Benutzeranleitung / Produktwartung 10/100Mbps des Produzenten Atlantis Land
Zur Seite of 37
16 ports 10/100Mbps Fats Ethernet Switch Layer 2 with 1 optional port 100Base-FX Fiber Module USER’S GUIDE.
.
The Atlantis Land logo is a registered trademark of Atlants Land SpA. All other names me ntioned mat be trademarks or registered trademarks of their respective ow ners. Subject to change without notice. No liability for techni cal errors and/or omissions.
UL Warning a) Elevated Operating Ambient Temperature- If installed in a closed or multi-unit rack assembly, the opera ting ambient temperature of the rack environm ent may be greater than room am bient.
attention should be give n to supply connections other than direct connecti ons to the branch circuit (e.g., use of power strips)..
T ABLE OF C ONTENTS ABOUT THIS GUIDE......... ...................................................... ............. 1 P URPOSE ............................................................... ..................... ................ 1 T ERMS /U SAGE .....
L OGIN ................ ...................................................... .................. .............. 17 M AIN M ENU ..................... ......................................................... .............. 18 C ONFIGURING S ETUP S ETTING .
1 A BOUT T HIS G UIDE Congratulations on y our purch ase of the 16-Port 10/100Mbps Fast Ethernet Sm art Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabiliti es in a highly flexible package. Purpose This guide discusses how to install y our 16-Port 10/100Mbps Fast Ethernet Sm art Switch.
3 I NTRODUCTION This chapter describes the feat ures of the 16-Port 10/100Mbps Fast Ethernet Smart Switch and some background information about Ethern et/Fast Ethernet and Switching technology.
4 the existing investment in hardware, software, and personnel training. Switchi ng Technol ogy Another approach to pushing be y ond the limits of Ethernet technology is the deve lopment of switching technology.
5 networks, but the cost of a router, the setup a nd maintenance required make routers relatively impractical. Today switch es are an ideal solution to most kinds of local area network congestion problems.
6 Features 16×10/100Mbps Auto-negotia tion Ethernet p orts All ports support auto MDI/ MDIX, so there is no need to use cross-over cab les or an up -link p ort Full/half dup lex trans fer.
7 Standard 19” Rack-mount size U NPACKING AND I NSTAL LATION This chapter provides unpacking and setup information for the Switc h. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents.
8 Installation The site where you install the hub stack may greatly affect its performance. When installing, consider the following pointers: Install the Sw itch in a fair ly cool and dr y place. See Technical Specifications for the accep table temperatu re and humidity oper ating range s.
9 Rack Mount ing The switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment. Attach the mounting brackets at the switch’s front panel ( one on each s ide), and secure them with the provided screws.
10 1 6 - P o r t 1 0 / 1 0 0 M b p s E t h e r n e t S m a r t S w i t c h S Y S T E M F D X P O W E R L i n k / A C T F X Figure 2. Mount t he Switch in the rack Connecting Net work Cable The Switch supports 10M bps Ethernet or 100Mbps Fast Ethernet and it runs both in half and full duplex mode.
11 automatically and may be turned on without having any or all LAN segment cables conne cted. I DENTIFYING E XTERNAL C OMPONENTS This chapter describes the front panel, rear panel, and LED indicators of the Switch. Fron t Panel The figure below shows the front panels of the Switch.
12 Console Port An RS-232 DCE console port is set up and managed the switch via a connection to a consol e terminal or PC using a terminal emulation program. Rear Panel A C Power Conn ector Figure 4. Rear panel of the Switch AC Power Connector This is a three-pronged connector that supports the power cord.
13 U NDERSTANDING LED I NDICATORS The front panel LEDs provides inst ant status feedback, and help monitor and troubleshoot when needed. 1 POWER SYSTEM 2 3 4 5 6 7 8 9 1 0 1 11 21 31 41 5 1 6 16-Por t 10/100M bps E thernet Smart Sw itch Link/ACT FDX FX Figure 5.
14 Ports 1~16 Status LEDs Link/ACT On : When the Link/ACT LED light s on, the respective port is successfully connected to an Ethernet network. Blinking : When t he Link/ACT LED is bl inking, the port is transmitting or recei ving data on the Et hernet network.
