Benutzeranleitung / Produktwartung PMCP660 des Produzenten Pelco
Zur Seite of 40
600 Series Flat Panel Plasma Monitors INSTALLATION/OPERATION C2938M (12/06).
.
C2938M (12/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Regulatory Notices .
4 C2938M (12/06) List of Illustrations 1 Parts List Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C2938M (12/06) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
6 C2938M (12/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C2938M (12/06) 7 Description The 600 Series high performance plasma monitors are designed to fit the specific needs of the security industry . The plasma monitors work well using the VGA output of a Pelco ® DVR or the DVI output of an Endura ™ system.
8 C2938M (12/06) Installation The monitor can be placed on any flat surface (desk or table), or it can be wall mounted. Y ou can remove the desktop stand by removing the screws that secure it to the monitor . NOTE: Only use a recommended wall mount kit, such as the PMCP-WM, PMCP-WMT , or PMCP-WM60.
C2938M (12/06) 9 1. External Speaker Output: Line-out connections to a pair of amplified speakers or amplifier . 2. RS-232 Connector: For authorized service use. 3. DVI Input: Connection to digital video signals from a computer or any Pelco device with DVI output, especially PMVC4 and PMVR2 multiviewers.
10 C2938M (12/06) V IDEO AND AUDIO CONNECTIONS CONNECTING S-VIDEO INPUT Refer to Figure 3. T o use S-Video input, do the following: 1. Connect the external device’ s S-V ideo (4-pin DIN) connector to the monitor’ s S-VIDEO INPUT connector .
C2938M (12/06) 11 CONNECTING VIDEO INPUT Refer to Figure 5. T o use video input, do the following: 1. Connect the external device’ s jack to the monitor’ s VIDEO INPUT jack. 2. Connect the device’ s red (R) and white (L) audio jacks to the monitor’ s R and L audio-in jacks of the Video Input.
12 C2938M (12/06) CONNECTING DVI INPUT Refer to Figure 7. T o use DVI (Digital Video Interface) input, do the following: 1. Connect the DVI-jack of the Pelco multiviewer , Endura, or computer to the monitor’ s DVI input jack.
C2938M (12/06) 13 PC CONNECTIONS USING RGB (VGA) OR DVI VIDEO INPUT Refer to Figure 13. 1. Connect the PC’ s 15-pin D-Sub RGB (VGA) connector to the monitor’ s RGB-IN connector . If you have a PC that is equipped with a DVI, you can connect the PC DVI connector from the PC to the monitor’ s DVI-IN connecto r.
14 C2938M (12/06) SETTING UP Y OUR PC IN WINDOWS FOR USE WITH MONITOR USING A VGA CONNECTOR The display settings for a typical Windows ® -based computer are shown below . However , the actual screen on your computer will differ depending on the Windows version and video card in the computer .
C2938M (12/06) 15 5. If a vertical-frequency option is available, set the value to 60 Hz (refer to Figure 12). Figure 12. Plug and Play Screen 6. Click OK to complete the setting. NOTE: Both screen position and size will vary depending on the type of PC graphics card and its selected resolution.
16 C2938M (12/06) Operation FRONT PANEL CONTROLS The following apply to all models. 1. INPUT : Switches between available inputs. 2. MENU: Engages the OSD (on-screen display) menu. 3. VOL: Adjusts volume up and down. These buttons also serve as navigation and adjustment keys when the OSD menu is engaged.
C2938M (12/06) 17 INSTALLING REMOTE CONTROL BATTERIES Figure 15. Battery Installation Refer to Figure 15 for the following procedure. 1. Open and remove the battery cover on the back of the remote control. 2. Install two AAA size 1.5 V batteries (supplied).
18 C2938M (12/06) REMOTE CONTROL FUNCTIONS Figure 16. Remote Control Functions 1. MUTE: T urns on/off sound. 2. POWER: Switches the monitor from standby mode to on, and back to standby mode. 3. LOCA TE: Selects a location for the subpicture. Available in PIP (picture-in-picture) mode only .
C2938M (12/06) 19 6. A.SWAP: Selects audio for the main or subpicture. Available in PIP and PBP modes only . 7. SPLIT : Selects a PIP mode (NORMAL, PIP , PBP). 8. S.SELECT : Selects the main picture or subpicture. Then you can adjust the status of the selected picture.
20 C2938M (12/06) BASIC FUNCTIONS POWERING ON/OFF Make sure the monitor is plugged into the wall outlet with the supplied power cord. The ST A TUS LED on the control panel will glow red. 1. Press the on/off button on the front panel or the POWER button on the remote control.
C2938M (12/06) 21 ADVANCED FUNCTIONS ADJUSTING PICTURE SETTINGS Y ou can make various picture adjustments by using the Picture Adjustment OSD menu. 1. Press the MENU button on the front panel or the remote control. The program displays the Image menu.
