUP MIC TUNER EDIT USB iPod iPhone iPad AUTO SURR/A LC / STREAM DIREC T ST ANDAR D SURROUND AD VA NCED SURROUND iP od iPhone iP ad DIRECT CONTRO L BAND 5V 2.
87 11 The Advanced MCACC menu Manual MCACC setup You can use the settings in the Manual MCACC setup menu to make detailed adjustments when you’re more familiar with the system. Before making these settings, you should have already completed Automatically con - ducting optimum sound tuning (Full Auto MCACC) on page 42 .
88 11 The Advanced MCACC menu Standing Wave ! Default setting: ON / ATT 0.0dB (all filters) Acoustic standing waves occur when, under certain conditions, sound waves from your speaker system resonate mutually with sound waves reflected off the walls in your listening area.
89 11 The Advanced MCACC menu 3 If you selected ‘Reverb Measurement’, select EQ ON or EQ OFF, and then START. The following options determine how the reverb characteristics of your.
90 11 The Advanced MCACC menu Speaker Distance Use this to display the distance from the different channels to the listening position. See Speaker Distance on page 94 for more on this. 1 Select ‘Speaker Distance’ from the MCACC Data Check menu.
91 11 The Advanced MCACC menu 4 Select ‘OK’ to confirm and copy the settings. When MCACC Memory Copy? is displayed, select YES . If NO is selected, the memory is not copied. Completed! shows in the GUI screen to confirm the MCACC preset has been copied, then you automatically return to the Data Management setup menu.
92 Making receiver settings from the System Setup menu ............................................................ 93 Manual speaker setup ...............................................................................................
93 12 The System Setup and Other Setup menus Making receiver settings from the System Setup menu The following section describes how to change the speaker-related settings manually and make various other settings (input selection, OSD language selection, etc.
94 12 The System Setup and Other Setup menus 2 Choose the set of speakers that you want to set, then select a speaker size. Use k / l to select the size (and number) of each of the following speakers: ! Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a subwoofer.
95 12 The System Setup and Other Setup menus 2 Choose the X-Curve setting you want. Use k / l to adjust the setting. The X-Curve is expressed as a downwards slope in decibels per octave, starting at 2 kHz. The sound becomes less bright as the slope increases (to a maximum of –3.
96 12 The System Setup and Other Setup menus Proxy Hostname / Proxy Port This setting is required when you connect this receiver to the Internet via a proxy server. Enter the IP address of your proxy server in the ‘ Proxy Hostname ’ field.
97 12 The System Setup and Other Setup menus The Other Setup menu The Other Setup menu is where you can make customized settings to reflect how you are using the receiver. 1 Press on the remote control, then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV.
98 12 The System Setup and Other Setup menus ! If an update file is provided on the Pioneer website, download it onto your computer. When downloading an update file from the Pioneer website onto your computer, the file will be in ZIP format.
99 12 The System Setup and Other Setup menus The low frequency component output from the AUDIO ZONE 2 OUT terminals is cut. When a subwoofer is con - nected in Zone 2, we recommend setting this to “ ON ”. This is only valid when Zone 2 is connected using the AUDIO ZONE 2 OUT terminals.
100 Troubleshooting .......................................................................................................................... 101 Power ..................................................................................
101 13 FAQ Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
102 13 FAQ Symptom Remedy No sound from subwoofer. Check that the subwoofer is connected properly, switched on and the volume turned up. If your subwoofer has a sleep function, make sure it is switched off. Make sure that the Subwoofer setting is YES or PLUS (see Speaker Setting on page 93 ).
103 13 FAQ ADAPTER PORT terminal Symptom Remedy The Bluetooth wireless technology device cannot be connected or oper - ated. Sound from the Bluetooth wire - less technology device is not emitted or the sound is interrupted. Check that no object that emits electromagnetic waves in the 2.
