Benutzeranleitung / Produktwartung 2930 des Produzenten Acer
Zur Seite of 250
Aspire 2930 Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
II Revision History Please refer to the table below for the updates ma de on Aspire 2930 Series service guide. Date Chapter Up date s.
III Copyright Copyright © 2008 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into a.
IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appe ar on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions.
V Preface Before using this information and the product it s upports, please read the fo llowing general info rma tion. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGUR A TION decided for Acer's "glo bal" product offering.
VI.
VII T able of Contents System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIII T able of Contents Removing the Switch Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Removing the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Removing the Speaker Modu le .
IX T able of Contents Replacing the Expre ss an d SD Car d Tra ys . . . . . . . . . . . . . . . . . . . . . . . . . . .123 Troubleshooting 125 Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X T able of Contents.
Chapter 1 1 System Specifications Features Below is a brief summary of the computer ’s many feature: Operating System • Genuine Windows® Vista™ Platform • Intel® Centrino® 2 proces so r tec.
2 Chapter 1 Special keys and controls • 88-/89-key keyboard • T ouchpad pointing device Power subsystem • ACPI 3.0 • 48.8 W 4400 mAh 6-cell Li-ion battery pack • 3-pin 65 W AC adapter • Energy S t ar 4.0 Dimensions and weight • 304.8 (W) 230 (D) 35 .
Chapter 1 3 Environment • T emperature: • Operating: 5 °C to 35 °C • Non-operating: -20 °C to 65 °C • Humidity (non-condensing): • Operating: 20% to 80% • Non-operating: 20% to 80% NOTE: Items marked with * d enote only selected mode ls.
4 Chapter 1 System Block Diagram MDC CONN Ver 1.5 page 31 CH73 1 8 SATA ODD Conn e cto r RJ4 5 LAN(GbE) RTL8 111 C BIOS H e adphon e SPDIF Jack N e w Ca r d page 26 Lin e in Jack Lin e in Jack page 25 page 26 ALC888 HD Cod e c Audio AMP MIC ARRAY page 25 USB x 1 (Cama r a) CRT PAGE 24 Docking CONN CRT D V I-D Conn .
Chapter 1 5 Your Acer Notebook tour After knowing your computer features, le t us show you around you r new computer . Front View No. Icon Item Description 1 Acer PureZone T wo inte rnal stereo microphones for sound recording. 2 Acer Crystal Ey e Web camera fo r video communication (only for certain models).
6 Chapter 1 Closed Front View 9 Click buttons (left, center* and right) The left and right buttons function like the left and right mouse bu tt ons. *The center button serves as Acer Bio- Protection fingerp rint reader supporting Acer FingerNav 4-way control functi on (only for certain models).
Chapter 1 7 Left View Right View No. Icon Item Description 1 External display (VGA) port Connects to a display device (e.g. external moni tor , LCD projector). 2 Acer EasyPort IV connector Connects to Acer EasyPort IV . 3 Ethernet (RJ-4 5) port Connects to an Ethernet 10/100/1000-based network.
8 Chapter 1 Rear View Bottom View No. Item Description 1 Kensington lock slot Connects to a Kensington -compatible computer security lock. 2 V entilation slot s Enable th e computer to stay co ol, even af ter prolonged u se. No. Icon Item Description 1 Battery bay Houses the computer's battery pack.
Chapter 1 9 Indicators The computer has several easy-to-read status indicators . The front panel indicators are visible even when the computer cover is closed. NOTE: 1. Chargi ng: The light shows amber when the battery is charging. 2. Fully ch arg ed: The light shows green when in AC mode.
10 Chapter 1 Touch Pad Basics (with fingerprint reader) The following items show you how to use the T ouc h Pad wi th Acer Bio-Protection fingerprint reader: • Move your finger across the touchpad (1) to move the cursor . • Press the left (2) and right (4) b uttons locat ed beneath the touchpad to perform selecti on and execution functions.
Chapter 1 11 Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor , lock, Windows, fun ction and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which yo u can to ggle on and off.
12 Chapter 1 Windows Keys The keyboard has two keys that perform Wi ndow s-specific functions. Key Description Windows key Pressed alone, this key ha s the same effect as clicking on the Windows St art button; it launches the S tart menu.
Chapter 1 13 Hot Keys The computer employs hotkeys or key combinations to access most of the computer ’s controls like screen brightness, volume out put and the BIOS utility . T o activate hot keys, press and hold the < Fn> key before pressing the other key in the hotkey combination.
14 Chapter 1 Using the System Utilities Acer Bio-Protection (only for certain models) Acer Bi o-Protection Fi ngerprint Solu tion is a multi-purpose fingerprint software package integrated with the Micr osoft Windows operating system.
Chapter 1 15 Double (vertical), T riple (primary at left), T riple (pri mary at right), or Quad Acer Gridvista is dual-display compatible, allowing two displays to be partitioned independently . Acer Gridvista is dual-display compatible, allo win g two displays to be partitioned independently .
16 Chapter 1 Hardware Specifications and Configurations Processor System Memory Memory Combinations Item Specification CPU type Intel Montevin a Ce ntrino/PDC/Celeron Chipset Intel GL40+ICH9-M Feature.
Chapter 1 17 Hard Disk Drive Interface Super Multi Drive Modu le Item Specification s V endo r & Model Name Hitachi 5K250-250 5K250-160 Segate ST9250827AS ST9160827AS ST9120817AS To s h i b a MK16.
18 Chapter 1 Combo Drive Module Applicable disc format Applicable media types: Writing: Confirms to DVD+R V ersion 1.2 and DVD+RW V ersion 1.3 / DVD+R DL V ersion 1.
Chapter 1 19 Thermal Sensor Control BIOS LCD 12” Item Specification Thermal Sensor Chip Package Features Interface Item Specification BIOS vendor Insyde BIOS code BIOS V ersion v0.
20 Chapter 1 KBC Memory Card Reader Audio Interface LAN Interface Modem Bluetooth Inte rface Physical Size (mm) Electrical Interface Support Color Viewing Angle (degree) Horizontal: Right/Left V ertic.
Chapter 1 21 Keyboard Camera Finger Prin t Board Battery Item Specification T ype Aspire 12" T otal number of keyp ads 88/89 Windows logo key Support Windows keys and Application keys Internal & external keyboard work simultaneously Plug USB keyboard to the USB port directly: Y es Item Specification T ype 1.
22 Chapter 1.
Chapter 2 23 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is alre ady properly configured and optimi zed, and you do not need to run this utility .
24 Chapter 2 Information The Information screen displays a summary of your computer ha rdware information. NOTE: The system information is su bject to diff erent models. Parameter Description CPU T ype This field shows the CP U type and spee d of the system.
Chapter 2 25 Main The Main screen allows th e user to set the system time and date as well as enable and disable bo ot option and recovery . NOTE: The screen above is for your reference only . Actual values may differ . The table below describes the parameters in this screen.
26 Chapter 2 Advanced The Advanced screen allows the user to c onfigu re the various advanced BIOS options. IMPORT ANT : Making incorrect settings to item s on these pages may cause the system to malfunction. Unless you have experience adjus ti ng these items, we re commend that you leave these setti ngs at the default values.
Chapter 2 27 Video Configuration Enter the Video Configuration menu. • IGD Device2, Function1 • IGD Pre-allocate Memory • IGD DVMT Size • Clo ck Ch i p Intialize • Enabled CK SSC • IGD Boot T ype • IGD LCD Panel T ype • IGD TV USB Configuration Enter the USB Configuration menu.
28 Chapter 2 Security The Security screen co ntains parameters that help sa feguard and protect your co mputer from unautho ri zed use. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Chapter 2 29 Setting a Password Follow these steps as you set the user or the supervisor password: 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Supervisor Password box appears: 2. T ype a password in the “Ente r New Password” field.
30 Chapter 2 Changing a Password 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Password box appears. 2. T ype the current passw or d in the Enter Curr en t Pa ssw or d field and press Enter .
Chapter 2 31 Power The Power screen allows th e user to configure various CPU and power management op tions and device wakeup behavior . I ns y deH20 S et up Uti lit y Rev .
32 Chapter 2 The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default and suggested parameter setting s. Parameter Description Submenu Items Advanced CPU Control Enter the Advanced CPU Control menu.
Chapter 2 33 Boot This menu allows the user to deci de the order of boot devices to l oad the operating syste m. Bootable devices includes the USB diskette drives, the onboard hard disk dr ive and the DVD drive in the module bay . I ns y deH20 S et up Ut ili ty Rev .