22 C2938M (12/06) RESETTING PICTURE TO FACTORY DEFAULTS 1. In the Image Menu, press the button to select Video Defaults (refer to Figure 20). 2. Press the VOL+ or VOL- button to reset the picture settings to the factory defaults.
C2938M (12/06) 23 RESETTING SOUND TO FACTORY DEFAULTS 1. Press the button to select Audio Defaults. 2. Press the VOL+ or VOL- button to reset the audio settings to the factory defaults (refer to Figure 22). Figure 22. Sound Defaults SELECTING LANGUAGE The monitor has multiple OSD Menu languages built in.
24 C2938M (12/06) ADJUSTING COLOR T EMPERATURE Y ou can change the color temperature (Kelvin) of the entire screen to suit your requirements. 1. Press the MENU button on the front panel or the remote control. 2. Press the VOL+ or VOL- button to select Setup.
C2938M (12/06) 25 MINIMIZING SCREEN STICKING USING PIXEL SHIFT A difference in brightness can occur around dark or bright areas. This is due to deterioration in the fluorescent substance used in the plasma display if a fixed pattern is displayed for a long period of time; this is image sticking.
26 C2938M (12/06) SELECTING ON-SCREEN DISPLAY T IMEOUT Y ou can choose how long the OSD will be shown. 1. Press the MENU button on the front panel or the remote control. 2. Press the VOL+ or VOL- button to select Setup. 3. Press the button to enter the selected menu group (refer to Figure 28).
C2938M (12/06) 27 CHANGING SCREEN SIZE Y ou can select the screen size that best corresponds to your viewing requirements. 1. Press the MENU button on the front panel or the remote control. 2. Press the VOL+ or VOL- button to select Screen. 3. Press the button to enter the selected menu group.
28 C2938M (12/06) SETTING UP RGB INPUT RGB Mode Preset Y ou can access the RGB mode preset by pressing the INPUT button, as follows: 1. Press the MENU button on the front panel or the remote control. 2. Press the VOL+ or VOL- button to select Screen. 3.
C2938M (12/06) 29 VIEWING PIP Y ou can control PIP (picture-in-picture), as follows: Select PIP Mode Press SPLIT on the remote control repeatedly to select the desired mode (refer to Figure 33). Available modes are displayed in the following order: NORMAL>PIP>PBP .
30 C2938M (12/06) Swap PIP Y ou can swap the main picture and PIP by pressing the SWAP button (available in PIP and PBP mode only). The two pictures are interchanged. Swap Audio Y ou can alternate between the main or PIP audio by pressing the A.SWAP (audio swap) button.
C2938M (12/06) 31 INFORMATION This screen displays information about Pelco headquarters. 1. Press the MENU button on the front panel or remote control.
32 C2938M (12/06) Maintenance If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and cable runs. CLEANING CAUTION Keep your hands, face, and objects away from the display’ s ventilation holes.
C2938M (12/06) 33 PICTURE IS DISTORED WITH ABNORMAL PATTERNS • Possible cause: The signal cable is not connected properly . Remedy: Make sure the signal cable is attached firmly to the back of the monitor , and from the source. • Possible cause: The input signal is beyond the monitor’ s capabilities.
34 C2938M (12/06) Supported Input Modes * PMCP660 cannot support this resolution. ** PMCP642 cannot support this resolution. PMCP660 cannot support this resolution in DVI mode. *** PMCP642 cannot support this resolution. Mode Resolution H Freq. (kHz) V Freq.
C2938M (12/06) 35 Specifications MODELS PMCP642 42-inch (1,067 mm) plasma monitor PMCP650 50-inch (1,270 mm) plasma monitor PMCP660 60-inch (1,524 mm) plasma monitor GENERAL Native Resolution PMCP642.
36 C2938M (12/06) PHYSICAL Dimensions (without stand) PMCP642 4.2" D x 40.5" W x 24.6" H (10.7 x 102.8 x 62.5 cm) PMCP650 4.6" D x 47.5" W x 28.4" H (11.7 x 120.7 x 72.1 cm) PMCP660 3.7" D x 57.2" W x 34.5" H (9.
C2938M (12/06) 37 Index A A.Swap button 19 AC power connection 9 Audio swap 30 Auto button 19 Automatic adjustment 28 C Color temperature 24 Component video input 9 Connecting component video input 10.
.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Ein wichtiger Punkt beim Kauf des Geräts Pelco PMCP660 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pelco PMCP660 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pelco PMCP660 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pelco PMCP660 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pelco PMCP660 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pelco PMCP660 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pelco PMCP660 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pelco PMCP660. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pelco PMCP660 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
