Benutzeranleitung / Produktwartung CL1758M des Produzenten ATEN Technology
Zur Seite of 85
Master View Max Slid eaway™ LCD KVM Switch CL-1758 User Manual www.aten.com.
CL-1758 User Manual ii FCC Information This is an FCC Class A product. In a domestic environment this product may cause radio interference in which cas e the user may be required to tak e adequate measures. This equipment has been test ed and found to comply with the limit s for a Class A digital device, pursuant to Part 15 of the FCC Rules.
CL-1758 User Manual iii User Information Online Registration Be sure to register your product at our online support center: T elephone Suppo rt For telephone support, call this number: User Notice All information, docum entation, and specifications contained in this manual are subject to change without prior no tification by the manufacturer.
CL-1758 User Manual iv Package Content s Basic Package The basic CL-1758 package consists of: 1 CL-1758 KVM Switch with Standard Rack Mounting Kit 2 Custom KVM Cable Sets 1 Firmware Upgrad.
CL-1758 User Manual v Content s FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii RoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CL-1758 User Manual vi OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Hotkey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Hot Plugging .
CL-1758 User Manual vii 8. Appendix Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Rack Mounting .
CL-1758 User Manual viii About this Manual This User Manual is provided to help you get the most from your c/c system. It covers all aspects of installation, confi guratio n and operation. An overview of the information found in the manual is provi ded below.
CL-1758 User Manual ix Conventions This manual uses the following conv entio ns: Product Information For informatio n about all ATEN products and how they can help you co nnect without limits, visit ATEN on the Web o r contact an ATEN Autho rized Reseller.
CL-1758 User Manual x This Page Intentionally Left Blank.
1 Chapter 1 Introduction Overview The Master View CL-1758 KVM Switch is a control un it that allows access to multiple computers from a single keyboard, monitor, and mouse (K VM) console.
CL-1758 User Manual 2 Access to any computer co nnected to the installation is easily accomplished either through a pow erful, mous e driven , OSD (On Screen Display) menu system, or by entering Hotkey combinatio ns from the keyboard.
Chapter 1. Introduction 3 Features Integrated KVM console with 15"or 17" LCD monitor in a Slideaway ™ housing. Slideaway ™ housing is less than 1 U – with top and bo ttom clearance for smooth operation in a 1U high system rack.
CL-1758 User Manual 4 Hardware Requirement s Computers The following equipmen t must be installed on each computer: A VGA, SVGA or Multisync card. Note: The integrated LCD monitor's maxi mum resolution is 1024 x 768 @ 75Hz (15") or 1280 x1024 @ 75 Hz (17").
Chapter 1. Introduction 5 Component s Front View (Continues on next page.) 2 3 6 12 9 10 & 11 1 13 13 7 8 4 & 5.
CL-1758 User Manual 6 (Continued from previous page.) No. Component Descriptio n 1 Handle Pull to slide the KVM module out; push to slide the module in (see item 13 in this table). 2 LCD Display After sliding the KVM module out, flip up the cover to access the LCD monitor .
Chapter 1. Introduction 7 Rear View No. Component Description 1 Power Socket This is a standard 3 prong AC power socket. Th e power cord from an AC source plugs in here. 2 Power Switch 3 External Console Section For flexibility and convenience, the CL-1758 sup ports an independent, external, KVM consol e.
CL-1758 User Manual 8 This Page Intentionally Left Blank.
9 Chapter 2 Hardware Setup Before Y ou Begin 1. Important safety in formation regarding the placement of this device is provided on page 59. Please review it before proceeding. 2. Make sure that the power to any device that you connect to the installation has been turned off.
CL-1758 User Manual 10 St andard Rack Mounting A standard rack mounting kit is prov ided with your CL-1758. The kit enab les the switch t o be mounted in rack with a depth of 4 2.0 - 82.0 cm. Note: It takes two people to m ount the switch: one to hold it in place; the other to screw it in.