104 13 FAQ Symptom Remedy The various system settings are not stored. Do not pull out the power cord while conducting the settings. (The settings will be stored when both the main zone and sub zone turn off. Turn off all zones before pulling out the power cord.
105 13 FAQ Symptom Remedy No picture or sound. This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-compatible.
106 13 FAQ USB interface Symptoms Causes Remedies The folders/files stored on a USB memory device are not displayed. The folders/files are currently stored in a region other than the FAT (File Allocation Table) region. Store the folders/files in the FAT region.
107 13 FAQ Symptoms Causes Remedies Audio playback is undesir - ably stopped or disturbed. The audio file currently being played back was not recorded in a format playable on this receiver. Check whether the audio file was recorded in a format sup - ported by this receiver.
108 13 FAQ Wireless LAN Network cannot be accessed via wireless LAN. Wireless LAN converter’s power is not on. (Wireless LAN converter’s “Power”, “WPS” and “Wireless” indica - tors are not all lit.
109 Surround sound formats ............................................................................................................. 110 About THX ....................................................................................
110 14 Additional information Surround sound formats Below is a brief description of the main surround sound formats you’ll find on BDs, DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. Dolby The Dolby technologies are explained below.
111 14 Additional information THX Select2 Plus Before any home theatre component can be THX Select2 Plus certified, it must incorporate all the features above and also pass a rigorous series of quality and performance tests.
112 14 Additional information THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO.
113 14 Additional information Speaker Setting Guide In order to achieve an even better surround effect, it is important to accurately position the speakers and make their volume and tone characteristics uniform so as to finely focus the multi-channel sound.
114 14 Additional information About messages displayed when using network functions Refer to the following information when you come up with a status message while operating the Network functions. Status messages Descriptions Connection Down The selected category or Internet radio station cannot be accessed.
115 14 Additional information Glossary Audio formats/Decoding Dolby The Dolby technologies are explained below. See http://www.dolby.com for more detailed information. Dolby Digital Dolby Digital is a multichannel digital audio coding system widely used in cinemas, and in the home for DVD and digital broadcast soundtracks.
116 14 Additional information Auto Sound Retriever The Auto Sound Retriever feature employs DSP technology to restore sound pressure and smooth jagged arti - facts left over after compression.
117 14 Additional information Wireless LAN/Wi-Fi “Wi-Fi” (Wireless Fidelity) is a trademark coined by the Wi-Fi Alliance trade association to increase recognition of wireless LAN standards.
118 14 Additional information Features index Operation Mode See Operation Mode Setup on page 45 . AVNavigator See About using AVNavigator (included CD-ROM) on page 10 . Full Auto MCACC See Automatically conducting optimum sound tuning (Full Auto MCACC) on page 42 .
119 14 Additional information Specifications Amplifier section Continuous average power output* 8 W .......................................................................................................................................
120 14 Additional information Preset code list You should have no problem controlling a component if you find the manufacturer in this list, but please note that there are cases where codes for the manufacturer in the list will not work for the model that you are using.
121 14 Additional information BD If operations are not possible using the preset codes below, you may be able to conduct operations with the preset codes for the DVD , DVR (BDR, HDR) .
122 14 Additional information Satellite Set Top Box Pioneer 6097, 6098, 6325, 6328, 6329 ADB 6035, 6001 Akai 6102 Alba 6005, 6011, 6013 Allsat 6102 Alltech 6011 Amstrad 6033, 6030, 6044 Anttron 6013 A.
© 2012 PIONEER CORPORA TION. All rights reser v ed. To register your product, find the nearest authorized se rv ice location , to purchase replacement parts, operating instructions, or accessories, p.
Ein wichtiger Punkt beim Kauf des Geräts Pioneer SC-2022 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pioneer SC-2022 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pioneer SC-2022 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pioneer SC-2022 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pioneer SC-2022 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pioneer SC-2022 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pioneer SC-2022 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pioneer SC-2022. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pioneer SC-2022 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