34 Chapter 2 Exit The Exit screen allows you to save or discard any changes you made an d qui t th e BIOS Utility . The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setu p and save your changes to CMOS.
Chapter 2 35 BIOS Flash Utilities The BIOS flash memory upd ate is required for th e following con ditions: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. Use the Phlash util ity to update the system BIOS flash ROM.
36 Chapter 2 4. In flash BI OS, the me ssage Please do not remo ve AC Power Source displays. NOTE: If the AC power is n ot connected, the following message displays. Plug in the AC po wer to continue. 5. Flash is complete when the followi ng message displays.
Chapter 2 37 WinFlash Utility Perform the following steps to use the InsydeFlash Utility: 1. Double click the InsydeFlash execu table. The InsydeFlash program begins updating the BIOS. IMPORT ANT : Do not turn off the computer during the update process.
38 Chapter 2 Remove HDD/BIOS Utility This section provide you with removing HDD /BIOS method: Remove HDD Password: When the user keys in the wrong password three times, the system reports the following error code to user . T o unlock the HDD password, perform the following steps: 1.
Chapter 2 39 Removing BIOS Passw or ds: If you key in the wrong Supervisor Password three time s, System Disabled displa ys on the screen. See the image below . T o reset the BIOS pa ssword, run BIOS_PW .EXE as follows: 1. Key in bios_pw 14452 0 2. Select one string from the list.
40 Chapter 2 3. Reboot the system and key in the selected string (qjjg9vy , 07yqmjd etc.) for the BIOS user password. Cleaning BIOS Passwords T o clear the password, perform the following steps: 1. From a D OS prompt , Execute clnpwd.exe 2. Press 1 or 2 to clean the desired password shown on the screen.
Chapter 3 41 Machine Disassembly and Replacement This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting .
42 Chapter 3 General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system.
Chapter 3 43 External Module Disassembly Process External Modules Disassembly Flowchart The flowchart below gives you a graph ic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicin g .
44 Chapter 3 Removing the Battery Pack 1. T urn computer over . 2. Slide the battery lock/unlock l atch to the unlock p osition. 3. Slide and hold the batte ry release latch to the rele ase posi tion (1), then slid e out the battery pack from the main unit (2).
Chapter 3 45 Removing the ExpressCard dummy card 1. Push the ExpressCard dummy card all the way in to eject it. 2. Pull it out from the slot..
46 Chapter 3 Removing the SD dummy card 1. Push the SD dummy card all the way in to eject it . 2. Pull it out from the slot..
Chapter 3 47 Removing the Lower Covers 1. Remove the Battery Pack. See “Removing the Battery Pack” on page 44. 2. Loosen the 3 captive screws on the WLAN and Memory covers.
48 Chapter 3 Removing the WLAN Module 1. Remove the Battery Pack. See “Removing the Battery Pack” on page 44. 2. Remove the Memory Cover . See “Removing the Low er Covers” on page 47. 3. Disconnect the 2 antenna cables from the WLAN board. NOTE: When replacing, connect the black cable to t he MAIN and the white to the AUX connector .
Chapter 3 49 5. Detach the WLAN board from the WLAN socket..
50 Chapter 3 Removing the Hard Disk Drive Module 1. See “Removing the Battery Pack” on page 44. 2. Remove the HDD2 cover . See “Removing the Lower Covers” on page 47. 3. Remove the three screws securing the HDD modul e. 4. Pull the HDD out of the bay and clear out o f the chassis.
Chapter 3 51 5. Remove the four screws securing the hard disk to the carrier . NOTE: Replace the screws according to th e numbering sequence as shown in the previou s image.
52 Chapter 3 Removing the Optical Drive Module 1. See “Removing the Battery Pack” on page 44. 2. Loosen the screw to remove the ODD cap. 3. Remove the single securing screw . 4. Using a screw driver , push the ODD module an d gras p the front panel to remove from the computer .
Chapter 3 53 5. Remove the two screws securing the ODD bracket and re move the ODD bracket from the opti cal disk drive module. IMPORT ANT : Do not remove the ODD bezel by pulli ng on it entirely or damage will occur . 6. Grasp the edge of the bezel and firmly pry the top edge down and outward to remove.
54 Chapter 3 Removing the DIMM Modules 1. Remove the Memory Cover . See “Removing the Low er Covers” on page 47. IMPORT ANT : It is advisable to use a plastic pry during this procedure. 2. Use a pry to release the latches on both sides of the DIMM socket.
Chapter 3 55 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List Step Screw Quantity Part No. Switch Cover M2.5*5 2 86.ART02.004 S peaker Module M2.5*4 4 86.AR T02.003 LED Board M2*3 1 86.ART02.001 Power Board M2*3 1 86.ART02.001 LCD Module M2.
56 Chapter 3 Launch Board M2*3 3 86.ART02.001 USB Board M2*3 1 86.ART02.001 I/O Board M2*3 1 86.ART02.001 Modem Module M2*3 2 86.ART02.001 Mainboard M2*3 3 86.
Chapter 3 57 Removing the Switch Cover CAUTION: Using tools to remove the Switch Cover ma y cause damage to the outer casing. It is recommended that only fingers are us ed to remove the Switch Cover . 1. See “Removing the Battery Pack” on page 44.
58 Chapter 3 5. While holding the corner, firmly move the Switch Cover back (A) and forth (B) to release the locking catches (four in front and fo ur i n ba ck) on th e ba ck an d fron t of the Switch Cover . 6. Repeat the wiggling procedure until the Swi tch Cover is removed.
Chapter 3 59 Removing the Keyboard 1. See “Removing the Switch Cover” on page 57. 2. Grasp the middle of the keyboard and firmly and lift up to remove.
60 Chapter 3 Removing the Speaker Module 1. Remove the Keyboard. See “Removing the Keyboard” on page 59. 2. Remove the four securing screws. 3. Pull back the adhesive strips to expose the S peaker cabl ing. 4. Using the tweezers, disconnect the cabling as sh own.
Chapter 3 61 5. Remove both S peaker Modules..
62 Chapter 3 Removing the Antenna 1. Remove the Memory Cover . See “Removing the Low er Covers” on page 47. 2. Remove the WLAN Module. See “Removing the WLAN Modu le” on page 48. 3. Remove the Keyboard. See “Removing the Keyboard” on page 59.
Chapter 3 63 7. Place the computer rightside up, and remove the cables from the housing..
64 Chapter 3 Removing the LED Board 1. Remove the Keyboard. See “Removing the Keyboard” on page 59. 2. Unlock the FFC connector and remove the FFC. 3. Remove the single securing screw . 4. Grasp the top side of the LED Board and pivot upwards to remove.
Chapter 3 65 Removing the Power Board 1. Remove the Keyboard. See “Removing the Keyboard” on page 59. 2. Unlock the FFC connector and remove the FFC. 3. Remove the single securing screw . 4. Using your finger lift the bottom side of the Power Board to remove.
66 Chapter 3 Removing the LCD Module 1. Remove the Antenna cables. See “R emoving the An tenna” on page 62. 2. Remove the LED Board. See “Rem oving the LED Board” on page 64. 3. Remove the Power Board. See “Removing the Power Board” on page 65.
Chapter 3 67 7. Disconnect the Ground cable as shown. 8. Disconnect the two cables a s shown. NOTE: The Power Board must be removed to expose the LCD cables . 9. Grip the LCD an d carefu ll y rem ove the module from th e ch ass is. IMPORT ANT : Place the LCD module face up on a clean surface to prevent scratching or damage.
68 Chapter 3 Removing the Upper Cover 1. Remove the ExpressCard dummy card. See “Remov ing the Expres sCard dummy card” o n page 45. 2. Remove the Switch Board. See “R emoving the LED Board” on page 64. 3. Remove the LCD module. See “Removing the LCD Modul e” on page 66.
Chapter 3 69 6. Disconnect the four cables from the mainboard as shown. Release the securing latch and disconnect (A) as shown. Release the securi ng latch and disconn ect (B) as shown. Release the securing latch and disconnect (C) as shown. Release the securing latch and disconnect (D) as shown.
70 Chapter 3 IMPORT ANT : Do not lift the entire Upper Case up at the same time or damage may occur . 7. Grasp the top right corner of the Upper Case and pi vot upwards. 8. Continue prying the rig ht upwards until the right side is at a 45 degree angle .