Chapter 2. Hardware Setup 11 To rack mount the sw itch, do the following: 1. While one person positions the switch in the rack and hol ds it in place, the second person - using the screws provided with the rack mounting kit - loosely screws the front brackets to the rack.
CL-1758 User Manual 12 Single St age Inst allation To set up a single stage installation, refer to the install ation diagram on the nex t page (the numbers in the diagram corresp ond to the numbers of the installation steps), and do the following: 1.
Chapter 2. Hardware Setup 13 Single St age Insta llation Diagram 3 USB Connection 3 PS/2 Connection 1 2 4.
CL-1758 User Manual 14 T wo St age Inst allation To control even more computers, up to eight additional Master View CS-1758 units can be cascaded from the KVM ports of the First Stage unit. The cascaded Master Views that connect back to the First Stage unit are considered Second Stage units.
Chapter 2. Hardware Setup 15 T wo Stag e Inst allation Diagram Note: The Power On sequence requires that all Second Stage units be powered on first. After all the Second S tage uni ts have been powered on, then the First Stage unit must be powered on next.
CL-1758 User Manual 16 Three St age Inst allation The procedures for setting up a three stage installation are essentially the same as for a two stage instal lation. With a three stag e setup, as many as 512 computers can be controlled in a comp lete installation.
Chapter 2. Hardware Setup 17 Three St age Inst allation Diag ram F/W UPGRADE NORMAL RECOVER F/W UPGRADE NORMAL RECOVER CS-1758 CS-1758 CL-1758.
CL-1758 User Manual 18 This Page Intentionally Left Blank.
19 Chapter 3 Basic Operation Opening the Console The CL-1758's console is located under the top cove r. To access the console, slide the console module out and raise the cover. Note: As a safety precaution, to keep th e console from accidentally s liding out, the console is locked into the In po si tio n.
CL-1758 User Manual 20 Closing the Console To slide the console module back in , close the cover and do the following: 1. Pull the safety catches on the unit's side rails toward you and pu sh the module in unti l it stops. 2. Release the catches; pull the module sli ghtly toward you; then push it all the way in.
Chapter 3. Basic Operation 21 Operating Precautions Right! Rest your hands and arms lightly on the keyboard module as you work. Wro ng ! DO NOT lean your body weight on the keyboard module. DO NOT place heavy objects on the keyboard module. The maximum load bearing capacity of the keybo ard m odu le is 30kg.
CL-1758 User Manual 22 LCD OSD Configuration The LCD Buttons The LCD OSD allows you to set up and configure the LCD display. Four buttons are used to perform the co nfigura tion, as described in the t.
Chapter 3. Basic Operation 23 The Adjustment Settings An explanation of the LCD OSD adjustment settings is given in the table below: Setting Explanation Brightness Adjusts the background bl ack level of the screen image. Contrast Adjusts the foreground white level of the screen image.
CL-1758 User Manual 24 Port Selection CL-1758 installations provide three methods to obtain instant access to any computer in your installation: Manual, On Screen Display (OSD), and Hotkey. Manual For manual port selection on the CL-1758, simp ly press the Port Switch that corresponds to the de vice you wish to access.
Chapter 3. Basic Operation 25 Hot Plugging The CL-1758 support s hot plugg ing - components can be removed and added back into the installati on by unplugging thei r cables from the ports w ithout the need to shut the unit down. In order for hot plugging to work properly, however, the procedures described below must be followed.
CL-1758 User Manual 26 Powering Off and Rest arting If it becomes necessary to Power Off one of the switches, you must do the following before starting it back up: 1.
Chapter 3. Basic Operation 27 Port ID Numbering Each KVM port on a Master View installation is assigned a unique Port ID. You can directly access any computer on any level of the installation by speci.
CL-1758 User Manual 28 This Page Intentionally Left Blank.
