Benutzeranleitung / Produktwartung E1225B des Produzenten AT&T
Zur Seite of 39
User Manual (P ar t 2) 2.4 GHz Cor dless T elephone/Answ ering System E2725B/E1225B with Caller ID & Call W aiting 91-000153-041-000_E1225B_RO.qxd 2/13/1950 7:21 PM Page 1.
Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. STOP! See page 7 for easy instructions. You must install and charge battery before using the telephone.
1 T ab le of contents Getting Started Quick reference guide ........................2 Parts checklist .......................................4 Before you begin ..................................5 Telephone base installation................6 Battery installation & charging .
2 Getting Started Off/Clear During a call, press to hang up. While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display. Quick r eference guide Redial/Pause Press to view redial memory (see page 10). While entering numbers, press and hold to insert a dialing pause (see page 17).
Answering System Controls (see pages 22-30) ON/OFF ..................Press to turn answering system on or off. DELETE ..................Press to delete message. Hold to delete all old messages. TIME SET ................Press to review or set the answering system clock.
4 Getting Started P ar ts checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service.
5 Getting Started Befor e y ou begin About Caller Identification Caller ID with Call Waiting features in this telephone let you see who’s calling before you answer the phone, even when you’re on another call. These features require services provided by your local telephone company.
NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1-800-222–3111. Be sure to use an electrical outlet not controlled by a wall switch. 6 Getting Started T elephone base installation Install the telephone base as shown below.
7 Getting Started Batter y installation & charging After battery installation, place the handsets in their base unit or charger and allow to charge for 12 hours before use. You can keep the batteries charged by returning the handsets to their base unit or charger after each use.
8 Getting Started W all mounting The base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
9 Getting Started Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset.
10 Telephone Operation Basic operation Making and answering calls To answer an incoming call, press PHONE (or SPEAKER, or any dial pad key). To make a call, press PHONE or SPEAKER , then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first, then press PHONE or SPEAKER to dial.
11 Telephone Operation Options while on calls Volume control Press the VOLUME buttons on the side of the handset to adjust listening volume. Each button press raises or lowers volume by one level. When you change the volume level, the new setting becomes the default.
12 Telephone Operation Inter com calls Intercom calls Use the intercom feature to have conversations between the handsets. Press the INTERCOM button on a handset to initiate an intercom call.
13 Telephone Operation Call F orward and Call T ransfer Call Forward and Call Transfer An external call can be forwarded or transferred from one handset to the other. The difference between for- ward and transfer depends on if the sending handset needs to talk with the receiving handset before the external call is sent to the other handset.
Handset settings At the feature menu you can change settings to customize how the telephone works. Press MENU , then use the ^V buttons to scroll to the feature you want to change. As you scroll through the menu, the top menu item is always highlighted with a > symbol.
15 Telephone Operation Handset settings Handset name At this menu you can customize the name that appears on the handset screen when the phone is idle. Press DELETE to erase letters, then replace them with a name of your preference, up to 16 characters long (see page 17 to enter letters).
16 Phone book Shared phone book directory The phone book directory is stored in the base, and is shared by both handsets. Changes made at either hand- set will be reflected in both. Only one handset at a time can use the phone book. If a second handset attempts to use the phone book, the screen will display NOT AVAILABLE AT THIS TIME .
17 Phone book New phone book entries To create a new phone book entry Press MENU twice to select DIRECTORY . Press V to highlight STORE . Press SELECT , then enter the telephone number when prompted. Use the dial pad to enter up to 32 digits, then press SELECT.
18 Phone book Phone book sear ch Press DIR to display the first listing in the phone book. You can then use the ^ or V to browse through the phone book, or search to find a specific entry. Press OFF at any time to exit the directory. To browse through the directory To browse, press ^ or V to scroll through all entries one by one.
19 Phone book T o dial, chang e or delete entries To dial a number When any phone book entry is displayed, press PHONE (or SPEAKER ) to dial the displayed number. To delete an entry When any phone book entry is displayed, press DELETE to delete the displayed entry from the phone book.