Chapter 3 71 Removing the Finger Print Reader 1. See “Removing the Upper Cove r” on page 68. 2. Remove the single securing screw from the Finger Print Reader bra cket. 3. Remove the bracket as shown. 4. Using your fingers, gently lift the Finger Print Reader board from the Upper Cover .
72 Chapter 3 Removing the TouchPad Bracket 1. Remove the Upper Cover . See “Remov ing the Fi nger Print Reader” on page 71. 2. Lift up the locking lever (1) and remove the T ouch Pad FF C fro m the T ouch Pad board (2). NOTE: T o replace the T ouch Pad, the entire Upper Cover must be replaced.
Chapter 3 73 4. Grasp the left side of the bracket and angle upwards to remove..
74 Chapter 3 Removing the Launch Board 1. See “Removing the Upper Cove r” on page 68. 2. Remove the three securing screws. 3. Remove the Launch Board from the upper cover . IMPORT ANT : T ake note of the FFC and ensure it does not catch on the uppe r cover .
Chapter 3 75 Removing the USB Board 1. See “Removing the Upper Cove r” on page 68. 2. Unlock the securing latch and release the FFC. 3. Remove the securing screw .
76 Chapter 3 Removing the I/O Board 1. See “Removing the Upper Cove r” on page 68. 2. Remove the single securing screw . 3. Grasp the module by the end, pivot and lift the board to remove.
Chapter 3 77 Removing the Bluetooth Module 1. Remove the USB Board. See “Removing the USB Board” on page 75. 2. Lift the Bluetooth modul e away from the base.
78 Chapter 3 Removing the Modem Module 1. See “Removing the Upper Cove r” on page 68. 2. Peel back the adhesive stri p to expose the cabling. 3. Remove the cable as shown.
Chapter 3 79 5. Lift the module from the mainboard..
80 Chapter 3 Removing the Mainboard 1. See “Removing the Upper Cove r” on page 68. 2. Remove the Bluetooth Module. See “Rem o ving the Bluetooth Module” on page 77. 3. Remove the three securing screws. 4. Remove the DC-IN jack from its socket.
Chapter 3 81 5. Lift the cable from the housing guide as shown. 6. Ensure the modem cable is disconnected fr om th e bottom of the mainboard as well. 7. Pry the edge of the Lower Base outward then lift and pivot the Mainboa rd slightly upwards. Do not pull up completely .
82 Chapter 3 8. Continue to pry the base outward, while lifting th e mainboard at the same time. 9. Once the bottom of the mainboard is clear of the lower case, conti nue lifting the mainboard. T ake note of th e DC-IN cable. 10. Remove the Mainboard from the lower base.
Chapter 3 83 Removing the RJ-11 Jack 1. Remove the Mainboard. See “Removing the Mainb oard” on page 80. 2. Locate the RJ-1 1 cable end and remove to the mylar cover . 3. Remove the RJ-1 1 jack. 4. T urn the Lower Base over and pull back the mylar cover to release the cabling.
84 Chapter 3 5. Ensure all parts of the cabling are no longer secure to the base, and pull th e cable completely through to remove..
Chapter 3 85 Removing the Fan/Thermal Module 1. Remove the Mainboard. See “Removing the Mainb oard” on page 80. 2. Disconnect the Fan cable from the mainboard. 3. Loosen the four (4) captive screws in nume rical orde r from 4 to 1. IMPORT ANT : Lift the Fan/Thermal Module by the thermal assembly to avoid damage to the CPU 4.
86 Chapter 3 Removing the CPU 1. Remove the Mainboard. See “Removing the Mainb oard” on page 80. 2. T ake note of the indicators on the socket cam screw . Using a flat screwdriver , turn the CPU socket screw counter-clockwise until it indicates unlocked.
Chapter 3 87 LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List Ste p Screw Quantity Part No. LCD Bezel M2.5*5 4 86.ART02.004 Inverter Board M2.5*4 1 86.ART02.003 Camera Board M2.5*4 1 86.ART02.003 LCD Panel M2.5*4 2 86.ART02.003 LCD Bracket s M2*4 4 86.
88 Chapter 3 Removing the LCD Bezel 1. Remove the LCD Module. See “Removing the LCD Modul e” on page 66. 2. Remove the four rubber covers and screws. 3. S t arting from the inside edges, pry the i nside of th e bezel upwards from the panel. Continue moving left until the bezel is removed.
Chapter 3 89 4. Lift up the bezel and di sconnect the MIC module. 5. Remove the bezel from the LCD module..
90 Chapter 3 Removing the Inverter Board 1. Remove the LCD Bezel. See “Removing the LCD Bezel” on page 88. 2. Pull back the adhesive stri p to expose the cabling. 3. Remove the single securing screw . 4. Lift the Inverter board clear of th e LCD Module.
Chapter 3 91 5. Disconnect the left and right Inverter board cables as shown..
92 Chapter 3 Removing the Camera Module 1. Remove the LCD Bezel. See “Removing the LCD Bezel” on page 88. 2. Remove the single securing screw . IMPORT ANT : Be careful when using a sharp tool to remove th e ca ble or camera module. The surface of the LCD panel can be easily scratched.
Chapter 3 93 4. Lift the camera module as shown, but do not remove completely . 5. Hold the connector with one hand and p ull the Camera Module to remove.
94 Chapter 3 Removing the LCD Panel 1. Remove the LCD Bezel. See “Removing the LCD Bezel” on page 88. 2. Remove the two securing screws from the LCD Module. IMPORT ANT : The correct screw sockets are indicated by a mark on the hinge. 3. Grasp the LCD Panel by the hinges and tilt upwards and away to remove the LCD Module.
Chapter 3 95 Removing the LCD Brackets and FPC Cable 1. Remove the LCD Panel. See “Removing the LCD Panel ” on page 94. 2. T urn the LCD panel over to expose the rear . Remove the mylar strips securing the FPC cable. 3. Grasp the pull-tab and d isconnec t the cable from the panel.
96 Chapter 3 5. Remove the LCD bracke ts by pulling them away from the LCD Panel as show n. Removing the LCD Antenna 1. Pull back the adhesive strips to expose the Antenna cables. 2. Pull up on th e ends of the Antennas and remove the mylar strip from both Antennas.
Chapter 3 97 Removing the LCD MIC 1. Remove the padding to expose the mylar cover . 2. Pull back the tabs to expose the MIC cable. 3. Grip the MIC cable and gently remove it from the back cover .
98 Chapter 3 LCD Module Reassembly Procedure Replacing the LCD Panel 1. Insert the MIC cable along the mylar tabs as shown. 2. Replace the tabs over the cable to secure in place. 3. Replace the padding over the mylar cover . 4. Replace the mylar strip on both Antennas.
Chapter 3 99 6. Replace the eleven (1 1) adhesive stri ps to secure the Antenna cables. 7. Secure the top of the brackets in place and pivot the brackets towards the LCD Panel as shown. 8. Replace the four securing screws (two on each side) from the LCD Panel brackets.
100 Chapter 3 9. Connect the LCD cable to the panel. 10. Replace the cable an d pre ss do w n att ach the adhesive strips. 11 . Insert the top of LCD Panel fi rst and tilt down in place. IMPORT ANT : Ensure all cabling is tucked correctly in the back cover .
Chapter 3 101 13. Hold the connector with on e hand and insert the Camera Modul e as shown. 14. Lower the camera module as shown 15. Replace the bracket over the Camera Board. 16. Replace the single securing screw . 17. Connect the left and right Inverter board cables as shown.
102 Chapter 3 Replacing the LCD Bezel 18. Insert the right side and lowe r Module in place. 19. Replace the single secur ing screw . 20. Replace the adhesive strip to secure the cabling in place. NOTE: Ensure all cabling is tucked in under the adhesive strip to pr event damage.
Chapter 3 103 2. Insert the cabling inside the hinge wells to prevent damage or fraying . 3. S tarting from the bottom and moving left to right, firmly press down to ensure the bezel is situated correctly (four locations on each side). 4. Replace the four screws and the rubber caps provided.
104 Chapter 3 Main Module Reassembly Procedure Replacing the CPU Replacing the Thermal Module 1. Carefully turn the mainboard upside down (CPU socket side up), and insert the CPU into the CPU socket as shown. 2. Using a plastic screw driver , lock the CPU in the socket as shown.