29 Chapter 4 OSD Operation OSD Overview The On Screen Display (OSD) is a menu d riven method to han dle computer control and switchi ng operations. All pr ocedures start from the OSD Main Screen. To pop up the Main Screen, tap the OSD key (see p. 71), or tap the [Scroll Lock] key twice.
CL-1758 User Manual 30 When you invoke the OSD, a screen similar to the one below appears: Note: 1. The diagram depicts the Administra tor's Main Screen. The User Main Screen does not show the F4 function, since it is reserved for the Administrator and can't be accessed by ordinary Users.
Chapter 4. OSD Operation 31 OSD Navigation T o dismiss the menu, and d eactivate the OSD, Click the X at the upper right corner of the OSD W indow; or press [Esc] . T o Logout, Click F8 or the Z Z Z symbol at the top of the Main Screen, or press [F8] .
CL-1758 User Manual 32 OSD Functions OSD functions are used to configure an d control the OSD. For example, you can: rapidly switch to any port; scan selected ports only; limit the list you wish to view; designate a port as a Quick Vi ew Port; create or edit a port name; or make OSD setting adjustments.
Chapter 4. OSD Operation 33 F2 LIST Many of the OSD functions only operate on the computers that are listed on the Main Screen. This functi on lets you broa den or narrow the scope of which port s the OSD displays (lists) on the Main Screen.
CL-1758 User Manual 34 F3 SET This function allows the Administrator and each User to set up their own, individual, working environm ent. A sep arate profile for each is stored by the OSD and is activated according to th e Username provided during Login.
Chapter 4. OSD Operation 35 (Continued from previous page.) Setting Function PORT ID DISPLA Y MODE Selects how the Port ID is displayed: the Port Number alone ( PORT NUMBER ); the Port Name alone ( PORT NAME ); or the Port Number plus the Port Name ( PORT NUMBER + PORT NAME ).
CL-1758 User Manual 36 F4 ADM F4 is an Administrator only fun ction. It allows the A dministrator to con figure and control the overall oper ation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to m ove th e highlight bar to it then press [Enter] .
Chapter 4. OSD Operation 37 (Continued from previous page.) (Continues on next page.) Setting Function EDIT PORT NAMES T o help remember which co mputer is attached to a particular port, every port can be given a name. This function allows the Administrator to create, modify , or delete port names.
CL-1758 User Manual 38 (Continued from previous page.) Setting Function SET QUICK VIEW PORTS This function lets the Administrator select which Ports to include as Quick View ports . Note: Only the ports currently chosen for the LIST view on the OSD Main Screen (see F2 LIST , page 33), show up here.
Chapter 4. OSD Operation 39 F7 SCAN This function automatically switches am ong the available computers at regular intervals so that you can monito r their activity witho ut hav ing to take the trouble of switching m a nual ly.
CL-1758 User Manual 40 This Page Intentionally Left Blank.
41 Chapter 5 Keyboard Port Operation The CL-1758 provides an ex tensive, easy-to-use, hotkey funct ion that makes it convenient to cont rol and configure your KVM instal lation from the keyboard. Note: The hotkey function must be enabled to use ho tkey op erations.
CL-1758 User Manual 42 Hotkey Port Access Hotkey Port Access allows you to sel ect which computer has the KVM focus. The CL-1758 provides the following Hotkey Port Access features : Selecting the .
Chapter 5. Keyboard Port Operation 43 Auto Scanning Auto Scanning allows the automatic moni toring of computer activity instead of having to switch manually. In voking Auto Scan Mode causes the CL-1758 to switch the KVM focus among all the active KVM Ports that are accessible to the currently logged on user at regular interval s.
CL-1758 User Manual 44 Hotkey Configuration Hotkeys can also be used to set up the CL-1758's w orking environment, as shown in the sections that follow. Alternate Hotkey Invocation Keys An alternate set of hotkey invocation key s is provided in case the defaul t set conflicts wi th programs running on the computers.
