Benutzeranleitung / Produktwartung HD8661 des Produzenten Philips Saeco
Zur Seite of 60
USER MANU AL Read carefully befor e using the machine. Register your product and get suppor t at www .saeco .com/w elcome English T ype HD8661, HD8664 EN 02 02.
IMPORT ANT SAFEGU ARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid.
CA UTION This appliance is for household use only . Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center . Do not immerse machine in water . T o reduce the risk of fire or electric shock, do not disassemble the machine.
2 ENGLISH Congratulations on y our purchase of a Saeco Minuto Classic Milk Frother fully automatic c o ee machine! T o fully bene t from the suppor t that Saeco o ers, please register your product at www .saeco.c om/welc ome . The machine is suitable for preparing espresso co ee using whole co ee beans.
3 ENGLISH C ONTENTS IMPORT ANT ..................................................................................................... 4 Safety Instruc tions ...............................................................................................
4 ENGLISH IMPORT ANT Safety Instructions This machine is equipped with safety devices . Nevertheless, read and follo w the safety instruc tions carefully and only use the machine properly as described in these instructions to av oid accidental injury or damage due to improper use of the machine.
5 ENGLISH 5 - before cleaning the machine . • Pull on the mains plug , not on the power cor d. • Do not touch the mains plug with wet hands . • Do not use the machine if the mains plug, the po wer c ord or the machine itself is damaged. • Do not make any modi cations to the machine or its pow er cor d.
6 ENGLISH shops, o ces , factories or other work envir onments . • Alwa ys put the machine on a at and stable sur face. • Do not place the machine on hot sur faces, dir ectly nex t to a hot ov en, heater units or similar sour ces of heat. • Only put roasted c o ee beans int o the co ee bean hopper .
7 ENGLISH 7 Disposal This symbol on a pr oduct indicates that the pr oduc t is cover ed by EU Directive 2012/19/EU . Please inform yourself about the local separat e collection system for electrical and elec tronic products. F ollow local regulations and do not dispose of the product as household waste .
8 INST ALLA TION Product Overview 24 25 26 27 30 31 28 33 32 29 34 35 23 21 14 15 19 18 22 12 9 10 11 13 3 4 5 6 7 8 16 17 20 12.
9 ENGLISH 9 General Description 1. Grinder adjustment knob 2. Co ee bean hopper 3. Co ee bean hopper lid 4. Control panel 5. Co ee dispensing spout 6. F ull drip tray indicator 7. Cup holder grill 8. Drip tray 9. W ater tank + Lid 10. Co ee grounds drawer 11.
10 ENGLISH PREP ARING FOR USE Machine Packaging The original packaging has been designed and constructed to protect the machine during transport. W e recommend keeping the packaging material for possible future transport. Machine Installation 1 Remove the machine from the packaging .
11 ENGLISH 11 8 Slowly pour the co ee beans into the co ee bean hopper. Note: Do not pour too many co ee beans into the co ee bean hopper as this will reduce the grinding performance of the machine. Caution: Only co ee beans must be put into the co ee bean hopper .
12 ENGLISH 12 Switch the pow er button to “I” . The " " button ashes. 13 T o turn on the machine, simply press the " " button.
13 ENGLISH 13 3 Thereafter , the machine warms up; the “ ” and “ ” buttons ash simultaneously . Automatic Rinse/Self-Cleaning Cy cle When the warm-up phase has been completed, the machine automatically per forms a rinse/self-cleaning cycle of the internal circuits with fresh water .
14 ENGLISH Manual Rinse Cy cle During this process, the c o ee brewing cycle is activated and fresh water ows through the water cir cuit. This takes a few minut es. 1 Place a container under the co ee dispensing spout. 2 Check that the " ", " ", “ ” and " " butt ons are shining steadily .
15 ENGLISH 15 5 Press the “ ” button to star t dispensing hot water . The butt on ashes during dispensing. 6 Dispense all the remaining water . The “ ” light shines steadily . Note: If you want to interrupt the manual rinse cycle (for example to empty the container), press the “ ” button; to resume press the “ ” button again.
16 ENGLISH Measuring and Progr amming W ater Hardness W ater hardness measuring is very important in order to de ne the descal- ing frequency and to install the “INTENZA+” water lter (for more details on the water lter , see next chapter).
17 ENGLISH 17 “INTENZA+” W ater Filter Installation W e recommend you to install the “INTENZA+” water lter as this prevents limescale build-up in your machine and preserves a more intense ar oma of your co ee. The “INTENZA+” water lter can be purchased separately .
18 ENGLISH 4 Put the “INTENZA+” water lter into the empty water tank . Press it down until it cannot move an y further . 5 Fill the wat er tank with fresh water and put it into the machine. 6 Check that the " ", " ", “ ” and " " buttons are shining steadily .