Chapter 3 105 Replacing the RJ-11 Jack 1. Insert the RJ-1 1 cable through the housing well and replace the cable cover to secure in place. 2. Turn the base over , and insert the cables along the well in the bottom cover as shown. 3. Replace the RJ-1 1 Jack and tuck in cabling in the housi ng well to prevent damage.
106 Chapter 3 Replacing the Mainboard 1. Ensure that the Mainboa rd is facing down (the Heatsi nk and CPU are not visible). Place the Mainboard in the chassis, making sure the I/O ports are positio ned correctly through the lower co ver, and the screw sockets are visible through the mainboard.
Chapter 3 107 6. Replace the three securing screws..
108 Chapter 3 Replacing the Modem Module Replacing the Bluetooth Board 1. Align the connectors on the mainboard and the module and insert the mo dule in place. 2. Replace the tw o secu ri ng sc rew s on th e mo dem module. 3. Connect the modem cable to the module.
Chapter 3 109 Replacing the I/O Board Replacing the USB Board Replacing the Launch Board 1. Insert the board at an angle, pivo t and set it down in place. 2. Replace the si ng l e se cur ing screw . 1. Align the USB board with the screw socket and replace the single secu ring screw .
11 0 Chapter 3 Replacing the TouchPad Bracket IMPORT ANT : The T ouchPad cannot be removed ind ividu ally . T o replace the T ouchPad, replace the en tire Upper Cover . 1. Insert the bracket at an angle as sho wn. 2. Replace the single securing screw .
Chapter 3 111 Replacing the Finger Print Reader NOTE: Carefully insert the FF C cable ends fully into the connector . T ake care to line up the cable square with the connector befo re securing the FFC connector latch . Replacing the Upper Cover 1. T ilt the Upper cover and insert the left side of the cover into place.
11 2 Chapter 3 3. Press down around the edges of the casing to snap it into place. 4. Connect the four cables to the mainboard as shown. A B C D.
Chapter 3 11 3 5. Replace the five securing screws on the top panel. Insert the FFC flush with th e connector and secure the latch as shown. Insert the FFC flush with the connector and secure the latch as shown. Insert the FFC flush with th e connector and secure the latch as shown.
11 4 Chapter 3 6. T urn over the computer and replace t he eight securing screws on the bottom panel. Replacing the LCD Module 1. Align the LCD Mo dule hinges with the alignment pins and gently set dow n.
Chapter 3 11 5 3. Replace the ground screw cable and scre w and r eplace the four securing screws on the hin ges. 4. Secure the cables in place as shown.
11 6 Chapter 3 5. Insert the Antenna Cables through the Upper Cover . Make sure they are accessible from the und erside. 6. T urn the computer over and pull the antenna cables until they are taunt. 7. Place the antenna cables in the ca ble channel and insert them through the casing into the WLAN bay .
Chapter 3 11 7 Replacing the Power Board Replacing the LED Board Replacing the Speaker Module 1. Place the Power Board in its location and replace the screw . 2. Replace the FFC and ensure the cable is flush with the connector . Secure by locking the latch.
11 8 Chapter 3 Replacing the Keyboard 2. Insert the cabl es fl us h w it h th e co nn e c to rs. 3. Replace the adhesive strip to secure the cabling. 4. Replace the four securing screw s. 1. Replace keyboard cable to the mainboard, and secure the locking latch.
Chapter 3 11 9 Replacing the Switch Cover Replacing the WLAN Module 1. Insert the bottom edge of the Switch Cover into the chassis. 2. Press down along the length of the cove r to snap it into place. 1. Insert the WLAN board in to the WLAN socke t. 2.
120 Chapter 3 Replacing the Hard Disk Drive Module 1. Slide the HDD in the carri er as shown. 2. Re place the four screws (two on each side) securing the hard disk to the carri er. 3. Replace the HDD in the bay as show n. 4. Replace the three securing screws.
Chapter 3 121 Replacing the DIMM Modules 1. Replace the DIMM modules bottom first and press down to lock in place..
122 Chapter 3 Replacing the ODD Module Replacing the Lower Covers 1. Insert the bezel into the module as shown. 2. Turn the ODD Module around and secure the bracket with the two screws, as provided. 3. Insert the ODD module i nto the bay as shown. 4. Replace the single securing screw .
Chapter 3 123 Replacing the Express and SD Card Trays 3. Replace the WLAN cover as shown. 4. T ighten the single securing screw . 1. Insert the Express Card and push into the slot until flush with the chassis cover . 2. Insert the SD Card and push into the sl ot until flush with the chassis cover .
124 Chapter 3.
Chapter 4 125 Troubleshooting Common Problems Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses.
126 Chapter 4 Power On Issue If the system doesn’t power on, perform the following acti ons one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the fo llow ing actions one at a time to correct the problem.
Chapter 4 127 No Display Issue If the Displa y doesn’t work, perform the follo wing actions one at a time to correct the problem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display , perform the foll owing actions one at a time to correct the problem.
128 Chapter 4 Abnormal Video Display If video displays abnormally , perform the following actions one at a time to correct the proble m. 1. Reboot the computer . 2. If permanent vertical/h orizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced.
Chapter 4 129 LCD Failure If the LCD fails, perform the following actions one at a ti me to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the foll owing actions one at a ti me to correct the pro blem.
130 Chapter 4 Touch Pad Failure If the To u c h P a d doe sn’t work, perform the following action s on e at a time to correct the problem. Do no t replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the probl em.
Chapter 4 131 Sound Problems If sound problems are experienced, p erform the following actions one at a time to correct the problem. 1. Reboot the computer . 2. Navigate to Start ´ Control Panel ´ System and Maintenance ´ System ´ Device Manager .
132 Chapter 4 Internal Microphone Failure If the internal Microphone fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Microphone Problems If internal or external Mic rophones do no op erate correctl y , perform the following actions one at a time to correct the problem.
Chapter 4 133 HDD Not Operating Correctly If the HDD does not op erate correctly , perform the following ac ti ons one at a time to correct the problem. 1. Disconnect all external devices. 2. Run a complete virus scan using up-to-date software to ensure the computer is virus free.
134 Chapter 4 ODD Failure If the ODD fails, perform the following acti ons one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits a.
Chapter 4 135 a. Double-click lDE A T A/A T API controllers . If a device displa ys a down arrow , right-cl ick on the device and click Enable . b. Double-click DVD/C D-RO M dri ves . If the device displays a down arrow , right-click on the device and click Enable .
136 Chapter 4 b. Double-click IDE A T A/A T API controllers , then right-click A T A Device 0. c. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK . d. Repeat for the other A T A Devices shown if applicable.
Chapter 4 137 USB Failure (Rightside) If the rightside USB port fails, perform the following actio ns one at a time to correct the problem. Do not replace a non-defective FRUs: Modem Function Failure If the internal Modem fails, perform the followin g actions one at a time to correct the problem.
138 Chapter 4 Wireless Function Failure If the WLAN fails, perform th e following actions one at a time to correct th e probl em. Do not replace a non- defective FRUs: EasyTouch Button Failure If the Ace r EasyT ouch buttons fail, perform the following action s one at a time to correct the problem.
Chapter 4 139 MediaTouch Button Failure If the Acer MediaT ouch buttons fail, perform the following actions one at a time to corre ct the problem. Do not replace a non-defective FRUs: Fingerprint Reader Failure If the Fingerp rint Reader fails, pe rform th e following actions one at a time to correct the problem.
140 Chapter 4 Thermal Unit Failure If the Thermal Unit fails, perform the follo wing actions one at a time to correct the problem. Do not replace a non-defective FRUs: HDTV Switch Failure If the HDTV Switch fails, perform th e following actions one at a time to correct the problem.
Chapter 4 141 External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correc t th e problem. 1. T ry an alternative mouse. 2. If the mouse uses a wireless connection, i nsert new batteries and confirm there is a good co nnection.
142 Chapter 4 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothin g to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists.
Chapter 4 143 POST Codes Tables These tables describe the POST code s, drivers, and keys for the POST . Port 80 POST Codes The following table details the Port 80 POST codes and dr ivers used in the POST .
144 Chapter 4 Driver Name Port80 Code Driver Name Port80 Code SmmDisp C5 HiiDatabase 80 SmmReloc C4 OemSetupBro wser 82 SmmRuntime C7 Font(English) 7E SmmThunk C9 Font(French) 7F OemService s D8 Font(.