Chapter 5. Keyboard Port Operation 45 Keyboard Operating Plat form The CL-1758's default port configurati on is for a PC Compatible keyboard operating platform. If you have a Mac or a Sun on your installation, you can change its port's keyboard operat ing platform as follow: 1.
CL-1758 User Manual 46 Beeper Control The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the following: 1. Invoke HKM (see p. 41). 2. Press and release the [B] key . The Beeper toggles On or Off. The Command Line disp lays Beeper On or Beeper Off for one second; th en the message disappears and you automatically exit Hotkey Mode.
Chapter 5. Keyboard Port Operation 47 Hotkey Summary T able Note: The brackets indicate the keys you should press. Simply press the indicated keys - do not type the brackets. [Num Lock] + [-] or [Ctrl] + [F12] [Port ID] [Enter] Switches the KVM focus to the computer that corresponds to that Port ID [A] Invokes Auto Scan Mode.
CL-1758 User Manual 48 This Page Intentionally Left Blank.
49 Chapter 6 Keyboard Emulation Mac Keyboard The PC compatible (101/104 key) keyboard can emu late the functions of the Mac keyboard. The emulation mappings are listed in the table below. Note: When using key combinations, press and release the first key (Ctrl), then press and release the activation key .
CL-1758 User Manual 50 Sun Keyboard The PC compatible (101/104 key) keyboard can emul ate the fu ncti ons of the Sun keyboard when t he Control key [Ctrl] is used in conjunction with other keys. The corresponding function s are shown in the table below.
51 Chapter 7 The Firmware Upgrade Utility The Windows-based Firmware Upgrade Uti lit y (FWUpg rade.exe) provides a smooth, automated process for u pgrading the KVM switch's firmware. The Utility comes as part of a Firmware Upgrade Package th at is specific for each device.
CL-1758 User Manual 52 Prep aration To prepare for the firmware upgrade, do the following: 1. From a computer that is not part of you r KVM in stallation go to our Internet support site and choose the model name th at relates to your device to get a list of available Firmware Upgrade Packages.
Chapter 7. The Firmware Upgrade Utility 53 S t arting the Upgrade To upgrade your firmware: 1. Run the downloaded Firmw are Upgrade Package file - either by double clicking the file icon, o r by openin g a command line and entering the full path to it.
CL-1758 User Manual 54 (Continued from previous page.) 3. Click Next to continue. The Firm ware Upgrade Utility main screen appears. The devices capable of being upgra ded are listed in the Device List panel: 4. As you select devices, a detailed description of each appears in the Device Description panel.
Chapter 7. The Firmware Upgrade Utility 55 5. After you have made your device selection(s), Click Next to perform the upgrade. If you enabled Check Firmwar e V ersion , the Utility comp ares the device's firmware level with that of the upgrade files.
CL-1758 User Manual 56 Upgrade Succeeded After the upgrade has completed, a screen appears to info rm you that the procedure was successful: Click Finish to close the Firmwa re Upg rade Ut ili ty. Upgrade Failed If the Upgrade Succeeded sc reen doesn't appear, it means that the upgrade failed to complete successfully.
Chapter 7. The Firmware Upgrade Utility 57 Firmware Upgrade Recovery There are basically three conditions that call for firmware upg rade reco very: When you invoke Firmware Upgrade Mode (see Preparat ion , page 52), but decide not to proceed with the upgrade.
CL-1758 User Manual 58 This Page Intentionally Left Blank.
59 Appendix Safety Instructions General Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the dev ice. Do not place the device on any unstable su rf ace (cart, stand, table, etc.
CL-1758 User Manual 60 (Continued from previous page.) If an extension cord is used with this device make sure that the total of the ampere ratings of all products us ed on this cord does not exceed the extension cord ampere rating. Mak e sure that the total of al l products plugged into the wall outlet does not exceed 15 amperes.
Appendix 61 Rack Mounting Before working on the rack, ma ke su re that the stabilizer s are secured to the rack, extended to the floor , and that the full w eight of the rack rests on the floor . Install front and side stabilizers on a single rack or front stabilizers for joined multiple ra cks before work ing on the rack.