19 ENGLISH 19 ADJUSTMENTS The machine allows f or certain adjustments so that you can brew the best tasting co ee possible. Saeco Adapting S ystem Co ee is a natural product and its characteristics may change according to its origin, blend and roast.
20 ENGLISH 2 While the machine grinds co ee, press and turn the grinder adjust- ment knob placed inside the co ee bean hopper one notch at a time. Use the special co ee grinder adjustment key supplied. Y ou will taste the di erence after brewing 2-3 cups of co ee.
21 ENGLISH 21 The recommended positions ar e: F or the use of small cups; F or the use of large cups. T wo cups can also be placed under the co ee dispensing spout to brew two cups of espresso or two cups of long co ee at the same time.
22 ENGLISH Adjusting the C o ee Length The machine allows y ou to adjust the amount of brewed co ee according to your taste and the size of y our cups. Each time the “ ” or “ ” button is pressed, the machine br ews a pre-set amount of co ee.
23 ENGLISH 23 BREWING ESPRESSO AND C OFFEE Before br ewing co ee, make sure that there are no warnings shown on the control panel, and that the wat er tank and co ee bean hopper are lled. The " ", " ", “ ” and " " buttons are shining steadily .
24 ENGLISH FRO THING MILK / BREWING CAPPUC CINO Fr othing milk W arning: Danger of scalding! Dispensing may be prec eded by small jets of hot water . The Classic Milk F rother may reach high temper atures. Ne ver touch it with bare hands. U se the appropriate protective handle only .
25 ENGLISH 25 6 Fr oth milk by gently swirling the container and moving it up and down. 7 Press the “ ” button to stop dispensing steam. Note: It will take a few seconds before the machine st ops dispensing steam completely . Note: Steam dispensing stops after 3 minutes.
26 ENGLISH HO T W A TER DISPENSING W arning: Danger of scalding! Dispensing may be prec eded by small jets of hot water . Use the appropriate protective handle only . Before dispensing hot water , make sure that the machine is ready to use and the water tank is lled.
27 ENGLISH 27 CLEANING AND MAINTENANCE Daily Cleaning of the Machine Caution: Timely cleaning and maintenanc e of your machine is v ery impor tant as it prolongs the life of y our machine.
28 ENGLISH 4 Inser t the co ee grounds drawer back into the drip tray and place the drip tray back into the machine. Daily Cleaning of the W ater T ank 1 Remove the small white lter or the “INTENZA+” water lter (if in- stalled) from the water tank and wash it with fresh wat er .
29 ENGLISH 29 Daily Cleaning of the Classic Milk Frother F or hygienic r easons and to ensure a perfect milk froth consistency, it is important that you clean the Classic Milk Frother after each use. After frothing milk, a small quantity of hot water must be dispensed into a container .
30 ENGLISH 2 Remove the upper part of the Classic Milk Frother from the st eam/hot water wand. 3 W ash the upper part of the Classic M ilk Frother with fr esh water . 4 Clean the steam/hot water wand of the Classic Milk Fr other with a wet cloth to remov e milk residues.
31 ENGLISH 31 5 Clean the co ee outlet duc t thoroughly with a spoon handle or with another round-tipped kitchen utensil. 7 Thoroughly wash the brew g roup with fresh, lukewarm water and car e - fully clean the upper lter . Caution: Do not use detergent or soap to clean the brew gr oup .
32 ENGLISH 10 Make sure that the brew gr oup is in the o position; the two refer ence marks must match. If they do no match, proceed as described in step (11). 11 Gently pull down the lever until it is in contact with the brew gr oup base and the two refer ence marks on the side of the brew gr oup match.
33 ENGLISH 33 16 Inser t the co ee grounds drawer with the drip tray back into the ma- chine and close the service door . 15 Inser t the brew group back into its seat until it locks int o place without pressing the “PUSH” button. 14 Inser t the co ee residues drawer in its seat and ensure that it is cor- rectly in place.
34 ENGLISH Monthly Lubrication of the Br ew Group Lubricate the br ew group after appro ximately 500 cups of co ee or once a month. The grease to lubricat e the brew group can be pur chased separately . F or further details, please refer to the maintenance pr oducts page in this user manual.
35 ENGLISH 35 3 Inser t the brew group into its seat until it locks int o place (see the “Weekly Cleaning of the Brew Group ” chapter). 4 Inser t the co ee grounds drawer into the drip tray , then inser t both back into the machine and close the service door .
36 ENGLISH DESCALING When the "CAL C CLEAN" button shines steadily , you need to descale the machine. The descaling cycle takes approx. 30 minutes . Caution: Not doing this will ultimately make y our machine stop working properly . In this case, repair is NO T cov ered by warr anty .
37 ENGLISH 37 2 Remove the Classic Milk F rother from the steam/hot water wand . 3 Remove the water tank and the “INTENZA+” water lter from the water tank (if it was installed), replacing it with the small white original one . 4 Pour all the descaling solution int o the water tank.