Chapter 4 145 POST Keys and Messages The following keys are available during POST . The following messages display du ring POST : Key Functio n F2 Enter into Setup Menu F12 Enter i nto Boot Manager Be.
146 Chapter 4.
Chapter 5 147 Jumper and Connector Locations Top View No. Description No. Description 1 LCD Connector 5 MDC Connector 2 Powerboard Connector 6 ExpressCard Board Connector 3 Keyboard Connector 7 BLueto.
148 Chapter 5 Bottom View No. Description No. Desc ription 1 CPU Socket 10 Audi o Conn ector 2 DDR2 Connector 1 1 SPDIF Connector 3 Battery Connector 12 USB Connector 4 ODD Connector 13 HDMI Connector.
Chapter 5 149 Clearing Password Check and BIOS Recovery This section provide you the standard operating proce dures of clearing password and BIOS recovery for Aspire 2930. Aspire 2930 provide one Hardware Ope n Gap on main board for clearing password check, and one Hotkey for enabling BIOS Recovery .
150 Chapter 5 BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a spec ial block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
Chapter 6 151 FRU (Field Replaceable Unit) List This chapter gives you the FRU (F ield Repl aceable Unit) list ing in global configurations of Aspire 2930. Refer to this chapte r whenever ordering for parts to repair or fo r RMA (Return Merchan dise Author ization).
152 Chapter 6 Aspire 2930 Exploded Diagrams Upper/ Lower Cover No. Description Part Number No. Description Part Number 001 S trip Cover 42.ART02.001 255 Upper Case 60.APY02.001 002 RJ-1 1 Module 50.ART02.004 256 Lower Case 60.ART02.002 003 S peaker 23.
Chapter 6 153 LCD Panel Number Description Part Number 001 LCD_COVER_SUB_ASSY 60.ART02.004 003 ANTENNA 50.ART02.001 004 H-CONN SET 043 LOGO BACK LIGHT N/A 005 M/B-LCD Cable 50.ART02.006 006 MIC SET 23.ART02.002 007 LCD_CAMERA_BRK_ASSY 33.ART02.006 008 LCD_BEZEL_SUB_ASSY 60.
154 Chapter 6 Aspire 2930 FRU List Category Descriptio n Acer PN Adapter ADAPTER 65W 3PIN DEL T A SADP-65KB AP .06501.01 3 ADAPTER 65W 3PIN SADP-65KB BFJA OBL DEL T A AP . 06501.014 ADAPTER 65W 3PIN LITEON P A-1650-02AC AP .06503.016 ADAPTER 65W 3PIN HIPRO AC-OK065B13 AP .
Chapter 6 155 IO BOARD 55.ART02.004 USB BOARD 55.ART02.005 WLAN CARD 802.1 1BG BRCM4312 FOXCONN NI.23600 .029 WLAN CARD 802.1 1BG T 60H976.00 FOXCONN TBD WLAN CARD INTEL 8 02.1 1ABGN 533AN_MMWG S/ MOW895362 KI.SPM01.001 HALF WLAN CARD INTEL 802.1 1ABGN 53 3AN_H MWG S/MOW895401 KI.
156 Chapter 6 T/P FFC 50.ART02.005 POWER CORD US 3 PIN 27.T A VV5.001 POWER CORD EU 3 PIN 27.T A VV5.002 POWER CORD AUS 3 PIN 27.T A VV5.003 POWER CORD UK 3 PIN 27.T A VV5.004 POWER CORD CHINA 3 PIN 27.T A VV5.005 POWER CORD SWISS 3 PIN 27.T A VV5.006 POWER CORD IT ALIAN 3 PIN 27.
Chapter 6 157 MINI CARD DOOR 42.AR T02.003 RAM DOOR 42.ART02.004 MINI PCI BRACKET -S 33.AR T02.001 EXPRESS DUMMY CARD 42.ART02.005 SD DUMMY CARD 42.ART02.006 CPU/Processor CPU INTEL P9500 2.53G AW80576 SH0616M SLB4E C0 KC.95001.DPP CPU INTEL T9400 2.53G AW80576G H0616M SLB46 C0 KC.
158 Chapter 6 Combo Drive DVD/CDRW COMBO DRIVE MODULE 6M.AR T02.003 DVD/CDRW COMBO DRIVE T OSHIBA/TSST TBD DVD/CDRW COMBO DRIVE SONY TBD ODD BEZEL-COMBO 42.ART02.009 ODD BRACKET 33.ART02.002 Super Multi Drive DVD SUPER MUL TI MODULE TRA Y IN 6M.ART02.
Chapter 6 159 HDD HDD SA T A 120G 5400RPM HGST HTS542512K9 SA00 KH.12007.014 HDD SA T A 120G 5400RPM TOSHIBA MK1246GSX KH.12004.007 HDD SA T A 120G 5400RPM SEAGA TE ST9120817AS KH.12001.032 HDD SA T A 120G 5400RPM WD WD1200BEVS-22UST0 KH.12008.019 HDD SA T A 160G 5400RPM HGST HTS542516K9 SA00 KH.
160 Chapter 6 KEYBOARD SWISS(SW) KB.INT00.41 1 KEYBOARD THAI(TI) KB.INT00.410 KEYBOARD TURKISH(TR) KB.INT00.409 KEYBOARD UK KB.INT00.408 KEYBOARD HEBREW(HB) KB.INT00.407 KEYBOARD JP KB.INT00.422 KEYBOARD Scandinavian (ND) KB.INT00.440 KEYBOARD Arabic_French (AR/FR) KB.
Chapter 6 161 ASSY LCD MODULE 12.1 IN. WXGA GLARE FOR CCD 1.0M 6M.ART02.002 LCD P ANEL G 12.1 WXGAG TOSHIBA L TD121EXVV -V01 HW:4 new glass LK.121 0F .019 LCD P ANEL G 12.1 WXGAG TOSHIBA L TD121EXVV -V01 LF 200nit 30ms HW:3 LK.1210F .016 LCD P ANEL G 12.
162 Chapter 6 Screw List Memory RAM 512MB DDRII 667 HYNIX HYMP164S64CP6-Y5 LF KN.5120G .024 RAM 512MB DDRII 667 SAMSUNG M470T6464QZ3-CE6 LF KN.5120B.026 RAM 1GB DDRII 667 HYNIX HYMP1 12S64CP6-Y5 LF KN.1GB0G .0 12 RAM 1GB DDRII 667 SAMSUNG M470T2864QZ3-CE6 LF KN.
Chapter 6 163.
Appendix A 164 Model Definition and Configuration Aspire 2930 Series Model RO Country Acer Part No Description CPU AS2930- 842G25Mn AAP Thailand LX.APY0X.014 AS2930-842G25Mn EM VHP32A TTH1 MC UMACOF 1*2G/ 250/BT/6L/5R/ CB_n2_FP_1.0D_HG_TH22 C2DP8400 AS2930- 862G32Bn AAP Thailand LX.
165 Appendix A AS2930- 732G25Mn EMEA Germany LX.APY0X.095 AS2930-732G25Mn VHP32A TDE1 MC UMACOF 1*2G/250/BT/6L/5R/ CB_n2_FP_1.0D_HG_DE13 C2DP7350 AS2930- 843G32Mn EMEA Germany LX.APY0X.096 AS2930-843G32Mn VHP32A TDE1 MC UMACOF 2G+1G/320/BT/6L/5R/ CB_n2_FP_1.
Appendix A 166 AS2930- 733G25Mn EMEA S pain LX.APY0X.076 AS2930-733G25Mn VHP32A TES1 MC UMACOF 2G+1G/250/BT/6L/5R/ CB_n2_FP_1.0D_HG_ES22 C2DP7350 AS2930- 733G25Mn EMEA Greece LX.APY0X.077 AS2930-733G25Mn VHP32A TGR1 MC UMACOF 2G+1G/250/BT/6L/5R/ CB_n2_FP_1.
167 Appendix A AS2930- 844G32Mn P A Canada LX.APY0X.001 AS2930-844G32Mn VHP64A TCA2 MC UMACOF 2*2G/320/BT/6L/5R/ CB_n2_FP_1.0D_HG_FR31 C2DP8400 AS2930- 844G32Mn P A USA LX.APY0X.002 AS2930-844G32Mn VHP64A TCA2 MC UMACOF 2*2G/320/BT/6L/5R/ CB_n2_FP_1.0D_HG_EN1 1 C2DP8400 AS2930- 844G32Mn PA A C L A - S panish LX.
