Benutzeranleitung / Produktwartung pt1250 des Produzenten Phoenix Gold
Zur Seite of 24
pt1250/pt1800/pt2400 Professional Stereo Power Amplifier.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL T.
Introduction Congratulations on your purchase of a new Carver Professional Power Amplifier. It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best in quality craftsmanship and reliable performance. The pt1250, pt1800 and, pt2400 are specially designed for pro touring applications.
• features pt1 250 2 ● 465W per channel into 8 ohms 625W per channel into 4 ohms ● XLR and 1/4” TRS input connectors ● Accepts balanced or unbalanced lines ● Heavy-duty 5-way speaker bindi.
• features 3 Continuous Average Output Power, both channels driven: 465 watts per channel into 8 ohms from 20Hz to 20kHz, with no more than 0.5% THD; 625 watts per channel into 4 ohms from 20Hz to 20kHz, with no more than 0.5% THD Parallel-mono operation: 100 watts into 4 ohms from 20Hz to 20kHz, with no more than 0.
•.
Power Output: Both channels: driven (20Hz-20kHz) 8 ohm/ch. 600 watts 4 ohm/ch. 900 watts 2 ohm/ch. 1100 watt Power Output: Series mono operation (20Hz-20kHz) 8 ohm 1800 watts 4 ohm 2200 watts Signal to Noise Ratio: >100dB (from rated power @ 4 Ω /A weighted) Frequency Response: 20Hz to 20kHz ±0.
•.
Power Output: Both channels driven (20Hz-20kHz) 8 ohm/ch. 750 watts 4 ohm/ch. 1200 watts 2 ohm/ch. 1500 watts Power Output: Series mono operation (20Hz-20kHz) 8 ohm 2400 watts 4 ohm 3000 watts Signal to Noise Ratio: >100dB (from rated power @ 4 Ω /A weighted) Frequency Response: 20Hz to 20kHz ±0.
8 2 1 3 5 4 Controls And Functions 1. CLIPPING ELIMINA TOR Pressing this switch turns on the clipping eliminator circuit. In this mode, the amplifier output remains undistorted even when overdriven by 8dB. 2. LEFT/RIGHT V OLUME CONTROLS 10-step attenuators that adjust the relative output level of the pt1250.
6. POWER CORD Connect to a properly configured outlet providing the line voltage specified for your model. 7. FAN SPEED Push-button switch that sets the idle speed of the cooling fans. For normal usage, use the low-speed position. The fan speed is proportional to the amplifier power output.
10 Controls And Functions 1. POWER SWITCHES Channel 1 and Channel 2 power switches independently power up each channel. The slow start up feature of each power supply allows both switches to be pushed simultaneously .
11 8. XLR POLARITY SWITCH The XLR Polarity Switch conveniently configures both XLR connectors for Pin 3 +, (Pin 2-) or Pin 2 +, (Pin 3-). [the clear security cover can be installed after switches are set.] 9. INPUT CONNECTORS The pt2400/pt1800 amplifier comes equipped with XLR and Barrier inputs.
pt1 250 Inst alla tion Location and General Precautions Observe the following precautions when choosing a location for your amplifier . A. Do not expose the unit to rain or moisture. If a fluid or foreign object should enter the unit, disconnect the power plug and contact an authorized dealer or service center.
This is infinitely preferable to breaking the ground pin off the power cord. The pt1250’s XLR connector uses the American wiring convention (pin 3 hot). Note that the pin 3 of the XLR connector cor r esponds to the tip connection on the TRS phone jack .
70V Distribution Systems The pt1250 has sufficient output voltage capability in stereo mode to drive 70-volt distribution systems without using a step-up transformer at the amplifier . The amplifier delivers 300-watts per channel to the 70-volt system.
15 AC Power Considerations Ensure that the pt1800/pt2400 is plugged into an outlet capable of supplying the correct voltage specified for your model and enough current to allow full-power operation of all the amplifiers plugged into it.
This will insure that the resistance of the speaker wire is less than 5% of 4 ohms, resulting in a transmission loss of less than 0.5 dB. The multi-way binding posts can accept spade lug, bare wire or banana connections. Be sure that all the fine strands of the wire are twisted together and contained within the connector.
CAUTION: In bridged mono operation, the output connections are actually a balanced output configuration. This means that both output terminals have voltage present (neither one may be grounded).
Fig. 3 shows a typical set up in a 3 rack with 3 amplifiers. In this case the top amplifier is the master amplifier. Its channel 1 power switch controls the power up and power down sequence for the whole rack and possibly additional racks. Channel 2 may be used as an optional backup for channel 1.
Oper a ting Tips Using the pt1250/pt1800/pt2400 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that all switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want.
Distortion Distortion is usually caused by excessive loss in the input controls (the mixer/equalizer/crossover can’t produce enough output), overdriving resulting in output clipping, or current limiting caused by excessively low load impedances. 1. Check the setting of the Input Level controls.
W arranty Informa tion Professional Power Amplifiers: 5 years WHA T IS COVERED: THIS W ARRANTY COVERS DEFECTS IN MATERIALAND WORKMANSHIP ONL Y. This limited W arranty DOES NOT extend to: 1) Damage cau.
Part #8100.0089 Rev. B 5 Y ear W arranty 1 8 0 DA Y P erformance Guarantee Made In America A Division Of Phoenix Gold International, Inc. 9300 North Decatur ● Portland OR 97203 ● T el: 503.
Ein wichtiger Punkt beim Kauf des Geräts Phoenix Gold pt1250 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Phoenix Gold pt1250 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Phoenix Gold pt1250 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Phoenix Gold pt1250 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Phoenix Gold pt1250 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Phoenix Gold pt1250 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Phoenix Gold pt1250 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Phoenix Gold pt1250. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Phoenix Gold pt1250 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