38 ENGLISH 8 The " " light shines steadily . The machine will star t dispensing the descaling solution at regular intervals for appro ximately 20 minutes. Note: The descaling cycle may be paused by pressing the “ ” button . This allows y ou to empty the container or to leave the machine unattended for a short time.
39 ENGLISH 39 14 At the end of the rinse cycle, the " " button turns o . 13 The “ ” light shines steadily . When the " " button ashes, press it to start the rinse c ycle. Note: The rinse cycle may be paused by pressing the “ ” button.
40 ENGLISH 16 Empty the container used. 17 Empty the drip tray and place it back. 19 Put back the Classic Milk Fr other . 18 Remove the small white lter and place back the “INTENZA+” water lter into the water tank if it was installed. Rinse the water tank and ll it with fresh water up to the M AX level.
41 ENGLISH 41 21 The machine is ready f or use. The " ", " ", “ ” and buttons are shining steadily . 20 Clean the brew group . For more details, please see the “Weekly Clean- ing of the Brew Group ” chapter .
42 ENGLISH INTERRUPTION OF THE DESCALING CY CLE Once you hav e started the descaling c ycle, you must c omplete it till the very end without turning o the machine. In case you get stuck during the descaling procedure , you can exit by un- plugging the power cor d.
43 ENGLISH 43 5 Empty the drip tray and place it back. 6 Empty the container and place it back. 7 Press the “ ” button to dispense 500 ml of water . The “ ” button ashes. 8 T o stop dispensing water , press the “ ” button. Empty the container .
44 ENGLISH 10 Press the “ ” button to brew a co ee. 11 Repeat steps 9 – 10; then continue with step 12. 12 Empty the container . The machine is r eady for use. Note: if the “ ” orange light does not turn o , you still have to descale your machine at your earliest conv enience.
45 ENGLISH 45 C ONTROL P ANEL W ARNINGS W arning signals Flashing The machine is performing one of the following operations: - W arm-up - Automatic rinse . “ ” steady on " " and " " ashing The machine needs to prime the circuit.
46 ENGLISH W arning signals Quick double ashing The machine is brewing two cups of co ee. Flashing quickly The machine is programming the amount of espr esso to be brewed . Flashing quickly The machine is programming the amount of co ee to be brewed .
47 ENGLISH 47 W arning signals Steady on Completely insert the drip tray with the co ee grounds drawer into the machine and close the service door . Flashing quickly The brew gr oup is being reset due to machine reset. Flashing slowly Inser t the brew group .
48 ENGLISH W arning signals Steady on Y ou need to descale the machine. F ollow the steps de- scribed in the “Descaling” chapter of this manual. Please note that not descaling your machine will ultimately make it stop working properly . I n this case repair is NOT cover ed under your warranty .
49 ENGLISH 49 TROUBLESHOOTING This chapter summarizes the most common pr oblems you could encoun- ter with your machine. If you are unable to solve the pr oblem with the information below , visit ww w .saeco .com/suppor t for a list of frequently asked questions or con- tact the Philips Saeco hotline in your country.
50 ENGLISH Machine actions Causes Solutions The machine grinds the co ee beans but no co ee is brewed (see note)*. The brew gr oup is dirt y . Clean the brew group (see the "Weekly Cleaning of the Brew Group" chapter). This might occur when the ma- chine is automatically adjusting the dose.
51 ENGLISH 51 ENERGY SA VING Stand-by The Saeco fully automatic espresso c o ee machine is designed for energy saving, as pr oven by the Class A ener gy label. After 30 minutes of inactivity, the machine turns o automatically. If a product has been brewed, the machine performs a rinse cycle.
52 ENGLISH TECHNICAL SPECIFICA TIONS The manufacturer reserves the right to make changes to the technical speci cations of the product. Nominal V oltage - Po wer Rating - Pow er Supply See data plate on the inside of the service door Housing material Thermoplastic material Size (w x h x d) 215 x 330 x 429 mm / 8.
53 ENGLISH 53 ORDERING MAINTENANCE PRODUCTS F or cleaning and descaling, use Saeco maintenance pr oducts only . Y ou can purchase these products at the Philips online shop (if available in your country) at w ww.shop .philips.com/service , from your local dealer or at authorised service centres.
54 ENGLISH - Maintenance Kit CA 6706 - Cleaning brush HD5084.
.
.
.
www .saeco .com/welcome The manufacturer reserves the right to make changes without prior notice. Rev .00 del 30-12-14 02 EN 02.
Ein wichtiger Punkt beim Kauf des Geräts Philips Saeco HD8661 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Philips Saeco HD8661 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Philips Saeco HD8661 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Philips Saeco HD8661 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Philips Saeco HD8661 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Philips Saeco HD8661 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Philips Saeco HD8661 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Philips Saeco HD8661. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Philips Saeco HD8661 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