20 Caller ID Logs How Caller ID works If you subscribe to Caller ID service provided by your local phone company, information about each caller will be displayed after the first ring. Information about the last 50 incoming calls is stored in your call log.
21 Caller ID Logs T o r evie w y our call log To review your call log Press CID to review your call log. The most recent call is displayed first. Use the arrow buttons to scroll through the list as shown at left. To return a call Press PHONE (or SPEAKER ) to call the number as displayed.
22 Answering System Operation Message capacity The answering system can record up to 99 messages, depending on the length of each message. Individual messages can be up to four minutes long, but total maximum recording time is 15 minutes. Messages will remain available for replay until you delete them.
23 Answering System Operation Da y and time announcements To set day and time Before playing each message, the answering system announces the day and time the message was received. Before using the answering system, you should follow the steps at left to set the day and time, so messages are dated correctly.
24 Answering System Operation Outgoing announcements Outgoing announcements are the messages callers hear when calls are answered by the answering system. The phone is pre-programmed with an announcement that answers calls with “Hello. Please leave a message after the tone.
25 Answering System Operation Announce Only mode In announce only mode, callers hear an announcement but cannot leave messages. This option is useful, for example, to notify callers that you will be away for an extended period and request that they call back after a certain date.
26 Answering System Operation Changing featur e options Menu features can be changed to customize how the answering system operates. Press MENU repeatedly to hear each feature. Press CHANGE when you hear the feature you want to modify. Feature options (Default settings underlined).
27 Answering System Operation Messag e pla yback Press PLAY/STOP to hear messages. The system announces the number of messages, then begins playback. If you have new messages waiting, you will hear only the new messages (oldest first). If there are no new messages, the system will play back all messages (oldest first).
28 Answering System Operation Recording and pla ying memos Memos are messages you record yourself. They are saved, played back and deleted exactly like incoming messages. You can record a memo as a reminder to yourself, or leave a message for someone else if others in your household use the answering system.
29 Answering System Operation Messag e windo w displa ys The message window usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this window.
30 Answering System Operation 1. Remote access A two digit security code is required to access your answering system from any touch-tone phone. This code is 19 by default; see page 26 to change it. Dial your telephone number from any touch-tone phone.
31 Appendix Scr een icons, indicator lights & tones Handset screen icons & alert tones Speakerphone in use. Ringer off. Battery charging (animated display). Low battery (flashing); place handset in base or charger to recharge. MUTE Microphone is muted.
32 Appendix In case of difficulty If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com , or call 1-800-222–3111. Telephone does not work at all • Make sure battery is installed and charged correctly (see page 7).
33 Appendix Incomplete messages • If a caller leaves a very long message, part of it may be lost when the system disconnects the call after 4 minutes. • If the caller pauses for more than 7 seconds, the system stops recording and disconnects the call.
T echnical specifications RF Frequency Band (Handset to base) 2400 MHz — 2485 MHz Output Power 20 dBm Sensitivity -96 dBm Modulation GFSK RF Frequency Band (Base to handset) 2400 MHz — 2485 MHz Ch.
35 Appendix A AC adapter, 6 Alert tones, 31 Answering calls, 10 Answering system, 22-30 B Battery charging, 7 Battery installation, 7 Belt clip, 9 C Call Forward, 13 Call Transfer, 13 Caller ID, 20 ad.
Appendix Use the wallet card below to help you remember commands to control your answering system from any touch tone telephone. Remote access wallet card Fold here. Cut along dotted line. Action Remote Command Voice help menu ...................... #1 Play messages .
Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 4 AT&T 02/05. 91-000153-041-000 www .telephones.
Ein wichtiger Punkt beim Kauf des Geräts AT&T E1225B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AT&T E1225B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AT&T E1225B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AT&T E1225B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AT&T E1225B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AT&T E1225B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AT&T E1225B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AT&T E1225B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AT&T E1225B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