CL-1758 User Manual 62 T echnical Support Technical support is available both by email and on lin e (with a browser over the web): International North America When you contact u s, please have the followin g information ready beforehand: Product model number, serial number , and date of purchase.
Appendix 63 Specifications Function CL1758 Computer Connections Direct 8 Max. 512 (via Cascade CS1758) Port Selection OSD, Hotkey , Pushbutton Connectors Second Console Ports Keyboard 1 x 6 Pin Mini-D.
CL-1758 User Manual 64 Connection T able The following table indicat es th e relationship between the number of Master View Units (CL-1758 + CS-1758) and the number of computers that they control: MVs.
Appendix 65 OSD Factory Default Settings The factory default se ttings are as follows: T roubleshooting Setting Default OSD Hotkey [Scroll Lock] [Scroll Lock] Port ID Display Position Upper Left Corne.
CL-1758 User Manual 66 Clear Login Information If you are unable to perform an Adminis trator login (because the Username and Password information has become corrupted , or you have fo rgotten it, for example), you can clear the login information wit h the fo llo wing procedure: 1.
Appendix 67 Optional Rack Mounting For convenience and flexibili ty, three optional rack mounting kits are available: A long bracket standard rack mount ing kit fo r 68.0 - 1 10.0 cm racks; A short bracket Easy-Installation rack mount kit for 52.
CL-1758 User Manual 68 (Continued from previous page.) 2. Attach the left and right easy-installation moun ting rails to the i nside of the rack. The flange that supports the switch will be to the inside. a) Screw the front flange s to the rack first.
Appendix 69 3. Slide the switch onto the support flanges. Use the screws supplied with this package to loosely attach the front of the switch to the front of the rack (only tighten the screws part way).
CL-1758 User Manual 70 (Continued from previous page.) 5. Slide the switch open and closed a coup le of times to be sure that it is properly aligned and operati ng smoo thly . (See Opening the Console , page 19, and Closing the Console , page 20, for open ing and closing procedures.
Appendix 71 Entering the ok Prompt (Sun Solaris) If you are using a PC keyboard to control a Sun Solaris server and want to use Stop-A keys to enter the ok prompt, do the following: Note: Before entering the ok prompt, consult the server ’ s documentation for any precautionary steps that you should take.
CL-1758 User Manual 72 Limited W arranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILI TY EXCE ED THE PRICE PAID FOR THE PRODUCT FROM DIRE CT, INDIRECT, SPECIAL, I NCIDENTAL, OR CONSEQUENTIAL DAMAGES RESUL TING FRO M THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION.
CL-1758 User Manual 73 Index A Activate Beeper, 37 ADM, 36 Administrator functions, 36 Alternate OSD Keys, 44 Auto Scan Invoking, 43 Pausing, 43 Auto Scanning, 39, 43 Scan Durati on, 35 Stopping, 43 B.
CL-1758 User Manual 74 I Installation Single Stage, 12 Three Stage, 16 Two Stage, 14 Invocation Keys, 71 Invoke firmware upgrade, 38 Invoking Hotkey Mode, 41 K Keyboard Emul ation Mac, 49 Sun, 50 Keyb.
CL-1758 User Manual 75 SET, 34 Logout Timeout, 36 Password, 36 USERNAME, 36 Set Accessible Ports, 38 Set Quick View Ports, 38 SJ/T 11364-2006, ii Skip Mode, 35 Specifications, 63 T Technical Su pport,.
Ein wichtiger Punkt beim Kauf des Geräts ATEN Technology CL1758M (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ATEN Technology CL1758M noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ATEN Technology CL1758M - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ATEN Technology CL1758M reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ATEN Technology CL1758M erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ATEN Technology CL1758M besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ATEN Technology CL1758M verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ATEN Technology CL1758M. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ATEN Technology CL1758M gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