15 C ONFIGURATION This Switch is an unm anaged , but “smart” Sw itch because programmable administra tion parameters make the Switch operate m o re effectively than unmanaged (dumb) switch es. This chapter will describe how to configure the Switch.
16 Configuring t he Switch The 16-Port 10/100Mbps Fast Et hernet Smart Switch has a menu-driven console interface for smart s witch configuration. The Swit ch can be configured through the serial port. A network administrator can manage, control and m onitor the switch from the console program.
17 Login First execute the terminal em ulation program on the remote workstation, and turn on the Switch. When login to the Switch, the follow ing screen (Figure 10) prompt: Password: Figure 10. Login Input the password in the blank, and then press Enter to login Main Menu.
18 Main Menu The main menu appears, as show n in Figure 11. Find the console keys in the lower part of the screen. Move to highlight a desired option by using Up Arrow , Down Arrow and Tab ke ys, and then press Enter key to confirm. There are four options: Setup, System, File, and Statistic s, shown in the Main Menu screen.
19 Configuring Set up Setting Find that there are two items, in cluding Port Configuration and VLAN in Setup menu, shown as Figure 12. Figure 12. Setup M enu Port Configur ation In Port Configuration menu (F igure 13), eac h port’s (port 17: Fiber Port) Spee d, Flow C ontrol, and QoS can be controlled.
20 Figure 13. Por t Configuration (1) Spee d There are five modes— Auto , 100M Full , 100M Half , 10M Full , and 10M Half —for speed selections . To change the speed setting, highlight Port and en.
21 (3) QoS If some ports need to have th e priori ty to manage the data transfer, QoS should be change. QoS has two functions to alter, High and Low . The default settings of all ports’ QoS are High . To change the QoS setting, hi ghlight Port and enter the port number to select the de sired port.
22 Figure 14. VLAN Configuration For example, there are five co mputers (PC1~PC5) connected to the Switch’s port 1~5. They ha d been divided into two VLAN groups: VLAN1 (PC1~PC4) and VL AN2 (PC2~PC5). There is no way to connect PC1 and PC5 shown as Figure 15.
23 divided into two VLAN grou ps. Both VLAN groups are independent and there’s no li nk between these VLAN groups. The Switch can be regarded a s two smalle r switches.
24 Figure 17. System Setting Configuring Fil e Sett ing The Switch can be uploaded or downloaded its conf iguration files by using the File scr een shown in Figure 18. Upload Configuration : Select this for back up a file the setting from the device.
25 Figure 18. File installation Statistics Statistics M enu In the Statistics menu screen (shown Figure 19), all ports’ transferring (Tx) and receiving (Rx) status summ aries can be viewed.
26 Figure 19. Statistics Statistics Detail Highlight Port and enter port numbe r to view the statistics details (see Figure 20)..
27 Figure 20. Statistics Detail.
28 T ECHNICAL S PE CIFICATIONS General Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100 BASE- TX, 100BASE-FX Fast Ethernet Protocol CSMA/CD Data Ethernet: 10M bps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100M bps (half duplex), 200Mbps (full duplex) Topology Star Network Media 10BASE-T: 2-pair UTP/STP Ca t.
29 Number of 16 × 10/100Mbps Auto-M DIX STP ports 1 × expansion slot for 100BASE- FX fiber m odule Physical and Environmental.
30 AC inputs: 100~240V AC, 50/60 Hz internal universal power supply Power Consumption: 12 watts. ( max.) Temperature: Operating: 0 ° ~40 ° C, Storage: -10 ° ~70 ° C Humidity: Operating: 10%~90% RH, Storage: 5%~90% RH Dime nsions: 440 x 140 x 44 m m (W x H x D) Weight: 2.
31 Product Support If you continue to have problem s y ou should contact the dealer where you bought this produc t. If you have any other questions you can c ontact the Atlantis Land company directly .
Ein wichtiger Punkt beim Kauf des Geräts Atlantis Land 10/100Mbps (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Atlantis Land 10/100Mbps noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Atlantis Land 10/100Mbps - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Atlantis Land 10/100Mbps reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Atlantis Land 10/100Mbps erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Atlantis Land 10/100Mbps besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Atlantis Land 10/100Mbps verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Atlantis Land 10/100Mbps. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Atlantis Land 10/100Mbps gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
