Benutzeranleitung / Produktwartung A02-RA2 ME01 des Produzenten Atlantis Land
Zur Seite of 46
I-Storm Lan Router ADSL Manual (V1.01).
.
i COPYRIGHT The Atlantis Land logo is a regist ered trademark of Atlants Land Sp A. All other names mentioned m at be trademarks or registered trademarks of their respective owners. Subject to ch ange without n otice. No liability for technical errors and/or omissions.
AtlantisLand I-Storm Lan Router ADSL ii INDEX 1.1 I NTRODUCTION TO E THERNET R OUT ER ........................................................................... 4 1. 2 P RODUCT F EATURES ...............................................................
Capitolo 1 Introduzione iii APPENDIX: ISP ......................................................................................................................... 33 Scenario 1: Bridge Mode Conf iguration (with PPPoE Client) .........................
4 I-S torm Lan Router Manual 1.1 Introduction to Ethernet Router The I-Storm Lan Router ADSL is optimized to a ddress the growing demand for high-speed Internet access. With both a USB 1.1-complient interface a nd an IEEE 802.3-complient Ethernet interface, it provides the widest array of connectivity op tions without relaying on host PC drivers.
5 Bridge / Router Protocols • Ethernet to ADSL self learning Transparent Bridging (IEEE 802.1D ) • 128 MAC Address support • RIPv2(backward compatible route table) • Static IP Routing(Conf igu.
AtlantisLand I-Storm Lan Router ADSL 6 • Simultaneous operation w ith Ethernet Interface • Host driver for Win98se,2K,Me,XP HTTP Web-Based Management • Local Firmware upgrade via FTP or Web • .
7 LED Indicators The LED Indicators read as follows: LED INFORMATION 1 POWER Steady red light indicates the router is powered on. 2 READY System status indicators wh en blinking indicate system is alive. 3 ADSL Steady green light indicate s a valid ADSL connection.
AtlantisLand I-Storm Lan Router ADSL 8 PORT MEANING 1 POWER (jack) Connect the supplied power adapter to this jack 2 USB Connect the USB cable to this port when Upgrading Firmware or connecting to PC .
9 4. Now, you have two setting methods: A. Get IP from Router.
AtlantisLand I-Storm Lan Router ADSL 10 B. Configure IP manually. Select Specify an IP address on the IP address tab . The default IP address of Router is 192.168.1.254. So please use 192.168.1.x (X is between 1 and 253) for IP address field and 255.255.
11 B. Configure IP Address manually. Select Use the follow ing IP address . The default IP address of Router is 192.168.1.254. So please use 192.168.1.X (X is between 1 and 253,) for IP address field and 255.255.255.0 for Subnet Mask field. In the Default Gateway field, add the IP address of the Router (default IP is 192.
AtlantisLand I-Storm Lan Router ADSL 12 1.8 CONFIGURING ADSL ROUTER The Router offers a web-based (H TML) graphical us er interface allo wing users to manage the Router using a standard browser software such as Netsca pe Navigator or Microsof t Internet Explorer.
13 1.10 ROUTER CONFIGURATION WAN The WAN configuration page allows user to set the configuration fo r the WAN/ADSL ports. 1. Per VC Settings: Under Per VC Setting, it provide s the configurations for IP address, Subnet Mask, Gateway and VPI/VCI. Current firmware supports eight PVCs.
AtlantisLand I-Storm Lan Router ADSL 14 5. PPP Configuration: The current release supports multiple PPP sessions per PVC. The PPP configuration in the WAN conf iguration page is for the first PPP session for each PVC.
15 ADSL modem’s WAN IP) the IGM P report to ADS L WAN side, include all PVCs. The same case is for IGMP leave packet. Not necessary to re lay multicast routing between two ADSL PVCs or two interfaces in LAN side. Special purpose multicast packet (such as RI P 2 packet) should run without interference.
AtlantisLand I-Storm Lan Router ADSL 16 2. Encapsulation: 1483 Bridged IP LLC 3. Bridged: Disabled 4. NAT Configuration: Dynamic NAPT Please see scenario 2: Router Mode Configurati on with Dynamic IP in Appendix for more detail configuration.
17 3. Bridged: Disabled 4. PPP User Name: Provided by ISP 5. PPP password: Provided by ISP 6. NAT Configuration: Dynamic NAPT Please see scenario 5: Router M ode Configuration PPPoE in Appendix for more detail configuration. 8.5 Classical IP over ATM ( RFC 1577) Following settings are necessary when working under this mode: 1.
AtlantisLand I-Storm Lan Router ADSL 18 • Use the Default IP Address. The Router comes with a preset default IP address setting of 192.168.1.254 for the LAN port.
19 the LAN client and the WAN host will i ndicate their MSS during the TCP connection handshake. The default value is 1432. • Automatic Reconnect: When it is checked, it will mainta in the PPP connection all the tim e. If the ISP shut down the PPP connection, it wi ll automatically reconnect PPP session.
AtlantisLand I-Storm Lan Router ADSL 20 Interface : This field allows the user to c hoose specific WAN In terface (PVC or PPP Session) for NAT Session. NAT Session Name Status will be displayed at the bottom of this page to show all the Session Names with its WAN Interface.
21 Interface: This field allows the user to choose specific WAN Interface (PVC or PPP Session) for NAT Session. NAT Session Name Status will be displayed a t the bottom of this pag e to show all the Session Names with its WAN Interface. Click the link Go back to NAT Configur ation to the NAT configuration page.
AtlantisLand I-Storm Lan Router ADSL 22 Public Port : This field allows the user to en te r the port number of the Public Network. Private Port : This field allows the user to ente r the po rt num ber of the Private Network. In most cases, the private port number is same as public port number.