Appendix A 168 AS2930- 844G32Mn EMEA South Africa LX.APY0X.042 AS2930-844G32Mn EM VHP32A TZA1 MC UMACOF 2*2G/ 320/BT/6L/5R/ CB_n2_FP_1.0D_HG_FR23 C2DP8400 AS2930- 844G32Mi EMEA Russia L X.APY0X.021 AS2930-844G32Mi VHP32A TRU1 MC UMACOF 2*2G/320/BT/6L/5R/ CB_abg_FP_1.
169 Appendix A AS2930- 844G32Mn EMEA Portugal LX.APY0X.034 AS2930-844G32Mn VHP32A TP T1 MC UMACOF 2*2G/320/BT/6L/5R/ CB_n2_FP_1.0D_HG_PT12 C2DP8400 AS2930- 844G32Mn EMEA S pain LX.APY0X.035 AS2930-844G32Mn VHP32A TES1 MC UMACOF 2*2G/320/BT/6L/5R/ CB_n2_FP_1.
Appendix A 170 AS2930- 733G25Mn EMEA South Africa LX.APY0X.056 AS2930-733G25Mn EM VHP32A TZA2 MC UMACOF 2G+1G/ 250/BT/6L/5R/ CB_n2_FP_1.0D_HG_EN16 C2DP7350 AS2930- 733G25Mn EMEA South Africa LX.APY0X.057 AS2930-733G25Mn EM VHP32A TZA1 MC UMACOF 2G+1G/ 250/BT/6L/5R/ CB_n2_FP_1.
171 Appendix A AS2930- 734G32Mn EMEA Middle East LX.APY0X.188 AS2930-734G32Mn EM VHP32A TME6 MC UMACOF 2*2G/ 320/BT/6L/5R/ CB_n_FP_1.0D_HG_EN15 C2DP7350 AS2930- 734G32Mn EMEA Russia L X.APY0X.189 AS2930-734G32Mn VHP32A TRU1 MC UMACOF 2*2G/320/BT/6L/5R/ CB_n_FP_1.
Appendix A 172 AS2930- 732G16Mn AAP Malaysia LX.APY0X.149 AS2930-732G16Mn EM VHP32A TMY1 MC UMACOF 1*2G/ 160/BT/6L/5R/ CB_n2_FP_1.0D_HG_EN14 C2DP7350 AS2930- 731G25Mn AAP Malaysia LX.APY0C.001 AS2930-731G25Mn LINPU SAMY1 UMACOF 1*1G/250/BT/6L/5R/ CB_n2_FP_1.
173 Appendix A AS2930- 843G32Mn EMEA Eastern Europe LX.APY0X.131 AS2930-843G32Mn VHP32A TEU4 MC UMACOF 2G+1G/320/BT/6L/5R/ CB_n2_FP_1.0D_HG_FI12 C2DP8400 AS2930- 843G32Mn EMEA Eastern Europe LX.APY0X.130 AS2930-843G32Mn VHP32A TEU3 MC UMACOF 2G+1G/320/BT/6L/5R/ CB_n2_FP_1.
Appendix A 174 AS2930- 843G32Mn EMEA Middle East LX.APY0X.1 15 AS2930-843G32Mn EM VHP32A TME6 MC UMACOF 2G+1G/ 320/BT/6L/5R/ CB_n2_FP_1.0D_HG_EN15 C2DP8400 AS2930- 843G32Mn EMEA Middle East LX.APY0X.1 14 AS2930-843G32Mn EM VHP32A TME2 MC UMACOF 2G+1G/ 320/BT/6L/5R/ CB_n2_FP_1.
175 Appendix A AS2930- 592G25Mn AAP Thailand LX.APY0X.175 AS2930-592G25Mn EM VHP32A TTH1 MC UMACOF 1*2G/ 250/BT/6L/5R/ CB_n2_FP_1.0D_HG_TH22 C2DT5900 AS2930- 842G32Mn TWN GCTWN LX.APY0X.166 AS2930-842G32Mn VHP32A TTW1 MC UMACOF 1*2G/320/BT/6L/5R/ CB_n2_FP_1.
Appendix A 176 AS2930- 842G25Mn AAP Singapore LX.ART0X.041 AS2930- 842G25Mn VHP32A TSG1 MC UMACO 1*2G/250/BT/6L/5R/ CB_n3_1.0D_HG_EN12 C2DP8400 AS2930- 862G25Mn AAP Singapore LX.ART0X.042 AS2930- 862G25Mn VHP32A TSG1 MC UMACO 1*2G/250/BT/6L/5R/ CB_n3_1.
177 Appendix A AS2930- 842G16Mn AAP Philippines LX.ART0X.054 AS2930-842G16Mn EM VHP32A TPH1 MC UMACO 2*1G/ 160/BT/6L/5R/ CB_n2_1.0D_HG_EN14 C2DP8400 AS2930- 842G25Mn AAP Philippines LX.ART0X.055 AS2930-842G25Mn EM VHP32A TPH1 MC UMACO 2*1G/ 250/BT/6L/5R/ CB_n2_1.
Appendix A 178 AS2930- 844G32Mn EMEA Eastern Europe LX.ART0X.012 AS2930-844G32Mn VHP32A TEU3 MC UMACO 2*2G/320/BT/6L/5R/ CB_n2_1.0D_HG_RU21 C2DP8400 AS2930- 844G32Mn EMEA Holland LX.ART0X.013 AS2930-844G32Mn VHP32A TNL1 MC UMACO 2*2G/320/BT/6L/5R/ CB_n2_1.
179 Appendix A AS2930- 844G32Mn EMEA Middle East LX.ART0X.030 AS2930-844G32Mn EM VHP32A TME3 MC UMACO 2*2G/ 320/BT/6L/5R/ CB_n2_1.0D_HG_FR23 C2DP8400 AS2930- 844G32Mn EMEA Middle East LX.ART0X.032 AS2930-844G32Mn EM VHP32A TME2 MC UMACO 2*2G/ 320/BT/6L/5R/ CB_n2_1.
Appendix A 180 AS2930- 592G32Mn PA A C L A - Portuguese LX.ART0X.194 AS2930-592G32Mn EM VHP32A TXC2 MC UMACO 2*1G/ 320/6L/5R/CB_n_1.0D_HG_XC21 C2DT5900 AS2930- 592G32Mn PA A C L A - S panish LX.AR T0X.193 AS2930-592G32Mn EM VHP32A TEA1 MC UMACO 2*1G/ 320/6L/5R/CB_n_1.
181 Appendix A AS2930- 732G16Mn AAP Philippines LX.ART0X.061 AS2930-732G16Mn EM VHP32A TPH1 MC UMACO 2*1G/ 160/BT/6L/5R/ CB_n2_1.0D_PH_HG_EN14 C2DP7350 AS2930- 731G16Mn AAP Philippines LX.ART0C.008 AS2930-731G16Mn LINPUSAPH1 UMACO 1*1G/160/BT/6L/5R/ CB_n2_1.
Appendix A 182 AS2930- 583G25Mn EMEA Middle East LX.ART0X.152 AS2930-583G25Mn EM VHP32A TME4 MC UMACO 2G+1G/ 250/6L/5R/CB_n2_1.0D_HG_EN1 1 C2DT5800 AS2930- 583G25Mn EMEA Switzerland LX.ART0X.153 AS2930-583G25Mn VHP32A TCH1 MC UMACO 2G+1G/250/6L/5R/ CB_n2_1.
183 Appendix A AS2930- 583G25Mn EMEA Eastern Europe LX.ART0X.122 AS2930-583G25Mn VHP32A TEU3 MC UMACO 2G+1G/250/BT/6L/5R/ CB_n2_1.0D_HG_RU1 1 C2DT5800 AS2930- 583G25Mn EMEA Eastern Europe LX.ART0X.123 AS2930-583G25Mn VHP32A TEU1 MC UMACO 2G+1G/250/BT/6L/5R/ CB_n2_1.
Appendix A 184 AS2930- 583G25Mn EMEA Middle East LX.ART0X.106 AS2930-583G25Mn EM VHP32A TME3 MC UMACO 2G+1G/ 250/BT/6L/5R/ CB_n2_1.0D_HG_FR23 C2DT5800 AS2930- 583G25Mn EMEA Middle East LX.ART0X.105 AS2930-583G25Mn EM VHP32A TME6 MC UMACO 2G+1G/ 250/BT/6L/5R/ CB_n2_1.
