Benutzeranleitung / Produktwartung 12168 des Produzenten Patton electronic
Zur Seite of 24
USER MANUAL MODEL 1068 V ariab le Rate VLINK Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M1068-A Doc# 058111UA Revised 6/10/02 An ISO-9001Cer tified Company.
2 CONTENTS 1.0 Warranty Information ................................................................. 4 1.1 Radio and TV Interference ............................................................ 4 1.2 CE Notice ........................................
3 C.2 VDSL Interface ............................................................................ 23 RJ-45 .......................................................................................... 23 Terminal Block ...................................
4 1.0 W ARRANTY INFORMATION P atton Electronics warrants all Model 1068 components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the shipment.
5 1.3 FCC PART 68 (1068DV ONLY) This equipment complies with P art 68 of the FCC Rules. Please note the f ollowing: 1. Y ou are required to request service from the telephone company bef ore you connect the Model 1068D V to a network. When you request ser vice, y ou must pro vide the telephone company with the f ollowing data.
6 3. If your Model 1068D V causes harm to the telephone network, the telephone company ma y temporarily discontinue y our service. If possible , they will notify y ou in adv ance, b ut if adv ance notice is not practical, y ou will be notified as soon as possible and will be inf ormed of your right to file a complaint with the FCC.
7 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one year f or par ts and labor . If any questions or prob lems arise during installation or use of this product, contact P atton Electronics T echnical Suppor t at +1 (301) 975-1007.
8 passed transparently (unmodified) through the 1068s. The 1068s automat- ically add and delete MA C addresses , only passing pac k ets across the VDSL link that are meant f or the remote peered LAN. Figure 1. T ypical application The 1068D V/CO and 1068D V/CP work together to create a transparent e xtension betw een tw o peered Ethernet LANs.
9 3.0 INSTALLATION Because the Model 1068 requires no configuration, it can be installed quickly . If you are installing a standalone unit, ref er to section 3.1 “Standal- one unit installation”. Otherwise, ref er to section 3.2 “Rac k card installation”.
10 3.2 RACK CARD INSTALLATION The Model 1068 rac k card version comprises a front card and a rear card.Do the f ollowing to install the cards into the rac k chassis: 1. Slide the rear card into the back of the chassis along the metal r ails. 2. Secure the rear card using the supplied metal screws .
11 6. Connect the Ether net interface (ref er to section 3.4, “Connecting the 10/100Base-T Ethernet Interface” on page 12). 3.3 CONNECTING THE T WISTED-PAIR LINE INTERFACE The Model 1068 suppor ts communication between two peer Ethernet LAN sites ov er a distance of up to 6,652 ft (2.
12 The terminal block connector on the Model 1068's twisted pair interf ace is polarity insensitive and is wired f or a two-wire interf ace. The signal/pin relationships is shown in Figure 5. Figure 5. Model 1068D (T erminal Block) twisted pair line interf ace.
13 Connecting the 10/100Base-T Ethernet P ort to a Hub The Model 1068 10/100Base-T interf ace is configured as DTE (Data T er- minal Equipment), just like a 10/100Base-T netw ork interface card in a PC . Theref ore, it “expects” to connect to a 10/100Base-T Hub using a straight-through RJ-45 cab le.
14 work. The RJ-45 connector in the model 1068’ s POTS/ISDN interf ace is wired as shown in Figure 9. Figure 9. Model 1068D V (RJ-45) POTS/ISDN interf ace 3.6 CONNECTING POWER An e xternal AC or DC pow er supply is av ailab le separately . This connec- tion is made via the barrel jack on the rear panel of the Model 1068.
15 4.0 CONFIGURATION The Model 1068 has f our DIP s witches for configuring the unit for a wide variety of applications. This section descr ibes s witch locations and e xplains the diff erent configurations.
16 Figure 11. DIP switch orientation Figure 12. Rack card DIP s witch orientation S1 1234 ON 1234 ON Push toggle up for ON position Switch toggle Push toggle down for OFF position 1234 ON S1 S1 S1 Pow.
17 4.2 CONFIGURING DIP SWITCH S1 DIP s witch S1 is where you configure the VDSL line rate, symmetric or asymmetric, Ethernet full auto sense capability (100BaseT full or half duple x, 10BaseT full or half duple x) or limited auto sense (only 100BaseT half duple x, 10BaseT full or half duple x).
18 ON OFF OFF 12.5 Mbps ON OFF ON 16.67 Mbps T able 4: Asymmetric VDSL Line Rates Selection Chart S1-2 S1-3 S1-4 Asymmetric Line Rates DS/US OFF OFF ON 4.
19 5.0 OPERATION Once the Model 1068s are properly installed, they should operate trans- parently . No user settings required. This section describes reading the LED status monitors. 5.1 POWER UP Bef ore applying power to the Model 1068, please re view section 3.
20 Figure 14. Model 1068 rack card front panel T able 5: F ront panel LED description LED Description P ower Solid GREEN to indicate the unit is powered on. VLINK Link (Active Green) Solid g reen (ON) to indicate that the end-to-end VDSL link between the Model 1068s is established.
21 APPENDIX A SPECIFICATIONS A.1 LAN CONNECTION • Shielded RJ-45, 10/100Base-T , IEEE 802.3 Ethernet • VDSL Connection: RJ-45 and T er minal Block A.2 T RANSMISSION LINE T wo-wire unconditioned twisted pair. A.3 VDSL LINE RATE 16.67 Mbps, symmetric upstream/downstream.
22 APPENDIX B MODEL 1068 SERIES F ACTOR Y REPLACEMENT P AR TS AND ACCESSORIES *Only required with optional UI power supply (08055DCUI) P atton Model # Description Base Models 1068DRC/CO CO V ariable R.
23 APPENDIX C MODEL 1068 SERIES INTERF ACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection C.2 VDSL INTERFACE RJ-45 • Pin 4: RING • Pin 5: TIP • Pins 1, 2, 3, 6, 7, 8: no connection T erminal Block See Figure 5 on page 12.
24 APPENDIX D DIST ANCE CHAR T , BASED ON 24 A WG (0.5 MM) Cop yright © 2001, 2002 P atton Electronics Company All Rights Reser ved. Symm Line Rate (DS/US) Distance in feet (km) 6.25 Mbps 4,500 (1.37) 9.38 Mbps 4,150 (1.26) 12.5 Mbps 4,000 (1.22) 16.
Ein wichtiger Punkt beim Kauf des Geräts Patton electronic 12168 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Patton electronic 12168 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Patton electronic 12168 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Patton electronic 12168 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Patton electronic 12168 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Patton electronic 12168 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Patton electronic 12168 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Patton electronic 12168. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Patton electronic 12168 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
