Benutzeranleitung / Produktwartung pm950 des Produzenten Phoenix Gold
Zur Seite of 20
DECLARATION OF CONFORMITY CARVER PROFESSIONAL INTERNATIONAL (supplier ’ s name) 9300 N. DECATUR, PORTLAND, OR 97203 USA (address) declare under our sole responsibility that the product pm700/950 (na.
Introduction Congratulations on your purchase of a new Carver Professional Power Amplifier. It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best in quality craftsmanship and reliable performance. The pm700 and pm950 are specially designed for pro sound applications.
Introduction Congratulations on your purchase of a new Carver Professional Power Amplifier. It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best in quality craftsmanship and reliable performance. The pm700 and pm950 are specially designed for pro sound applications.
pm7 00 • 225W per channel into 8 ohms 350W per channel into 4 ohms 700W mono into 8 ohms • XLR and 1/4” TRS input connectors • Accepts balanced or unbalanced lines • Multi-way Binding Post o.
pm7 00 • 225W per channel into 8 ohms 350W per channel into 4 ohms 700W mono into 8 ohms • XLR and 1/4” TRS input connectors • Accepts balanced or unbalanced lines • Multi-way Binding Post o.
Power Output: (20 Hz to 20kHz, with no more than 0.1%) 325 watts per channel into 8 ohms 475 watts per channel into 4 ohms Bridged Mono: 950 watts into 8 ohms at 1kHz, with no more than 0.1% THD Dynamic Headroom: >2.0 dB Frequency Response: 20Hz to 20kHz (±0.
Power Output: (20 Hz to 20kHz, with no more than 0.1%) 325 watts per channel into 8 ohms 475 watts per channel into 4 ohms Bridged Mono: 950 watts into 8 ohms at 1kHz, with no more than 0.1% THD Dynamic Headroom: >2.0 dB Frequency Response: 20Hz to 20kHz (±0.
6 7 8 9 10 11 12 6. BRIDGED OPERATION The STEREO/MONO switch is located just behind the input panel. This switch is used to select between NORMAL STEREO operation, DUAL MONO operation, or BRIDGED MONO operation. For NORMAL STEREO operation, use CH 1 and CH 2 inputs.
6 7 8 9 10 11 12 6. BRIDGED OPERATION The STEREO/MONO switch is located just behind the input panel. This switch is used to select between NORMAL STEREO operation, DUAL MONO operation, or BRIDGED MONO operation. For NORMAL STEREO operation, use CH 1 and CH 2 inputs.
model and enough current to allow full-power operation of all the amplifiers plugged into it. The current demand of a power amplifier varies depending on several factors, including the impedance of the load, the output level of the amplifier, and the crest factor and duty cycle of the program material.
model and enough current to allow full-power operation of all the amplifiers plugged into it. The current demand of a power amplifier varies depending on several factors, including the impedance of the load, the output level of the amplifier, and the crest factor and duty cycle of the program material.
Output Wiring Use heavy gauge wire for speaker connections. The greater the distance between the amplifier and the speakers, the larger the diameter the wire should be to minimize power losses across the wire and improve the damping of the speaker .
Output Wiring Use heavy gauge wire for speaker connections. The greater the distance between the amplifier and the speakers, the larger the diameter the wire should be to minimize power losses across the wire and improve the damping of the speaker .
Oper a ting Tips Using the pm700 / pm950 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that the switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want.
Oper a ting Tips Using the pm700 / pm950 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that the switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want.
Figure 9 Input Polarity The XLR input connectors on the pm700 / pm950 are shipped from the factory with pin 2 hot (+), as indicated on the rear panel. The polarity of the balanced inputs can be reversed by changing four jumpers located on the Input Board.
Figure 9 Input Polarity The XLR input connectors on the pm700 / pm950 are shipped from the factory with pin 2 hot (+), as indicated on the rear panel. The polarity of the balanced inputs can be reversed by changing four jumpers located on the Input Board.
W arranty Informa tion Professional Power Amplifiers: 5 years WHA T IS COVERED: THIS W ARRANTY COVERS DEFECTS IN MATERIAL AND WORKMANSHIP ONL Y. This limited W arranty DOES NOT extend to: 1) Damage ca.
W arranty Informa tion Professional Power Amplifiers: 5 years WHA T IS COVERED: THIS W ARRANTY COVERS DEFECTS IN MATERIAL AND WORKMANSHIP ONL Y. This limited W arranty DOES NOT extend to: 1) Damage ca.
DECLARATION OF CONFORMITY CARVER PROFESSIONAL INTERNATIONAL (supplier ’ s name) 9300 N. DECATUR, PORTLAND, OR 97203 USA (address) declare under our sole responsibility that the product pm700/950 (na.
Ein wichtiger Punkt beim Kauf des Geräts Phoenix Gold pm950 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Phoenix Gold pm950 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Phoenix Gold pm950 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Phoenix Gold pm950 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Phoenix Gold pm950 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Phoenix Gold pm950 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Phoenix Gold pm950 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Phoenix Gold pm950. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Phoenix Gold pm950 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