185 Appendix A AS2930- 733G25Mn EMEA Czech LX.ART0X.088 AS2930-733G25Mn VHP32A TCZ2 MC UMACO 2G+1G/250/BT/6L/5R/ CB_n2_1.0D_HG_SK1 1 C2DP7350 AS2930- 733G25Mn EMEA Eastern Europe LX.ART0X.089 AS2930-733G25Mn VHP32A TEU7 MC UMACO 2G+1G/250/BT/6L/5R/ CB_n2_1.
Appendix A 186 AS2930- 733G25Mn EMEA Middle East LX.ART0X.073 AS2930-733G25Mn EM VHP32A TME2 MC UMACO 2G+1G/ 250/BT/6L/5R/ CB_n2_1.0D_HG_EN15 C2DP7350 AS2930- 733G25Mn EMEA Middle East LX.ART0X.067 AS2930-733G25Mn EM VHP32A TME3 MC UMACO 2G+1G/ 250/BT/6L/5R/ CB_n2_1.
187 Appendix A AS2930- 583G25Mn EMEA Sweden/ Finland LX.ART0X.163 AS2930-583G25Mn VHP32A TSE1 MC UMACO 2G+1G/250/6L/5R/ CB_n2_1.0D_HG_FI12 C2DT5800 AS2930- 583G25Mn EMEA Czech LX.ART0X.164 AS2930-583G25Mn VHP32A TCZ2 MC UMACO 2G+1G/250/6L/5R/ CB_n2_1.
Appendix A 188 AS2930- 583G25Mn EMEA Middle East LX.ART0X.140 AS2930-583G25Mn EM VHP32A TME2 MC UMACO 2G+1G/ 250/6L/5R/CB_n2_1.0D_HG_AR13 C2DT5800 AS2930- 583G25Mn EMEA Middle East LX.ART0X.139 AS2930-583G25Mn EM VHP32A TME2 MC UMACO 2G+1G/ 250/6L/5R/CB_n2_1.
189 Appendix A AS2930Z- 321G16Mn AAP Indonesia LX.ARU0C.012 AS2930Z-321G16Mn L INPUSAID1 UMACO 1*1G/160/BT/6L/5R/ CB_bgn_1.0D_HG_ID22 PMDT3200 AS2930Z- 321G16Mn AAP Philippines LX.ARU0Y .009 AS2930Z-321G16Mn EM VHB32A TPH1 MC UMACO 1*1G/ 160/BT/6L/5R/ CB_bgn_1.
Appendix A 190 AS2930Z- 323G25Mn EMEA Germany LX.ARU0X.1 14 AS2930Z-323G25Mn VHP32A TDE1 MC UMACO 2G+1G/250/6L/5R/ CB_bgn_1.0D_HG_DE13 PMDT3200 AS2930Z- 323G25Mn EMEA Belgium LX.ARU0X.1 1 3 AS2930Z-323G25Mn VHP32A TBE1 MC UMACO 2G+1G/250/6L/5R/ CB_bgn_1.
191 Appendix A AS2930Z- 323G25Mn EMEA Greece LX.ARU0X.094 AS2930Z-323G25Mn VHP32A TGR1 MC UMACO 2G+1G/250/6L/5R/ CB_bgn_1.0D_HG_EL32 PMDT3200 AS2930Z- 323G25Mn EMEA Greece LX.ARU0X.093 AS2930Z-323G25Mn VHP32A TGR1 MC UMACO 2G+1G/250/6L/5R/ CB_bgn_1.0D_HG_EL22 PMDT3200 AS2930Z- 323G25Mn EMEA Israel LX.
Appendix A 192 AS2930Z- 322G16Mn AAP Singapore LX.ARU0X.080 AS2930Z-322G16Mn VHP32A TSG1 MC UMACO 1*2G/160/BT/6L/5R/ CB_bgn_1.0D_HG_ZH31 PMDT3200 AS2930Z- 321G16Mn AAP Thailand LX.ARU0X.001 AS2930Z -321G16Mn EM VHP32A TTH1 MC UMACO 1*1G/ 160/BT/6L/5R/ CB_bgn_1.
193 Appendix A AS2930Z- 322G25Mn EMEA UK LX.ARU0X.040 AS2930Z-322G25Mn VHP32A TGB1 MC UMACO 1*2G/250/BT/6L/5R/ CB_bgn_1.0D_HG_EN14 PMDT3200 AS2930Z- 323G25Mn EMEA South Africa LX.ARU0X.038 AS2930Z-323G25Mn EM VHP32A TZA2 MC UMACO 2G+1G/ 250/BT/6L/5R/ CB_bgn_1.
Appendix A 194 AS2930Z- 323G25Mn EMEA Eastern Europe LX.ARU0X.019 AS2930Z -323G25Mn VHP32A TEU3 MC UMACO 2G+1G/250/BT/6L/5R/ CB_bgn_1.0D_HG_RU21 PMDT3200 AS2930Z- 323G25Mn EMEA Eastern Europe LX.ARU0X.020 AS2930Z -323G25Mn VHP32A TEU5 MC UMACO 2G+1G/250/BT/6L/5R/ CB_bgn_1.
195 Appendix A AS2930Z- 323G25Mn EMEA Middle East LX.ARU0X.006 AS2930Z-323G25Mn EM VHP32A TME6 MC UMACO 2G+1G/ 250/BT/6L/5R/ CB_bgn_1.0D_HG_EN15 PMDT3200 AS2930Z- 323G25Mn EMEA Middle East LX.ARU0X.007 AS2930Z-323G25Mn EM VHP32A TME2 MC UMACO 2G+1G/ 250/BT/6L/5R/ CB_bgn_1.
Appendix A 196 AS2930Z- 322G25Mn EMEA Eastern Europe LX.ARU0X.060 AS2930Z -322G25Mn VHP32A TEU1 MC UMACO 1*2G/250/BT/6L/5R/ CB_bgn_1.0D_HG_CS21 PMDT3200 AS2930Z- 322G25Mn EMEA Eastern Europe LX.ARU0X.059 AS2930Z -322G25Mn VHP32A TEU4 MC UMACO 1*2G/250/BT/6L/5R/ CB_bgn_1.
197 Appendix A AS2930Z- 321G25Mn AAP Thailand LX.ARU0X.147 AS2930Z -321G25Mn EM VHP32A TTH1 MC UMACO 1*1G/ 250/BT/6L/5R/ CB_bgn_1.0D_HG_TH22 PMDT3200 AS2930Z- 341G25Mn AAP Thailand LX.ARU0X.146 AS2930Z -341G25Mn EM VHP32A TTH1 MC UMACO 1*1G/ 250/BT/6L/5R/ CB_bgn_1.
Appendix A 198 AS2930Z- 323G25Mn P A USA LX.ARU0X.134 AS2930Z-323G25Mn VHP32A TUS1 MC UMACO 2G+1G/250/6L/5R/ CB_bgn_1.0D_HG_EN34 PMDT3200 AS2930Z- 323G25Mn PA A C L A - Portuguese LX.ARU0X.133 AS2930Z -323G25Mn VHP32A TXC2 MC UMACO 2G+1G/250/6L/5R/ CB_bgn_1.
199 Appendix A AS2430- 571G16Cn CHINA China LX.A VQ0C.003 AS2430-571G16Cn LINP USACN1 UMACO 1*1G/160/6L/5R/ CB_bgn_1.0D_HG_EN91 CM575 Model LCD Memory 1 Memor y 2 HDD 1(GB) ODD AS2930-842G25Mn N1 2.1WXGAG SO2GBII6 N N250GB5.4KS NSM8XS AS2930-862G32Bn N12.
Appendix A 200 AS2930-733G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-733G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-733G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-733G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.
201 Appendix A AS2930-844G32Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N320GB5.4KS NSM8XS AS2930-844G32Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N320GB5.4KS NSM8XS AS2930-844G32Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N320GB5.4KS NSM8XS AS2930-844G32Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N320GB5.
Appendix A 202 AS2930-734G25Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N250GB5.4KS NSM8XS AS2930-734G25Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N250GB5.4KS NSM8XS AS2930-582G32Mn N1 2.1WXGAG SO2GBII6 N N320GB5.4KS NSM8XS AS2930-581G25Mn N1 2.1WXGAG SO1GBII6 N N250GB5.4KS NSM8XS AS2930-732G32Mn N1 2.