23 DNS Configuration Domain Name Service (DNS) is a service used on the Inte rnet for resolving f ully qualified dom ain names (FQDN) to their In ternal Protoc ol (IP) address. You can type the p referred DNS server IP address, Alternative DNS server IP address that provide d by ISP or automatically assigned by ISP.
AtlantisLand I-Storm Lan Router ADSL 24 Save Settings The Save Settings page allows users to save the ne w configuration to the flash and reboot the system. When you change all setting, you must click save settings and click submit. The Router will save settings and software reset router for about 20 seconds.
25 1.11 ROUTER ADMIN PRIVILEGE: The links under Admin Privilege are only to be acc essed and configured, when it is login with administrator login name and password.
AtlantisLand I-Storm Lan Router ADSL 26 All user-defined routes retained in the CPE m emory, regardless if they are alread y in the Routing Table, are displayed on the same Route Table page. All user defined route entries kept in the CP E m emory during run time are saved to flash when the user chooses to save and reboot the CPE.
27 Aging Timeout : This field allows the user to enter the update period for the MAC table. ADSL Configuration The ADSL Configuration page allows users to set the configuration for ADSL protocols. Trellis : This field allows the user to enable or di sable the Trellis Code.
AtlantisLand I-Storm Lan Router ADSL 28 Garbage Timeout: This field allows the user to enter the Garbage tim er in second. This timer specifies how long the expired and invalidated rout es are kept in the In ternal RIP Route Table before it is removed from it.
29 The User Password Configuration page allows the user to set the password for the user. Miscellaneous Configuration The Miscellaneous Configuration allows users to set all th e miscella neous configurations.
AtlantisLand I-Storm Lan Router ADSL 30 For the PPP connect on WAN access , the PPP will be automatically reconnected when an URL is entered in the browser (packet interested in going out the WAN). For the Automatic Reconnect, it will reconnect the PPP session when ever it is terminated by ISP.
31 Network Code Image Update The Network Code Image Update page allows users to upgrade the image code from the remote FTP server. System Log The System Log page shows the events triggered by the system.
AtlantisLand I-Storm Lan Router ADSL 32 SUPPORT If you have any problems with the ADSL Router, please consult this m anual. If you continue to have problems you should contact the dealer where you bought this ADSL Router.
33 APPENDIX: ISP ADSL Ethernet Router Configuration Scenario 1: Bridge Mode Co nfiguration (with PPPoE Client) WAN Configuration Default Gateway 0.0.0.0 VC Setting Enabled VPI Provided By ISP VCI Provided By ISP Static IP Address 0.0.0.0 Subnet Mask 0.
AtlantisLand I-Storm Lan Router ADSL 34 Misc Configuration WAN side HTTP server Disabled FTP server Disabled TFTP server Disabled HTTP server port 80 DMZ Disabled DMZ Host IP 0.
35 Scenario 2: Router Mode Configuration with Dynamic IP WAN Configuration Default Gateway 0.0.0.0 VC Setting Enabled VPI Provided By ISP VCI Provided By ISP Static IP Address 0.
AtlantisLand I-Storm Lan Router ADSL 36 HTTP server port 80 DMZ Disabled DMZ Host IP 0.0.0.0 DNS Proxy Enabled DHCP Relay Disabled IGMP proxy Disabled PPP reconnect on WAN access Disabled.
37 Scenario 3: Router Mode Configuration with Static IP WAN Configuration Default Gateway Provided by ISP VC Setting Enabled VPI Provided By ISP VCI Provided By ISP Static IP Address Provided by ISP S.
AtlantisLand I-Storm Lan Router ADSL 38 DMZ Disabled DMZ Host IP 0.0.0.0 DNS Proxy Enabled DHCP Relay Disabled IGMP proxy Disabled PPP reconnect on WAN access Disabled.
39 Scenario 4: Router Mode PPPoA Configuration (RFC2364) WAN Configuration Default Gateway 0.0.0.0 VC Setting Enabled VPI Provided By ISP VCI Provided By ISP Static IP Address 0.
AtlantisLand I-Storm Lan Router ADSL 40 DMZ Host IP 0.0.0.0 DNS Proxy Enabled DHCP Relay Disabled IGMP proxy Disabled PPP reconnect on WAN access Enabled.
41 Scenario 5: Router Mode PPPoE Configuration (RFC2516) WAN Configuration Default Gateway 0.0.0.0 VC Setting Enabled VPI Provided By ISP VCI Provided By ISP Static IP Address 0.
AtlantisLand I-Storm Lan Router ADSL 42 DMZ Disabled DMZ Host IP 0.0.0.0 DNS Proxy Enabled DHCP Relay Disabled IGMP proxy Disabled PPP reconnect on WAN access Enabled.
43 Scenario 6: Router Mode Configuration with Classical IP over ATM (RFC1577) WAN Configuration Default Gateway Provided by ISP VC Setting Enabled VPI Provided By ISP VCI Provided By ISP Static IP Add.
AtlantisLand I-Storm Lan Router ADSL 44 TFTP server Disabled HTTP server port 80 DMZ Disabled DMZ Host IP 0.0.0.0 DNS Proxy Enabled DHCP Relay Disabled IGMP proxy Disabled PPP reconnect on WAN access .
Ein wichtiger Punkt beim Kauf des Geräts Atlantis Land A02-RA2 ME01 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Atlantis Land A02-RA2 ME01 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Atlantis Land A02-RA2 ME01 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Atlantis Land A02-RA2 ME01 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Atlantis Land A02-RA2 ME01 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Atlantis Land A02-RA2 ME01 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Atlantis Land A02-RA2 ME01 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Atlantis Land A02-RA2 ME01. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Atlantis Land A02-RA2 ME01 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
