Benutzeranleitung / Produktwartung PVD2000 des Produzenten Philco
Zur Seite of 28
Precautions Setup VCR Functions DVD Functions Español Information INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Supplied Accessories AC outlets Plug in 4 5 F rom TV F rom D VD/VCR Please ref er to “Connections” on page 6.
Precautions – 2 – EN Precautions This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to po ssible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Precautions EN – 3 – 1. Read Instructions - All the safety and operating instruc- tions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
Precautions – 4 – EN Symbols Used in This Manual The following symbols appear in some headings in this manual. Location and Handling • Do not stand this unit up vertically. Install this unit in a hori- zontal and stable position. Do not place anything directly on top of this unit.
Precautions EN – 5 – About the Video Cassettes and Discs Playable Discs Unplayable Discs NEVER play back the following discs. Otherwise, malfunction may result! DVD-RAM / DVD-Audio / CD-i / Photo .
Setup – 6 – EN SETUP > QUICK> DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. BITSTREAM Connecting to other equipment (an MD deck or DAT deck etc.
Setup EN – 7 – Admiral: AUX Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93 GE: INPUT, TV/VCR, 00, 90, 91, 92, 93 Hitachi: INPUT, AUX JVC: VIDEO, VIDEO1, VIDEO2, VIDEO3 Kenwood: AUX LXI-Series: 00.
Setup – 8 – EN 1 Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6. 2 Select your language when turning this unit on for the first time. Then press [ B ] to go to next step.
Setup EN – 9 – 6: VIDEO IN jack Connect a cable coming from the video out jack of a camcorder, another VCR or an audio-visual source (laser disc player, video disc player, etc.) here. 7: DVD/VCR VIDEO OUT jack Connect the supplied video cable here through the video in jack of a television.
Setup – 10 – EN ST ANDBY -ON DISPLA Y VCR DVD PA USE SLOW VCR/TV SKIP/CH. PLA Y STOP RECORD MENU SETUP TOP MENU MODE ZOOM SUBTITLE T- S E T ANGLE ENTER RETURN SEARCH MODE REPEA T A-B OPEN/CLOSE /EJECT SPEED AUDIO CLEAR/ C.
VCR Functions EN – 11 – 1 Press [SEARCH MODE] once. 2 To select Index Mark 3 4 After searching, it automatically starts playback. 1 Press [SEARCH MODE] twice. 2 Select the desired length of time for fast forwarding or rewinding. 3 4 After searching, it automatically starts playback.
VCR Functions – 12 – EN 1 Press [MENU] , then select “TIMER PROGRAMMING”. 2 Select an empty program number. Then press [ B ] to go to next step. 3 Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”. Then press [ B ] to go to next step. 2 Press [ B ] for “AUTO REPEAT”, “ON” or “OFF”.
VCR Functions EN – 13 – 10 Press [SUBTITLE/T-SET] to set timer standby mode. • TIMER indicator on the front panel lights up. The unit will change to the DVD mode. 6 Select “AM” or “PM”. Then press [ B ] to go to next step. 7 Repeat the procedure in steps 5 and 6 to set the end time.
VCR Functions – 14 – EN Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. DIGITAL AUDIO OUT COAXIAL ANT -OUT ANT -IN AUDI O OUT DVD DVD/VCR VCR .
DVD Functions EN – 15 – Hint • Zooming function does not work while the disc menu is displayed. • x4 zoom is not available on some discs. • The picture may be distorted when you press [PAUSE k ] or [ h ] repeatedly in the zoom mode. • In the zoom mode, it automatically changes x2(x4) to the zoomed position guide.
DVD Functions – 16 – EN 1 When selecting the folder: 2 To cancel MP3 playback, press [STOP C ] . DV DV D STOP Insert an MP3-format disc, then the file list will automatically appear on the TV screen. Press [MENU] when you want to call up the file list if MP3-format disc is already inserted.
DVD Functions EN – 17 – 1 Press [RETURN ]. 1 Press [SEARCH MODE] repeatedly until the marker display appears. 2 Select the marker. 3 Press [ENTER] at the desired marker. 1 Press [SKIP/CH. G / o , H / p ] during playback. 1 Press [SEARCH MODE] repeatedly until the marker display appears.
DVD Functions – 18 – EN 1 Press [MODE] once. 2 Using [ K / L ] to select desired track. Press [ENTER] . 3 Press [PLAY B ] to start Programmed Playback. 1 Press [MODE] twice. 2 Press [PLAY B ] to start Random Playback . 1 Press [A-B] at your desired starting point (A).
DVD Functions EN – 19 – 1 Press [MODE] during playback. 2 Press [ENTER] to adjust the black level. 3 Press [RETURN ] to exit. RETURN 1 Press [MODE] twice (once for Audio CD and MP3) during playback. 2 Press [ENTER] for the desired effect. 3 Press [RETURN ] to exit.
DVD Functions – 20 – EN 2 Select “CUSTOM”. DVD Setup DV DV D Hint *1 • Language options are not available with some discs. • If OTHER is selected on the AUDIO, SUBTITLE or DISC MENU screen, press four-digit number to enter the code for the desired language.
DVD Functions EN – 21 – DISPLAY Setting You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20. B AUDIO Setting Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs.
DVD Functions – 22 – EN CONTROL LEVELS • ALL: All parental locks are canceled. • Level 8: DVD software of any grades (adult/general/children) can be played back. • Levels 7 to 2: Only DVD software intended for general use and children can be played back.
Information EN – 23 – Troubleshooting Guide If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist. • Some functions are not available in specific modes, but this is not a malfunction.
Information – 24 – EN Language Code List Specifications A-B Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 .
Español ✄ – 25 – ES 1 • Si no se ha ajustado el reloj, aparece la pantalla AJUSTE DE RELOJ cuando pulse [MENU] . En este caso, vaya al paso 2. 2 Seleccione el mes actual. 3 Seleccione el dia actual. 4 Seleccione el año actual. 5 Seleccione la hora actual.
Español ✄ – 26 – ES Reproducción de la grabadora de vídeo Reproducción de DVD/ CD 7 Control remoto 8 Antes: Encienda el televisor y cambie al canal 3. • Si el canal 3 se está utilizando para una transmisión, vea la sección “Canal de salida RF”.
✄ EN – 27 – 1 Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section. 2 Select your language in the first time you turn on this unit. Then press [ B ] to go to next step.
✄ VCR Playback DVD/CD Playback 7 Remote Control 8 Before: Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section. 2 4 PLA Y STOP OPEN/CLOSE /EJECT Before: Turn on the TV, amplifier and any other components which are connected to this unit.
Ein wichtiger Punkt beim Kauf des Geräts Philco PVD2000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Philco PVD2000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Philco PVD2000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Philco PVD2000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Philco PVD2000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Philco PVD2000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Philco PVD2000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Philco PVD2000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Philco PVD2000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