203 Appendix A AS2930-843G32Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N320GB5.4KS NSM8XS AS2930-843G32Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N320GB5.4KS NSM8XS AS2930-843G32Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N320GB5.4KS NSM8XS AS2930-843G32Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N320GB5.
Appendix A 204 AS2930-943G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-843G32Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N320GB5.4KS NSM8XS AS2930-863G32Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N320GB5.4KS NSM8XS AS2930-943G32Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N320GB5.
205 Appendix A AS2930-844G32Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N320GB5.4KS NSM8XS AS2930-844G32Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N320GB5.4KS NSM8XS AS2930-844G32Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N320GB5.4KS NSM8XS AS2930-844G32Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N320GB5.
Appendix A 206 AS2930-734G32Mn N1 2.1WXGAG SO2GBII6 SO2GBII6 N320GB5.4KS NSM8XS AS2930-731G16Mn N1 2.1WXGAG SO1GBII6 N N160GB5.4KS NSM8XS AS2930-582G25Mn N1 2.1WXGAG SO2GBII6 N N250GB5.4KS NSM8XS AS2930-582G25Mn N1 2.1WXGAG SO1GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-582G25Mn N1 2.
207 Appendix A AS2930-583G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-583G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-583G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-583G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.
Appendix A 208 AS2930-733G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-733G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-733G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930-733G25Mn N1 2.1WXGAG SO2GBII6 SO1GBII6 N250GB5.
209 Appendix A AS2930Z-321G16Mn N12.1WXGAG SO1GBII6 N N1 60GB5.4KS NSM8XS AS2930Z-342G16Mn N12.1WXGAG SO2GBII6 N N1 60GB5.4KS NSM8XS AS2930Z-343G32Mi N12.1WXGAG SO2GBII6 SO1GBII6 N3 20GB5.4KS NSM8XS AS2930Z-323G25Mi N12.1WXGAG SO2GBII6 SO1GBII6 N2 50GB5.
Appendix A 210 AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.
21 1 Appendix A AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930Z-323G25Mi N12.1WXGAG SO2GBII6 SO1GBII6 N2 50GB5.
Appendix A 212 AS2930Z-322G25Mn N12.1WXGAG SO2GBII6 N N2 50GB5.4KS NSM8XS AS2930Z-322G25Mn N12.1WXGAG SO2GBII6 N N2 50GB5.4KS NSM8XS AS2930Z-322G25Mn N12.1WXGAG SO2GBII6 N N2 50GB5.4KS NSM8XS AS2930Z-322G25Mn N12.1WXGAG SO2GBII6 N N2 50GB5.4KS NSM8XS AS2930Z-322G25Mn N12.
213 Appendix A AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.4KS NSM8XS AS2930Z-323G25Mn N12.1WXGAG SO2GBII6 SO1GBII6 N250GB5.
Appendix A 214 AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.
215 Appendix A AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.
Appendix A 216 AS2930-734G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-734G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-733G32Mn 5 in 1-Build in SP3x3MMW BT 2.0 AES1610 AS2930-584G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-583G32Mn 5 in 1-Build in SP1x2MMW BT 2.
217 Appendix A AS2930-843G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-843G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-843G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-843G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-843G32Mn 5 in 1-Build in SP1x2MMW BT 2.
Appendix A 218 AS2930-584G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 AES1610 AS2930-860525Mn 5 in 1-Build i n SP3x3 MMW BT 2.0 N AS2930-940525Mn 5 in 1-Build i n SP3x3 MMW BT 2.0 N AS2930-842G25Mn 5 in 1-Build in SP3x3MMW BT 2.0 N AS2930-862G25Mn 5 in 1-Build in SP3x3MMW BT 2.
219 Appendix A AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-844G32Mn 5 in 1-Build in SP1x2MMW BT 2.
Appendix A 220 AS2930-581G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-582G16Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-592G16Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-592G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-582G25Mn 5 in 1-Build in SP1x2MMW BT 2.
221 Appendix A AS2930-583G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-583G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-583G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-583G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-583G25Mn 5 in 1-Build in SP1x2MMW BT 2.
Appendix A 222 AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-733G25Mn 5 in 1-Build in SP1x2MMW BT 2.
223 Appendix A AS2930-583G25Mn 5 in 1-Build in SP1x2MMW N N AS2930-583G25Mn 5 in 1-Build in SP1x2MMW N N AS2930-583G25Mn 5 in 1-Build in SP1x2MMW N N AS2930-583G25Mn 5 in 1-Build in SP1x2MMW N N AS2930-733G32Mn 5 in 1-Build in SP1x2MMW BT 2.0 N AS2930-582G16Mn 5 in 1-Build in SP1x2MMW BT 2.
Appendix A 224 AS2930Z-323G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN N N AS2930Z-323G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN N N AS2930Z-323G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN N N AS2930Z-323G25Mn 5 in 1.
225 Appendix A AS2930Z-322G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.0 N AS2930Z-322G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.0 N AS2930Z-322G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.0 N AS2930Z-322G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.0 N AS2930Z-322G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.
Appendix A 226 AS2930Z-323G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.0 N AS2930Z-322G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.0 N AS2930Z-322G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.0 N AS2930Z-322G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.0 N AS2930Z-322G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN BT 2.
227 Appendix A AS2930Z-321G16Mn 5 in 1-Build in 3rd WiFi 1x2 BGN N N AS2930Z-323G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN N N AS2930Z-323G25Mn 5 in 1-Build in 3rd WiFi 1x2 BGN N N AS2930Z-323G25Mn 5 in 1.
Appendix A 228.
Appendix B 229 Test Compatible Components This computer ’s compat ibility is tested and verified by Acer ’s internal testing department. All of it s system functions are tested under Windows ® XP Home, Windows ® XP Pro environment. Refer to the following lists for components, adapter ca rds, and peripherals which have passed these tests.
230 Appendix B Microsoft ® Windows ® Vista Environment Test V endor Ty p e De scription Headphones 9999995 ONE TIME VENDER Headphone NB Aspire Headphone Adapter F0000183 DEL T A CN 65W Adapter DEL T A 65W 1.7x5.5x1 1 SADP-65KB DF A LF level 4 10001023 LITE-ON 65W Adapter LITE-ON 65 W 1.
Appendix B 231 10001067 INTEL C2DT9400 CPU Intel Core2Dual T9400 PGA 2.53G 6M 1066 35W 10001067 INTEL C2DT9600 CPU Intel Core2Dual T9600 PGA 2.8G 6M 1066 35W Finger Prin t Reader 9999995 ONE TIME VENDER AES1610 Authentec AES1610 HDD 60002036 SEAGA TE N120GB5.
232 Appendix B Memory 60001993 NANY A SO1GBII6 SO-DIMM DDRII 667 1GB NT1G T64U8HB0BN -3C (0.09U) 60002215 SAMSUNG SO1GBII6 Memory SAMSUNG SO-DI MM DDRII 667 1GB M470T286 4QZ3- CE6 LF 60002045 HYNIX SO.
Appendix B 233 10001067 INTEL SP1x2MABG Lan Intel WLAN 512AG_MMW G Shirley Peak 5100 MM#897004 10001067 INTEL SP1x2MMW Lan Intel WLAN 512AN_MMWG Sh irley Peak 5100 MM#895361 10001067 INTEL SP3x3HMW La.
234 Appendix B.
Appendix C 235 Online Support Information This section describe s online techni cal support services a vailable to help you repair your Acer Systems. If you are a distributor , dealer , ASP or TPM, please re fer your technical queries to your local Acer branch office.
236 Appendix C.
237 A AFLASH Utility 35 B Battery Pack 44 BIOS package 19 password control 19 ROM size 19 ROM type 19 vendor 19 Version 19 BIOS Supports protoco l 19 BIOS Utility 23–35 Advanced 26 Boot 33 Exit 34 N.
238 LCD Bezel 88 LCD Brackets 95 LCD Failure 129 LCD Module Disassembly Flowchart 87 LCD Panel 94 LED board 64 Lower Cover 47 M Main Unit Disassembly Flowchart 55 Mainboard 80 media access on indicato.
239 Wireless Function Failure 138 WLAN Board 48.
240.
Ein wichtiger Punkt beim Kauf des Geräts Acer 2930 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Acer 2930 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Acer 2930 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Acer 2930 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Acer 2930 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Acer 2930 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Acer 2930 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Acer 2930. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Acer 2930 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
